Compare commits

..

725 Commits

Author SHA1 Message Date
Naman Sood
cd4e7e51a7 use net.JoinHostPort
Signed-off-by: Naman Sood <mail@nsood.in>
2021-04-21 14:44:07 -04:00
Naman Sood
6bb159d5fa wgengine/netstack: log ForwarderRequest in readable form, only in debug mode
Fixes #1757

Signed-off-by: Naman Sood <mail@nsood.in>
2021-04-21 14:31:46 -04:00
Brad Fitzpatrick
91c9c33036 cmd/tailscaled: don't block ipnserver startup behind engine init on Windows
With this change, the ipnserver's safesocket.Listen (the localhost
tcp.Listen) happens right away, before any synchronous
TUN/DNS/Engine/etc setup work, which might be slow, especially on
early boot on Windows.

Because the safesocket.Listen starts up early, that means localhost
TCP dials (the safesocket.Connect from the GUI) complete successfully
and thus the GUI avoids the MessageBox error. (I verified that
pacifies it, even without a Listener.Accept; I'd feared that Windows
localhost was maybe special and avoided the normal listener backlog).

Once the GUI can then connect immediately without errors, the various
timeouts then matter less, because the backend is no longer trying to
race against the GUI's timeout. So keep retrying on errors for a
minute, or 10 minutes if the system just booted in the past 10
minutes.

This should fix the problem with Windows 10 desktops auto-logging in
and starting the Tailscale frontend which was then showing a
MessageBox error about failing to connect to tailscaled, which was
slow coming up because the Windows networking stack wasn't up
yet. Fingers crossed.

Fixes #1313 (previously #1187, etc)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-20 22:26:27 -07:00
Alex Brainman
7d8f082ff7 .github/workflows: add --race tests on Linux and Windows
Updates #50
Updates #833

Signed-off-by: Alex Brainman <alex.brainman@gmail.com>
2021-04-20 21:50:26 -07:00
Alex Brainman
7689213aaa cmd/tailscaled: add subcommands to install and remove tailscaled Windows service
This change implements Windows version of install-system-daemon and
uninstall-system-daemon subcommands. When running the commands the
user will install or remove Tailscale Windows service.

Updates #1232

Signed-off-by: Alex Brainman <alex.brainman@gmail.com>
2021-04-20 21:40:59 -07:00
David Anderson
6fd9e28bd0 ipn/ipnlocal: add arpa suffixes to MagicDNS for reverse lookups.
This used to not be necessary, because MagicDNS always did full proxying.
But with split DNS, we need to know which names to route to our resolver,
otherwise reverse lookups break.

This captures the entire CGNAT range, as well as our Tailscale ULA.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 18:05:17 -07:00
David Anderson
89c81c26c5 net/dns: fix resolved match domains when no nameservers are provided.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 17:10:39 -07:00
David Anderson
4be26b269f net/dns: correctly capture all traffic in non-split configs.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 16:57:46 -07:00
David Anderson
ca283ac899 net/dns: remove config in openresolv when given an empty DNS config.
Part of #1720.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 16:19:34 -07:00
David Anderson
48d4f14652 ipn/ipnlocal: only set authoritative domains when using MagicDNS.
Otherwise, the existence of authoritative domains forces full
DNS proxying even when no other DNS config is present.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 15:52:19 -07:00
David Anderson
53213114ec net/dns: make debian_resolvconf correctly clear DNS configs.
More of #1720.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 15:51:14 -07:00
David Anderson
3b1ab78954 net/dns: restore resolv.conf when given an empty config in directManager.
Fixes #1720.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 15:14:40 -07:00
Brad Fitzpatrick
f99e63bb17 ipn: don't Logout when Windows GUI disconnects
Logout used to be a no-op, so the ipnserver previously synthensized a Logout
on disconnect. Now that Logout actually invalidates the node key that was
forcing all GUI closes to log people out.

Instead, add a method to LocalBackend to specifically mean "the
Windows GUI closed, please forget all the state".

Fixes tailscale/corp#1591 (ignoring the notification issues, tracked elsewhere)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-20 13:14:10 -07:00
David Anderson
158328ba24 net/dns: remove ForceSplitDNSForTesting.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 12:50:08 -07:00
David Anderson
1e5c608fae ipn/ipnlocal: plumb fallback DNS in as a workaround for split DNS issues.
Cause of #1743.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 12:49:48 -07:00
David Anderson
28ba20d733 tailcfg: add FallbackResolvers to DNSConfig.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 12:49:48 -07:00
Brad Fitzpatrick
3d0599fca0 ipn{,/ipnlocal}: in direct file receive mode, don't rename partial file
Let caller (macOS) do it so Finder progress bar can be dismissed
without races.

Updates tailscale/corp#1575

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-20 12:40:42 -07:00
Josh Bleecher Snyder
48e30bb8de wgengine/magicsock: remove named return
Doesn't add anything.

Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-04-20 10:12:07 -07:00
Josh Bleecher Snyder
a2a2c0ce1c wgengine/magicsock: fix two comments
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-04-20 10:12:07 -07:00
Josh Bleecher Snyder
b1e624ef04 wgengine/magicsock: remove unnecessary type assertions
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-04-20 10:12:07 -07:00
Josh Bleecher Snyder
98714e784b wgengine/magicsock: improve Rebind logging
We were accidentally logging oldPort -> oldPort.

Log oldPort as well as c.port; if we failed to get the preferred port
in a previous rebind, oldPort might differ from c.port.

Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-04-20 10:12:07 -07:00
Josh Bleecher Snyder
15ceacc4c5 wgengine/magicsock: accept a host and port instead of an addr in listenPacket
This simplifies call sites and prevents accidental failure to use net.JoinHostPort.

Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-04-20 10:12:07 -07:00
Brad Fitzpatrick
f42ded7acf cmd/tailscale/cli: relax & improve the running-as-CLI check for macOS
On macOS, we link the CLI into the GUI executable so it can be included in
the Mac App Store build.

You then need to run it like:

/Applications/Tailscale.app/Contents/MacOS/Tailscale <command>

But our old detection of whether you're running that Tailscale binary
in CLI mode wasn't accurate and often bit people. For instance, when
they made a typo, it then launched in GUI mode and broke their
existing GUI connection (starting a new IPNExtension) and took down
their network.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-20 09:18:33 -07:00
Brad Fitzpatrick
a58fbb4da9 ipn/ipnlocal: only fix peerapiListener on Windows when running
It's just logspam otherwise.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-20 09:18:33 -07:00
Maisem Ali
36fa29feec ipn/ipnlocal: restrict local lan access to linux machines.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-04-20 08:11:06 -07:00
Brad Fitzpatrick
8570f82c8b ipn/ipnlocal: finish/fix up filename validation & encoding on disk
It used to just store received files URL-escaped on disk, but that was
a half done lazy implementation, and pushed the burden to callers to
validate and write things to disk in an unescaped way.

Instead, do all the validation in the receive handler and only
accept filenames that are UTF-8 and in the intersection of valid
names that all platforms support.

Fixes tailscale/corp#1594

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-19 22:39:53 -07:00
Brad Fitzpatrick
7f8519c88f version: simplify iOS detection now that we require Go 1.16
See https://golang.org/doc/go1.16#darwin

No need for build tag tricks anymore.
2021-04-19 21:59:55 -07:00
Brad Fitzpatrick
cad8df500c ipn/ipnlocal: add some more peerapi handlePeerPut tests
Updates tailscale/corp#1594

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-19 21:01:04 -07:00
Brad Fitzpatrick
0d1550898e ipn/ipnlocal: add some peerapi tests
Updates tailscale/corp#1594

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-19 20:28:53 -07:00
Josh Bleecher Snyder
f72a120016 go.mod: upgrade to latest wireguard-go
Pull in minor upstream changes.

Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-04-19 13:30:43 -07:00
Naman Sood
71b7e48547 net/tsaddr: expand ephemeral nodes range to /64
Signed-off-by: Naman Sood <mail@nsood.in>
2021-04-19 15:54:53 -04:00
Brad Fitzpatrick
e9d24341e0 tailcfg, control/controlclient: accept nil MapResponse.Node (mapver 18)
All MapResponse fields can not be omitted and are tagged "omitempty".

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-19 11:53:21 -07:00
Brad Fitzpatrick
97204fdc52 safesocket: remove/update some old TODOs
Windows auth is done by looking at the owner of the TCP connection.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-19 11:35:02 -07:00
Brad Fitzpatrick
8f3e453356 ipn, cmd/tailscale/cli: add pref to configure sudo-free operator user
From discussion with @danderson.

Fixes #1684 (in a different way)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-19 10:12:41 -07:00
Brad Fitzpatrick
3739cf22b0 tailcfg, control/controlclient: allow empty MapResponse.Domain (mapver17)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-19 09:31:21 -07:00
Brad Fitzpatrick
5092cffd1f control/controlclient: add start of some MapResponse->NetworkMap tests
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-18 20:27:51 -07:00
Brad Fitzpatrick
aef3c0350c control/controlclient: break direct.go into map.go (+tests), add mapSession
So the NetworkMap-from-incremental-MapResponses can be tested easily.

And because direct.go was getting too big.

No change in behavior at this point. Just movement.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-18 19:56:03 -07:00
Brad Fitzpatrick
6d64107f26 types/netmap: remove some old TODOs
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-18 19:30:13 -07:00
Brad Fitzpatrick
49808ae6ea ipn{,/ipnlocal}, cmd/tailscale/cli: don't check pref reverts on initial up
The ipn.NewPrefs func returns a populated ipn.Prefs for historical
reasons. It's not used or as important as it once was, but it hasn't
yet been removed. Meanwhile, it contains some default values that are
used on some platforms. Notably, for this bug (#1725), Windows/Mac use
its Prefs.RouteAll true value (to accept subnets), but Linux users
have always gotten a "false" value for that, because that's what
cmd/tailscale's CLI default flag is _for all operating systems_.  That
meant that "tailscale up" was rightfully reporting that the user was
changing an implicit setting: RouteAll was changing from true with
false with the user explicitly saying so.

An obvious fix might be to change ipn.NewPrefs to return
Prefs.RouteAll == false on some platforms, but the logic is
complicated by darwin: we want RouteAll true on windows, android, ios,
and the GUI mac app, but not the CLI tailscaled-on-macOS mode. But
even if we used build tags (e.g. the "redo" build tag) to determine
what the default is, that then means we have duplicated and differing
"defaults" between both the CLI up flags and ipn.NewPrefs. Furthering
that complication didn't seem like a good idea.

So, changing the NewPrefs defaults is too invasive at this stage of
the release, as is removing the NewPrefs func entirely.

Instead, tweak slightly the semantics of the ipn.Prefs.ControlURL
field. This now defines that a ControlURL of the empty string means
both "we're uninitialized" and also "just use the default".

Then, once we have the "empty-string-means-unintialized" semantics,
use that to suppress "tailscale up"'s recent implicit-setting-revert
checking safety net, if we've never initialized Tailscale yet.

And update/add tests.

Fixes #1725

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-18 08:12:18 -07:00
Brad Fitzpatrick
4df6e62fbc ipn: add DefaultControlURL const, replace few literals with it
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-18 07:48:53 -07:00
Brad Fitzpatrick
f1d45bc4bb cmd/tailscale/cli: pull out prefsFromUpArgs for testability, add tests
Will add more tests later but this locks in all the existing warnings
and errors at least, and some of the existing non-error behavior.

Mostly I want this to exist before I actually fix #1725.

Updates #1725

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-17 20:59:33 -07:00
Brad Fitzpatrick
4948ff6ecb cmd/tailscale/cli: treat nil and non-nil zero length slices as equiv prefs
Updates #1725

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-17 19:17:18 -07:00
Brad Fitzpatrick
eb6115e295 cmd/tailscaled: let SOCKS5 dial non-Tailscale addrs in userspace mode
Fixes #1617

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-16 16:20:31 -07:00
Naman Sood
b85d80b37f net/tsaddr: add new IP range for ephemeral nodes in Tailscale ULA (#1715)
Signed-off-by: Naman Sood <mail@nsood.in>
2021-04-16 14:47:55 -04:00
Brad Fitzpatrick
b993d9802a ipn/ipnlocal, etc: require file sharing capability to send/recv files
tailscale/corp#1582

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-16 10:58:19 -07:00
Brad Fitzpatrick
2f422434aa cmd/tailscale/cli: wait on the right contexts in up
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-16 10:27:56 -07:00
Brad Fitzpatrick
6da812b4cf cmd/tailscale/cli: avoid a spammy log message on SIGINT
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-16 08:00:31 -07:00
Brad Fitzpatrick
670838c45f tailcfg, control/controlclient: (mapver 16) add Node.Online, MapResponse.OnlineChange
And fix PeerSeenChange bug where it was ignored unless there were
other peer changes.

Updates tailscale/corp#1574

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-15 20:07:24 -07:00
David Anderson
7055f870f8 control/controlclient: only use a single DNS label as the hostname.
Fixes #971

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-15 17:08:58 -07:00
Maisem Ali
4f3203556d wgengine/router: add the Tailscale ULA route on darwin.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-04-15 17:07:50 -07:00
Ross Zurowski
c748c20fba cmd/tailscale: fix command descriptions (#1710)
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
2021-04-15 18:33:23 -04:00
Brad Fitzpatrick
b34fbb24e8 logtail: reduce PublicID.UnmarshalText from 2 allocs to 0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-15 10:42:12 -07:00
David Anderson
bb0710d51d net/dns: add debugging traces to DNS manager selection on linux.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-14 15:52:41 -07:00
David Anderson
4b70c7b717 net/dns: fix inverted test for NetworkManager.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-14 15:52:22 -07:00
David Anderson
4849a4d3c8 net/dns: error out on linux if /etc/resolv.conf can't be read.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-14 15:35:32 -07:00
David Anderson
1f9b73a531 net/dns: fix freebsd DNS manager selection.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-14 15:34:59 -07:00
Naman Sood
5ea53891fe cmd/tailscaled: populate netstack variable to use dialer in SOCKS5
Signed-off-by: Naman Sood <mail@nsood.in>
2021-04-14 13:13:10 -04:00
Brad Fitzpatrick
d6a95d807a ipn/ipnlocal: advertise netstack to control server
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-14 09:38:33 -07:00
AdamKorcz
2243bb48c2 stun fuzzer: Small fix
Signed-off-by: AdamKorcz <adam@adalogics.com>
2021-04-14 08:17:46 -07:00
Brad Fitzpatrick
75b99555f3 cmd/tailscale/cli: let ip take a peername
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-14 08:13:16 -07:00
Brad Fitzpatrick
762180595d ipn/ipnstate: add PeerStatus.TailscaleIPs slice, deprecate TailAddr
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-14 08:12:31 -07:00
Brad Fitzpatrick
c2ca2ac8c4 net/dns: fix FreeBSD build
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 17:38:17 -07:00
David Anderson
84bd50329a net/dns: fix staticheck.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-13 17:28:37 -07:00
David Anderson
d6bb11b5bf net/dns: implement correct manager detection on linux.
Part of #953.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-13 17:19:00 -07:00
David Anderson
9ef932517b net/dns: fix NM's GetBaseConfig when no configs exist.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-13 17:19:00 -07:00
David Anderson
fe3b1ab747 net/dns: refactor dbus connection setup in resolved manager.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-13 17:19:00 -07:00
Brad Fitzpatrick
2df6372b67 portlist: de-dup services on same (proto, port) on both IPv4/IPv6
Fixes #1703

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 14:40:33 -07:00
Brad Fitzpatrick
a8d95a18b2 cmd/tailscale/cli: add up --unattended for Windows
RELNOTE=Windows CLI behavior change: ForceDaemon now off by default

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 11:40:31 -07:00
Brad Fitzpatrick
34d2f5a3d9 tailcfg: add Endpoint, EndpointType, MapRequest.EndpointType
Track endpoints internally with a new tailcfg.Endpoint type that
includes a typed netaddr.IPPort (instead of just a string) and
includes a type for how that endpoint was discovered (STUN, local,
etc).

Use []tailcfg.Endpoint instead of []string internally.

At the last second, send it to the control server as the existing
[]string for endpoints, but also include a new parallel
MapRequest.EndpointType []tailcfg.EndpointType, so the control server
can start filtering out less-important endpoint changes from
new-enough clients. Notably, STUN-discovered endpoints can be filtered
out from 1.6+ clients, as they can discover them amongst each other
via CallMeMaybe disco exchanges started over DERP. And STUN endpoints
change a lot, causing a lot of MapResposne updates. But portmapped
endpoints are worth keeping for now, as they they work right away
without requiring the firewall traversal extra RTT dance.

End result will be less control->client bandwidth. (despite negligible
increase in client->control bandwidth)

Updates tailscale/corp#1543

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 10:12:14 -07:00
Brad Fitzpatrick
b91f3c4191 ipn/ipnlocal: fix peerapi printf arg mismatch
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 08:56:26 -07:00
Brad Fitzpatrick
a08d978476 cmd/tailscale/cli: make push get peerapi base via localapi, not TSMP ping
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 08:50:16 -07:00
Brad Fitzpatrick
1dc2cf4835 cmd/tailscale/cli: add push --targets to list possible targets
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 08:36:14 -07:00
Brad Fitzpatrick
1f4cf1a4f4 ipn/localapi: only require read access to list file targets
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 08:35:16 -07:00
Brad Fitzpatrick
d17f96b586 cmd/tailscale/cli: restore SIGINT/SIGTERM on context cancel
This fixes Ctrl-C not interrupting "tailscale push".

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 08:34:42 -07:00
Brad Fitzpatrick
db5e269463 client/tailscale/apitype: move local API types to new apitype package
They were scattered/duplicated in misc places before.

It can't be in the client package itself for circular dep reasons.

This new package is basically tailcfg but for localhost
communications, instead of to control.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 08:13:46 -07:00
Maisem Ali
1b9d8771dc ipn/ipnlocal,wgengine/router,cmd/tailscale: add flag to allow local lan access when routing traffic via an exit node.
For #1527

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-04-12 17:29:01 -07:00
David Anderson
854d5d36a1 net/dns: return error from NewOSManager, use it to initialize NM.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-12 15:51:37 -07:00
Maisem Ali
4d142ebe06 derp: handle net.ErrClosed in TestSendFreeze
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-04-12 15:23:36 -07:00
Brad Fitzpatrick
8e75c8504c ipn/ipnlocal: in direct file mode, don't readdir
And don't even allow attempts at Open/Delete.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 15:12:47 -07:00
Brad Fitzpatrick
9972c02b60 cmd/tailscale/cli: don't let up change prefs based on implicit flag values
This changes the behavior of "tailscale up".

Previously "tailscale up" always did a new Start and reset all the settings.

Now "tailscale up" with no flags just brings the world [back] up.
(The opposite of "tailscale down").

But with flags, "tailscale up" now only is allowed to change
preferences if they're explicitly named in the flags. Otherwise it's
an error. Or you need to use --reset to explicitly nuke everything.

RELNOTE=tailscale up change

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 14:39:47 -07:00
David Anderson
9aa33b43e6 net/dns: support split and unsplit DNS in NetworkManager.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-12 14:34:08 -07:00
Brad Fitzpatrick
f5742b0647 ipn/ipnlocal: add LocalBackend.SetDirectFileRoot
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 14:29:45 -07:00
Brad Fitzpatrick
64c80129f1 types/netmap: add some docs/warning to NetworkMap
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 12:49:25 -07:00
Brad Fitzpatrick
ccb322db04 tailcfg, control/controlclient: make nil MapResponse.DNSConfig mean unchanged (mapver15)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 12:46:32 -07:00
Brad Fitzpatrick
a3113a793a ipn: add hostname to Prefs.Pretty output
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 10:45:33 -07:00
Brad Fitzpatrick
4c3f7c06fc ipn/ipnlocal: be consistent in not logging when no notify registered
Some paths already didn't. And in the future I hope to shut all the
notify funcs down end-to-end when nothing is connected (as in the
common case in tailscaled).  Then we can save some JSON encoding work.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 10:38:51 -07:00
Brad Fitzpatrick
7c0e58c537 ipn/ipnlocal: remove redundant notify nil check
send does it.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 10:38:51 -07:00
Brad Fitzpatrick
d9ee9a0d3f ipn: set BackendServer's notify earlier; don't require Start
We've been slowly making Start less special and making IPN a
multi-connection "watch" bus of changes, but this Start specialness
had remained.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 10:38:51 -07:00
Brad Fitzpatrick
8e4d1e3f2c ipn: include err in Notify decode fatal path
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 10:38:51 -07:00
Brad Fitzpatrick
d5d70ae9ea wgengine/monitor: reduce Linux log spam on down
Fixes #1689

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 10:38:51 -07:00
Brad Fitzpatrick
c0befee188 portlist: use windows OpenCurrentProcessToken, not GetCurrentProcessToken
The latter only works on Windows 8+.

Also add a TODO to get do this all more efficiently.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 09:23:52 -07:00
Brad Fitzpatrick
e619296ece portlist: filter out all of 127.0.0.0/8, not just 127.0.0.1/32
Per user private bug report.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 09:17:39 -07:00
Brad Fitzpatrick
f325aa7e38 portlist: exclude services bound to IPv6 loopback address
Fixes #1683

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 09:07:16 -07:00
David Anderson
87eb8384f5 net/dns: fix up NetworkManager configurator a bit.
Clear LLMNR and mdns flags, update reasoning for our settings,
and set our override priority harder than before when we want
to be primary resolver.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-11 23:19:50 -07:00
Brad Fitzpatrick
303805a389 ipn/localapi: require write access to PATCH prefs
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-11 21:31:20 -07:00
David Anderson
3d81e6260b net/dns: set resolved DefaultRoute setting according to split-dns mode.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-11 20:53:28 -07:00
David Anderson
cca230cc23 net/dns: fix staticcheck errors.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-11 20:53:28 -07:00
Brad Fitzpatrick
79109f4965 ipn/ipnlocal: use PATCH for EditPrefs, not POST
Addendum to earlier 00d641d9fc.

Reserve POST for SetPrefs in the future.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-11 20:49:07 -07:00
Brad Fitzpatrick
4b47393e0c net/dns: pacify staticcheck for now
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-11 20:43:15 -07:00
David Anderson
a7340c2015 net/dns: support split DNS in systemd-resolved.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-11 18:14:23 -07:00
Brad Fitzpatrick
00d641d9fc ipn/localapi: move EditPrefs to localapi
Follow-up/revision to recent 53cfff109b which
added EditPrefs.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-11 16:11:43 -07:00
David Anderson
84430cdfa1 net/dns: improve NetworkManager detection, using more DBus.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-11 15:22:06 -07:00
David Anderson
9a48bac8ad net/dns: rename resolvconf.go to debian_resolvconf.go.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 23:31:14 -07:00
David Anderson
9831f1b183 net/dns: also include 'tail' and 'base' files when fixing up resolv.conf.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 23:01:11 -07:00
David Anderson
e43afe9140 net/dns: implement prior config reading for debian resolvconf.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 22:37:13 -07:00
David Anderson
143e5dd087 net/dns: rename script variable.
Debian resolvconf is not legacy, it's alive and well,
just historically before the other implementations.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 21:28:27 -07:00
David Anderson
55b39fa945 net/dns: add documentation to openresolv's config fetch.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 20:21:05 -07:00
David Anderson
61b361bac0 net/dns: teach the openresolv manager to read DNS config.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 19:37:11 -07:00
David Anderson
19eca34f47 wgengine/router: fix FreeBSD configuration failure on the v6 /48.
On FreeBSD, we add the interface IP as a /48 to work around a kernel
bug, so we mustn't then try to add a /48 route to the Tailscale ULA,
since that will fail as a dupe.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 19:36:26 -07:00
David Anderson
58760f7b82 net/dns: split resolvconfManager into a debian and an openresolv manager.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 18:55:05 -07:00
David Anderson
5480189313 net/dns: implement a DNS override workaround for legacy resolvconf.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 17:58:13 -07:00
David Anderson
1a371b93be util/dnsname: add FQDN type, use throughout codebase.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 17:58:13 -07:00
AdamKorcz
7a1813fd24 Added 2 fuzzers
Signed-off-by: AdamKorcz <adam@adalogics.com>
2021-04-10 11:40:10 -07:00
Daniel Chung
5e90037f1a api.md: clarify response behaviour for ACL POST endpoint
Signed-off-by: Daniel Chung <daniel@tailscale.com>
2021-04-10 11:38:12 -07:00
Simon Kirillov
a64b57e2fb control/controlclient: create tls client config with server hostname instead of serverURL.Host
Signed-off-by: Simon Kirillov <svkirillov3@gmail.com>
2021-04-10 11:20:10 -07:00
Brad Fitzpatrick
958782c737 cmd/{tailscale,tailscaled}: use netstack for subnet routing on Synology
Updates #707
Fixes #451
Fixes tailscale/tailscale-synology#52 (just make it work by default)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 18:44:33 -07:00
Brad Fitzpatrick
3b451509dd cmd/tailscale/cli: make advertise-{routes,exit-node} available unconditionally
It was only Linux and BSDs before, but now with netstack mode, it also works on
Windows and darwin. It's not worth limiting it to certain platforms.

Tailscaled itself can complain/fail if it doesn't like the settings
for the mode/OS it's operating under.

Updates #707

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 18:37:24 -07:00
Brad Fitzpatrick
83402e2753 cmd/tailscale/cli: show nicer status output when logged out
Also nicer output when running "down".

Fixes #1680

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 18:25:22 -07:00
Brad Fitzpatrick
5c5acadb2a portlist: unexport SameInodes method
Signed-off-by: Brad Fitzpatrick <brad@danga.com>
2021-04-09 15:16:36 -07:00
Brad Fitzpatrick
3167e55ddf ipn/{ipnlocal,localapi}, cmd/tailscale: add logout command
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 13:26:35 -07:00
Brad Fitzpatrick
11127666b2 ipn/ipnlocal: fix deadlock from 227f73284
Sigh.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 13:23:34 -07:00
Brad Fitzpatrick
227f73284f ipn/ipnlocal: eagerly announce peerapi service(s) on change
We were previously only doing it as a side effect of the port poller,
which doesn't run on e.g. iOS.

Updates tailscale/corp#1559
2021-04-09 12:10:52 -07:00
Brad Fitzpatrick
fe23506471 ipn/ipnlocal: avoid unneeded initPeerAPIListener work if no changes
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 11:13:46 -07:00
Brad Fitzpatrick
20e7646b8d ipn/ipnlocal: always set Notify.FilesWaiting, set IncomingFiles non-nil when empty 2021-04-09 07:59:36 -07:00
Brad Fitzpatrick
b0af15ff5c portlist: remove some old TODOs
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 07:50:00 -07:00
David Anderson
e638a4d86b net/dns: make directManager support split DNS, and work in sandboxes.
Fixes #1495, #683.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-09 02:52:21 -07:00
David Anderson
2685260ba1 net/dns: add temporary fallback to quad-9 resolver for split-DNS testing.
This allows split-DNS configurations to not break clients on OSes that
haven't yet been ported to understand split DNS, by falling back to quad-9
as a global resolver when handed an "impossible to implement"
split-DNS config.

Part of #953. Needs to be removed before shipping 1.8.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-08 23:26:22 -07:00
David Anderson
b9e194c14b net/dns: add missing FQDN qualification.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-08 23:07:16 -07:00
Brad Fitzpatrick
c50c3f0313 tailcfg: document new RegisterRequest.Expiry behavior
Deployed to control server.

For upcoming "logout" command and fixes.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-08 22:27:14 -07:00
David Anderson
b74a8994ca net/dns: make FQDN dot style consistent in more places.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-08 22:03:32 -07:00
Brad Fitzpatrick
6d01d3bece ipn/ipnlocal: provide IPN bus updates as files arrive
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-08 20:09:52 -07:00
David Anderson
2f398106e2 ipn/ipnlocal: allow setting MagicDNS without DefaultResolvers.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-08 16:23:33 -07:00
David Anderson
fad21af01c tailcfg: add DNS routes and advanced resolver config.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-08 15:29:08 -07:00
Brad Fitzpatrick
6a7912e37a cmd/tailscale/cli: add debug mode to push slowly for testing
Also set Content-Length when known, and fail explicitly on sending
directories for now.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-08 15:01:12 -07:00
Brad Fitzpatrick
a9a3d3b4c1 ipn/ipnlocal: don't filter by time in FileTargets
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-08 14:02:07 -07:00
David Anderson
6def647514 net/dns/resolver: don't avoid tailscale routes for DNS forwarding.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-08 12:20:42 -07:00
Brad Fitzpatrick
597c19ff4e control/controlclient: refactor some internals
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 21:20:17 -07:00
Brad Fitzpatrick
71432c6449 ipn/ipnlocal: some more variable renames
Missed in earlier commit.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 21:17:33 -07:00
Brad Fitzpatrick
e86b7752ef ipn/ipnlocal: rename some variables to be consistent
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 21:12:28 -07:00
David Anderson
4a64d2a603 net/dns: some post-review cleanups.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-07 15:40:31 -07:00
David Anderson
720c1ad0f0 net/dns: insert OS base config when emulating split DNS.
Part of #953.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-07 15:40:31 -07:00
David Anderson
e560be6443 net/dns: sort matchDomains to avoid test flake.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-07 15:40:31 -07:00
David Anderson
68f76e9aa1 net/dns: add GetBaseConfig to OSConfigurator interface.
Part of #953, required to make split DNS work on more basic
platforms.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-07 15:40:31 -07:00
David Anderson
fe9cd61d71 net/dns: add tests for DNS config generation.
Part of #953.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-07 15:40:31 -07:00
David Anderson
0ba6d03768 net/dns/resolver: add a test helper to get at the resolver config.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-07 15:40:31 -07:00
David Anderson
da4cc8bbb4 net/dns: handle all possible translations of high-level DNS config.
With this change, all OSes can sort-of do split DNS, except that the
default upstream is hardcoded to 8.8.8.8 pending further plumbing.
Additionally, Windows 8-10 can do split DNS fully correctly, without
the 8.8.8.8 hack.

Part of #953.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-07 15:40:31 -07:00
Brad Fitzpatrick
939861773d net/tstun: accept peerapi connections through the filter
Fixes tailscale/corp#1545

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 12:29:20 -07:00
Brad Fitzpatrick
950fc28887 ipn, paths, cmd/tailscaled: remove LegacyConfigPath, relaynode migration
It is time.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 10:15:45 -07:00
Brad Fitzpatrick
d581ee2536 ipn: remove Options.HTTPTestClient, move to LocalBackend
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 09:20:51 -07:00
Brad Fitzpatrick
50b309c1eb ipn/localapi, cmd/tailscale: add API to get prefs, CLI debug command to show
Updates #1436

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 08:28:11 -07:00
Brad Fitzpatrick
03be116997 client/tailscale: factor out some helpers to reduce boilerplate
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 08:19:36 -07:00
Brad Fitzpatrick
d4b609e138 cmd/tailscale/cli: fix bug in earlier tailscale debug --local-creds addition
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 08:01:04 -07:00
Adrian Dewhurst
3f456ba2e7 control/controlclient: return correct certificate
When searching for the matching client identity, the returned
certificate chain was accidentally set to that of the last identity
returned by the certificate store instead of the one corresponding to
the selected identity.

Also, add some extra error checking for invalid certificate chains, just
in case.

Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
2021-04-07 09:42:13 -04:00
Brad Fitzpatrick
799973a68d ipn: move Options.Notify to its own method
We already had SetNotifyCallback elsewhere on controlclient, so use
that name.

Baby steps towards some CLI refactor work.

Updates tailscale/tailscale#1436
2021-04-06 22:12:40 -07:00
Brad Fitzpatrick
d488678fdc cmd/tailscaled, wgengine{,/netstack}: add netstack hybrid mode, add to Windows
For #707

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-06 21:37:28 -07:00
Brad Fitzpatrick
1f99f889e1 ipn/{ipnlocal,localapi}: add localapi handler to dial/proxy file PUTs
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-06 21:31:50 -07:00
Denton Gentry
3089081349 monitor/polling: reduce Cloud Run polling interval.
Cloud Run's routes never change at runtime. Don't poll it for
route changes very often.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-04-06 17:21:16 -07:00
Denton Gentry
224e60cef2 hostifo: update LXC, add Cloud Run.
Recent LXC support no longer has "lxc" in /proc/1/cgroup:
    # cat /proc/1/cgroup
    12:freezer:/
    11:rdma:/
    10:cpuset:/
    9:pids:/
    8:blkio:/
    7:devices:/
    6:perf_event:/
    5:net_cls,net_prio:/
    4:memory:/
    3:hugetlb:/
    2:cpu,cpuacct:/
    1:name=systemd:/init.scope
    0::/init.scope

Look for fuse.lxcfs in /proc.mounts in addition:
    # grep lxc /proc/mounts
    lxcfs /proc/cpuinfo fuse.lxcfs ...
    lxcfs /proc/diskstats fuse.lxcfs ...
    lxcfs /proc/loadavg fuse.lxcfs ...
    lxcfs /proc/meminfo fuse.lxcfs ...
    lxcfs /proc/stat fuse.lxcfs ...
    lxcfs /proc/swaps fuse.lxcfs ...
    lxcfs /proc/uptime fuse.lxcfs ...
    lxcfs /sys/devices/system/cpu/online fuse.lxcfs ...

Add Knative detection by looking for the environment variables
which are part of its container contract.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-04-06 17:21:16 -07:00
Maisem Ali
57756ef673 net/nettest: make nettest.NewConn pass x/net/nettest.TestConn.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-04-06 15:34:29 -07:00
David Anderson
e0e677a8f6 net/dns: split out search domains and match domains in OSConfig.
It seems that all the setups that support split DNS understand
this distinction, and it's an important one when translating
high-level configuration.

Part of #953.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-06 15:27:09 -07:00
David Anderson
a8dcda9c9a net/dns: start of compat hacks for Windows 7.
Correctly reports that Win7 cannot do split DNS, and has a helper to
discover the "base" resolvers for the system.

Part of #953

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-06 15:27:09 -07:00
Brad Fitzpatrick
ea9e68280d cmd/tailscale/cli: add debug command to print localapi curl command 2021-04-06 14:05:49 -07:00
Brad Fitzpatrick
d717499ac4 ipn/localapi: add API for getting file targets
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-06 11:01:30 -07:00
David Anderson
3e915ac783 net/dns: implement OS-level split DNS for Windows.
Part of #953.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 22:53:10 -07:00
David Anderson
c16a926bf2 net/dns: set OSConfig.Primary.
OS implementations are going to support split DNS soon.
Until they're all in place, hardcode Primary=true to get
the old behavior.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 22:53:10 -07:00
David Anderson
bc4381447f net/tstun: return the real interface name at device creation.
This is usually the same as the requested interface, but on some
unixes can vary based on device number allocation, and on Windows
it's the GUID instead of the pretty name, since everything relating
to configuration wants the GUID.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 22:53:10 -07:00
David Crawshaw
d2f838c058 ipn/localapi: 404 on bad endpoints
Confused us for a while!

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-04-05 15:09:54 -07:00
David Anderson
de6dc4c510 net/dns: add a Primary field to OSConfig.
Currently ignored.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 13:05:47 -07:00
David Anderson
b2a597b288 net/dns: rename Set to SetDNS in OSConfigurator.
wgengine/router.CallbackRouter needs to support both the Router
and OSConfigurator interfaces, so the setters can't both be called
Set.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 10:55:35 -07:00
David Anderson
7d84ee6c98 net/dns: unify the OS manager and internal resolver.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 10:55:35 -07:00
David Anderson
1bf91c8123 net/dns/resolver: remove unused err return value.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 10:55:35 -07:00
David Anderson
6a206fd0fb net/dns: rename impl to os.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 10:55:35 -07:00
David Anderson
c4530971db net/dns/resolver: remove leftover debug print.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 10:55:35 -07:00
David Anderson
f007a9dd6b health: add DNS subsystem and plumb errors in.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 10:55:35 -07:00
David Anderson
4c61ebacf4 wgengine: move DNS configuration out of wgengine/router.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 10:55:35 -07:00
Josh Bleecher Snyder
7183e1f052 go.mod: update wireguard-go again
To pick up https://go-review.googlesource.com/c/sys/+/307129.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-04-03 10:35:17 -07:00
Josh Bleecher Snyder
ba72126b72 wgengine/magicsock: remove RebindingUDPConn.FakeClosed
It existed to work around the frequent opening and closing
of the conn.Bind done by wireguard-go.
The preceding commit removed that behavior,
so we can simply close the connections
when we are done with them.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-04-03 10:32:51 -07:00
Josh Bleecher Snyder
69cdc30c6d wgengine/wgcfg: remove Config.ListenPort
We don't use the port that wireguard-go passes to us (via magicsock.connBind.Open).
We ignore it entirely and use the port we selected.

When we tell wireguard-go that we're changing the listen_port,
it calls connBind.Close and then connBind.Open.
And in the meantime, it stops calling the receive functions,
which means that we stop receiving and processing UDP and DERP packets.
And that is Very Bad.

That was never a problem prior to b3ceca1dd7,
because we passed the SkipBindUpdate flag to our wireguard-go fork,
which told wireguard-go not to re-bind on listen_port changes.
That commit eliminated the SkipBindUpdate flag.

We could write a bunch of code to work around the gap.
We could add background readers that process UDP and DERP packets when wireguard-go isn't.
But it's simpler to never create the conditions in which wireguard-go rebinds.

The other scenario in which wireguard-go re-binds is device.Down.
Conveniently, we never call device.Down. We go from device.Up to device.Close,
and the latter only when we're shutting down a magicsock.Conn completely.

Rubber-ducked-by: Avery Pennarun <apenwarr@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-04-03 10:32:51 -07:00
David Anderson
748670f1e9 net/dns: fix typo in docstring.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-02 18:44:02 -07:00
David Anderson
27a1a2976a wgengine/router: add a CallbackRouter shim.
The shim implements both network and DNS configurators,
and feeds both into a single callback that receives
both configs.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-02 18:43:24 -07:00
David Anderson
f89dc1c903 ipn/ipnlocal: don't install any magicdns names if not proxying.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-02 14:24:47 -07:00
Josh Bleecher Snyder
63c00764e1 go.mod: update to latest wireguard-go and x/sys
To fix windows checkptr failures.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-04-02 12:44:16 -07:00
Josh Bleecher Snyder
b3ceca1dd7 wgengine/...: split into multiple receive functions
Upstream wireguard-go has changed its receive model.
NewDevice now accepts a conn.Bind interface.

The conn.Bind is stateless; magicsock.Conns are stateful.
To work around this, we add a connBind type that supports
cheap teardown and bring-up, backed by a Conn.

The new conn.Bind allows us to specify a set of receive functions,
rather than having to shoehorn everything into ReceiveIPv4 and ReceiveIPv6.
This lets us plumbing DERP messages directly into wireguard-go,
instead of having to mux them via ReceiveIPv4.

One consequence of the new conn.Bind layer is that
closing the wireguard-go device is now indistinguishable
from the routine bring-up and tear-down normally experienced
by a conn.Bind. We thus have to explicitly close the magicsock.Conn
when the close the wireguard-go device.

One downside of this change is that we are reliant on wireguard-go
to call receiveDERP to process DERP messages. This is fine for now,
but is perhaps something we should fix in the future.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-04-02 12:18:54 -07:00
Brad Fitzpatrick
2074dfa5e0 types/preftype: don't use iota for consts persisted to disk
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-02 09:02:54 -07:00
Brad Fitzpatrick
9b57cd53ba ipn/ipnlocal: lazily connect to control, lazily generate machine key
Fixes #1573

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-02 08:21:40 -07:00
Brad Fitzpatrick
d50406f185 ipn/ipnlocal: simplify loadStateLocked control flow a bit, restore logging
The common Linux start-up path (fallback file defined but not
existing) was missing the log print of initializing Prefs. The code
was too twisty. Simplify a bit.

Updates #1573

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-02 07:56:07 -07:00
David Anderson
a39d2403bc net/dns: disable NetworkManager and resolved configurators temporarily.
They need some rework to do the right thing, in the meantime the direct
and resolvconf managers will work out.

The resolved implementation was never selected due to control-side settings.
The networkmanager implementation mostly doesn't get selected due to
unforeseen interactions with `resolvconf` on many platforms.
Both implementations also need rework to support the various routing modes
they're capable of.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-02 02:41:33 -07:00
David Anderson
befd8e4e68 net/dns: replace managerImpl with OSConfigurator in code.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-02 02:34:40 -07:00
David Anderson
077d4dc8c7 net/dns: add an OSConfigurator interface.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-02 01:49:17 -07:00
David Anderson
6ad44f9fdf wgengine: take in dns.Config, split out to resolver.Config and dns.OSConfig.
Stepping stone towards having the DNS package handle the config splitting.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-02 00:59:44 -07:00
David Anderson
2edb57dbf1 net/dns: add new Config that captures tailscale+OS DNS config.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-02 00:59:44 -07:00
David Anderson
8af9d770cf net/dns: rename Config to OSConfig.
Making way for a new higher level config struct.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-02 00:59:44 -07:00
David Anderson
fcfc0d3a08 net/dns: remove ManagerConfig, pass relevant args directly.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-01 23:26:52 -07:00
David Anderson
0ca04f1e01 net/dns: put noop.go back, limit with build tags for staticcheck.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-01 23:14:13 -07:00
David Anderson
95470c3448 net/dns: remove Cleanup manager parameter.
It's only use to skip some optional initialization during cleanup,
but that work is very minor anyway, and about to change drastically.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-01 23:06:56 -07:00
David Anderson
cf361bb9b1 net/dns: remove PerDomain from Config.
It's currently unused, and no longer makes sense with the upcoming
DNS infrastructure. Keep it in tailcfg for now, since we need protocol
compat for a bit longer.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-01 22:55:44 -07:00
David Anderson
f77ba75d6c wgengine/router: move DNS cleanup into the DNS package.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-01 22:35:34 -07:00
David Anderson
15875ccc63 wgengine/router: don't store unused tunname on windows. 2021-04-01 22:28:24 -07:00
Brad Fitzpatrick
6266cf8e36 ipn/ipnlocal: fix peerapi6 port being report as 0 in netstack mode
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-01 22:04:46 -07:00
David Anderson
9f105d3968 net/dns/resolver: teach the forwarder to do per-domain routing.
Given a DNS route map, the forwarder selects the right set of
upstreams for a given name.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-01 19:42:48 -07:00
David Crawshaw
4ed111281b version/distro: look for absolute synology path
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-04-01 17:21:36 -07:00
Brad Fitzpatrick
2f60ab92dd tailcfg: add Node.Capabilities, remove old stuff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-01 15:09:08 -07:00
Brad Fitzpatrick
c25ecddd1b tailcfg: remove UserProfile.Roles field, add tests for legacy behavior
Old macOS clients required we populate this field to a non-null
value so we were unable to remove this field before.

Instead, keep the field but change its type to a custom empty struct
that can marshal/unmarshal JSON. And lock it in with a test.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-01 14:54:55 -07:00
Brad Fitzpatrick
e698973196 ipn/policy: mark peerapi4 and peerapi6 as interesting services 2021-04-01 11:57:24 -07:00
Brad Fitzpatrick
39b9ab3522 cmd/tailscaled: rename isUserspace to useNetstack
The bool was already called useNetstack at the caller.
isUserspace (to mean netstack) is confusing next to wgengine.NewUserspaceEngine, as that's
a different type of 'userspace'.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-01 11:18:03 -07:00
Josh Bleecher Snyder
34d4943357 all: gofmt -s
The code is not obviously better or worse, but this makes the little warning
triangle in my editor go away, and the distraction removal is worth it.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-04-01 11:06:14 -07:00
Josh Bleecher Snyder
1df162b05b wgengine/magicsock: adapt CreateEndpoint signature to match wireguard-go
Part of a temporary change to make merging wireguard-go easier.
See https://github.com/tailscale/wireguard-go/pull/45.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-04-01 09:55:45 -07:00
Brad Fitzpatrick
e64383a80e wgengine/router: document some fields a bit more
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-01 07:50:50 -07:00
Denton Gentry
35ab4020c7 wgengine/monitor: Linux fall back to polling
Google Cloud Run does not implement NETLINK_ROUTE RTMGRP.
If initialization of the netlink socket or group membership
fails, fall back to a polling implementation.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-04-01 07:29:11 -07:00
David Anderson
90f82b6946 net/dns/resolver: add live reconfig, plumb through to ipnlocal.
The resolver still only supports a single upstream config, and
ipn/wgengine still have to split up the DNS config, but this moves
closer to unifying the DNS configs.

As a handy side-effect of the refactor, IPv6 MagicDNS records exist
now.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-01 01:44:03 -07:00
David Anderson
caeafc4a32 net/dns/resolver: fix package docstring.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-31 23:42:28 -07:00
David Anderson
dbe4f6f42d net/dns/resolver: unexport Resolve and ResolveReverse.
They're only used internally and in tests, and have surprising
semantics in that they only resolve MagicDNS names, not upstream
resolver queries.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-31 23:35:26 -07:00
David Anderson
cdeb8d6816 net/dns/resolver: fix staticcheck error.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-31 23:19:09 -07:00
David Anderson
f185d62dc8 net/dns/resolver: unexport Packet, only use it internally.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-31 23:12:31 -07:00
David Anderson
5fb9e00ecf net/dns/resolver: remove Start method, fully spin up in New instead.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-31 23:12:31 -07:00
David Anderson
075fb93e69 net/dns/resolver: remove the Config struct.
In preparation for reintroducing a runtime reconfig Config struct.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-31 23:12:31 -07:00
David Anderson
bc81dd4690 net/dns/resolver: rename ResolverConfig to just Config.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-31 23:12:31 -07:00
David Anderson
d99f5b1596 net/dns/resolver: factor the resolver out into a sub-package.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-31 23:12:30 -07:00
Brad Fitzpatrick
53cfff109b ipn: replace SetWantRunning(bool) with EditPrefs(MaskedPrefs)
This adds a new ipn.MaskedPrefs embedding a ipn.Prefs, along with a
bunch of "has bits", kept in sync with tests & reflect.

Then it adds a Prefs.ApplyEdits(MaskedPrefs) method.

Then the ipn.Backend interface loses its weirdo SetWantRunning(bool)
method (that I added in 483141094c for "tailscale down")
and replaces it with EditPrefs (alongside the existing SetPrefs for now).

Then updates 'tailscale down' to use EditPrefs instead of SetWantRunning.

In the future, we can use this to do more interesting things with the
CLI, reconfiguring only certain properties without the reset-the-world
"tailscale up".

Updates #1436

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 22:14:11 -07:00
Brad Fitzpatrick
4ed6b62c7a ipn/ipnlocal: refactor to unindent a bit
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 16:03:23 -07:00
Brad Fitzpatrick
1f583a895e ipn/ipnlocal: stop sending machine key to frontends
We were going to remove this in Tailscale 1.3 but forgot.

This means Tailscale 1.8 users won't be able to downgrade to Tailscale
1.0, but that's fine.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 15:51:51 -07:00
Maisem Ali
1c98c5f103 cmd/tailscaled: remove tailscaled binary on uninstall-system-daemon
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-03-31 15:44:04 -07:00
Maisem Ali
db13b2d0c8 cmd/tailscale, ipn/localapi: add "tailscale bugreport" subcommand
Adding a subcommand which prints and logs a log marker. This should help
diagnose any issues that users face.

Fixes #1466

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-03-31 15:19:51 -07:00
Denton Gentry
09148c07ba interfaces: check correct error /proc/net/route
wrap io.EOF if we hit https://github.com/google/gvisor/issues/5732
Check for the correct err.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-03-31 14:37:26 -07:00
Brad Fitzpatrick
47363c95b0 go.mod: bump wireguard-go 2021-03-31 14:20:45 -07:00
Brad Fitzpatrick
c3bee0b722 ipn/ipnlocal: make peerapi work on iOS again
It didn't have a storage directory.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 14:09:06 -07:00
Naman Sood
31c7745631 wgengine/netstack: stop re-adding IPs registered by active TCP connections (#1629)
Signed-off-by: Naman Sood <mail@nsood.in>
2021-03-31 15:32:33 -04:00
Brad Fitzpatrick
1bd14a072c cmd/tailscale, ipn/localapi: move IP forwarding check to tailscaled, API
Instead of having the CLI check whether IP forwarding is enabled, ask
tailscaled. It has a better idea. If it's netstack, for instance, the
sysctl values don't matter. And it's possible that only the daemon has
permission to know.

Fixes #1626

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 12:09:16 -07:00
David Crawshaw
ea714c6054 cmd/tailscale/cli: split out web.css file
CSS formatted with:

	npx prettier --use-tabs --write cmd/tailscale/cli/web.css

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-03-31 10:48:05 -07:00
Brad Fitzpatrick
7f03c0f8fe wgengine/wgcfg/nmcfg: reduce some logging when a /0 route skipped
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 09:51:55 -07:00
Josh Bleecher Snyder
7b907615d5 wgengine/wgcfg/nmcfg: remove dead code
The call to appendEndpoint updates cpeer.Endpoints.
Then it is overwritten in the next line.
The only errors from appendEndpoint occur when
the host/port pair is malformed, but that cannot happen.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-03-31 09:09:19 -07:00
Brad Fitzpatrick
a998fe7c3d control/controlclient: support lazy machine key generation
It's not done in the caller yet, but the controlclient does it now.

Updates #1573

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 08:52:57 -07:00
Ross Zurowski
8d57bce5ef cmd/tailscale: add initial web UI (#1621)
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
2021-03-31 11:32:33 -04:00
Brad Fitzpatrick
ddaacf0a57 control/controlclient: document a few things
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 08:26:05 -07:00
Brad Fitzpatrick
cf2beafbcd ipn/ipnlocal: on Windows peerapi bind failures, try again on link change
Updates #1620

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 13:49:37 -07:00
Brad Fitzpatrick
a7be780155 go.mod, go.sum: bump wireguard-go 2021-03-30 13:05:23 -07:00
Brad Fitzpatrick
6d1a9017c9 ipn/{ipnlocal,localapi}, client/tailscale: add file get/delete APIs
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 12:56:51 -07:00
Denton Gentry
a9745a0b68 interfaces: try larger read from /proc/net/route
Work around https://github.com/google/gvisor/issues/5732
by trying to read /proc/net/route with a larger bufsize if
it fails the first time.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-03-30 12:33:53 -07:00
Denton Gentry
54ba6194f7 interfaces: allow IPv6 ULA as a valid address.
IPv6 Unique Local Addresses are sometimes used with Network
Prefix Translation to reach the Internet. In that respect
their use is similar to the private IPv4 address ranges
10/8, 172.16/12, and 192.168/16.

Treat them as sufficient for AnyInterfaceUp(), but specifically
exclude Tailscale's own IPv6 ULA prefix to avoid mistakenly
trying to bootstrap Tailscale using Tailscale.

This helps in supporting Google Cloud Run, where the addresses
are 169.254.8.1/32 and fddf:3978:feb1:d745::c001/128 on eth1.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-03-30 12:33:53 -07:00
Denton Gentry
ecf310be3c net/tsaddr: IsUla() for IPv6 Unique Local Address
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-03-30 12:33:53 -07:00
Josh Bleecher Snyder
36a85e1760 wgengine/magicsock: don't call t.Fatal in magicStack.IP
It can end up executing an a new goroutine,
at which point instead of immediately stopping test execution, it hangs.
Since this is unexpected anyway, panic instead.
As a bonus, it makes call sites nicer and removes a kludge comment.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-03-30 11:48:13 -07:00
Brad Fitzpatrick
672b9fd4bd ipn{,/ipnlocal}: set new Notify.FilesWaiting when server has file(s)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 11:36:12 -07:00
Brad Fitzpatrick
0301ccd275 cmd/tailscale/cli: add debug --ipn mode
To watch the IPN message bus.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 10:43:36 -07:00
David Crawshaw
e67f1b5da0 client/tailscale, cmd/tailscale/cli: plumb --socket through
Without this, `tailscale status` ignores the --socket flag on macOS and
always talks to the IPNExtension, even if you wanted it to inspect a
userspace tailscaled.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-03-30 10:09:14 -07:00
Brad Fitzpatrick
f01091babe ipn/ipnlocal: make peerapi work in netstack mode
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 09:55:01 -07:00
Brad Fitzpatrick
4c83bbf850 wgengine: add IsNetstack func and test
So we have a documented & tested way to check whether we're in
netstack mode. To be used by future commits.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 09:53:12 -07:00
Brad Fitzpatrick
91bc723817 wgengine: add temp workaround for netstack WhoIs registration race
Updates #1616

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 09:50:54 -07:00
Brad Fitzpatrick
33bc69cf1f paths: fall back to XDG_DATA_HOME for non-root users' state dir
So peerapi has a default state directory, mostly for netstack mode
testing.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 08:21:14 -07:00
Brad Fitzpatrick
3a1eae5b6b cmd/tailscale/cli: factor out filename selection
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-29 22:19:42 -07:00
Brad Fitzpatrick
1e26d4ae19 cmd/tailscale/cli: add push subcommand
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-29 22:06:57 -07:00
Brad Fitzpatrick
eeacf84dae cmd/tailscale/cli: factor out tailscaleIPFromArg from ping command
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-29 21:29:27 -07:00
Brad Fitzpatrick
41e4e02e57 net/{packet,tstun}: send peerapi port in TSMP pongs
For discovery when an explicit hostname/IP is known. We'll still
also send it via control for finding peers by a list.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-29 15:18:23 -07:00
Brad Fitzpatrick
9659ab81e0 ipn/ipnlocal: send peerapi port(s) in Hostinfo.Services
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-29 12:51:19 -07:00
Brad Fitzpatrick
12ae2d73b3 control/controlclient: fix TS_DEBUG_MAP on requests
The concrete type being encoded changed from a value to pointer
earlier and this was never adjusted.

(People don't frequently use TS_DEBUG_MAP to see requests, so it went
unnoticed until now.)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-29 12:51:19 -07:00
David Crawshaw
f0863346c2 cmd/tailscale: add web subcommand
Used as an app frontend UI on Synology.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-03-29 12:13:19 -07:00
Brad Fitzpatrick
35596ae5ce ipn/ipnlocal: push down a user-specific root dir to peerapi handler
And add a put handler.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-29 11:33:35 -07:00
Naman Sood
662fbd4a09 wgengine/netstack: Allow userspace networking mode to expose subnets (#1588)
wgengine/netstack: Allow userspace networking mode to expose subnets

Updates #504

Updates #707

Signed-off-by: Naman Sood <mail@nsood.in>
2021-03-29 14:33:05 -04:00
Brad Fitzpatrick
a4c679e646 wgengine/monitor: on wall time jump, synthesize network change event
... to force rebinds of TCP connections

Fixes #1555
Updates tailscale/felicity#4

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-28 21:56:50 -07:00
David Anderson
07bf4eb685 wgengine: rename Fake to RespondToPing.
"Fake" doesn't mean a lot any more, given that many components
of the engine can be faked out, including in valid production
configurations like userspace-networking.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-28 21:45:02 -07:00
David Anderson
0fb738760f wgengine: make Tun optional again, default to fake.
This makes setup more explicit in prod codepaths, without
requiring a bunch of arguments or helpers for tests and
userspace mode.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-28 21:45:02 -07:00
Brad Fitzpatrick
e18c3a7d84 wgengine: optimize isLocalAddr a bit
On macOS/iOS, this removes a map lookup per outgoing packet.

Noticed it while reading code, not from profiles, but can't hurt.

BenchmarkGenLocalAddrFunc
BenchmarkGenLocalAddrFunc/map1
BenchmarkGenLocalAddrFunc/map1-4                16184868                69.78 ns/op
BenchmarkGenLocalAddrFunc/map2
BenchmarkGenLocalAddrFunc/map2-4                16878140                70.73 ns/op
BenchmarkGenLocalAddrFunc/or1
BenchmarkGenLocalAddrFunc/or1-4                 623055721                1.950 ns/op
BenchmarkGenLocalAddrFunc/or2
BenchmarkGenLocalAddrFunc/or2-4                 472493098                2.589 ns/op

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-28 21:23:25 -07:00
David Anderson
95ca86c048 go.mod: update to new wireguard-go version.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-28 19:05:55 -07:00
David Anderson
93a4aa697c wgengine: default Router to a no-op router.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-28 18:59:48 -07:00
David Anderson
440effb21a wgengine: remove Config.TUN argument. 2021-03-28 18:45:17 -07:00
Josh Bleecher Snyder
0807e3e2f7 syncs: disable TestWatchMultipleValues on Windows CI builds
The Windows CI machine experiences significant random execution delays.
For example, in this code from watchdog.go:

done := make(chan bool)
go func() {
	start := time.Now()
	mu.Lock()

There was a 500ms delay from initializing done to locking mu.

This test checks that we receive a sufficient number of events quickly enough.
In the face of random 500ms delays, unsurprisingly, the test fails.

There's not much principled we can do about it.
We could build a system of retries or attempt to detect these random delays,
but that game isn't worth the candle.

Skip the test.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-03-27 13:25:33 -07:00
Josh Bleecher Snyder
4954fbfda6 wgengine: extend TestWatchdog timeout on macOS
This works around the close syscall being slow.
We can revert this if we find a fix or if Apple makes close fast again.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-03-27 09:27:11 -07:00
David Anderson
2df8adef9d wgengine: make the tun.Device required at construction.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-27 00:33:09 -07:00
David Anderson
25e0bb0a4e net/tstun: rename wrap_windows.go to tun_windows.go.
The code has nothing to do with wrapping, it's windows-specific
driver initialization code.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-26 23:17:59 -07:00
David Anderson
22d53fe784 net/tstun: document exported function.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-26 23:17:01 -07:00
David Anderson
016de16b2e net/tstun: rename TUN to Wrapper.
The tstun packagen contains both constructors for generic tun
Devices, and a wrapper that provides additional functionality.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-26 23:15:22 -07:00
David Anderson
82ab7972f4 net/tstun: rename NewFakeTUN to NewFake.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-26 22:46:47 -07:00
David Anderson
588b70f468 net/tstun: merge in wgengine/tstun.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-26 22:31:54 -07:00
David Anderson
018200aeba net/tstun: rename from net/tun.
We depend on wireguard-go/tun, identical leaf packages can be
confusing in code.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-26 22:31:54 -07:00
David Anderson
2b4bfeda1a wgengine: pass in an explicit router.Router, rather than a generator.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-26 22:01:55 -07:00
David Anderson
9ea5cbf81f cmd/tailscaled: readd tun.Diagnose call, mistakenly lost during refactor.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-26 22:01:55 -07:00
Brad Fitzpatrick
f26dfd054a ipn/ipnlocal: rename/document peerapi stuff a bit, pass self identity
So handlers can vary based on whether owner of peer matches owner of
local node.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-26 21:36:39 -07:00
David Anderson
44d9929208 wgengine: remove Config.TUNName, require caller to create device.
Also factors out device creation and associated OS workarounds to
net/tun.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-26 21:08:11 -07:00
David Anderson
0a84aaca0a wgengine/router: remove unused wireguard *Device argument.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-26 19:43:13 -07:00
Brad Fitzpatrick
1642dfdb07 ipn/ipnlocal: get peerapi ~working in macOS/iOS NetworkExtension sandbox
IPv4 and IPv6 both work remotely, but IPv6 doesn't yet work from the
machine itself due to routing mysteries.

Untested yet on iOS, but previous prototype worked on iOS, so should
work the same.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-26 13:46:01 -07:00
Brad Fitzpatrick
bcf571ec97 wgengine/monitor: fix OpenBSD build
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-26 09:16:43 -07:00
Brad Fitzpatrick
7f174e84e6 net/interfaces: remove mutating methods, add EqualFiltered instead
Now callers (wgengine/monitor) don't need to mutate the state to remove
boring interfaces before calling State.Equal. Instead, the methods
to remove boring interfaces from the State are removed, as is
the reflect-using Equal method itself, and in their place is
a new EqualFiltered method that takes a func predicate to match
interfaces to compare.

And then the FilterInteresting predicate is added for use
with EqualFiltered to do the job that that wgengine/monitor
previously wanted.

Now wgengine/monitor can keep the full interface state around,
including the "boring" interfaces, which we'll need for peerapi on
macOS/iOS to bind to the interface index of the utunN device.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-26 09:11:48 -07:00
Brad Fitzpatrick
5a62aa8047 ipn/ipnlocal: pass down interface state to peerapi ListenConfig hook
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-26 09:11:48 -07:00
Brad Fitzpatrick
7dc88e4c1e net/interfaces: track more interface metadata in State
We have it already but threw it away. But macOS/iOS code will
be needing the interface index, so hang on to it.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-26 09:11:48 -07:00
Adrian Dewhurst
04dd6d1dae control/controlclient: sign RegisterRequest (#1549)
control/controlclient: sign RegisterRequest

Some customers wish to verify eligibility for devices to join their
tailnets using machine identity certificates. TLS client certs could
potentially fulfill this role but the initial customer for this feature
has technical requirements that prevent their use. Instead, the
certificate is loaded from the Windows local machine certificate store
and uses its RSA public key to sign the RegisterRequest message.

There is room to improve the flexibility of this feature in future and
it is currently only tested on Windows (although Darwin theoretically
works too), but this offers a reasonable starting place for now.

Updates tailscale/coral#6

Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
2021-03-26 10:01:08 -04:00
David Anderson
672731ac6f many: gofmt.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-25 17:41:51 -07:00
David Anderson
6521f02ff6 Move DNS flush logic to net/dns.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-25 17:40:52 -07:00
David Anderson
9f7f2af008 wgengine/router/dns: move to net/dns.
Preparation for merging the APIs and whatnot.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-25 16:25:30 -07:00
David Anderson
8432999835 Move wgengine/tsdns to net/dns.
Straight move+fixup, no other changes. In prep for merging with
wgengine/router/dns.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-25 16:25:30 -07:00
Brad Fitzpatrick
81143b6d9a ipn/ipnlocal: start of peerapi between nodes
Also some necessary refactoring of the ipn/ipnstate too.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-25 16:00:35 -07:00
Brad Fitzpatrick
dad10fee9c Revert "cmd/tailscaled: split package main into main shim + package"
This reverts commit b81bd8025b.

Not needed. See:

https://github.com/golang/go/wiki/Modules#how-can-i-track-tool-dependencies-for-a-module
2021-03-25 09:06:00 -07:00
Brad Fitzpatrick
82c4cb765c cmd/tailscaled: split package main into main shim + package
So we can empty import the guts of cmd/tailscaled from another
module for go mod tidy reasons.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-24 21:23:00 -07:00
Josh Bleecher Snyder
28af46fb3b wgengine: pass logger as a separate arg to device.NewDevice
Adapt to minor API changes in wireguard-go.
And factor out device.DeviceOptions variables.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-03-24 10:39:58 -07:00
Brad Fitzpatrick
b7f0e39bf2 cmd/tailscale: add "tailscale ip [-4] [-6]" command
This adds an easy and portable way for us to document how to get
your Tailscale IP address.

$ tailscale ip
100.74.70.3
fd7a:115c:a1e0:ab12:4843:cd96:624a:4603

$ tailscale ip -4
100.74.70.3

$ tailscale ip -6
fd7a:115c:a1e0:ab12:4843:cd96:624a:4603

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-24 09:54:32 -07:00
Brad Fitzpatrick
2384c112c9 net/packet, wgengine/{filter,tstun}: add TSMP ping
Fixes #1467

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-24 09:50:01 -07:00
Josh Bleecher Snyder
4b77eca2de wgengine/magicsock: check returned error in addTestEndpoint
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-03-24 09:46:36 -07:00
Josh Bleecher Snyder
79f02de55f go.sum: add entries for upstream wireguard-go
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-03-24 09:46:36 -07:00
Josh Bleecher Snyder
d31eff8473 tstest/natlab: use net.ErrClosed
We are now on 1.16.
And wgconn.NetErrClosed has been removed upstream.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-03-24 09:46:36 -07:00
Brad Fitzpatrick
c99f260e40 wgengine/magicsock: prefer IPv6 transport if roughly equivalent latency
Fixes #1566

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-23 17:34:01 -07:00
Brad Fitzpatrick
e2b3d9aa5f all: s/Magic DNS/MagicDNS/ for consistency
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-23 14:25:28 -07:00
Brad Fitzpatrick
77ec80538a syncs: add Semaphore
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-23 12:39:28 -07:00
Brad Fitzpatrick
9643d8b34d wgengine/magicsock: add an addrLatency type to combine an IPPort+time.Duration
Updates #1566 (but no behavior changes as of this change)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-23 10:09:10 -07:00
Brad Fitzpatrick
96dfeb2d7f wgengine: log tailscale pings
Fixes #1561

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-22 21:48:05 -07:00
Brad Fitzpatrick
85138d3183 health: track whether any network interface is up
Fixes #1562

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-22 21:42:14 -07:00
Brad Fitzpatrick
0994a9f7c4 wgengine{,/magicsock}: fix, improve "tailscale ping" to default routes and subnets
e.g.

$ tailscale ping 1.1.1.1
exit node found but not enabled

$ tailscale ping 10.2.200.2
node "tsbfvlan2" found, but not using its 10.2.200.0/24 route

$ sudo tailscale  up --accept-routes
$ tailscale ping 10.2.200.2
pong from tsbfvlan2 (100.124.196.94) via 10.2.200.34:41641 in 1ms

$ tailscale ping mon.ts.tailscale.com
pong from monitoring (100.88.178.64) via DERP(sfo) in 83ms
pong from monitoring (100.88.178.64) via DERP(sfo) in 21ms
pong from monitoring (100.88.178.64) via [2604:a880:4:d1::37:d001]:41641 in 22ms

This necessarily moves code up from magicsock to wgengine, so we can
look at the actual wireguard config.

Fixes #1564

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-22 21:29:44 -07:00
Brad Fitzpatrick
7e0d12e7cc wgengine/magicsock: don't update control if only endpoint order changes
Updates #1559

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-22 10:37:04 -07:00
Brad Fitzpatrick
1eb95c7e32 net/packet, wgengine{,/filter}: remove net/packet IPProto forwarding consts
Only use the ones in types/ipproto now.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-20 21:45:47 -07:00
Brad Fitzpatrick
01b90df2fa net/packet, wgengine/filter: support SCTP
Add proto to flowtrack.Tuple.

Add types/ipproto leaf package to break a cycle.

Server-side ACL work remains.

Updates #1516

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-20 21:34:13 -07:00
Brad Fitzpatrick
90a6fb7ffe tailcfg: add FilterRule.IPProto
Updates #1516

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-19 18:08:23 -07:00
Brad Fitzpatrick
32562a82a9 wgengine/magicsock: annotate a few more disco logs as verbose
Fixes #1540

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-19 13:24:29 -07:00
Brad Fitzpatrick
0406a7436a cmd/tailscale/cli: use double hypens, make default usage func more clear
Mash up some code from ffcli and std's flag package to make a default
usage func that's super explicit for those not familiar with the Go
style flags. Only show double hyphens in usage text (but still accept both),
and show default values, and only show the proper usage of boolean flags.

Fixes #1353
Fixes #1529

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-19 13:11:55 -07:00
David Anderson
8c0a0450d9 ipn/ipnlocal: allow client access to exit node's public IPs.
"public IP" is defined as an IP address configured on the exit node
itself that isn't in the list of forbidden ranges (RFC1918, CGNAT,
Tailscale).

Fixes #1522.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-19 11:54:15 -07:00
Brad Fitzpatrick
0a02aaf813 control, ipn, tailcfg: remove golang.org/x/oauth2 dep, add tailcfg.Oauth2Token
golang.org/x/oauth2 pulls in App Engine and grpc module dependencies,
screwing up builds that depend on this module.

Some background on the problem:
https://go.googlesource.com/proposal/+/master/design/36460-lazy-module-loading.md

Fixes tailscale/corp#1471

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-19 10:40:48 -07:00
Aleksandar Pesic
7b57310966 net/interfaces: use windows API to get the default route instead of parsing route print output
Fixes: #1470

Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>
2021-03-19 14:07:36 +01:00
Brad Fitzpatrick
439d70dce2 cmd/tailscale, ipn/localapi: get daemon version from localapi status
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-18 21:14:10 -07:00
Brad Fitzpatrick
d0dffe33c0 cmd/tailscale, ipn/localapi: use localapi for status, not IPN acrobatics
Yay simpler code.

Tested on Linux, macOS and Windows.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-18 19:51:02 -07:00
Brad Fitzpatrick
0c3e9722cc cmd/tailscale/cli: fix typo in comment
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-18 15:43:04 -07:00
Christine Dodrill
a480b1baa5 logpolicy: set log target on windows based on a registry key (#1542)
Signed-off-by: Christine Dodrill <xe@tailscale.com>
2021-03-18 13:23:56 -04:00
Brad Fitzpatrick
c19ed37b0f wgengine/magicsock: mark some legacy debug log output as verbose
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-18 08:17:59 -07:00
Brad Fitzpatrick
cc508be603 control/controlclient: remove redundant Hostinfo log
The direct client already logs it in JSON form. Then it's immediately
logged again in an unformatted dump, so this removes that unformatted
one.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-18 08:16:33 -07:00
Brad Fitzpatrick
aa79a57f63 wgengine/netstack: use inet.af/netstack, remove 64-bit only limitation
This reverts the revert commit 84aba349d9.

And changes us to use inet.af/netstack.

Updates #1518

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-17 22:46:09 -07:00
Brad Fitzpatrick
a217078f67 go.mod: update golang.org/x/oauth2
go.sum gets a bit wild, but tolerable.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-17 22:46:09 -07:00
Brad Fitzpatrick
ec1b31ea83 go.mod: update golang.org/x/{crypto,sync,sys,term,time}
These ones don't have large dependency trees.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-17 22:46:09 -07:00
Brad Fitzpatrick
a4fa2c5611 go.mod, go.sum: go mod tidy
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-17 19:54:01 -07:00
David Anderson
6fb5d4080c net/portmapper: silently handle PCP NOT_AUTHORIZED responses.
Fixes #1525.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-17 19:44:35 -07:00
Brad Fitzpatrick
4145bb7148 tailcfg: bump CurrentMapRequestVersion, forgotten earlier
In f45a9e291b (2021-03-04), I tried to bump CurrentMapRequestVersion
to 12 but only documented the meaning of 12 but forgot to actually
increase it from 11.

Mapver 11 was added in ea49b1e811 (2021-03-03).

Fix this in its own commit so we can cherry-pick it to the 1.6 release
branch.
2021-03-17 14:12:35 -07:00
David Anderson
4543e4202f VERSION.txt: this is 1.7.0. 2021-03-16 19:04:55 -07:00
David Anderson
6f48a8422a version: remove version-info.sh when cleaning. 2021-03-16 16:38:19 -07:00
David Anderson
84aba349d9 Revert "wgengine/netstack: update gvisor to remove 64-bit only limitation"
Breaks our corp repo due to gRPC dependency hell.

This reverts commit d42f8b7f9a.
2021-03-16 15:36:06 -07:00
Brad Fitzpatrick
e0f2796b43 wgengine: don't diagnose iOS NWPathMonitor connection probe timeouts
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-16 14:13:02 -07:00
Brad Fitzpatrick
0f90586da8 wgengine/monitor: skip more route messages on darwin
Should help iOS battery life on NEProvider.wake/skip events
with useless route updates that shouldn't cause re-STUNs.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-16 12:59:26 -07:00
Brad Fitzpatrick
d5fd373f09 net/interfaces: skip IPv6 link-local interfaces like we do for IPv4
We strip them control-side anyway, and we already strip IPv4 link
local, so there's no point uploading them.  And iOS has a ton of them,
which results in somewhat silly amount of traffic in the MapRequest.

We'll be doing same-LAN-inter-tailscaled link-local traffic a
different way, with same-LAN discovery.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-16 12:52:34 -07:00
Brad Fitzpatrick
469613b4c5 version: bump date
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-16 12:36:01 -07:00
Brad Fitzpatrick
27c4dd9a97 Revert "cmd/tailscaled, ipn/{ipnlocal,ipnserver}: let netstack get access to LocalBackend"
This reverts commit 2bc518dcb2.

@namansood didn't end up needing it in his 770aa71ffb.
2021-03-16 12:33:13 -07:00
Brad Fitzpatrick
9eb65601ef health, ipn/ipnlocal: track, log overall health
Updates #1505

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-16 09:12:39 -07:00
Brad Fitzpatrick
6fbc9b3a98 control/controlclient: cache Windows version
To atone for 1d7f9d5b4a, the revert of 4224b3f731.

At least it's fast again, even if it's shelling out to cmd.exe (once now).

Updates #1478

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-15 21:40:32 -07:00
Brad Fitzpatrick
1d7f9d5b4a Revert "control/controlclient: use API to get Windows version number"
This reverts commit 4224b3f731.

From https://github.com/tailscale/tailscale/pull/1494#discussion_r594852889 ...

> Actually, I want all four numbers back. I spent the evening
> debugging an issue for a user running an old version of Windows
> and then going to to
> https://en.wikipedia.org/wiki/Windows_10_version_history_(version_1809)
> and reading all the revision notes in the footnotes of that wikipedia
> page.
>
> I'm going to revert this for now for Tailscale 1.6. We can land it
> again later when we figure out how to get the fourth numbers.

Updates #1478
2021-03-15 21:28:48 -07:00
Brad Fitzpatrick
d42f8b7f9a wgengine/netstack: update gvisor to remove 64-bit only limitation
gVisor fixed their google/gvisor#1446 so we can include gVisor mode
on 32-bit machines.

A few minor upstream API changes, as normal.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-15 21:02:51 -07:00
Brad Fitzpatrick
98ab533324 cmd/tailscale/cli: include GOOS in BSD warning message
instead of just lowercase "bsd"

Updates #1475

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-15 21:02:16 -07:00
David Anderson
380a3526f6 cmd/tailscale/cli: warn if using subnet routing on BSD
Fixes #1475.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-15 17:25:59 -07:00
Brad Fitzpatrick
232cfda280 wgengine/router: report to control when setPrivateNetwork fails
Fixes #1503

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-15 16:19:40 -07:00
Brad Fitzpatrick
ba8c6d0775 health, controlclient, ipn, magicsock: tell health package state of things
Not yet checking anything. Just plumbing states into the health package.

Updates #1505

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-15 15:20:55 -07:00
Naman Sood
770aa71ffb client, cmd/hello, ipn, wgengine: fix whois for netstack-forwarded connections
Updates #504

Updates #707

Signed-off-by: Naman Sood <mail@nsood.in>
2021-03-15 18:14:09 -04:00
Brad Fitzpatrick
44ab0acbdb net/portmapper, wgengine/monitor: cache gateway IP info until link changes
Cuts down allocs & CPU in steady state (on regular STUN probes) when network
is unchanging.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-15 14:27:39 -07:00
Brad Fitzpatrick
d580b3f09e wgengine/router: fix go vet failure on BSDs
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-15 14:27:39 -07:00
Brad Fitzpatrick
974be2ec5c net/interfaces: rewrite the darwin likelyHomeRouterIP from C to Go
We basically already had the RIB-parsing Go code for this in both
net/interfaces and wgengine/monitor, for other reasons.

Fixes #1426
Fixes #1471

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-15 13:27:36 -07:00
Christine Dodrill
deff20edc6 cmd/tailscale/cli: don't permit setting self IP as exit node (#1491)
This change makes it impossible to set your own IP address as the exit node for this system.

Fixes #1489

Signed-off-by: Christine Dodrill <xe@tailscale.com>
2021-03-15 15:44:56 -04:00
Brad Fitzpatrick
ab2a8a7493 derp: return keep-alive message up to callers
To be used by health checking, which wants to see activity, even if idle.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-15 10:43:48 -07:00
Aleksandar Pesic
4224b3f731 control/controlclient: use API to get Windows version number
Fixes #1478

Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>
2021-03-15 10:06:42 -07:00
Brad Fitzpatrick
2bc518dcb2 cmd/tailscaled, ipn/{ipnlocal,ipnserver}: let netstack get access to LocalBackend
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-15 09:31:25 -07:00
Aleksandar Pesic
25d2dd868b wgengine/router: flushdns in windows when router config changes
Fixes: https://github.com/tailscale/tailscale/issues/1430

Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>
2021-03-15 13:03:01 +01:00
Brad Fitzpatrick
d491adbf09 cmd/tailscaled: on Synology, fall back to netstack if needed
Updates tailscale/tailscale-synology#35

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-12 15:04:13 -08:00
Brad Fitzpatrick
c6358f2247 net/netcheck: add a few more STUN retries for prior DERP home
For #1310, maybe.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-12 11:46:08 -08:00
Brad Fitzpatrick
0a84359d2d tailcfg, net/netcheck: let control mark "Avoid" bit on DERP regions
So a region can be used if needed, but won't be STUN-probed or used as
its home.

This gives us another possible debugging mechanism for #1310, or can
be used as a short-term measure against DERP flip-flops for people
equidistant between regions if our hysteresis still isn't good enough.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-12 10:43:24 -08:00
Brad Fitzpatrick
c81814e4f8 derp{,/derphttp},magicsock: tell DERP server when ping acks can be expected
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-12 09:55:02 -08:00
Brad Fitzpatrick
f9f3b67f3a wgengine{,tsdns}: rebind MagicDNS forwarders on link change
Fixes #1480

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-12 08:56:53 -08:00
David Crawshaw
bdb91a20eb ipnstate, ipnlocal: add AuthURL to status
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-03-12 08:07:20 -08:00
David Anderson
1bc3c03562 control/controlclient: allow for an unset linkMon.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-11 21:21:15 -08:00
David Anderson
fa6110e47b wgengine/router: don't touch interface routes
Developed by a cast of dozens.

Fixes #1448

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-11 21:09:25 -08:00
Brad Fitzpatrick
c576fea60e wgengine/magicsock: delete unused WhoIs method that was moved elsewhere
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-11 11:44:01 -08:00
David Anderson
0b66cfe1e0 control/controlclient: report broken IP forwarding more precisely.
IP forwarding is not required when advertising a machine's local IPs
over Tailscale.

Fixes #1435.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-11 10:49:57 -08:00
Brad Fitzpatrick
0430c2dd12 wgengine/tsdns: truncate Map.PrettyDiffFrom string at 1KB
Hello's were painful.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-10 07:31:11 -08:00
Brad Fitzpatrick
cc99059fc2 Revert "--advertise-routes option enabled in Mac tailscale CLI; it checks for IP forwarding enabled"
This reverts commit 08949d4ef1.

I think this code was aspirational. There's no code that sets up the
appropriate NAT code using pfctl/etc. See #911 and #1475.

Updates #1475
Updates #911
2021-03-09 19:30:26 -08:00
David Anderson
bf0740b011 Merge branch 'main' of github.com:tailscale/tailscale into danderson/filter-privacy 2021-03-09 16:33:55 -08:00
David Anderson
a7f12a110a wgengine/filter: only log packets to/from non-default routes.
Fixes tailscale/corp#1429.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-09 16:28:43 -08:00
David Anderson
d79a2f3809 wgengine/filter: only log packets to/from non-default routes.
Fixes tailscale/corp#1429.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-09 16:24:09 -08:00
Brad Fitzpatrick
ef7bac2895 tailcfg, net/portmapper, wgengine/magicsock: add NetInfo.HavePortMap
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-09 15:17:24 -08:00
Brad Fitzpatrick
79d8288f0a wgengine/magicsock, derp, derp/derphttp: respond to DERP server->client pings
No server support yet, but we want Tailscale 1.6 clients to be able to respond
to them when the server can do it.

Updates #1310

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-09 13:56:13 -08:00
Brad Fitzpatrick
66480755c2 cmd/tailscale/cli: document how to see subcommand usage
From user feedback.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-09 12:52:25 -08:00
Brad Fitzpatrick
387e83c8fe wgengine/magicsock: fix Conn.Rebind race that let ErrClosed errors be read
There was a logical race where Conn.Rebind could acquire the
RebindingUDPConn mutex, close the connection, fail to rebind, release
the mutex, and then because the mutex was no longer held, ReceiveIPv4
wouldn't retry reads that failed with net.ErrClosed, letting that
error back to wireguard-go, which would then stop running that receive
IP goroutine.

Instead, keep the RebindingUDPConn mutex held for the entirety of the
replacement in all cases.

Updates tailscale/corp#1289

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-08 21:08:35 -08:00
Brad Fitzpatrick
fee74e7ea7 net/interfaces, wgengine/monitor: fix false positives link changes
interfaces.State.String tries to print a concise summary of the
network state, removing any interfaces that don't have any or any
interesting IP addresses. On macOS and iOS, for instance, there are a
ton of misc things.

But the link monitor based its are-there-changes decision on
interfaces.State.Equal, which just used reflect.DeepEqual, including
comparing all the boring interfaces. On macOS, when turning wifi on or off, there
are a ton of misc boring interface changes, resulting in hitting an earlier
check I'd added on suspicion this was happening:

    [unexpected] network state changed, but stringification didn't

This fixes that by instead adding a new
interfaces.State.RemoveUninterestingInterfacesAndAddresses method that
does, uh, that. Then use that in the monitor. So then when Equal is
used later, it's DeepEqualing the already-cleaned version with only
interesting interfaces.

This makes cmd/tailscaled debug --monitor much less noisy.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-08 20:46:39 -08:00
Brad Fitzpatrick
d3e56aa979 cmd/tailscaled: fix monitor debug tool's output
Logic was backwards, introduced in earlier monitor refactoring last
week in e3df29d488.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-08 20:34:18 -08:00
Denton Gentry
04e72f95cc wgengine/router: add OpenBSD IPv6 support.
Similar to FreeBSD in https://github.com/tailscale/tailscale/issues/1307,
add IPv6 addresses with a prefix length of 48.

Fixes https://github.com/tailscale/tailscale/issues/1372

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-03-08 19:02:59 -08:00
Brad Fitzpatrick
c445e3d327 wgengine/magicsock: fix typo in comment 2021-03-08 15:27:11 -08:00
Aleksandar Pesic
258d0e8d9a wgengine/monitor: simplify the Windows monitor to make it more reliable
Updates tailscale/tailscale#1414

Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>
2021-03-08 14:54:57 -08:00
Naman Sood
4c80344e27 wgengine/netstack: stop UDP forwarding when one side dies
Updates #504

Updates #707

Signed-off-by: Naman Sood <mail@nsood.in>
2021-03-08 13:59:37 -05:00
Naman Sood
7325b5a7ba wgengine/netstack: add support for incoming UDP connections
Updates #504

Updates #707

Signed-off-by: Naman Sood <mail@nsood.in>
2021-03-08 13:27:27 -05:00
Brad Fitzpatrick
43b30e463c ipn/ipnserver: refactor permissions checks a bit, document more, fix Windows
Windows was only running the localapi on the debug port which was a
stopgap at the time while doing peercreds work. Removed that, and
wired it up correctly, with some more docs.

More clean-up to do after 1.6, moving the localhost TCP auth code into
the peercreds package. But that's too much for now, so the docs will
have to suffice, even if it's at a bit of an awkward stage with the
newly-renamed "NotWindows" field, which still isn't named well, but
it's better than its old name of "Unknown" which hasn't been accurate
since unix sock peercreds work anyway.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-05 21:46:32 -08:00
Denton Gentry
bcea88da46 wgengine: support FreeBSD with IPv6.
Fixes https://github.com/tailscale/tailscale/issues/1307 for keepsies.

We cannot set the tun interface address as a /128 on FreeBSD,
due to https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=218508
Instead we set the interface address as a /48, which is enabled
by commit 82edf94df7.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-03-05 19:34:14 -08:00
Denton Gentry
c8af6bc009 Revert "freebsd: ignore IPv6 for now"
This reverts commit 061422affc.

We have a way to support IPv6 on FreeBSD now.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-03-05 19:34:14 -08:00
Brad Fitzpatrick
f45a9e291b tailcfg, control/controlclient: add MapResponse.PingRequest
So the control server can test whether a client's actually present.

Most clients are over HTTP/2, so these pings (to the same host) are
super cheap.

This mimics the earlier goroutine dump mechanism.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-05 16:28:56 -08:00
Brad Fitzpatrick
e453c7ca57 safesocket: use right version of gofmt
sigh

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-05 13:44:14 -08:00
Brad Fitzpatrick
f11cb811cc safesocket: support finding tailscale port/auth token from sandboxed CLI
Previously the CLI could only find the HTTP auth token when running
the CLI outside the sandbox, not like
/Applications/Tailscale.app/Contents/MacOS/Tailscale when that was
from the App Store.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-05 13:33:30 -08:00
Brad Fitzpatrick
bc159dc689 cmd/tailscale: fix depaware.txt
git fail.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-05 13:32:00 -08:00
Brad Fitzpatrick
c136f48b79 cmd/tailscale/cli: restore hidden debug subcommand
The debub subcommand was moved in
6254efb9ef because the monitor brought
in tons of dependencies to the cmd/tailscale binary, but there wasn't
any need to remove the whole subcommand itself.

Add it back, with a tool to dump the local daemon's goroutines.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-05 12:14:24 -08:00
Brad Fitzpatrick
a4b585947d ipn/localapi, client/tailscale: add a goroutine dump handler
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-05 12:14:24 -08:00
Brad Fitzpatrick
1ca3e739f7 ipn/ipnserver: set PermitWrite on localapi handler
The TODO was easy now with peerCreds and the isReadonlyConn func.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-05 12:14:24 -08:00
Steve Coffman
0d0fad43ed build_docker.sh, Dockerfile: fix bug with shell quoting
Fixes #1449

Signed-off-by: Steve Coffman <steve@khanacademy.org>
2021-03-05 10:38:32 -08:00
Brad Fitzpatrick
602f92ec30 wgengine/monitor: log warning if state changes but stringification doesn't
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-05 10:19:29 -08:00
Brad Fitzpatrick
b14ea68754 net/interfaces: log why when we failed to look up gateway on macOS
Not beautiful, but I'm debugging connectivity problems on
NEProvider.sleep+wake and need more clues.

Updates #1426
Updates tailscale/corp#1289

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-05 09:44:55 -08:00
Brad Fitzpatrick
affd859121 ipn/ipnlocal, control/controlclient: propagate link monitor to controlclient
Don't use it yet, but get it down there.

Updates #1455

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-04 20:11:55 -08:00
Brad Fitzpatrick
d37b3b02cd net/dnsfallback: fix infinite loop and limit number of candidates
Updates #1455 (fixes the DNS spin part, but other things aren't ideal there)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-04 19:19:40 -08:00
David Anderson
63a9adeb6c portlist: collect IPv6 listening sockets on linux.
This is important because some of those v6 sockets are actually
dual-stacked sockets, so this is our only chance of discovering
some services.

Fixes #1443.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-04 13:52:56 -08:00
Brad Fitzpatrick
82edf94df7 ipn/ipnlocal: make IPv6 OS routes be a single /48 for our ULA space
And if we have over 10,000 CGNAT routes, just route the entire
CGNAT range. (for the hello test server)

Fixes #1450

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-04 13:37:05 -08:00
Brad Fitzpatrick
a6d098c750 wgengine/magicsock: log when DERP connection succeeds
Updates #1310
2021-03-04 09:30:00 -08:00
Brad Fitzpatrick
829eb8363a net/interfaces: sort returned addresses from LocalAddresses
Also change the type to netaddr.IP while here, because it made sorting
easier.

Updates tailscale/corp#1397

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-04 07:04:39 -08:00
David Anderson
ad6edf5ecd portlist: report a better process name for .Net on linux.
Fixes #1440.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-03 22:30:27 -08:00
Brad Fitzpatrick
ffa70a617d wgengine{,/monitor}: restore Engine.LinkChange, add Mon.InjectEvent
The Engine.LinkChange method was recently removed in
e3df29d488 while misremembering how
Android's link state mechanism worked.

Rather than do some last minute rearchitecting of link state on
Android before Tailscale 1.6, restore the old Engine.LinkChange hook
for now so the Android client doesn't need any changes. But change how
it's implemented to instead inject an event into the link monitor.

Fixes #1427

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-03 22:09:02 -08:00
Brad Fitzpatrick
10f48087f4 net/tshttpproxy: call winhttp calls from a fixed OS thread
We often see things in logs like:

2021-03-02 17:52:45.2456258 +0800 +0800: winhttp: Open: The parameter is incorrect.
2021-03-02 17:52:45.2506261 +0800 +0800: tshttpproxy: winhttp: GetProxyForURL("https://log.tailscale.io/c/tailnode.log.tailscale.io/5037bb42f4bc330e2d6143e191a7ff7e837c6be538139231de69a439536e0d68"): ERROR_INVALID_PARAMETER [unexpected]

I have a hunch that WinHTTP has thread-local state. If so, this would fix it.
If not, this is pretty harmless.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-03 19:16:04 -08:00
Denton Gentry
061422affc freebsd: ignore IPv6 for now
FreeBSD tun devices don't work with the way we implement IPv6
https://github.com/tailscale/tailscale/issues/1307

At least for now, remove any IPv6 addresses from the netmap.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-03-03 15:33:13 -08:00
Denton Gentry
524fb2c190 safesocket: add FreeBSD to PlatformUsesPeerCreds
FreeBSD is supported by peercred now.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-03-03 15:33:13 -08:00
Denton Gentry
6756f20632 go.mod: update peercred
Adds FreeBSD support.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-03-03 15:33:13 -08:00
David Anderson
2e347d1e10 tailcfg: tweak documentation for map version 11
version: bump date.
2021-03-03 15:06:35 -08:00
David Anderson
ea49b1e811 tailcfg: bump map request version for v6 + default routes.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-03 12:01:15 -08:00
David Anderson
1cb0ffc3ff wgengine/router: make windows gracefully handle disabled IPv4 or IPv6.
This is necessary because either protocol can be disabled globally by a
Windows registry policy, at which point trying to touch that address
family results in "Element not found" errors. This change skips programming
address families that Windows tell us are unavailable.

Fixes #1396.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-03 11:48:17 -08:00
Brad Fitzpatrick
92cdb30b26 tailcfg, control/controlclient: add goroutine dump debug feature
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-03 10:56:01 -08:00
Brad Fitzpatrick
f858b0d25f wgengine/netstack: remove some v2 logging by default
Even with [v2], it still logtails and takes time to format.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-03 10:37:06 -08:00
Naman Sood
d01c60dad5 wgengine/netstack: use system dialer to contact servers on localhost
Updates #504

Updates #707

Signed-off-by: Naman Sood <mail@nsood.in>
2021-03-03 13:27:50 -05:00
Brad Fitzpatrick
7461dded88 wgengine/monitor: on unsupported platforms, use a polling implementation
Not great, but lets people working on new ports get going more quickly
without having to do everything up front.

As the link monitor is getting used more, I felt bad having a useless
implementation.

Updates #815
Updates #1427

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-02 21:49:27 -08:00
Brad Fitzpatrick
8a55d463c8 net/interfaces: merge darwin files for DefaultRouteInterface in sandbox
DefaultRouteInterface was previously guarded by build tags such that
it was only accessible to tailscaled-on-macos, but there was no reason
for that. It runs fine in the sandbox and gives better default info,
so merge its file into interfaces_darwin.go.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-02 21:15:25 -08:00
David Anderson
8d77dfdacb wgengine/router: add a dummy IPv6 address if needed for default routing.
Fixes #1339

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-02 19:32:04 -08:00
Brad Fitzpatrick
b4cf837d8a logtail: use link monitor to determine when to retry after upload failure
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-02 16:30:57 -08:00
Brad Fitzpatrick
c3e5903b91 wgengine/magicsock: remove leftover portmapper debug logging
It's already logged at the right time in logEndpointChange.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-02 12:42:45 -08:00
Brad Fitzpatrick
15b6969a95 ipn/ipnserver: grant client r/w access if peer uid matches tailscaled
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-02 12:34:11 -08:00
Brad Fitzpatrick
63ed4dd6c9 net/portmapper: fix typo
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-02 12:26:54 -08:00
Naman Sood
95c03d1ead wgengine/netstack: forward incoming connections to localhost
Updates #707
Updates #504

Signed-off-by: Naman Sood <mail@nsood.in>
2021-03-02 15:26:40 -05:00
Brad Fitzpatrick
471f0c470a wgengine/monitor: skip some macOS route updates, fix debounce regression
Debound was broken way back in 5c1e443d34 and we never noticed.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-02 11:51:38 -08:00
Brad Fitzpatrick
be779b3587 safesocket, ipn/ipnserver: unify peercred info, fix bug on FreeBSD etc
FreeBSD wasn't able to run "tailscale up" since the recent peercred
refactoring.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-02 11:23:26 -08:00
Brad Fitzpatrick
f304a45481 wgengine/monitor: add skipped failing test for Darwin route message bug
Updates #1416

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-02 09:53:36 -08:00
Brad Fitzpatrick
0d0ec7853c cmd/tailscaled: don't require root on darwin with --tun=userspace-networking
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-02 08:36:25 -08:00
Brad Fitzpatrick
31721759f3 wgengine/monitor: don't return nil, nil in darwin monitor
We used to allow that, but now it just crashes.

Separately I need to figure out why it got into this path at all,
which is #1416.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-02 08:31:33 -08:00
Christine Dodrill
b89c757817 wgengine/tsdns: explicitly reject .onion lookups
Tor has a location-hidden service feature that enables users to host services
from inside the Tor network. Each of these gets a unique DNS name that ends with
.onion. As it stands now, if a misbehaving application somehow manages to make
a .onion DNS request to our DNS server, we will forward that to the DNS server,
which could leak that to malicious third parties. See the recent bug Brave had
with this[1] for more context.

RFC 7686 suggests that name resolution APIs and libraries MUST respond with
NXDOMAIN unless they can actually handle Tor lookups. We can't handle .onion
lookups, so we reject them.

[1]: https://twitter.com/albinowax/status/1362737949872431108

Fixes tailscale/corp#1351

Signed-off-by: Christine Dodrill <xe@tailscale.com>
2021-03-01 22:17:49 -08:00
Brad Fitzpatrick
c0cdca6d06 cmd/tailscaled, logtail: share link monitor from wgengine to logtail
Part of overall effort to clean up, unify, use link monitoring more,
and make Tailscale quieter when all networks are down. This is especially
bad on macOS where we can get killed for not being polite it seems.
(But we should be polite in any case)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 22:09:43 -08:00
Brad Fitzpatrick
24fa616e73 wgengine/monitor: make Darwin monitor shut down cleanly, add test
Don't use os.NewFile or (*os.File).Close on the AF_ROUTE socket. It
apparently does weird things to the fd and at least doesn't seem to
close it. Just use the unix package.

The test doesn't actually fail reliably before the fix, though. It
was an attempt. But this fixes the integration tests.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 21:34:41 -08:00
Brad Fitzpatrick
625c413508 ipn/ipnlocal: fix another regression from link monitoring refactor
Prior to e3df29d488, the Engine.SetLinkChangeCallback fired
immediately, even if there was no change. The ipnlocal code apparently
depended on that, and it broke integration tests (which live in
another repo). So mimic the old behavior and call the ipnlocal
callback immediately at init.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 20:45:30 -08:00
Brad Fitzpatrick
487c520109 wgengine: fix bug from earlier commit
Commit e3df29d488 introduced this bug where the
interfaces-were-changed-or-not bit got lost.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 20:22:12 -08:00
David Anderson
793cb131f0 wgengine/router: toggle killswitch when using default routes on windows.
Fixes #1398.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-01 19:37:22 -08:00
David Anderson
ac3de93d5c tempfork/wireguard-windows/firewall: add.
This is a fork of wireguard-windows's firewall package, with
the firewall rules adjusted to better line up with tailscale's
needs.

The package was taken from commit 3cc76ed5f222ec82748ef3bd8c41d4b059e28cdb
in our fork of wireguard-go.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-01 19:37:22 -08:00
Brad Fitzpatrick
30a37622b4 cmd/hello: break out local HTTP client into client/tailscale
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 19:11:31 -08:00
David Anderson
f647e3daaf ipn/ipnlocal: transform default routes into "all but LAN" routes.
Fixes #1177.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-01 18:47:43 -08:00
Brad Fitzpatrick
b46e337cdc cmd/hello: use go:embed for the template
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 18:47:28 -08:00
Brad Fitzpatrick
9df4185c94 control/controlclient, net/{dnscache,dnsfallback}: add DNS fallback mechanism
Updates #1405
Updates #1403

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 18:42:03 -08:00
Brad Fitzpatrick
03c344333e cmd/tailscale: remove Windows console fixing
Not needed, as we don't build this as a GUI app ever.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 15:31:20 -08:00
Brad Fitzpatrick
e3df29d488 wgengine{,/monitor}: move interface state fetching/comparing to monitor
Gets it out of wgengine so the Engine isn't responsible for being a
callback registration hub for it.

This also removes the Engine.LinkChange method, as it's no longer
necessary.  The monitor tells us about changes; it doesn't seem to
need any help. (Currently it was only used by Swift, but as of
14dc790137 we just do the same from Go)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 13:01:08 -08:00
Brad Fitzpatrick
a038e8690c wgengine/netstack: fix 32-bit build broken from prior commit
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 11:19:31 -08:00
Brad Fitzpatrick
38dc6fe758 cmd/tailscaled, wgengine: remove --fake, replace with netstack
And add a --socks5-server flag.

And fix a race in SOCKS5 replies where the response header was written
concurrently with the copy from the backend.

Co-authored with Naman Sood.

Updates #707
Updates #504

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 11:09:19 -08:00
Brad Fitzpatrick
d74cddcc56 wgengine/netstack: add Magic DNS + DNS resolution to SOCKS5 dialing
Updates #707
Updates #504

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 09:10:05 -08:00
Brad Fitzpatrick
34188d93d4 wgengine/monitor: start moving interface state accessor into monitor
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-01 07:56:06 -08:00
Brad Fitzpatrick
14dc790137 wgengine/monitor: make the darwin link monitor work in the sandbox too
Previously tailscaled on macOS was running "/sbin/route monitor" as a
child process, but child processes aren't allowed in the Network
Extension / App Store sandbox. Instead, just do what "/sbin/route monitor"
itself does: unix.Socket(unix.AF_ROUTE, unix.SOCK_RAW, 0) and read that.

We also parse it now, but don't do anything with the parsed results yet.

We will over time, as we have with Linux netlink messages over time.

Currently any message is considered a signal to poll and see what changed.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-28 21:14:51 -08:00
Brad Fitzpatrick
a55a03d5ff wgengine: let LinkMonitor be passed in to NewUserspaceEngine
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-27 21:55:06 -08:00
Brad Fitzpatrick
ee6475a44d wgengine: unify NewUserspaceEngine, NewUserspaceEngineAdvanced
Also rename EngineConfig to Config to avoid wgengine.EngineConfig
stutter.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-27 21:52:24 -08:00
Brad Fitzpatrick
dda03a911e wgengine/monitor: change API to permit multiple independent callbakcks
Currently it assumes exactly 1 registered callback. This changes it to
support 0, 1, or more than 1.

This is a step towards plumbing wgengine/monitor into more places (and
moving some of wgengine's interface state fetching into monitor in a
later step)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-27 19:36:52 -08:00
Brad Fitzpatrick
0eea490724 wgengine: also close link monitor on NewUserspaceEngineAdvanced error
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-27 19:11:23 -08:00
Matt Layher
719de8f0e1 util/systemd: explicitly check for os.ErrNotExist from sdnotify
Signed-off-by: Matt Layher <mdlayher@gmail.com>
2021-02-27 19:03:16 -08:00
Brad Fitzpatrick
2d5db90161 util/winutil: make it actually compile
Helps to use the right GOOS after refactoring, sigh.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-26 20:52:23 -08:00
Brad Fitzpatrick
e98cdbb8b6 util/winutil: add little Windows utility package
Code from Alex Brainman, split out of another change. I changed it to
a comma-ok return and tweaked the docs a bit.
2021-02-26 20:42:00 -08:00
Naman Sood
fec9dcbda1 wgengine/netstack: start SOCKS5 server in netstack mode
Updates #707
Updates #504

Signed-off-by: Naman Sood <mail@nsood.in>
2021-02-26 13:44:49 -08:00
Naman Sood
fe16ef6812 net/socks5: create SOCKS5 package for proxy server in userspace networking
Updates #707
Updates #504

Signed-off-by: Naman Sood <mail@nsood.in>
2021-02-26 13:44:49 -08:00
Brad Fitzpatrick
f68431fc02 cmd/derper: add /bootstrap-dns handler
For option (d) of #1405.

For an HTTPS request of /bootstrap-dns, this returns e.g.:

{
  "log.tailscale.io": [
    "2600:1f14:436:d603:342:4c0d:2df9:191b",
    "34.210.105.16"
  ],
  "login.tailscale.com": [
    "2a05:d014:386:203:f8b4:1d5a:f163:e187",
    "3.121.18.47"
  ]
}

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-26 09:29:28 -08:00
Brad Fitzpatrick
c1ae1a3d2d version: bump date
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-26 08:14:35 -08:00
Brad Fitzpatrick
99d67493be cmd/derper: update a link from godoc.org to pkg.go.dev
Save a redirect.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-26 08:14:15 -08:00
Brad Fitzpatrick
000b80de9d net/interfaces: go idle on macOS when wifi/etc is down, ignore utun* interfaces
Updates tailscale/corp#1289
Updates tailscale/corp#1367
Updates tailscale/corp#1378
Updates tailscale/felicity#4
2021-02-25 15:47:29 -08:00
Brad Fitzpatrick
3fd00c4a40 cmd/tailscaled: create /usr/local/bin on macOS install-system-daemon if needed
Fixes #1400

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-25 12:01:17 -08:00
Naman Sood
517c90d7e5 wgengine, cmd/tailscaled: refactor netstack, forward TCP to hello as demo (#1301)
Updates #707
Updates #504

Signed-off-by: Naman Sood <mail@nsood.in>
2021-02-25 14:18:16 -05:00
Aleksandar Pesic
daf6de4f14 wgengine: make NewUserspaceEngine wait for TUN interface to be up on Windows
Updates #474

Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>
2021-02-25 07:58:17 -08:00
Brad Fitzpatrick
ea3715e3ce wgengine/magicsock: remove TODO about endpoints-over-DERP
It was done in Tailscale 1.4 with CallMeMaybe disco messages
containing endpoints.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-24 21:34:31 -08:00
David Anderson
360095cd34 ipn: add tests for exit node pretty printing.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-24 21:18:35 -08:00
David Anderson
8ee1cb6156 ipn/ipnlocal: mark findExitNodeID as requiring mutex.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-24 21:18:33 -08:00
David Anderson
54d7070121 wgengine/router: correctly read IPv6 routes when diffing.
Fixes #1185.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-24 20:41:56 -08:00
David Anderson
abfd73f569 ipn: print currently selected exit route in Prefs.String().
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-24 20:41:56 -08:00
David Anderson
2404c0ffad ipn/ipnlocal: only filter out default routes when computing the local wg config.
UIs need to see the full unedited netmap in order to know what exit nodes they
can offer to the user.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-24 20:41:56 -08:00
David Anderson
ebf3f2fd9f cmd/tailscale/cli: add CLI option to offer an exit node to the tailnet.
Finishes up linux part of #1154.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-24 11:34:06 -08:00
Brad Fitzpatrick
e9e4f1063d wgengine/magicsock: fix discoEndpoint caching bug when a node key changes
Fixes #1391

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-23 14:39:15 -08:00
Brad Fitzpatrick
f11952ad7f ipn/ipnserver: fix Windows connection auth regression
Regression from code movement in d3efe8caf6

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-23 13:27:04 -08:00
Brad Fitzpatrick
c64bd587ae net/portmapper: add NAT-PMP client, move port mapping service probing
* move probing out of netcheck into new net/portmapper package
* use PCP ANNOUNCE op codes for PCP discovery, rather than causing
  short-lived (sub-second) side effects with a 1-second-expiring map +
  delete.
* track when we heard things from the router so we can be less wasteful
  in querying the router's port mapping services in the future
* use portmapper from magicsock to map a public port

Fixes #1298
Fixes #1080
Fixes #1001
Updates #864

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-23 09:07:38 -08:00
David Anderson
d038a5295d wgengine/wglog: drop 1/s "interface is up" messages.
Fixes #1388.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-23 09:01:58 -08:00
Brad Fitzpatrick
188bb14269 wgengine: consistently close things when NewUserspaceEngineAdvanced errors
Fixes #1363

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-22 20:39:39 -08:00
David Anderson
6e42430ad8 wgengine/monitor: don't log any single-IP routes added to the tailscale table.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-22 20:21:51 -08:00
David Anderson
df5adb2e23 wgengine/monitor: on linux, also monitor for IPv6 changes.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-22 19:38:07 -08:00
David Anderson
b83c273737 wgengine/filter: use IPSet for localNets instead of prefixes.
Part of #1177, preparing for doing fancier set operations on
the allowed local nets.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-22 14:51:22 -08:00
Matt Layher
2c500cee23 go.mod: bump github.com/mdlayher/netlink, github.com/jsimonetti/rtnetlink
Signed-off-by: Matt Layher <mdlayher@gmail.com>
2021-02-22 06:20:56 -08:00
Filippo Valsorda
39f7a61e9c tstest/staticcheck: import the main package to fix "go mod tidy"
Importing the non-main package was missing some dependencies that
"go mod tidy" would then cleanup. Also added a non-ignore build tag to
avoid other tools getting upset about importing a main package.

Signed-off-by: Filippo Valsorda <hi@filippo.io>
2021-02-20 09:53:47 -08:00
Filippo Valsorda
87f2e4c12c go.mod: bump github.com/kr/pty to build on openbsd/arm64
$ GOOS=openbsd GOARCH=arm64 go install tailscale.com/cmd/...@latest
pkg/mod/github.com/kr/pty@v1.1.4-0.20190131011033-7dc38fb350b1/pty_openbsd.go:24:10: undefined: ptmget
pkg/mod/github.com/kr/pty@v1.1.4-0.20190131011033-7dc38fb350b1/pty_openbsd.go:25:34: undefined: ioctl_PTMGET

"go mod tidy" did some unrelated work in go.sum, maybe because it was
not run with Go 1.16 before.

Signed-off-by: Filippo Valsorda <hi@filippo.io>
2021-02-20 09:53:47 -08:00
Brad Fitzpatrick
86d3a6c9a6 Switch to Go 1.16.
Fixes #1370

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-19 13:18:31 -08:00
Brad Fitzpatrick
9748c5414e portlist: adjust build tags for iOS + Go 1.16
Updates #943
Updates #1370

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-19 10:03:33 -08:00
Brad Fitzpatrick
826f64e863 cmd/tailscale/cli: add netcheck dev knob TS_DEBUG_NETCHECK_UDP_BIND 2021-02-19 07:48:35 -08:00
Brad Fitzpatrick
7ad3af2141 cmd/tailscale/cli: remove outdated TODO
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-18 15:11:00 -08:00
Sonia Appasamy
76fb27bea7 dnsname,tailcfg: add hostname sanitation logic to node display names (#1304)
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
2021-02-18 17:15:38 -05:00
Brad Fitzpatrick
c386496e4f version: bump date 2021-02-18 13:36:48 -08:00
Brad Fitzpatrick
fd8e070d01 health, control/controlclient, wgengine: report when router unhealthy
Updates tailscale/corp#1338

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-18 11:48:48 -08:00
Brad Fitzpatrick
2d96215d97 wgengine/router: make Linux delRoute idempotent, cidrDiff fail late as possible
This makes cidrDiff do as much as possible before failing, and makes a
delete of an already-deleted rule be a no-op. We should never do this
ourselves, but other things on the system can, and this should help us
recover a bit.

Also adds the start of root-requiring tests.

TODO: hook into wgengine/monitor and notice when routes are changed
behind our back, and invalidate our routes map and re-read from
kernel (via the ip command) at least on the next reconfig call.

Updates tailscale/corp#1338

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-18 10:36:00 -08:00
Brad Fitzpatrick
6a2c6541da net/tshttpproxy: support HTTP proxy environment credentials on Windows too
and some minor style nits.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-18 08:27:37 -08:00
Brad Fitzpatrick
96a488e37e wgengine/router: simplify func normalizeCIDR using netaddr method 2021-02-17 21:35:33 -08:00
Brad Fitzpatrick
38629b62fc cmd/tailscaled: on darwin, fail early if not root with nicer message
Don't do it on all platforms, as Linux folk might be playing
container + capability games.
2021-02-17 15:45:50 -08:00
Christine Dodrill
3e5c3e932c net/tshttpproxy: support basic auth when available (#1354)
This allows proxy URLs such as:

    http://azurediamond:hunter2@192.168.122.154:38274

to be used in order to dial out to control, logs or derp servers.

Signed-off-by: Christine Dodrill <xe@tailscale.com>
2021-02-17 16:01:47 -05:00
Brad Fitzpatrick
d98ef5699d wgengine/filter: remove redundant code
no generated code change.
2021-02-17 09:11:28 -08:00
Brad Fitzpatrick
7038c09bc9 ipn/ipnserver: on darwin, let users who are admins use CLI without sudo
Tangentially related to #987, #177, #594, #925, #505

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-16 21:09:27 -08:00
Brad Fitzpatrick
d3efe8caf6 safesocket, ipn/ipnserver: look up peer creds on Darwin
And open up socket permissions like Linux, now that we know who
connections are from.

This uses the new inet.af/peercred that supports Linux and Darwin at
the moment.

Fixes #1347
Fixes #1348

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-16 20:38:44 -08:00
Brad Fitzpatrick
65815cc1ac wgengine/tsdns: skip test that requires local IPv6 when IPv6 unavailable
Fixes #1292

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-16 10:50:37 -08:00
Brad Fitzpatrick
4ec01323c1 control/controlclient: note package type in Hostinfo
Fixes tailscale/corp#440

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-15 13:24:05 -08:00
Brad Fitzpatrick
73552eb32e tailcfg: add Hostinfo.Package
Updates tailscale/corp#440
2021-02-15 12:58:56 -08:00
Brad Fitzpatrick
dec01ef22b safesocket: make ConnectDefault use paths pkg, fixing tailscaled-on-macOS
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-15 11:33:12 -08:00
Brad Fitzpatrick
7e00100a0a cmd/hello: make whois client work on macOS against GUI client
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-15 11:33:09 -08:00
Brad Fitzpatrick
fdac0387a7 ipn/ipnserver, ipn/ipnlocal: move whois handler to new localapi package 2021-02-15 10:46:22 -08:00
Brad Fitzpatrick
36189e2704 wgengine/monitor: prevent shutdown hang in darwin link monitor 2021-02-15 08:59:53 -08:00
Brad Fitzpatrick
bbb4631e04 safesocket, wgengine: add some darwin failure diagnostic hints 2021-02-15 08:40:52 -08:00
Brad Fitzpatrick
f4ae745b0b net/{interfaces,netns}: add some new tests, missed from prior commit
I meant for these to be part of 52e24aa966.
2021-02-14 21:18:27 -08:00
Brad Fitzpatrick
e923639feb net/interfaces: fix staticcheck error on darwin 2021-02-14 21:17:12 -08:00
Brad Fitzpatrick
d7569863b5 cmd/tailscaled: fix up install-system-daemon on darwin, add uninstall too
Tangentially related to #987, #177, #594, #925, #505
2021-02-14 21:12:30 -08:00
Brad Fitzpatrick
52e24aa966 net/{interfaces,ns}: add tailscaled-mode darwin routing looping prevention
Fixes #1331

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-14 12:47:47 -08:00
Brad Fitzpatrick
4f7d60ad42 wgengine/monitor: add a darwin implementation for tailscaled mode
Tangentially related to #987, #177, #594, #925, #505

Motivated by rebooting a launchd-controlled tailscaled and it going
into SetNetworkUp(false) mode immediately because there really is no
network up at system boot, but then it got stuck in that paused state
forever, without a monitor implementation.
2021-02-13 21:09:27 -08:00
Brad Fitzpatrick
29b028b9c4 cmd/tailscaled: add subcommand on darwin to install+start tailscaled under launchd
Tangentially related to #987, #177, #594, #925.
2021-02-13 12:57:49 -08:00
Brad Fitzpatrick
54e108ff4e paths: update some default paths for darwin 2021-02-13 12:10:20 -08:00
Brad Fitzpatrick
20e66c5b92 net/interfaces: reconcile interface filtering with address printing in logs
The interface.State logging tried to only log interfaces which had
interesting IPs, but the what-is-interesting checks differed between
the code that gathered the interface names to print and the printing
of their addresses.
2021-02-12 18:42:45 -08:00
Josh Bleecher Snyder
c7e5ab8094 wgengine/magicsock: retry and re-send packets in TestTwoDevicePing
When a handshake race occurs, a queued data packet can get lost.
TestTwoDevicePing expected that the very first data packet would arrive.
This caused occasional flakes.

Change TestTwoDevicePing to repeatedly re-send packets
and succeed when one of them makes it through.

This is acceptable (vs making WireGuard not drop the packets)
because this only affects communication with extremely old clients.
And those extremely old clients will eventually connect,
because the kernel will retry sends on timeout.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-02-12 14:18:58 -08:00
Brad Fitzpatrick
ca51529b81 derp/derphttp: return nicer errors from Recv on Close 2021-02-12 12:04:16 -08:00
Brad Fitzpatrick
741d654aa3 derp/derphttp: add a context and infoLogger option to RunWatchConnectionLoop 2021-02-12 10:59:11 -08:00
Josh Bleecher Snyder
1632f9fd6b wgengine/magicsock: reduce log spam during tests
Only do the type assertion to *net.UDPAddr when addr is non-nil.
This prevents a bunch of log spam during tests.
2021-02-12 10:49:02 -08:00
Josh Bleecher Snyder
88586ec4a4 wgengine/magicsock: remove an alloc from ReceiveIPvN
We modified the standard net package to not allocate a *net.UDPAddr
during a call to (*net.UDPConn).ReadFromUDP if the caller's use
of the *net.UDPAddr does not cause it to escape.
That is https://golang.org/cl/291390.

This is the companion change to magicsock.
There are two changes required.
First, call ReadFromUDP instead of ReadFrom, if possible.
ReadFrom returns a net.Addr, which is an interface, which always allocates.
Second, reduce the lifetime of the returned *net.UDPAddr.
We do this by immediately converting it into a netaddr.IPPort.

We left the existing RebindingUDPConn.ReadFrom method in place,
as it is required to satisfy the net.PacketConn interface.

With the upstream change and both of these fixes in place,
we have removed one large allocation per packet received.

name           old time/op    new time/op    delta
ReceiveFrom-8    16.7µs ± 5%    16.4µs ± 8%     ~     (p=0.310 n=5+5)

name           old alloc/op   new alloc/op   delta
ReceiveFrom-8      112B ± 0%       64B ± 0%  -42.86%  (p=0.008 n=5+5)

name           old allocs/op  new allocs/op  delta
ReceiveFrom-8      3.00 ± 0%      2.00 ± 0%  -33.33%  (p=0.008 n=5+5)

Co-authored-by: Sonia Appasamy <sonia@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-02-12 09:52:43 -08:00
Josh Bleecher Snyder
0c673c1344 wgengine/magicsock: unify on netaddr types in addrSet
addrSet maintained duplicate lists of netaddr.IPPorts and net.UDPAddrs.
Unify to use the netaddr type only.

This makes (*Conn).ReceiveIPvN a bit uglier,
but that'll be cleaned up in a subsequent commit.

This is preparatory work to remove an allocation from ReceiveIPv4.

Co-authored-by: Sonia Appasamy <sonia@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-02-12 09:52:43 -08:00
Josh Bleecher Snyder
4cd9218351 wgengine/magicsock: prevent logging while running benchmarks
Co-authored-by: Sonia Appasamy <sonia@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-02-12 09:52:43 -08:00
Brad Fitzpatrick
be906dabd4 version: bump date 2021-02-11 20:11:00 -08:00
Brad Fitzpatrick
6680976b50 cmd/tailscaled: pick automatic tun device name on darwin 2021-02-11 20:10:07 -08:00
Brad Fitzpatrick
88ab0173a7 wgengine/router: fix BSD router to support multiple local addrs, IPv6
Fixes #1201
2021-02-11 19:13:03 -08:00
Ross Zurowski
25321cbd01 cmd/hello: truncate long strings (#1328)
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
2021-02-11 20:56:22 -05:00
Brad Fitzpatrick
5378776043 cmd/hello: chop DNS name at first dot 2021-02-11 16:38:26 -08:00
Ross Zurowski
6075135e0a cmd/hello: style welcome message (#1325)
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
2021-02-11 17:42:07 -05:00
Brad Fitzpatrick
917307a90c wgengine/tstun: reply to MagicDNS pings
Fixes #849

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-11 11:55:38 -08:00
Brad Fitzpatrick
34ffd4f7c6 cmd/hello: serve fake data in dev mode on whois failure 2021-02-11 10:57:08 -08:00
Brad Fitzpatrick
de3001bc79 cmd/hello: in dev mode, live reload template 2021-02-11 10:53:33 -08:00
Josh Bleecher Snyder
11bbfbd8bb go.mod: update to latest wireguard-go
All changes are trivial.
2021-02-10 14:14:11 -08:00
Josh Bleecher Snyder
635e4c7435 wgengine/magicsock: increase legacy ping timeout again
I based my estimation of the required timeout based on locally
observed behavior. But CI machines are worse than my local machine.
16s was enough to reduce flakiness but not eliminate it. Bump it up again.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-02-10 13:50:18 -08:00
Brad Fitzpatrick
1ec64bc94d wgengine/router: add another Windows firewall rule to allow incoming UDP
Based on @sailorfrag's research.

Fixes #1312

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-10 13:12:17 -08:00
Brad Fitzpatrick
7e201806b1 wgengine/magicsock: reconnect to DERP home after network comes back up
Updates #1310
2021-02-10 10:29:03 -08:00
Josh Bleecher Snyder
1f0fa8b814 go.mod: pull in upstream wireguard-go bug fixes 2021-02-10 08:04:12 -08:00
moncho
e101d8396d portlist, version: update build tags for Go 1.16, Apple M1
Build tags have been updated to build native Apple M1 binaries, existing build
tags for ios have been changed from darwin,arm64 to ios,arm64.

With this change, running go build cmd/tailscale{,d}/tailscale{,d}.go on an Apple
machine with the new processor works and resulting binaries show the expected
architecture, e.g. tailscale: Mach-O 64-bit executable arm64.

Tested using go version go1.16beta1 darwin/arm64.

Updates #943

Signed-off-by: moncho <50428+moncho@users.noreply.github.com>
2021-02-09 21:10:12 -08:00
Brad Fitzpatrick
cbd6224ca4 wgengine/winnet: don't build on non-windows
It only affects 'go install ./...', etc, and only on darwin/arm64 (M1 Macs) where
the go-ole package doesn't compile.

No need to build it.

Updates #943
2021-02-09 21:09:24 -08:00
Josh Bleecher Snyder
4a82e36491 go.mod: bump to latest wireguard-go
Stabilization and performance improvements.
2021-02-09 14:20:01 -08:00
Brad Fitzpatrick
9b4e50cec0 wgengine/magicsock: fix typo in comment 2021-02-09 09:37:24 -08:00
Naman Sood
07c3df13c6 wgengine/tstun: inform userspaceEngine about injected outbound packets in tundev
Signed-off-by: Naman Sood <mail@nsood.in>
2021-02-09 08:08:01 -08:00
Josh Bleecher Snyder
e7caad61fb wgengine: remove IpcGetOperation filter
This was in place because retrieved allowed_ips was very expensive.
Upstream changed the data structure to make them cheaper to compute.

This commit is an experiment to find out whether they're now cheap enough.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-02-08 20:22:55 -08:00
Brad Fitzpatrick
6b365b0239 wgengine/magicsock: fix DERP reader hang regression during concurrent reads
Fixes #1282

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-08 14:30:15 -08:00
Josh Bleecher Snyder
e1f773ebba wgengine/magicsock: allow more time for pings to transit
We removed the "fast retry" code from our wireguard-go fork.
As a result, pings can take longer to transit when retries are required. 
Allow that.

Fixes #1277

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-02-08 13:54:37 -08:00
Brad Fitzpatrick
6d2b8df06d wgengine/magicsock: add disabled failing (deadlocking) test for #1282
The fix can make this test run unconditionally.

This moves code from 5c619882bc for
testability but doesn't fix it yet. The #1282 problem remains (when I
wrote its wake-up mechanism, I forgot there were N DERP readers
funneling into 1 UDP reader, and the code just isn't correct at all
for that case).

Also factor out some test helper code from BenchmarkReceiveFrom.

The refactoring in magicsock.go for testability should have no
behavior change.
2021-02-06 21:34:16 -08:00
David Anderson
e86b39b73f ipn/ipnlocal: don't short-circuit default route filtering.
If no exit node is specified, the filter must still run to remove
offered default routes from all peers.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-05 20:33:18 -08:00
Brad Fitzpatrick
1e7a35b225 types/netmap: split controlclient.NetworkMap off into its own leaf package
Updates #1278

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-05 16:18:52 -08:00
Brad Fitzpatrick
ddfcc4326c types/persist: split controlclient.Persist into a small leaf package
This one alone doesn't modify the global dependency map much
(depaware.txt if anything looks slightly worse), but it leave
controlclient as only containing NetworkMap:

bradfitz@tsdev:~/src/tailscale.com/ipn$ grep -F "controlclient." *.go
backend.go:     NetMap        *controlclient.NetworkMap // new netmap received
fake_test.go:   b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
fake_test.go:   b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
handle.go:      netmapCache       *controlclient.NetworkMap
handle.go:func (h *Handle) NetMap() *controlclient.NetworkMap {

Once that goes into a leaf package, then ipn doesn't depend on
controlclient at all, and then the client gets smaller.

Updates #1278
2021-02-05 15:25:33 -08:00
David Anderson
a046b48593 cmd/tailscale/cli: display currently active exit node in tailscale status.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-05 14:53:17 -08:00
Brad Fitzpatrick
6064b6ff47 wgengine/wgcfg/nmcfg: split control/controlclient/netmap.go into own package
It couldn't move to ipnlocal due to test dependency cycles.

Updates #1278

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-05 14:21:30 -08:00
Josh Bleecher Snyder
138055dd70 tstest/natlab: use net.ErrClosed instead of a new error
Upstream wireguard-go decided to use errors.Is(err, net.ErrClosed)
instead of checking the error string.

It also provided an unsafe linknamed version of net.ErrClosed
for clients running Go 1.15. Switch to that.

This reduces the time required for the wgengine/magicsock tests
on my machine from ~35s back to the ~13s it was before
456cf8a376.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-02-05 13:44:46 -08:00
David Anderson
ace57d7627 wgengine/magicsock: set a dummy private key in benchmark.
Magicsock started dropping all traffic internally when Tailscale is
shut down, to avoid spurious wireguard logspam. This made the benchmark
not receive anything. Setting a dummy private key is sufficient to get
magicsock to pass traffic for benchmarking purposes.

Fixes #1270.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-05 13:36:05 -08:00
David Anderson
b9c2231fdf ipn: program exit node into the data plane according to user pref.
Part of #1153, #1154. Fixes #1224.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-05 13:07:11 -08:00
Brad Fitzpatrick
fb6b0e247c cmd/tailscaled: rename Windows service to just Tailscale
Updates #1232
2021-02-05 11:13:34 -08:00
Brad Fitzpatrick
98f9e82c62 logpolicy: on Windows, use tailscale-ipn log name if it already existed
For the migration to tailscaled.exe on Windows, don't create a new logid
if one existed under the old filename.

Updates #1232
2021-02-05 10:57:51 -08:00
Brad Fitzpatrick
e8d4afedd1 control/controlclient: don't call lite endpoint update path when logged out
This was the other half of the #1271 problem.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-05 10:00:35 -08:00
Brad Fitzpatrick
a7562be5e1 cmd/tailscaled: move more of the Windows server setup code into tailscaled
Updates #1232
2021-02-05 09:53:54 -08:00
Brad Fitzpatrick
6f7974b7f2 cmd/tailscaled: add missing depaware.txt update 2021-02-05 08:48:00 -08:00
Brad Fitzpatrick
6099ecf7f4 cmd/tailscaled: run as a service on Windows
Updates #1232
2021-02-05 08:46:12 -08:00
Brad Fitzpatrick
7529b74018 control/controlclient: avoid crash sending map request with zero node key
Fixes #1271

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-04 16:23:50 -08:00
Josh Bleecher Snyder
aa6856a9eb wgengine: adapt to wireguard-go changes
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-02-04 15:15:33 -08:00
Brad Fitzpatrick
d76334d2f0 ipn: split LocalBackend off into new ipn/ipnlocal package
And move a couple other types down into leafier packages.

Now cmd/tailscale doesn't bring in netlink, magicsock, wgengine, etc.

Fixes #1181

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-04 14:04:23 -08:00
Brad Fitzpatrick
6254efb9ef cmd/tailscale{,d}: move debug subcommand to tailscaled
Work on reducing the size of the tailscale binary, which is
currently pulling in most of the same code as tailscaled.

Updates #1181
2021-02-04 12:23:06 -08:00
Brad Fitzpatrick
70eb05fd47 wgengine: access flow pending problem with lock held
Missed review feedback from just-submitted d37058af72.
2021-02-04 11:18:32 -08:00
Brad Fitzpatrick
d37058af72 net/packet: add some more TSMP packet reject reasons and MaybeBroken bit
Unused for now, but I want to backport this commit to 1.4 so 1.6 can
start sending these and then at least 1.4 logs will stringify nicely.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-04 10:59:07 -08:00
Christine Dodrill
2f0cb98e50 logpolicy: rename target env var to TS_LOG_TARGET (#1267)
Signed-Off-By: Christine Dodrill <xe@tailscale.com>
2021-02-04 12:38:30 -05:00
Brad Fitzpatrick
f7eed25bb9 wgengine/magicsock: filter disco packets and packets when stopped from wireguard
Fixes #1167
Fixes tailscale/corp#219

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-04 09:38:02 -08:00
Christine Dodrill
81466eef81 Add an environment variable to enable customizing the log target (#1243)
Signed-off-by: Christine Dodrill <xe@tailscale.com>
2021-02-04 12:20:17 -05:00
David Anderson
45fe06a89f Revert "tailcfg: remove v6-overlay debug option."
This reverts commit da4ec54756.

Since v6 got disabled for Windows nodes, I need the debug flag back
to figure out why it was broken.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-03 16:11:56 -08:00
Josh Bleecher Snyder
e8cd7bb66f tstest: simplify goroutine leak tests
Use tb.Cleanup to simplify both the API and the implementation.

One behavior change: When the number of goroutines shrinks, don't log.
I've never found these logs to be useful, and they frequently add noise.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-02-03 13:06:40 -08:00
Brad Fitzpatrick
9a70789853 cmd/tailscale: fix IPN message reading stall in tailscale status -web
Fixes #1234
Updates #1254
2021-02-02 14:51:44 -08:00
Brad Fitzpatrick
a2aa6cd2ed wgengine/router: clarify disabled IPv6 message on Linux 2021-02-02 14:51:44 -08:00
David Crawshaw
d139fa9c92 net/interfaces: use a uint32_t for ipv4 address
The code was using a C "int", which is a signed 32-bit integer.
That means some valid IP addresses were negative numbers.
(In particular, the default router address handed out by AT&T
fiber: 192.168.1.254. No I don't know why they do that.)
A negative number is < 255, and so was treated by the Go code
as an error.

This fixes the unit test failure:

	$ go test -v -run=TestLikelyHomeRouterIPSyscallExec ./net/interfaces
	=== RUN   TestLikelyHomeRouterIPSyscallExec
	    interfaces_darwin_cgo_test.go:15: syscall() = invalid IP, false, netstat = 192.168.1.254, true
	--- FAIL: TestLikelyHomeRouterIPSyscallExec (0.00s)

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-02-02 13:32:58 -08:00
David Anderson
267531e4f8 wgengine/router: probe better for v6 policy routing support.
Previously we disabled v6 support if the disable_policy knob was
missing in /proc, but some kernels support policy routing without
exposing the toggle. So instead, treat disable_policy absence as a
"maybe", and make the direct `ip -6 rule` probing a bit more
elaborate to compensate.

Fixes #1241.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-01 16:12:17 -08:00
Josh Bleecher Snyder
717c715c96 wgengine/wglog: don't log failure to send data packets
Fixes #1239
2021-02-01 14:41:51 -08:00
Josh Bleecher Snyder
516e8a4838 tsweb: add num_goroutines expvar
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-02-01 14:38:59 -08:00
Josh Bleecher Snyder
dd10babaed wgenginer/magicsock: remove Addrs methods
They are now unused.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-02-01 14:05:05 -08:00
Brad Fitzpatrick
c7d4bf2333 cmd/tailscale/cli: recommend sudo for 'tailscale up' on failure
Fixes #1220
2021-02-01 13:53:57 -08:00
Brad Fitzpatrick
2889fabaef cmd/tailscaled/tailscaled.service: revert recent hardening for now
It broke Debian Stretch. We'll try again later.

Updates #1245

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-02-01 13:37:48 -08:00
Brad Fitzpatrick
761188e5d2 wgengine/wgcfg: fix validateEndpoints of empty string
Updates tailscale/corp#1238
2021-01-30 11:17:55 -08:00
Brad Fitzpatrick
914a486af6 safesocket: refactor macOS auth code, pull out separate LocalTCPPortAndToken 2021-01-29 14:34:57 -08:00
Brad Fitzpatrick
60e189f699 cmd/hello: use safesocket client to connect 2021-01-29 13:49:17 -08:00
Brad Fitzpatrick
006a224f50 ipn/ipnserver, cmd/hello: do whois over unix socket, not debug http
Start of a local HTTP API. Not a stable interface yet.
2021-01-29 13:23:13 -08:00
Josh Bleecher Snyder
fe7c3e9c17 all: move wgcfg from wireguard-go
This is mostly code movement from the wireguard-go repo.

Most of the new wgcfg package corresponds to the wireguard-go wgcfg package.

wgengine/wgcfg/device{_test}.go was device/config{_test}.go.
There were substantive but simple changes to device_test.go to remove
internal package device references.

The API of device.Config (now wgcfg.DeviceConfig) grew an error return;
we previously logged the error and threw it away.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-29 12:52:56 -08:00
Brad Fitzpatrick
0bc73f8e4f cmd/hello: new hello.ipn.dev server
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-29 12:23:13 -08:00
Brad Fitzpatrick
c611d8480b cmd/tailscaled: add whois/identd-ish debug handler 2021-01-28 15:31:52 -08:00
Brad Fitzpatrick
c7fc4a06da wgengine/router: don't configure IPv6 on Linux when IPv6 is unavailable
Fixes #1214

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-28 13:35:11 -08:00
David Anderson
de497358b8 cmd/tailscaled: add /run to the allowed paths for iptables.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-28 12:58:07 -08:00
Josh Bleecher Snyder
1e28207a15 types/logger: fix rateFree interaction with verbosity prefixes
We log lines like this:

c.logf("[v1] magicsock: disco: %v->%v (%v, %v) sent %v", c.discoShort, dstDisco.ShortString(), dstKey.ShortString(), derpStr(dst.String()), disco.MessageSummary(m))

The leading [v1] causes it to get unintentionally rate limited.
Until we have a proper fix, work around it.

Fixes #1216

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-28 10:15:56 -08:00
David Anderson
7a16ac80b7 VERSION.txt: this is 1.5.0. 2021-01-27 18:45:22 -08:00
Brad Fitzpatrick
4d943536f1 wgengine: don't leak TUN device in NewUserspaceEngine error path
Updates #1187

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-27 11:06:56 -08:00
Brad Fitzpatrick
9f5b0d058f wgengine: fix bugs from earlier fix
Fixes a regression from e970ed0995 that wasn't covered by tests
in this repo. (Our end-to-end tests in another repo caught this.)

Updates #1204
2021-01-27 10:32:08 -08:00
Sonia Appasamy
4dab0c1702 tailcfg: update node display name fields and methods (#1207)
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>

Consolidates the node display name logic from each of the clients into
tailcfg.Node. UI clients can use these names directly, rather than computing
them independently.
2021-01-27 11:50:31 -05:00
Brad Fitzpatrick
35e10c78fc net/interfaces: don't send over zt* interfaces
Fixes #1208

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-26 15:20:43 -08:00
David Anderson
692a011b54 net/interfaces: remove IsTailscaleIP, make callers use tsaddr.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-26 15:10:51 -08:00
Brad Fitzpatrick
e970ed0995 wgengine: fix crash reading long UAPI lines from legacy peers
Also don't log.Fatalf in a function returning an error.

Fixes #1204

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-26 11:39:13 -08:00
Brad Fitzpatrick
a7edcd0872 ipn/ipnstate: update tailscale status -web to match CLI 2021-01-26 08:29:59 -08:00
Brad Fitzpatrick
a98538f84a Merge branch 'main' of github.com:tailscale/tailscale into main 2021-01-25 15:53:13 -08:00
Brad Fitzpatrick
c3c59445ff ipn/ipnserver: on Windows in unattended mode, wait for Engine forever
Updates #1187
2021-01-25 15:52:24 -08:00
Brad Fitzpatrick
0dde8fa0a8 ipn/ipnserver: rearrange some code
No functional change. Make a future diff easier to read.
2021-01-25 15:46:39 -08:00
Brad Fitzpatrick
4d3c09ced4 ipn/ipnserver: on Windows in unattended mode, wait for Engine forever
Updates #1187
2021-01-25 15:32:13 -08:00
Sonia Appasamy
567c5a6d9e tailcfg, controlclient: add DisplayName field to tailcfg.Node and populate it from controlclient (#1191)
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
2021-01-25 17:41:39 -05:00
Brad Fitzpatrick
4fea604979 wgengine/router: stop setPrivateNetwork goroutine on configureInterface failure
On Windows, configureInterface starts a goroutine reconfiguring the
Windows firewall.

But if configureInterface fails later, that goroutine kept running and
likely failing forever, spamming logs. Make it stop quietly if its
launching goroutine filed.
2021-01-25 13:22:51 -08:00
Andrey Petrov
bf6205d200 LICENSE: Reformat for Github
Should be equivalent to the license before, but compatible with the library Github uses to detect the license for the project's metadata: https://docs.github.com/en/github/creating-cloning-and-archiving-repositories/licensing-a-repository#detecting-a-license

Signed-off-by: Andrey Petrov <andrey.petrov@shazow.net>
2021-01-24 16:20:22 -08:00
David Anderson
9f7cbf6cf1 wgengine/filter: add a Clone method.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-22 17:31:37 -08:00
Brad Fitzpatrick
9ce92aad3e cmd/tailscaled: update depaware.txt 2021-01-22 14:44:40 -08:00
Brad Fitzpatrick
fa3543d629 control/controlclient: use more direct way of getting the MagicDNS suffix
Suggested by Avery earlier. Ends up fixing bug in "tailscale status" when
MagicDNS if off too:
https://forum.tailscale.com/t/1-3-293-is-released-a-1-4-0-pre-release/349/11?u=bradfitz
2021-01-22 14:30:56 -08:00
Brad Fitzpatrick
e7bf144c3f ipn, wgengine/filter: fix Shields Up recent regression and old bug
Fixes #1192 (regression)
Fixes #1193 (old bug)
2021-01-22 13:39:53 -08:00
Brad Fitzpatrick
97496a83af wgengine/tstun: also support DropSilently on PostFilterIn
Not a problem (yet). But should be consistent with other places that support both
types of drops.
2021-01-22 13:22:32 -08:00
Brad Fitzpatrick
eb47cba435 cmd/tailscaled: don't require --state for --cleanup 2021-01-22 11:35:22 -08:00
Brad Fitzpatrick
daf2c70a08 go.mod: bump wireguard-go 2021-01-21 20:03:35 -08:00
Josh Bleecher Snyder
d5baeeed5c wgengine: use Tailscale-style peer identifiers in logs
Rewrite log lines on the fly, based on the set of known peers.

This enables us to use upstream wireguard-go logging,
but maintain the Tailscale-style peer public key identifiers
that the rest of our systems (and people) expect.

Fixes #1183

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-21 19:13:32 -08:00
Brad Fitzpatrick
4306433d1c cmd/tailscale: make "tailscale ping" also resolve names without DNS
This lets "tailscale ping $NAME" work even if MagicDNS is off, letting you
ping a name that shows up in "tailscale status".

More user friendly.
2021-01-21 15:45:36 -08:00
Brad Fitzpatrick
9541886856 wgengine/magicsock: disable regular STUNs for all platforms by default
Reduces background CPU & network.

Updates #1034

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-21 14:56:07 -08:00
David Anderson
49d00b6a28 tailcfg: add StableID to Node. #1178
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-21 13:33:19 -08:00
Brad Fitzpatrick
54d0d83b67 safesocket: on Linux, make /var/run/tailscale be 0755
Continuation of earlier two umask changes,
5611f290eb and
d6e9fb1df0.

This change mostly affects us, running tailscaled as root by hand (wit
a umask of 0077), not under systemd. End users running tailscaled
under systemd won't have a umask.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-21 13:23:14 -08:00
Steve Coffman
fec9490378 Add docker build script to inject version information
Signed-off-by: Steve Coffman <steve@khanacademy.org>
2021-01-21 12:42:53 -08:00
Brad Fitzpatrick
c55d26967b wgengine/magicsock: log more details of endpoints learned over disco
Also, don't try to use IPv6 LinkLocalUnicast addresses for now. Like endpoints
exchanged with control, we share them but don't yet use them.

Updates #1172
2021-01-21 08:06:14 -08:00
Brad Fitzpatrick
9f1b02699a tstime: add RandomDurationBetween helper
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-21 07:54:14 -08:00
Brad Fitzpatrick
a905ce5607 control/controlclient: add debug knob to not use control's endpoints 2021-01-20 21:31:06 -08:00
Brad Fitzpatrick
359055d3fa wgengine/magicsock: fix logging regression
c8c493f3d9 made it always say
`created=false` which scared me when I saw it, as that would've implied
things were broken much worse. Fortunately the logging was just wrong.
2021-01-20 20:48:02 -08:00
Brad Fitzpatrick
b5628cee4e control/controlclient: add detail to verbose log about route skips 2021-01-20 19:28:21 -08:00
Brad Fitzpatrick
edf64e0901 wgengine/magicsock: send, use endpoints in CallMeMaybe messages
Fixes #1172

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-20 14:59:41 -08:00
Brad Fitzpatrick
ec77b80c53 tailcfg, control/controlclient: add mapver 10: MapResponse.PeerSeenChange
This adds a more wire-efficient way of updating peers' Node.LastSeen times.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-20 13:20:21 -08:00
Brad Fitzpatrick
b5b4992eff disco: support parsing/encoding endpoints in call-me-maybe frames
Updates #1172

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-20 12:16:33 -08:00
Josh Bleecher Snyder
d3dd7c6270 wgengine/magicsock: make legacy DstToString match Addrs
DstToString is used in two places in wireguard-go: Logging and uapi.

We are switching to use uapi for wireguard-go config.
To preserve existing behavior, we need the full set of addrs.

And for logging, having the full set of addrs seems useful.

(The Addrs method itself is slated for removal. When that happens,
the implementation will move to DstToString.)


Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-20 10:31:51 -08:00
Brad Fitzpatrick
187e22a756 wgengine/magicsock: don't run the DERP cleanup so often
To save CPU and wakeups, don't run the DERP cleanup timer regularly
unless there is a non-home DERP connection open.

Also eliminates the goroutine, moving to a time.AfterFunc.

Updates #1034

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-19 18:14:25 -08:00
David Anderson
ab9cccb292 cmd/tailscale/cli: require v4 and v6 default routes to be advertised together.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-19 16:49:06 -08:00
David Anderson
78338ac029 types/logger: trim spaces from the rate-limited example message.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-19 16:48:44 -08:00
Brad Fitzpatrick
b405644f5d api.md: add TOC 2021-01-19 12:35:09 -08:00
Josh Bleecher Snyder
5fe5402fcd Revert "wgengine/magicsock: shortcircuit discoEndpoint.heartbeat when its connection is closed"
This reverts commit 08baa17d9a.
It caused deadlocks due to lock ordering violations.
It was not the right fix, and thus should simply be reverted
while we look for the right fix (if we haven't already found it
in the interim; we've fixed other logging-after-test issues).

Fixes #1161
2021-01-19 11:44:32 -08:00
Josh Bleecher Snyder
e4c075cd95 wgengine/magicsock: prevent log-after-test in TestTwoDevicePing 2021-01-19 11:04:17 -08:00
Brad Fitzpatrick
edce91a8a6 wgengine/magicsock: fix a naked return bug/crash where we returned (nil, true)
The 'ok' from 'ipp, ok :=' above was the result parameter ok. Whoops.
2021-01-19 10:57:40 -08:00
Brad Fitzpatrick
51bd1feae4 wgengine/magicsock: add single element IPPort->endpoint cache in receive path
name           old time/op  new time/op  delta
ReceiveFrom-4  21.8µs ± 2%  20.9µs ± 2%  -4.27%  (p=0.000 n=10+10)

Updates #414

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-18 21:40:58 -08:00
David Anderson
da4ec54756 tailcfg: remove v6-overlay debug option.
It's about to become a no-op in control.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-18 17:47:23 -08:00
Brad Fitzpatrick
5c619882bc wgengine/magicsock: simplify ReceiveIPv4+DERP path
name           old time/op  new time/op  delta
ReceiveFrom-4  35.8µs ± 3%  21.9µs ± 5%  -38.92%  (p=0.008 n=5+5)

Fixes #1145
Updates #414

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-18 15:23:17 -08:00
David Anderson
9936cffc1a wgengine: correctly track all node IPs in lazy config.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-18 13:32:16 -08:00
Brad Fitzpatrick
3fa86a8b23 wgengine/magicsock: use relatively new netaddr.IPPort.IsZero method 2021-01-15 19:21:10 -08:00
Brad Fitzpatrick
4811236189 wgengine/magicsock: speed up BenchmarkReceiveFrom, store context.Done chan
context.cancelCtx.Done involves a mutex and isn't as cheap as I
previously assumed. Convert the donec method into a struct field and
store the channel value once. Our one magicsock.Conn gets one pointer
larger, but it cuts ~1% of the CPU time of the ReceiveFrom benchmark
and removes a bubble from the --svg output :)
2021-01-15 19:19:27 -08:00
Brad Fitzpatrick
c78ed5b399 go.sum: update (forgotten after earlier wireguard-go update again) 2021-01-15 19:19:27 -08:00
Denton Gentry
013da6660e logtail: add tests
+ add a test for parseAndRemoveLogLevel()
+ add a test for drainPendingMessages()
+ test JSON log encoding including several special cases

Other tests frequently send logs but a) don't check the result and
b) do so by happenstance, such that the code in encode() was not
consistently being exercised and leading to spurious changes in
code coverage. These tests attempt to more systematically test
the logging function.

This is the second attempt to add these tests, the first attempt
(in https://github.com/tailscale/tailscale/pull/1114) had two issues:
1. httptest.NewServer creates multiple goroutine handlers, and
   logtail uses goroutines to upload, but the first version had no
   locking in the server to guard this.
   Moved data handling into channels to get synchronization.
2. The channel to notify the test of the arrival of data had a depth
   of 1, in cases where the Logger sent multiple uploads it would
   block the server.

This resulted in the first iteration of these tests being flaky,
and we reverted it.

This new version of the tests has passed with
    go test -race -count=10000
and seems solid.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-15 19:11:40 -08:00
Denton Gentry
8578b0445d tstun: add test to send a packet after Close()
This test serves two purposes:
+ check that Write() returns an error if the tstun has been
  closed.
+ ensure that the close-related code in tstun is exercised in
  a test case. We were getting spurious code coverage adds/drops
  based on timing of when the test case finished.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-15 19:11:40 -08:00
Josh Bleecher Snyder
7c1a9e8616 net/nettest: de-flake tests on Windows
Windows has a low resolution timer.
Some of the tests assumed that unblock takes effect immediately.

Consider:

t := time.Now()
elapsed := time.Now().After(t)

It seems plausible that elapsed should always be true.
However, with a low resolution timer, that might fail.

Change time.Now().After to !time.Now().Before,
so that unblocking always takes effect immediately.

Fixes #873.
2021-01-15 18:21:56 -08:00
Josh Bleecher Snyder
a64d06f15c net/nettest: remove pointless checks in tests
If err == nil, then !errors.Is(err, anything).
2021-01-15 18:21:56 -08:00
Josh Bleecher Snyder
503db5540f net/nettest: add missing check at end of TestLimit
This appears to have been an oversight.
2021-01-15 18:21:56 -08:00
Josh Bleecher Snyder
ed2169ae99 wgengine/magicsock: prevent logging after TestActiveDiscovery completes 2021-01-15 18:19:20 -08:00
Josh Bleecher Snyder
12bb949178 go.mod: bump to pull in minor wireguard-go changes 2021-01-15 17:35:03 -08:00
Josh Bleecher Snyder
63af950d8c wgengine/magicsock: adapt to wireguard-go without UpdateDst
22507adf54 stopped relying on
our fork of wireguard-go's UpdateDst callback.
As a result, we can unwind that code,
and the extra return value of ReceiveIPv{4,6}.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-15 17:13:58 -08:00
Denton Gentry
23c2dc2165 magicksock: remove TestConnClosing. (#1140)
Test is flakey, remove it and figure out what to do differently later.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-15 16:55:30 -08:00
David Anderson
e23b4191c4 wgengine/magicsock: disable legacy networking everywhere except TwoDevicePing.
TwoDevicePing is explicitly testing the behavior of the legacy codepath, everything
else is happy to assume that code no longer exists.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-15 16:02:31 -08:00
David Anderson
0733c5d2e0 wgengine/magicsock: disable legacy behavior in a few more tests.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-15 15:57:41 -08:00
David Anderson
57d95dd005 wgengine/magicsock: default legacy networking to off for some tests.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-15 15:54:45 -08:00
David Anderson
a2463e8948 wgengine/magicsock: add an option to disable legacy peer handling.
Used in tests to ensure we're not relying on behavior we're going
to remove eventually.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-15 15:01:33 -08:00
David Anderson
d456bfdc6d wgengine/magicsock: fix BenchmarkReceiveFrom.
Previously, this benchmark relied on behavior of the legacy
receive codepath, which I changed in 22507adf. With this
change, the benchmark instead relies on the new active discovery
path.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-15 15:01:33 -08:00
Josh Bleecher Snyder
2d837f79dc wgengine/magicsock: close test loggers once we're done with them
This is a big hammer approach to helping with #1132.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-15 14:44:56 -08:00
Josh Bleecher Snyder
08baa17d9a wgengine/magicsock: shortcircuit discoEndpoint.heartbeat when its connection is closed
This prevents us from continuing to do unnecessary work
(including logging) after the connection has closed.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-15 14:44:56 -08:00
Josh Bleecher Snyder
7c76435bf7 wgengine/magicsock: simplify
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-15 14:44:56 -08:00
Josh Bleecher Snyder
d2529affa2 wgengine/magicsock: quiet wireguard-go logging in tests
We already do this in newUserspaceEngineAdvanced.
Apply it to newMagicStack as well.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-15 14:44:56 -08:00
Josh Bleecher Snyder
3ad7c2133a wgengine/userspace: make wireguard-go log silencing include peer routines
Also suppress log lines like:

peer(Kksd…ySmc) - Routine: sequential sender - stopped

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-15 14:44:56 -08:00
Brad Fitzpatrick
b560386c1a net/packet, wgengine, tstun: add inter-node TSMP protocol for connect errors
This adds a new IP Protocol type, TSMP on protocol number 99 for
sending inter-tailscale messages over WireGuard, currently just for
why a peer rejects TCP SYNs (ACL rejection, shields up, and in the
future: nothing listening, something listening on that port but wrong
interface, etc)

Updates #1094
Updates tailscale/corp#1185

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-15 14:03:57 -08:00
David Anderson
01e8b7fb7e go.mod: bump wireguard-go version.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-15 10:53:49 -08:00
Brad Fitzpatrick
5611f290eb ipn, ipnserver: only require sudo on Linux for mutable CLI actions
This partially reverts d6e9fb1df0, which modified the permissions
on the tailscaled Unix socket and thus required "sudo tailscale" even
for "tailscale status".

Instead, open the permissions back up (on Linux only) but have the
server look at the peer creds and only permit read-only actions unless
you're root.

In the future we'll also have a group that can do mutable actions.

On OpenBSD and FreeBSD, the permissions on the socket remain locked
down to 0600 from d6e9fb1df0.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-15 10:13:00 -08:00
Brad Fitzpatrick
a45665426b cmd/tailscale/cli: tweak the status name column a bit
* make peers without DNS names show their hostnames as always one column, for cut/etc users
* remove trailing dot from shared peers' DNS names
2021-01-15 07:46:58 -08:00
Naman Sood
420c7a35e2 wgengine/netstack: use tailscale IPs instead of a hardcoded one (#1131)
Signed-off-by: Naman Sood <mail@nsood.in>
2021-01-15 09:16:28 -05:00
Brad Fitzpatrick
3ac952d4e9 go.sum: update 2021-01-14 20:19:44 -08:00
Brad Fitzpatrick
a4b39022e0 wgengine/tsdns: fix MagicDNS lookups of shared nodes
Fixes tailscale/corp#1184
2021-01-14 14:49:32 -08:00
Brad Fitzpatrick
b00c0e5f60 go.sum: update 2021-01-14 14:49:32 -08:00
Alex Brainman
6e4231c03c wgengine/router/dns: remove unused code
Commit 68ddf1 removed code that reads
`SOFTWARE\Tailscale IPN\SearchList` registry value. But the commit
left code that writes that value.

So now this package writes and never reads the value.

Remove the code to stop pointless work.

Updates #853

Signed-off-by: Alex Brainman <alex.brainman@gmail.com>
2021-01-14 14:04:35 -08:00
Josh Bleecher Snyder
654b5f1570 all: convert from []wgcfg.Endpoint to string
This eliminates a dependency on wgcfg.Endpoint,
as part of the effort to eliminate our wireguard-go fork.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-14 13:54:07 -08:00
David Anderson
9abcb18061 wgengine/magicsock: import more of wireguard-go, update docstrings.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-14 12:56:48 -08:00
David Anderson
22507adf54 wgengine/magicsock: stop depending on UpdateDst in legacy codepaths.
This makes connectivity between ancient and new tailscale nodes slightly
worse in some cases, but only in cases where the ancient version would
likely have failed to get connectivity anyway.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-01-14 12:56:48 -08:00
Brad Fitzpatrick
017dcd520f tsweb: export VarzHandler 2021-01-14 11:49:44 -08:00
Brad Fitzpatrick
c1dabd9436 control/controlclient: let clients opt in to Sharer-vs-User split model
Updates tailscale/corp#1183
2021-01-13 15:03:15 -08:00
Josh Bleecher Snyder
b38fa7de29 go.mod: update to latest wireguard-go 2021-01-13 14:41:25 -08:00
Josh Bleecher Snyder
020084e84d wgengine: adapt to removal of wgcfg.Key in wireguard-go 2021-01-13 14:39:34 -08:00
Smitty
2bf49ddf90 Provide example when format string is rate limited
Here's an example log line in the new format:
    [RATE LIMITED] format string "open-conn-track: timeout opening %v; no associated peer node" (example: "open-conn-track: timeout opening ([ip] => [ip]); no associated peer node")
This should make debugging logging issues a bit easier, and give more
context as to why something was rate limited. This change was proposed
in a comment on #1110.

Signed-off-by: Smitty <me@smitop.com>
2021-01-13 13:57:23 -08:00
Denton Gentry
ce058c8280 Revert "Add logtail tests (#1114)" (#1116)
This reverts commit e4f53e9b6f.

At least two of these tests are flakey, reverting until they can be
made more robust.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-12 15:48:11 -08:00
Smitty
b2a08ddacd wgengine/tsdns: return NOERROR instead of NOTIMP for most records
This is what every other DNS resolver I could find does, so tsdns
should do it to. This also helps avoid weird error messages about
non-existent records being unimplemented, and thus fixes #848.

Signed-off-by: Smitty <me@smitop.com>
2021-01-12 15:12:53 -08:00
Denton Gentry
e4f53e9b6f Add logtail tests (#1114)
* logtail: test parseAndRemoveLogLevel()

Signed-off-by: Denton Gentry <dgentry@tailscale.com>

* logtail: test JSON log encoding.

Expand TestUploadMessages to also exercise the encoding functions
in logtail, like JSON logging and timestamps.

Other tests frequently send logs but a) don't check the result and
b) do so by happenstance, such that the lines in encode() were not
consistently being exercised and leading to spurious changes in
code coverage.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>

* logtail: add a test for drainPendingMessages

Make the client buffer some messages before the upload server
becomes available.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>

* logtail: use %q, raw strings, and io.WriteString

%q escapes binary characters for us.

raw strings avoid so much backslash escaping

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-12 13:31:45 -08:00
Brad Fitzpatrick
b987b2ab18 control/controlclient: treat node sharer as owner for display purposes
This make clients (macOS, Windows, tailscale status) show the node
sharer's profile rather than the node owner (which may be anonymized).

Updates #992
2021-01-12 12:15:35 -08:00
Brad Fitzpatrick
7acd3397d5 README: names of contributors, link to them instead 2021-01-12 08:24:32 -08:00
Brad Fitzpatrick
9d73f84a71 tailcfg, control/controlclient: make MapResponse.CollectServices an opt.Bool
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-12 08:08:00 -08:00
Christina Wen
a746ff5de7 API.md: add documentation for deleting a device
Signed-off-by: Christina Wen <christina@tailscale.com>
2021-01-12 06:01:00 -08:00
Christina Wen
8d7ddf5e94 API.md: rename "domain" to "tailnet"
Signed-off-by: Christina Wen <christina@tailscale.com>
2021-01-12 06:01:00 -08:00
Denton Gentry
ac42757cd7 netcheck: use reflect in sortRegions test.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-12 04:29:28 -08:00
Denton Gentry
43e060b0e5 netcheck: test sortRegions
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-12 04:29:28 -08:00
Denton Gentry
8349e10907 magicsock: add description of testClosingContext
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-12 04:29:28 -08:00
Denton Gentry
b771a1363b logtail: start a local server for TestFastShutdown
Right now TestFastShutdown tries to upload logs to localhost:1234,
which will most likely respond with an error. However if one has an
actual service running on port 1234, it would receive a connection
attempting to POST every time the unit test runs.

Start a local server and direct the upload there instead.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-12 04:29:28 -08:00
Denton Gentry
2e9728023b magicsock: test error case in sendDiscoMessage
In sendDiscoMessage there is a check of whether the connection is
closed, which is not being reliably exercised by other tests.
This shows up in code coverage reports, the lines of code in
sendDiscoMessage are alternately added and subtracted from
code coverage.

Add a test to specifically exercise and verify this code path.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-12 04:29:28 -08:00
Denton Gentry
2c328da094 logtail: add a test to upload logs to local server
Start an HTTP server to accept POST requests, and upload some logs to
it. Check that uploaded logs were received.

Code in logtail:drainPending was not being reliably exercised by other
tests. This shows up in code coverage reports, as lines of code in
drainPending are alternately added and subtracted from code coverage.
This test will reliably exercise and verify this code.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-12 04:29:28 -08:00
Denton Gentry
0aed59b691 portlist: add a test for SameInodes
Exercise all cases.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-12 04:29:28 -08:00
Denton Gentry
07e4009e15 portlist: fully exercise lessThan in tests
All cases in lessThan are not reliably exercised by other tests.
This shows up in code coverage metrics as lines in lessThan are
alternately added and removed from coverage.

Add a test case to systematically test all conditions.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-12 04:29:28 -08:00
Denton Gentry
0aa55bffce magicsock: test error case in derpWriteChanOfAddr
In derpWriteChanOfAddr when we call derphttp.NewRegionClient(),
there is a check of whether the connection is already errored and
if so it returns before grabbing the lock. The lock might already
be held and would be a deadlock.

This corner case is not being reliably exercised by other tests.
This shows up in code coverage reports, the lines of code in
derpWriteChanOfAddr are alternately added and subtracted from
code coverage.

Add a test to specifically exercise this code path, and verify that
it doesn't deadlock.

This is the best tradeoff I could come up with:
+ the moment code calls Err() to check if there is an error, we
  grab the lock to make sure it would deadlock if it tries to grab
  the lock itself.
+ if a new call to Err() is added in this code path, only the
  first one will be covered and the rest will not be tested.
+ this test doesn't verify whether code is checking for Err() in
  the right place, which ideally I guess it would.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-12 04:29:28 -08:00
Brad Fitzpatrick
85e54af0d7 wgengine: on TCP connect fail/timeout, log some clues about why it failed
So users can see why things aren't working.

A start. More diagnostics coming.

Updates #1094
2021-01-11 22:09:09 -08:00
Brad Fitzpatrick
5eeaea9ef9 net/packet: add TCPFlag type and some more constants
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-11 22:09:09 -08:00
Brad Fitzpatrick
ad3fb6125d net/flowtrack: add Tuple.String method
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-11 22:09:09 -08:00
Brad Fitzpatrick
d6e9fb1df0 all: adjust Unix permissions for those without umasks
Fixes tailscale/corp#1165

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-11 19:24:41 -08:00
Brad Fitzpatrick
6b08303b0f Dockerfile: add big warning banner
Updates #504
2021-01-11 19:23:47 -08:00
Brad Fitzpatrick
676b5b7946 net/netcheck: improve the preferred DERP hysteresis
Users in Amsterdam (as one example) were flipping back and forth
between equidistant London & Frankfurt relays too much.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-11 14:50:47 -08:00
Sonia Appasamy
024671406b ipn: only send services in Hostinfo if Tailnet has opted-in to services collection (#1107)
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
2021-01-11 17:24:32 -05:00
Brad Fitzpatrick
f85769b1ed wgengine/magicsock: drop netaddr.IPPort cache
netaddr.IP no longer allocates, so don't need a cache or all its associated
code/complexity.

This totally removes groupcache/lru from the deps.

Also go mod tidy.
2021-01-11 13:23:04 -08:00
Brad Fitzpatrick
a80446c026 Update depaware (removes lru from wgengine/filter) 2021-01-11 13:17:18 -08:00
Brad Fitzpatrick
4d15e954bd net/flowtrack: add new package to specialize groupcache/lru key type
Reduces allocs.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-11 13:08:03 -08:00
Naman Sood
f69e46175d wengine/netstack: bump gvisor to latest version
* wengine/netstack: bump gvisor to latest version

Signed-off-by: Naman Sood <naman@tailscale.com>

* update dependencies

Signed-off-by: Naman Sood <naman@tailscale.com>

* Don't change hardcoded IP

Signed-off-by: Naman Sood <naman@tailscale.com>
2021-01-11 15:46:48 -05:00
Brad Fitzpatrick
8b0112649a wgengine/netstack: don't build netstack on 32-bit platforms
See google/gvisor#5241
2021-01-11 09:56:05 -08:00
Brad Fitzpatrick
5aa5db89d6 cmd/tailscaled, wgengine/netstack: add start of gvisor userspace netstack work
Not usefully functional yet (mostly a proof of concept), but getting
it submitted for some work @namansood is going to do atop this.

Updates #707
Updates #634
Updates #48
Updates #835
2021-01-11 09:31:14 -08:00
Brad Fitzpatrick
5efb0a8bca cmd/tailscale: change formatting of "tailscale status"
* show DNS name over hostname, removing domain's common MagicDNS suffix.
  only show hostname if there's no DNS name.
  but still show shared devices' MagicDNS FQDN.

* remove nerdy low-level details by default: endpoints, DERP relay,
  public key.  They're available in JSON mode still for those who need
  them.

* only show endpoint or DERP relay when it's active with the goal of
  making debugging easier. (so it's easier for users to understand
  what's happening) The asterisks are gone.

* remove Tx/Rx numbers by default for idle peers; only show them when
  there's traffic.

* include peers' owner login names

* add CLI option to not show peers (matching --self=true, --peers= also
  defaults to true)

* sort by DNS/host name, not public key

* reorder columns
2021-01-10 12:11:22 -08:00
Brad Fitzpatrick
c09d5a9e28 go.mod: bump wireguard-go to match our meta repo 2021-01-08 21:15:32 -08:00
Brad Fitzpatrick
b5b9866ba2 wgengine/magicsock: copy self DNS name to PeerStatus, re-fill OS
The OS used to be sent back from the server but that has since
been removed as being redundant.
2021-01-08 20:55:57 -08:00
Brad Fitzpatrick
a4cc31e7d8 go.sum: update 2021-01-08 20:55:03 -08:00
Josh Bleecher Snyder
1271e135cd wgengine/tstun: initialize wireguard-go TUN parameters
This will enable us to remove the corresponding code from
our fork of wireguard-go.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-08 17:22:04 -08:00
Josh Bleecher Snyder
18471a8792 ipn: close logger at the end of TestLocalLogLines
If any goroutine continues to use the logger in TestLocalLogLines
after the test finishes, the test panics.

The culprit for this was wireguard-go; the previous commit fixed that.
This commit adds suspenders: When the test is done, make logging calls
into no-ops.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-08 17:10:48 -08:00
Josh Bleecher Snyder
1e4604f60e wgengine: quiet some wireguard-go logging
The log lines that wireguard-go prints as it starts
and stops its worker routines are mostly noise.
They also happen after other work is completed,
which causes failures in some of the log testing packages.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-08 17:10:48 -08:00
Josh Bleecher Snyder
c580d2eab1 go.mod: change wireguard-go version spelling
Our toolchains disagree about the spelling.
Sigh.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-08 15:58:11 -08:00
Josh Bleecher Snyder
53f9dcdf05 go.mod: update wireguard-go to fix windows build failure
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-08 15:56:45 -08:00
Josh Bleecher Snyder
80c33f4fa1 go.mod: update to latest wireguard-go 2021-01-08 15:44:07 -08:00
Josh Bleecher Snyder
e0c4ffa71f wgengine/tsdns: respond with any available addrs for ALL queries
This appears to have been the intent of the previous code,
but in practice, it only returned A records.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-01-08 14:23:11 -08:00
Denton Gentry
fa3e8e1a28 Add names to test cases in ipn/local_test.go.
There are so many now that just a number doesn't work well.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-08 10:23:32 -08:00
Denton Gentry
67ebc7c0e7 Allow 2021 in LICENSE header.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-08 10:23:32 -08:00
Denton Gentry
02c34881b5 Add more tests for Direct.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-08 10:23:32 -08:00
Denton Gentry
df64b7abf8 Add IPv6 Reverse DNS Lookup test.
To be honest I'm not fond of Golden Bytes tests like this, but
not so much as to want to rewrite the whole test. The DNS byte
format is essentially immutable at this point, the encoded bytes
aren't going to change. The rest of the test assumptions about
hostnames might, but we can fix that when it comes.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-08 10:23:32 -08:00
Denton Gentry
414cb4a695 Add test for dnsMapsEqual.
Exercises most cases in the function.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-08 10:23:32 -08:00
Denton Gentry
b716c76df9 cover one more case in TestStatusEqual.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-08 10:23:32 -08:00
Brad Fitzpatrick
2f04f49376 control/controlclient: use lite map request handler to avoid aborting streams
Previously, any change to endpoints or hostinfo (or hostinfo's
netinfo) would result in the long-running map request HTTP stream
being torn down and restarted, losing all compression context along
with it.

This change makes us instead send a lite map request (OmitPeers: true,
Stream: false) that doesn't subscribe to anything, and then the
coordination server knows to not close other streams for that node
when it recives a lite request.

Fixes tailscale/corp#797

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-08 09:30:08 -08:00
Denton Gentry
e692e3866b Cache go modules.
Apply Go actions cache, as described in
https://markphelps.me/2019/11/speed-up-your-go-builds-with-actions-cache/

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-07 21:34:43 -08:00
Denton Gentry
d12add6e22 Adjust coverage options.
+ we don't need an exactly accurate count of the number of times each
  time ran. Remove -covermode, the default "set" will be fine to just
  track whether a given line ran at all.
+ add -benchtime=1x. We only need to run the benchmarks once.
+ -bench=. to match any character.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-07 21:34:43 -08:00
Denton Gentry
332759ef73 Add coveralls.io support.
We include -bench because some parts of the codebase, like
smallzstd, do not have regular unit tests but do have very
good benchmark tests that covers all functions.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-07 21:34:43 -08:00
Alex Brainman
9985b3f1ed wgengine/monitor: close closeHandle
eccc167 introduced closeHandle which opened the handle,
but never closed it.

Windows handles should be closed.

Updates #921

Signed-off-by: Alex Brainman <alex.brainman@gmail.com>
2021-01-07 20:18:02 -08:00
Frederik “Freso” S. Olesen
83fccf9fe5 tailscaled.service: Lock down clock and /dev (#1071)
Research in issue #1063 uncovered why tailscaled would fail with
ProtectClock enabled (it implicitly enabled DevicePolicy=closed).

This knowledge in turn also opens the door for locking down /dev
further, e.g. explicitly setting DevicePolicy=strict (instead of
closed), and making /dev private for the unit.

Additional possible future (or downstream) lockdown that can be done
is setting `PrivateDevices=true` (with `BindPaths=/dev/net/`), however,
systemd 233 or later is required for this, and tailscaled currently need
to work for systemd down to version 215.

Closes https://github.com/tailscale/tailscale/issues/1063

Signed-off-by: Frederik “Freso” S. Olesen <freso.dk@gmail.com>
2021-01-07 10:18:55 -08:00
Brad Fitzpatrick
b5129dadfd ipn: fix buggy-looking format string in error log
On shutdown, logs showed:
wgengine status error: &errors.errorString{s:"engine closing; no status"}
2021-01-06 20:18:29 -08:00
Brad Fitzpatrick
66be052a70 net/dnscache: work on IPv6-only hosts (again)
This fixes the regression where we had stopped working on IPv6-only
hosts.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-06 19:53:13 -08:00
Brad Fitzpatrick
560da4884f tailcfg: add Node.Sharer field
Updates #992

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-05 13:53:00 -08:00
Christina Wen
d8a5b3f22f API.md: revise documentation to be more consistent
Signed-off-by: Christina Wen <christina@tailscale.com>
2021-01-05 14:33:28 -05:00
Christina Wen
3e3bd5f169 API.md: release API documentation
Co-authored-by: Daniel Chung <daniel@tailscale.com>
Signed-off-by: Christina Wen <christina@tailscale.com>
2021-01-05 14:33:28 -05:00
Brad Fitzpatrick
312646c516 tailcfg: add omitempty to FilterRule.SrcBits (#1089)
It's not used by recent clients, so even more reason to omit it.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-05 10:54:01 -08:00
Brad Fitzpatrick
e8ae355bb8 ipn: delete domainsForProxying, require explicit DNS search domains (mapver 9) (#1078)
Previously the client had heuristics to calculate which DNS search domains
to set, based on the peers' names. Unfortunately that prevented us from
doing some things we wanted to do server-side related to node sharing.

So, bump MapRequest.Version to 9 to signal that the client only uses the
explicitly configured DNS search domains and doesn't augment it with its own
list.

Updates tailscale/corp#1026

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-05 10:37:15 -08:00
Brad Fitzpatrick
1ccf997699 version: new version for a new year 2021-01-04 08:58:05 -08:00
321 changed files with 33280 additions and 8620 deletions

48
.github/workflows/coverage.yml vendored Normal file
View File

@@ -0,0 +1,48 @@
name: Code Coverage
on:
push:
branches:
- main
pull_request:
branches:
- '*'
jobs:
build:
runs-on: ubuntu-latest
if: "!contains(github.event.head_commit.message, '[ci skip]')"
steps:
- name: Set up Go
uses: actions/setup-go@v1
with:
go-version: 1.16
id: go
- name: Check out code into the Go module directory
uses: actions/checkout@v1
# https://markphelps.me/2019/11/speed-up-your-go-builds-with-actions-cache/
- name: Restore Cache
uses: actions/cache@preview
id: cache
with:
path: ~/go/pkg/mod
key: ${{ runner.os }}-${{ hashFiles('**/go.sum') }}
- name: Basic build
run: go build ./cmd/...
- name: Run tests on linux with coverage data
run: go test -race -coverprofile=coverage.txt -bench=. -benchtime=1x ./...
- name: coveralls.io
uses: shogo82148/actions-goveralls@v1
env:
COVERALLS_TOKEN: ${{ secrets.COVERALLS_TOKEN }}
GITHUB_TOKEN: ${{ secrets.COVERALLS_BOT_PUBLIC_REPO_TOKEN }}
with:
path-to-profile: ./coverage.txt

View File

@@ -19,7 +19,7 @@ jobs:
- name: Set up Go
uses: actions/setup-go@v1
with:
go-version: 1.15
go-version: 1.16
id: go
- name: Check out code into the Go module directory

View File

@@ -19,7 +19,7 @@ jobs:
- name: Set up Go
uses: actions/setup-go@v1
with:
go-version: 1.15
go-version: 1.16
id: go
- name: Check out code into the Go module directory

View File

@@ -19,7 +19,7 @@ jobs:
- name: Set up Go
uses: actions/setup-go@v1
with:
go-version: 1.15
go-version: 1.16
id: go
- name: Check out code into the Go module directory

View File

@@ -19,7 +19,7 @@ jobs:
- name: Set up Go
uses: actions/setup-go@v1
with:
go-version: 1.15
go-version: 1.16
id: go
- name: Check out code into the Go module directory

View File

@@ -16,7 +16,7 @@ jobs:
- name: Set up Go
uses: actions/setup-go@v1
with:
go-version: 1.15
go-version: 1.16
- name: Check out code
uses: actions/checkout@v1

View File

@@ -16,7 +16,7 @@ jobs:
- name: Set up Go
uses: actions/setup-go@v1
with:
go-version: 1.15
go-version: 1.16
- name: Check out code
uses: actions/checkout@v1

48
.github/workflows/linux-race.yml vendored Normal file
View File

@@ -0,0 +1,48 @@
name: Linux race
on:
push:
branches:
- main
pull_request:
branches:
- '*'
jobs:
build:
runs-on: ubuntu-latest
if: "!contains(github.event.head_commit.message, '[ci skip]')"
steps:
- name: Set up Go
uses: actions/setup-go@v1
with:
go-version: 1.16
id: go
- name: Check out code into the Go module directory
uses: actions/checkout@v1
- name: Basic build
run: go build ./cmd/...
- name: Run tests with -race flag on linux
run: go test -race ./...
- uses: k0kubun/action-slack@v2.0.0
with:
payload: |
{
"attachments": [{
"text": "${{ job.status }}: ${{ github.workflow }} <https://github.com/${{ github.repository }}/commit/${{ github.sha }}/checks|${{ env.COMMIT_DATE }} #${{ env.COMMIT_NUMBER_OF_DAY }}> " +
"(<https://github.com/${{ github.repository }}/commit/${{ github.sha }}|" + "${{ github.sha }}".substring(0, 10) + ">) " +
"of ${{ github.repository }}@" + "${{ github.ref }}".split('/').reverse()[0] + " by ${{ github.event.head_commit.committer.name }}",
"color": "danger"
}]
}
env:
SLACK_WEBHOOK_URL: ${{ secrets.SLACK_WEBHOOK_URL }}
if: failure() && github.event_name == 'push'

View File

@@ -19,7 +19,7 @@ jobs:
- name: Set up Go
uses: actions/setup-go@v1
with:
go-version: 1.15
go-version: 1.16
id: go
- name: Check out code into the Go module directory

View File

@@ -19,7 +19,7 @@ jobs:
- name: Set up Go
uses: actions/setup-go@v1
with:
go-version: 1.15
go-version: 1.16
id: go
- name: Check out code into the Go module directory

View File

@@ -16,7 +16,7 @@ jobs:
- name: Set up Go
uses: actions/setup-go@v1
with:
go-version: 1.15
go-version: 1.16
- name: Check out code
uses: actions/checkout@v1

52
.github/workflows/windows-race.yml vendored Normal file
View File

@@ -0,0 +1,52 @@
name: Windows race
on:
push:
branches:
- main
pull_request:
branches:
- '*'
jobs:
test:
runs-on: windows-latest
if: "!contains(github.event.head_commit.message, '[ci skip]')"
steps:
- name: Install Go
uses: actions/setup-go@v2
with:
go-version: 1.16.x
- name: Checkout code
uses: actions/checkout@v2
- name: Restore Cache
uses: actions/cache@v2
with:
path: ~/go/pkg/mod
key: ${{ runner.os }}-go-${{ hashFiles('**/go.sum') }}
restore-keys: |
${{ runner.os }}-go-
- name: Test with -race flag
run: go test -race ./...
- uses: k0kubun/action-slack@v2.0.0
with:
payload: |
{
"attachments": [{
"text": "${{ job.status }}: ${{ github.workflow }} <https://github.com/${{ github.repository }}/commit/${{ github.sha }}/checks|${{ env.COMMIT_DATE }} #${{ env.COMMIT_NUMBER_OF_DAY }}> " +
"(<https://github.com/${{ github.repository }}/commit/${{ github.sha }}|" + "${{ github.sha }}".substring(0, 10) + ">) " +
"of ${{ github.repository }}@" + "${{ github.ref }}".split('/').reverse()[0] + " by ${{ github.event.head_commit.committer.name }}",
"color": "danger"
}]
}
env:
SLACK_WEBHOOK_URL: ${{ secrets.SLACK_WEBHOOK_URL }}
if: failure() && github.event_name == 'push'

View File

@@ -19,7 +19,7 @@ jobs:
- name: Install Go
uses: actions/setup-go@v2
with:
go-version: 1.15.x
go-version: 1.16.x
- name: Checkout code
uses: actions/checkout@v2

View File

@@ -2,6 +2,23 @@
# Use of this source code is governed by a BSD-style
# license that can be found in the LICENSE file.
############################################################################
#
# WARNING: Tailscale is not yet officially supported in Docker,
# Kubernetes, etc.
#
# It might work, but we don't regularly test it, and it's not as polished as
# our currently supported platforms. This is provided for people who know
# how Tailscale works and what they're doing.
#
# Our tracking bug for officially support container use cases is:
# https://github.com/tailscale/tailscale/issues/504
#
# Also, see the various bugs tagged "containers":
# https://github.com/tailscale/tailscale/labels/containers
#
############################################################################
# This Dockerfile includes all the tailscale binaries.
#
# To build the Dockerfile:
@@ -21,7 +38,7 @@
# $ docker exec tailscaled tailscale status
FROM golang:1.15-alpine AS build-env
FROM golang:1.16-alpine AS build-env
WORKDIR /go/src/tailscale
@@ -31,7 +48,19 @@ RUN go mod download
COPY . .
RUN go install -v ./cmd/...
# see build_docker.sh
ARG VERSION_LONG=""
ENV VERSION_LONG=$VERSION_LONG
ARG VERSION_SHORT=""
ENV VERSION_SHORT=$VERSION_SHORT
ARG VERSION_GIT_HASH=""
ENV VERSION_GIT_HASH=$VERSION_GIT_HASH
RUN go install -tags=xversion -ldflags="\
-X tailscale.com/version.Long=$VERSION_LONG \
-X tailscale.com/version.Short=$VERSION_SHORT \
-X tailscale.com/version.GitCommit=$VERSION_GIT_HASH" \
-v ./cmd/...
FROM alpine:3.11
RUN apk add --no-cache ca-certificates iptables iproute2

46
LICENSE
View File

@@ -1,27 +1,29 @@
Copyright (c) 2020 Tailscale & AUTHORS. All rights reserved.
BSD 3-Clause License
Copyright (c) 2020 Tailscale & AUTHORS.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
* Neither the name of Tailscale Inc. nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

View File

@@ -12,7 +12,13 @@ depaware:
go run github.com/tailscale/depaware --check tailscale.com/cmd/tailscaled
go run github.com/tailscale/depaware --check tailscale.com/cmd/tailscale
check: staticcheck vet depaware
buildwindows:
GOOS=windows GOARCH=amd64 go install tailscale.com/cmd/tailscale tailscale.com/cmd/tailscaled
build386:
GOOS=linux GOARCH=386 go install tailscale.com/cmd/tailscale tailscale.com/cmd/tailscaled
check: staticcheck vet depaware buildwindows build386
staticcheck:
go run honnef.co/go/tools/cmd/staticcheck -- $$(go list ./... | grep -v tempfork)

View File

@@ -43,7 +43,7 @@ If your distro has conventions that preclude the use of
distro's way, so that bug reports contain useful version information.
We only guarantee to support the latest Go release and any Go beta or
release candidate builds (currently Go 1.15) in module mode. It might
release candidate builds (currently Go 1.16) in module mode. It might
work in earlier Go versions or in GOPATH mode, but we're making no
effort to keep those working.
@@ -63,8 +63,13 @@ Origin](https://en.wikipedia.org/wiki/Developer_Certificate_of_Origin)
## About Us
We are apenwarr, bradfitz, crawshaw, danderson, dfcarney, josharian
from Tailscale Inc.
You can learn more about us from [our website](https://tailscale.com).
[Tailscale](https://tailscale.com/) is primarily developed by the
people at https://github.com/orgs/tailscale/people. For other contributors,
see:
* https://github.com/tailscale/tailscale/graphs/contributors
* https://github.com/tailscale/tailscale-android/graphs/contributors
## Legal
WireGuard is a registered trademark of Jason A. Donenfeld.

View File

@@ -1 +1 @@
1.3.0
1.7.0

270
api.md
View File

@@ -5,10 +5,39 @@ The Tailscale API is a (mostly) RESTful API. Typically, POST bodies should be JS
# Authentication
Currently based on {some authentication method}. Visit the [admin panel](https://api.tailscale.com/admin) and navigate to the `Keys` page. Generate an API Key and keep it safe. Provide the key as the user key in basic auth when making calls to Tailscale API endpoints.
# APIS
# APIs
* **[Devices](#device)**
- [GET device](#device-get)
- [DELETE device](#device-delete)
- Routes
- [GET device routes](#device-routes-get)
- [POST device routes](#device-routes-post)
* **[Tailnets](#tailnet)**
- ACLs
- [GET tailnet ACL](#tailnet-acl-get)
- [POST tailnet ACL](#tailnet-acl-post): set ACL for a tailnet
- [POST tailnet ACL preview](#tailnet-acl-preview-post): preview rule matches on an ACL for a resource
- [Devices](#tailnet-devices)
- [GET tailnet devices](#tailnet-devices-get)
- [DNS](#tailnet-dns)
- [GET tailnet DNS nameservers](#tailnet-dns-nameservers-get)
- [POST tailnet DNS nameservers](#tailnet-dns-nameservers-post)
- [GET tailnet DNS preferences](#tailnet-dns-preferences-get)
- [POST tailnet DNS preferences](#tailnet-dns-preferences-post)
- [GET tailnet DNS searchpaths](#tailnet-dns-searchpaths-get)
- [POST tailnet DNS searchpaths](#tailnet-dns-searchpaths-post)
## Device
<!-- TODO: description about what devices are -->
Each Tailscale-connected device has a globally-unique identifier number which we refer as the "deviceID" or sometimes, just "id".
You can use the deviceID to specify operations on a specific device, like retrieving its subnet routes.
To find the deviceID of a particular device, you can use the ["GET /devices"](#getdevices) API call and generate a list of devices on your network.
Find the device you're looking for and get the "id" field.
This is your deviceID.
<a name=device-get></div>
#### `GET /api/v2/device/:deviceid` - lists the details for a device
Returns the details for the specified device.
@@ -34,7 +63,7 @@ If the `fields` parameter is not provided, then the default option is used.
##### Example
```
GET /api/v2/device/12345
curl https://api.tailscale.com/api/v2/device/12345?fields=all \
curl 'https://api.tailscale.com/api/v2/device/12345?fields=all' \
-u "tskey-yourapikey123:"
```
@@ -97,6 +126,45 @@ Response
}
```
<a name=device-delete></div>
#### `DELETE /api/v2/device/:deviceID` - deletes the device from its tailnet
Deletes the provided device from its tailnet.
The device must belong to the user's tailnet.
Deleting shared/external devices is not supported.
Supply the device of interest in the path using its ID.
##### Parameters
No parameters.
##### Example
```
DELETE /api/v2/device/12345
curl -X DELETE 'https://api.tailscale.com/api/v2/device/12345' \
-u "tskey-yourapikey123:" -v
```
Response
If successful, the response should be empty:
```
< HTTP/1.1 200 OK
...
* Connection #0 to host left intact
* Closing connection 0
```
If the device is not owned by your tailnet:
```
< HTTP/1.1 501 Not Implemented
...
{"message":"cannot delete devices outside of your tailnet"}
```
<a name=device-routes-get></div>
#### `GET /api/v2/device/:deviceID/routes` - fetch subnet routes that are advertised and enabled for a device
Retrieves the list of subnet routes that a device is advertising, as well as those that are enabled for it. Enabled routes are not necessarily advertised (e.g. for pre-enabling), and likewise, advertised routes are not necessarily enabled.
@@ -108,7 +176,7 @@ No parameters.
##### Example
```
curl https://api.tailscale.com/api/v2/device/11055/routes \
curl 'https://api.tailscale.com/api/v2/device/11055/routes' \
-u "tskey-yourapikey123:"
```
@@ -124,6 +192,8 @@ Response
}
```
<a name=device-routes-post></div>
#### `POST /api/v2/device/:deviceID/routes` - set the subnet routes that are enabled for a device
Sets which subnet routes are enabled to be routed by a device by replacing the existing list of subnet routes with the supplied parameters. Routes can be enabled without a device advertising them (e.g. for preauth). Returns a list of enabled subnet routes and a list of advertised subnet routes for a device.
@@ -141,7 +211,7 @@ Sets which subnet routes are enabled to be routed by a device by replacing the e
##### Example
```
curl https://api.tailscale.com/api/v2/device/11055/routes \
curl 'https://api.tailscale.com/api/v2/device/11055/routes' \
-u "tskey-yourapikey123:" \
--data-binary '{"routes": ["10.0.1.0/24", "1.2.0.0/16", "2.0.0.0/24"]}'
```
@@ -163,17 +233,38 @@ Response
}
```
## Domain
<!---
TODO: ctrl+f domain, replace with {workgroup/tailnet/other}
Domain is a top level resource. ACL is an example of a resource that is tied to a top level domain.
--->
## Tailnet
A tailnet is the name of your Tailscale network.
You can find it in the top left corner of the [Admin Panel](https://login.tailscale.com/admin) beside the Tailscale logo.
`alice@example.com` belongs to the `example.com` tailnet and would use the following format for API calls:
```
GET /api/v2/tailnet/example.com/...
curl https://api.tailscale.com/api/v2/tailnet/example.com/...
```
For solo plans, the tailnet is the email you signed up with.
So `alice@gmail.com` has the tailnet `alice@gmail.com` since `@gmail.com` is a shared email host.
Her API calls would have the following format:
```
GET /api/v2/tailnet/alice@gmail.com/...
curl https://api.tailscale.com/api/v2/tailnet/alice@gmail.com/...
```
Tailnets are a top-level resource. ACL is an example of a resource that is tied to a top-level tailnet.
For more information on Tailscale networks/tailnets, click [here](https://tailscale.com/kb/1064/invite-team-members).
### ACL
#### `GET /api/v2/domain/:domain/acl` - fetch ACL for a domain
<a name=tailnet-acl-get></a>
Retrieves the ACL that is currently set for the given domain. Supply the domain of interest in the path. This endpoint can send back either the HuJSON of the ACL or a parsed JSON, depending on the `Accept` header.
#### `GET /api/v2/tailnet/:tailnet/acl` - fetch ACL for a tailnet
Retrieves the ACL that is currently set for the given tailnet. Supply the tailnet of interest in the path. This endpoint can send back either the HuJSON of the ACL or a parsed JSON, depending on the `Accept` header.
##### Parameters
@@ -188,8 +279,8 @@ Returns the ACL HuJSON by default. Returns a parsed JSON of the ACL (sans commen
###### Requesting a HuJSON response:
```
GET /api/v2/domain/example.com/acl
curl https://api.tailscale.com/api/v2/domain/example.com/acl \
GET /api/v2/tailnet/example.com/acl
curl 'https://api.tailscale.com/api/v2/tailnet/example.com/acl' \
-u "tskey-yourapikey123:" \
-H "Accept: application/hujson" \
-v
@@ -235,8 +326,8 @@ Etag: "e0b2816b418b3f266309d94426ac7668ab3c1fa87798785bf82f1085cc2f6d9c"
###### Requesting a JSON response:
```
GET /api/v2/domain/example.com/acl
curl https://api.tailscale.com/api/v2/domain/example.com/acl \
GET /api/v2/tailnet/example.com/acl
curl 'https://api.tailscale.com/api/v2/tailnet/example.com/acl' \
-u "tskey-yourapikey123:" \
-H "Accept: application/json" \
-v
@@ -272,12 +363,15 @@ Etag: "e0b2816b418b3f266309d94426ac7668ab3c1fa87798785bf82f1085cc2f6d9c"
}
```
#### `POST /api/v2/domain/:domain/acl` - set ACL for a domain
<a name=tailnet-acl-post></a>
Sets the ACL for the given domain. HuJSON and JSON are both accepted inputs. An `If-Match` header can be set to avoid missed updates.
#### `POST /api/v2/tailnet/:tailnet/acl` - set ACL for a tailnet
Returns error for invalid ACLs.
Returns error if using an `If-Match` header and the ETag does not match.
Sets the ACL for the given domain.
HuJSON and JSON are both accepted inputs.
An `If-Match` header can be set to avoid missed updates.
Returns the updated ACL in JSON or HuJSON according to the `Accept` header on success. Otherwise, errors are returned for incorrectly defined ACLs, ACLs with failing tests on attempted updates, and mismatched `If-Match` header and ETag.
##### Parameters
@@ -287,12 +381,22 @@ Returns error if using an `If-Match` header and the ETag does not match.
`Accept` - Sets the return type of the updated ACL. Response is parsed `JSON` if `application/json` is explicitly named, otherwise HuJSON will be returned.
###### POST Body
ACL JSON or HuJSON (see https://tailscale.com/kb/1018/acls)
The POST body should be a JSON or [HuJSON](https://github.com/tailscale/hujson#hujson---human-json) formatted JSON object.
An ACL policy may contain the following top-level properties:
* `Groups` - Static groups of users which can be used for ACL rules.
* `Hosts` - Hostname aliases to use in place of IP addresses or subnets.
* `ACLs` - Access control lists.
* `TagOwners` - Defines who is allowed to use which tags.
* `Tests` - Run on ACL updates to check correct functionality of defined ACLs.
See https://tailscale.com/kb/1018/acls for more information on those properties.
##### Example
```
POST /api/v2/domain/example.com/acl
curl https://api.tailscale.com/api/v2/domain/example.com/acl \
POST /api/v2/tailnet/example.com/acl
curl 'https://api.tailscale.com/api/v2/tailnet/example.com/acl' \
-u "tskey-yourapikey123:" \
-H "If-Match: \"e0b2816b418b3f266309d94426ac7668ab3c1fa87798785bf82f1085cc2f6d9c\""
--data-binary '// Example/default ACLs for unrestricted connections.
@@ -318,7 +422,7 @@ curl https://api.tailscale.com/api/v2/domain/example.com/acl \
}'
```
Response
Response:
```
// Example/default ACLs for unrestricted connections.
{
@@ -343,7 +447,25 @@ Response
}
```
#### `POST /api/v2/domain/:domain/acl/preview` - preview rule matches on an ACL for a resource
Failed test error response:
```
{
"message": "test(s) failed",
"data": [
{
"user": "user1@example.com",
"errors": [
"address \"user2@example.com:400\": want: Accept, got: Drop"
]
}
]
}
```
<a name=tailnet-acl-preview-post></a>
#### `POST /api/v2/tailnet/:tailnet/acl/preview` - preview rule matches on an ACL for a resource
Determines what rules match for a user on an ACL without saving the ACL to the server.
##### Parameters
@@ -356,8 +478,8 @@ ACL JSON or HuJSON (see https://tailscale.com/kb/1018/acls)
##### Example
```
POST /api/v2/domain/example.com/acl/preiew
curl https://api.tailscale.com/api/v2/domain/example.com/acl?user=user1@example.com \
POST /api/v2/tailnet/example.com/acl/preiew
curl 'https://api.tailscale.com/api/v2/tailnet/example.com/acl?user=user1@example.com' \
-u "tskey-yourapikey123:" \
--data-binary '// Example/default ACLs for unrestricted connections.
{
@@ -382,15 +504,20 @@ curl https://api.tailscale.com/api/v2/domain/example.com/acl?user=user1@example.
}'
```
Response
Response:
```
{"matches":[{"users":["*"],"ports":["*:*"],"lineNumber":19}],"user":"user1@example.com"}
```
<a name=tailnet-devices></a>
### Devices
#### `GET /api/v2/domain/:domain/devices` - list the devices for a domain
Lists the devices for a domain.
Supply the domain of interest in the path.
<a name=tailnet-devices-get></a>
#### <a name="getdevices"></a> `GET /api/v2/tailnet/:tailnet/devices` - list the devices for a tailnet
Lists the devices in a tailnet.
Supply the tailnet of interest in the path.
Use the `fields` query parameter to explicitly indicate which fields are returned.
@@ -413,8 +540,8 @@ If the `fields` parameter is not provided, then the default option is used.
##### Example
```
GET /api/v2/domain/example.com/devices
curl https://api.tailscale.com/api/v2/domain/example.com/devices \
GET /api/v2/tailnet/example.com/devices
curl 'https://api.tailscale.com/api/v2/tailnet/example.com/devices' \
-u "tskey-yourapikey123:"
```
@@ -468,12 +595,15 @@ Response
}
```
<a name=tailnet-dns></a>
### DNS
#### `GET /api/v2/domain/:domain/dns/nameservers` - list the DNS nameservers for a domain
Lists the DNS nameservers for a domain.
Supply the domain of interest in the path.
<a name=tailnet-dns-nameservers-get></a>
#### `GET /api/v2/tailnet/:tailnet/dns/nameservers` - list the DNS nameservers for a tailnet
Lists the DNS nameservers for a tailnet.
Supply the tailnet of interest in the path.
##### Parameters
No parameters.
@@ -481,8 +611,8 @@ No parameters.
##### Example
```
GET /api/v2/domain/example.com/dns/nameservers
curl https://api.tailscale.com/api/v2/domain/example.com/dns/nameservers \
GET /api/v2/tailnet/example.com/dns/nameservers
curl 'https://api.tailscale.com/api/v2/tailnet/example.com/dns/nameservers' \
-u "tskey-yourapikey123:"
```
@@ -493,9 +623,11 @@ Response
}
```
#### `POST /api/v2/domain/:domain/dns/nameservers` - replaces the list of DNS nameservers for a domain
Replaces the list of DNS nameservers for the given domain with the list supplied by the user.
Supply the domain of interest in the path.
<a name=tailnet-dns-nameservers-post></a>
#### `POST /api/v2/tailnet/:tailnet/dns/nameservers` - replaces the list of DNS nameservers for a tailnet
Replaces the list of DNS nameservers for the given tailnet with the list supplied by the user.
Supply the tailnet of interest in the path.
Note that changing the list of DNS nameservers may also affect the status of MagicDNS (if MagicDNS is on).
##### Parameters
@@ -515,8 +647,8 @@ If all nameservers have been removed, MagicDNS will be automatically disabled (u
##### Example
###### Adding DNS nameservers with the MagicDNS on:
```
POST /api/v2/domain/example.com/dns/nameservers
curl -X POST 'https://api.tailscale.com/api/v2/domain/example.com/dns/nameservers' \
POST /api/v2/tailnet/example.com/dns/nameservers
curl -X POST 'https://api.tailscale.com/api/v2/tailnet/example.com/dns/nameservers' \
-u "tskey-yourapikey123:" \
--data-binary '{"dns": ["8.8.8.8"]}'
```
@@ -531,8 +663,8 @@ Response:
###### Removing all DNS nameservers with the MagicDNS on:
```
POST /api/v2/domain/example.com/dns/nameservers
curl -X POST 'https://api.tailscale.com/api/v2/domain/example.com/dns/nameservers' \
POST /api/v2/tailnet/example.com/dns/nameservers
curl -X POST 'https://api.tailscale.com/api/v2/tailnet/example.com/dns/nameservers' \
-u "tskey-yourapikey123:" \
--data-binary '{"dns": []}'
```
@@ -545,17 +677,19 @@ Response:
}
```
#### `GET /api/v2/domain/:domain/dns/preferences` - retrieves the DNS preferences for a domain
Retrieves the DNS preferences that are currently set for the given domain.
Supply the domain of interest in the path.
<a name=tailnet-dns-preferences-get></a>
#### `GET /api/v2/tailnet/:tailnet/dns/preferences` - retrieves the DNS preferences for a tailnet
Retrieves the DNS preferences that are currently set for the given tailnet.
Supply the tailnet of interest in the path.
##### Parameters
No parameters.
##### Example
```
GET /api/v2/domain/example.com/dns/preferences
curl 'https://api.tailscale.com/api/v2/domain/example.com/dns/preferences' \
GET /api/v2/tailnet/example.com/dns/preferences
curl 'https://api.tailscale.com/api/v2/tailnet/example.com/dns/preferences' \
-u "tskey-yourapikey123:"
```
@@ -566,19 +700,21 @@ Response:
}
```
#### `POST /api/v2/domain/:domain/dns/preferences` - replaces the DNS preferences for a domain
Replaces the DNS preferences for a domain, specifically, the MagicDNS setting.
<a name=tailnet-dns-preferences-post></a>
#### `POST /api/v2/tailnet/:tailnet/dns/preferences` - replaces the DNS preferences for a tailnet
Replaces the DNS preferences for a tailnet, specifically, the MagicDNS setting.
Note that MagicDNS is dependent on DNS servers.
If there is at least one DNS server, then MagicDNS can be enabled.
Otherwise, it returns an error.
Note that removing all nameservers will turn off MagicDNS.
To reenable it, nameservers must be added back, and MagicDNS must be explicity turned on.
To reenable it, nameservers must be added back, and MagicDNS must be explicitly turned on.
##### Parameters
###### POST Body
The DNS preferences in JSON. Currently, MagicDNS is the only setting available.
`magicDNS` - Automatically registers DNS names for devices in your network.
`magicDNS` - Automatically registers DNS names for devices in your tailnet.
```
{
"magicDNS": true
@@ -587,8 +723,8 @@ The DNS preferences in JSON. Currently, MagicDNS is the only setting available.
##### Example
```
POST /api/v2/domain/example.com/dns/preferences
curl -X POST 'https://api.tailscale.com/api/v2/domain/example.com/dns/preferences' \
POST /api/v2/tailnet/example.com/dns/preferences
curl -X POST 'https://api.tailscale.com/api/v2/tailnet/example.com/dns/preferences' \
-u "tskey-yourapikey123:" \
--data-binary '{"magicDNS": true}'
```
@@ -610,9 +746,11 @@ If there are DNS servers:
}
```
#### `GET /api/v2/domain/:domain/dns/searchpaths` - retrieves the search paths for a domain
Retrieves the list of search paths that is currently set for the given domain.
Supply the domain of interest in the path.
<a name=tailnet-dns-searchpaths-get></a>
#### `GET /api/v2/tailnet/:tailnet/dns/searchpaths` - retrieves the search paths for a tailnet
Retrieves the list of search paths that is currently set for the given tailnet.
Supply the tailnet of interest in the path.
##### Parameters
@@ -620,8 +758,8 @@ No parameters.
##### Example
```
GET /api/v2/domain/example.com/dns/searchpaths
curl 'https://api.tailscale.com/api/v2/domain/example.com/dns/searchpaths' \
GET /api/v2/tailnet/example.com/dns/searchpaths
curl 'https://api.tailscale.com/api/v2/tailnet/example.com/dns/searchpaths' \
-u "tskey-yourapikey123:"
```
@@ -632,13 +770,15 @@ Response:
}
```
#### `POST /api/v2/domain/:domain/dns/searchpaths` - replaces the search paths for a domain
Replaces the list of search paths with the list supplied by the user and returns an error otherwise.
<a name=tailnet-dns-searchpaths-post></a>
#### `POST /api/v2/tailnet/:tailnet/dns/searchpaths` - replaces the search paths for a tailnet
Replaces the list of searchpaths with the list supplied by the user and returns an error otherwise.
##### Parameters
###### POST Body
`searchPaths` - A list of searchpaths in JSON format.
`searchPaths` - A list of searchpaths in JSON.
```
{
"searchPaths: ["user1.example.com", "user2.example.com"]
@@ -647,8 +787,8 @@ Replaces the list of search paths with the list supplied by the user and returns
##### Example
```
POST /api/v2/domain/example.com/dns/searchpaths
curl -X POST 'https://api.tailscale.com/api/v2/domain/example.com/dns/searchpaths' \
POST /api/v2/tailnet/example.com/dns/searchpaths
curl -X POST 'https://api.tailscale.com/api/v2/tailnet/example.com/dns/searchpaths' \
-u "tskey-yourapikey123:" \
--data-binary '{"searchPaths": ["user1.example.com", "user2.example.com"]}'
```

34
build_docker.sh Executable file
View File

@@ -0,0 +1,34 @@
#!/usr/bin/env sh
#
# Runs `go build` with flags configured for docker distribution. All
# it does differently from `go build` is burn git commit and version
# information into the binaries inside docker, so that we can track down user
# issues.
#
############################################################################
#
# WARNING: Tailscale is not yet officially supported in Docker,
# Kubernetes, etc.
#
# It might work, but we don't regularly test it, and it's not as polished as
# our currently supported platforms. This is provided for people who know
# how Tailscale works and what they're doing.
#
# Our tracking bug for officially support container use cases is:
# https://github.com/tailscale/tailscale/issues/504
#
# Also, see the various bugs tagged "containers":
# https://github.com/tailscale/tailscale/labels/containers
#
############################################################################
set -eu
eval $(./version/version.sh)
docker build \
--build-arg VERSION_LONG=$VERSION_LONG \
--build-arg VERSION_SHORT=$VERSION_SHORT \
--build-arg VERSION_GIT_HASH=$VERSION_GIT_HASH \
-t tailscale:tailscale .

View File

@@ -0,0 +1,29 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Package apitype contains types for the Tailscale local API.
package apitype
import "tailscale.com/tailcfg"
// WhoIsResponse is the JSON type returned by tailscaled debug server's /whois?ip=$IP handler.
type WhoIsResponse struct {
Node *tailcfg.Node
UserProfile *tailcfg.UserProfile
}
// FileTarget is a node to which files can be sent, and the PeerAPI
// URL base to do so via.
type FileTarget struct {
Node *tailcfg.Node
// PeerAPI is the http://ip:port URL base of the node's peer API,
// without any path (not even a single slash).
PeerAPIURL string
}
type WaitingFile struct {
Name string
Size int64
}

View File

@@ -0,0 +1,258 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Package tailscale contains Tailscale client code.
package tailscale
import (
"bytes"
"context"
"encoding/json"
"errors"
"fmt"
"io"
"io/ioutil"
"net"
"net/http"
"net/url"
"strconv"
"strings"
"tailscale.com/client/tailscale/apitype"
"tailscale.com/ipn"
"tailscale.com/ipn/ipnstate"
"tailscale.com/paths"
"tailscale.com/safesocket"
)
// TailscaledSocket is the tailscaled Unix socket.
var TailscaledSocket = paths.DefaultTailscaledSocket()
// tsClient does HTTP requests to the local Tailscale daemon.
var tsClient = &http.Client{
Transport: &http.Transport{
DialContext: func(ctx context.Context, network, addr string) (net.Conn, error) {
if addr != "local-tailscaled.sock:80" {
return nil, fmt.Errorf("unexpected URL address %q", addr)
}
if TailscaledSocket == paths.DefaultTailscaledSocket() {
// On macOS, when dialing from non-sandboxed program to sandboxed GUI running
// a TCP server on a random port, find the random port. For HTTP connections,
// we don't send the token. It gets added in an HTTP Basic-Auth header.
if port, _, err := safesocket.LocalTCPPortAndToken(); err == nil {
var d net.Dialer
return d.DialContext(ctx, "tcp", "localhost:"+strconv.Itoa(port))
}
}
return safesocket.Connect(TailscaledSocket, 41112)
},
},
}
// DoLocalRequest makes an HTTP request to the local machine's Tailscale daemon.
//
// URLs are of the form http://local-tailscaled.sock/localapi/v0/whois?ip=1.2.3.4.
//
// The hostname must be "local-tailscaled.sock", even though it
// doesn't actually do any DNS lookup. The actual means of connecting to and
// authenticating to the local Tailscale daemon vary by platform.
//
// DoLocalRequest may mutate the request to add Authorization headers.
func DoLocalRequest(req *http.Request) (*http.Response, error) {
if _, token, err := safesocket.LocalTCPPortAndToken(); err == nil {
req.SetBasicAuth("", token)
}
return tsClient.Do(req)
}
type errorJSON struct {
Error string
}
// bestError returns either err, or if body contains a valid JSON
// object of type errorJSON, its non-empty error body.
func bestError(err error, body []byte) error {
var j errorJSON
if err := json.Unmarshal(body, &j); err == nil && j.Error != "" {
return errors.New(j.Error)
}
return err
}
func send(ctx context.Context, method, path string, wantStatus int, body io.Reader) ([]byte, error) {
req, err := http.NewRequestWithContext(ctx, method, "http://local-tailscaled.sock"+path, body)
if err != nil {
return nil, err
}
res, err := DoLocalRequest(req)
if err != nil {
return nil, err
}
defer res.Body.Close()
slurp, err := ioutil.ReadAll(res.Body)
if err != nil {
return nil, err
}
if res.StatusCode != wantStatus {
err := fmt.Errorf("HTTP %s: %s (expected %v)", res.Status, slurp, wantStatus)
return nil, bestError(err, slurp)
}
return slurp, nil
}
func get200(ctx context.Context, path string) ([]byte, error) {
return send(ctx, "GET", path, 200, nil)
}
// WhoIs returns the owner of the remoteAddr, which must be an IP or IP:port.
func WhoIs(ctx context.Context, remoteAddr string) (*apitype.WhoIsResponse, error) {
body, err := get200(ctx, "/localapi/v0/whois?addr="+url.QueryEscape(remoteAddr))
if err != nil {
return nil, err
}
r := new(apitype.WhoIsResponse)
if err := json.Unmarshal(body, r); err != nil {
if max := 200; len(body) > max {
body = append(body[:max], "..."...)
}
return nil, fmt.Errorf("failed to parse JSON WhoIsResponse from %q", body)
}
return r, nil
}
// Goroutines returns a dump of the Tailscale daemon's current goroutines.
func Goroutines(ctx context.Context) ([]byte, error) {
return get200(ctx, "/localapi/v0/goroutines")
}
// BugReport logs and returns a log marker that can be shared by the user with support.
func BugReport(ctx context.Context, note string) (string, error) {
body, err := send(ctx, "POST", "/localapi/v0/bugreport?note="+url.QueryEscape(note), 200, nil)
if err != nil {
return "", err
}
return strings.TrimSpace(string(body)), nil
}
// Status returns the Tailscale daemon's status.
func Status(ctx context.Context) (*ipnstate.Status, error) {
return status(ctx, "")
}
// StatusWithPeers returns the Tailscale daemon's status, without the peer info.
func StatusWithoutPeers(ctx context.Context) (*ipnstate.Status, error) {
return status(ctx, "?peers=false")
}
func status(ctx context.Context, queryString string) (*ipnstate.Status, error) {
body, err := get200(ctx, "/localapi/v0/status"+queryString)
if err != nil {
return nil, err
}
st := new(ipnstate.Status)
if err := json.Unmarshal(body, st); err != nil {
return nil, err
}
return st, nil
}
func WaitingFiles(ctx context.Context) ([]apitype.WaitingFile, error) {
body, err := get200(ctx, "/localapi/v0/files/")
if err != nil {
return nil, err
}
var wfs []apitype.WaitingFile
if err := json.Unmarshal(body, &wfs); err != nil {
return nil, err
}
return wfs, nil
}
func DeleteWaitingFile(ctx context.Context, baseName string) error {
_, err := send(ctx, "DELETE", "/localapi/v0/files/"+url.PathEscape(baseName), http.StatusNoContent, nil)
return err
}
func GetWaitingFile(ctx context.Context, baseName string) (rc io.ReadCloser, size int64, err error) {
req, err := http.NewRequestWithContext(ctx, "GET", "http://local-tailscaled.sock/localapi/v0/files/"+url.PathEscape(baseName), nil)
if err != nil {
return nil, 0, err
}
res, err := DoLocalRequest(req)
if err != nil {
return nil, 0, err
}
if res.ContentLength == -1 {
res.Body.Close()
return nil, 0, fmt.Errorf("unexpected chunking")
}
if res.StatusCode != 200 {
body, _ := ioutil.ReadAll(res.Body)
res.Body.Close()
return nil, 0, fmt.Errorf("HTTP %s: %s", res.Status, body)
}
return res.Body, res.ContentLength, nil
}
func FileTargets(ctx context.Context) ([]apitype.FileTarget, error) {
body, err := get200(ctx, "/localapi/v0/file-targets")
if err != nil {
return nil, err
}
var fts []apitype.FileTarget
if err := json.Unmarshal(body, &fts); err != nil {
return nil, fmt.Errorf("invalid JSON: %w", err)
}
return fts, nil
}
func CheckIPForwarding(ctx context.Context) error {
body, err := get200(ctx, "/localapi/v0/check-ip-forwarding")
if err != nil {
return err
}
var jres struct {
Warning string
}
if err := json.Unmarshal(body, &jres); err != nil {
return fmt.Errorf("invalid JSON from check-ip-forwarding: %w", err)
}
if jres.Warning != "" {
return errors.New(jres.Warning)
}
return nil
}
func GetPrefs(ctx context.Context) (*ipn.Prefs, error) {
body, err := get200(ctx, "/localapi/v0/prefs")
if err != nil {
return nil, err
}
var p ipn.Prefs
if err := json.Unmarshal(body, &p); err != nil {
return nil, fmt.Errorf("invalid prefs JSON: %w", err)
}
return &p, nil
}
func EditPrefs(ctx context.Context, mp *ipn.MaskedPrefs) (*ipn.Prefs, error) {
mpj, err := json.Marshal(mp)
if err != nil {
return nil, err
}
body, err := send(ctx, "PATCH", "/localapi/v0/prefs", http.StatusOK, bytes.NewReader(mpj))
if err != nil {
return nil, err
}
var p ipn.Prefs
if err := json.Unmarshal(body, &p); err != nil {
return nil, fmt.Errorf("invalid prefs JSON: %w", err)
}
return &p, nil
}
func Logout(ctx context.Context) error {
_, err := send(ctx, "POST", "/localapi/v0/logout", http.StatusNoContent, nil)
return err
}

View File

@@ -140,7 +140,7 @@ func main() {
flag.Usage()
os.Exit(2)
}
if err := ioutil.WriteFile(output, out, 0666); err != nil {
if err := ioutil.WriteFile(output, out, 0644); err != nil {
log.Fatal(err)
}
}

View File

@@ -0,0 +1,69 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package main
import (
"context"
"encoding/json"
"expvar"
"log"
"net"
"net/http"
"strings"
"sync"
"time"
)
var (
dnsMu sync.Mutex
dnsCache = map[string][]net.IP{}
)
var bootstrapDNSRequests = expvar.NewInt("counter_bootstrap_dns_requests")
func refreshBootstrapDNSLoop() {
if *bootstrapDNS == "" {
return
}
for {
refreshBootstrapDNS()
time.Sleep(10 * time.Minute)
}
}
func refreshBootstrapDNS() {
if *bootstrapDNS == "" {
return
}
ctx, cancel := context.WithTimeout(context.Background(), time.Minute)
defer cancel()
names := strings.Split(*bootstrapDNS, ",")
var r net.Resolver
for _, name := range names {
addrs, err := r.LookupIP(ctx, "ip", name)
if err != nil {
log.Printf("bootstrap DNS lookup %q: %v", name, err)
continue
}
dnsMu.Lock()
dnsCache[name] = addrs
dnsMu.Unlock()
}
}
func handleBootstrapDNS(w http.ResponseWriter, r *http.Request) {
bootstrapDNSRequests.Add(1)
dnsMu.Lock()
j, err := json.MarshalIndent(dnsCache, "", "\t")
dnsMu.Unlock()
if err != nil {
log.Printf("bootstrap DNS JSON: %v", err)
http.Error(w, "JSON marshal error", 500)
return
}
w.Header().Set("Content-Type", "application/json")
w.Write(j)
}

View File

@@ -48,6 +48,7 @@ var (
runSTUN = flag.Bool("stun", false, "also run a STUN server")
meshPSKFile = flag.String("mesh-psk-file", defaultMeshPSKFile(), "if non-empty, path to file containing the mesh pre-shared key file. It should contain some hex string; whitespace is trimmed.")
meshWith = flag.String("mesh-with", "", "optional comma-separated list of hostnames to mesh with; the server's own hostname can be in the list")
bootstrapDNS = flag.String("bootstrap-dns-names", "", "optional comma-separated list of hostnames to make available at /bootstrap-dns")
)
type config struct {
@@ -97,7 +98,7 @@ func writeNewConfig() config {
if err != nil {
log.Fatal(err)
}
if err := atomicfile.WriteFile(*configPath, b, 0666); err != nil {
if err := atomicfile.WriteFile(*configPath, b, 0600); err != nil {
log.Fatal(err)
}
return cfg
@@ -145,6 +146,8 @@ func main() {
// Create our own mux so we don't expose /debug/ stuff to the world.
mux := tsweb.NewMux(debugHandler(s))
mux.Handle("/derp", derphttp.Handler(s))
go refreshBootstrapDNSLoop()
mux.HandleFunc("/bootstrap-dns", handleBootstrapDNS)
mux.Handle("/", http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
w.Header().Set("Content-Type", "text/html; charset=utf-8")
w.WriteHeader(200)
@@ -153,7 +156,7 @@ func main() {
<p>
This is a
<a href="https://tailscale.com/">Tailscale</a>
<a href="https://godoc.org/tailscale.com/derp">DERP</a>
<a href="https://pkg.go.dev/tailscale.com/derp">DERP</a>
server.
</p>
`)

View File

@@ -5,6 +5,7 @@
package main
import (
"context"
"errors"
"fmt"
"log"
@@ -40,6 +41,6 @@ func startMeshWithHost(s *derp.Server, host string) error {
c.MeshKey = s.MeshKey()
add := func(k key.Public) { s.AddPacketForwarder(k, c) }
remove := func(k key.Public) { s.RemovePacketForwarder(k, c) }
go c.RunWatchConnectionLoop(s.PublicKey(), add, remove)
go c.RunWatchConnectionLoop(context.Background(), s.PublicKey(), logf, add, remove)
return nil
}

185
cmd/hello/hello.go Normal file
View File

@@ -0,0 +1,185 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// The hello binary runs hello.ipn.dev.
package main // import "tailscale.com/cmd/hello"
import (
"context"
_ "embed"
"encoding/json"
"flag"
"html/template"
"io/ioutil"
"log"
"net/http"
"os"
"strings"
"tailscale.com/client/tailscale"
"tailscale.com/client/tailscale/apitype"
)
var (
httpAddr = flag.String("http", ":80", "address to run an HTTP server on, or empty for none")
httpsAddr = flag.String("https", ":443", "address to run an HTTPS server on, or empty for none")
testIP = flag.String("test-ip", "", "if non-empty, look up IP and exit before running a server")
)
//go:embed hello.tmpl.html
var embeddedTemplate string
func main() {
flag.Parse()
if *testIP != "" {
res, err := tailscale.WhoIs(context.Background(), *testIP)
if err != nil {
log.Fatal(err)
}
e := json.NewEncoder(os.Stdout)
e.SetIndent("", "\t")
e.Encode(res)
return
}
if devMode() {
// Parse it optimistically
var err error
tmpl, err = template.New("home").Parse(embeddedTemplate)
if err != nil {
log.Printf("ignoring template error in dev mode: %v", err)
}
} else {
if embeddedTemplate == "" {
log.Fatalf("embeddedTemplate is empty; must be build with Go 1.16+")
}
tmpl = template.Must(template.New("home").Parse(embeddedTemplate))
}
http.HandleFunc("/", root)
log.Printf("Starting hello server.")
errc := make(chan error, 1)
if *httpAddr != "" {
log.Printf("running HTTP server on %s", *httpAddr)
go func() {
errc <- http.ListenAndServe(*httpAddr, nil)
}()
}
if *httpsAddr != "" {
log.Printf("running HTTPS server on %s", *httpsAddr)
go func() {
errc <- http.ListenAndServeTLS(*httpsAddr,
"/etc/hello/hello.ipn.dev.crt",
"/etc/hello/hello.ipn.dev.key",
nil,
)
}()
}
log.Fatal(<-errc)
}
func devMode() bool { return *httpsAddr == "" && *httpAddr != "" }
func getTmpl() (*template.Template, error) {
if devMode() {
tmplData, err := ioutil.ReadFile("hello.tmpl.html")
if os.IsNotExist(err) {
log.Printf("using baked-in template in dev mode; can't find hello.tmpl.html in current directory")
return tmpl, nil
}
return template.New("home").Parse(string(tmplData))
}
return tmpl, nil
}
// tmpl is the template used in prod mode.
// In dev mode it's only used if the template file doesn't exist on disk.
// It's initialized by main after flag parsing.
var tmpl *template.Template
type tmplData struct {
DisplayName string // "Foo Barberson"
LoginName string // "foo@bar.com"
ProfilePicURL string // "https://..."
MachineName string // "imac5k"
MachineOS string // "Linux"
IP string // "100.2.3.4"
}
func tailscaleIP(who *apitype.WhoIsResponse) string {
if who == nil {
return ""
}
for _, nodeIP := range who.Node.Addresses {
if nodeIP.IP.Is4() && nodeIP.IsSingleIP() {
return nodeIP.IP.String()
}
}
for _, nodeIP := range who.Node.Addresses {
if nodeIP.IsSingleIP() {
return nodeIP.IP.String()
}
}
return ""
}
func root(w http.ResponseWriter, r *http.Request) {
if r.TLS == nil && *httpsAddr != "" {
host := r.Host
if strings.Contains(r.Host, "100.101.102.103") {
host = "hello.ipn.dev"
}
http.Redirect(w, r, "https://"+host, http.StatusFound)
return
}
if r.RequestURI != "/" {
http.Redirect(w, r, "/", http.StatusFound)
return
}
tmpl, err := getTmpl()
if err != nil {
w.Header().Set("Content-Type", "text/plain")
http.Error(w, "template error: "+err.Error(), 500)
return
}
who, err := tailscale.WhoIs(r.Context(), r.RemoteAddr)
var data tmplData
if err != nil {
if devMode() {
log.Printf("warning: using fake data in dev mode due to whois lookup error: %v", err)
data = tmplData{
DisplayName: "Taily Scalerson",
LoginName: "taily@scaler.son",
ProfilePicURL: "https://placekitten.com/200/200",
MachineName: "scaled",
MachineOS: "Linux",
IP: "100.1.2.3",
}
} else {
log.Printf("whois(%q) error: %v", r.RemoteAddr, err)
http.Error(w, "Your Tailscale works, but we failed to look you up.", 500)
return
}
} else {
data = tmplData{
DisplayName: who.UserProfile.DisplayName,
LoginName: who.UserProfile.LoginName,
ProfilePicURL: who.UserProfile.ProfilePicURL,
MachineName: firstLabel(who.Node.ComputedName),
MachineOS: who.Node.Hostinfo.OS,
IP: tailscaleIP(who),
}
}
w.Header().Set("Content-Type", "text/html; charset=utf-8")
tmpl.Execute(w, data)
}
// firstLabel s up until the first period, if any.
func firstLabel(s string) string {
if i := strings.Index(s, "."); i != -1 {
return s[:i]
}
return s
}

436
cmd/hello/hello.tmpl.html Normal file
View File

@@ -0,0 +1,436 @@
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1.0, minimum-scale=1.0">
<title>Hello from Tailscale</title>
<style>
html,
body {
margin: 0;
padding: 0;
}
body {
font-family: Inter, -apple-system, BlinkMacSystemFont, "Segoe UI", Roboto, Helvetica, Arial, sans-serif;
font-size: 100%;
-webkit-font-smoothing: antialiased;
-moz-osx-font-smoothing: grayscale;
}
html,
body,
main {
height: 100%;
}
*,
::before,
::after {
box-sizing: border-box;
border-width: 0;
border-style: solid;
border-color: #dad6d5;
}
h1,
h2,
h3,
h4,
h5,
h6 {
margin: 0;
font-size: 1rem;
font-weight: inherit;
}
a {
color: inherit;
}
p {
margin: 0;
}
main {
display: flex;
flex-direction: column;
justify-content: center;
align-items: center;
max-width: 24rem;
width: 95%;
margin-left: auto;
margin-right: auto;
}
.p-2 {
padding: 0.5rem;
}
.p-4 {
padding: 1rem;
}
.px-2 {
padding-left: 0.5rem;
padding-right: 0.5rem;
}
.pl-3 {
padding-left: 0.75rem;
}
.pr-3 {
padding-right: 0.75rem;
}
.pt-4 {
padding-top: 1rem;
}
.mr-2 {
margin-right: 0.5rem;
;
}
.mb-1 {
margin-bottom: 0.25rem;
}
.mb-2 {
margin-bottom: 0.5rem;
}
.mb-4 {
margin-bottom: 1rem;
}
.mb-6 {
margin-bottom: 1.5rem;
}
.mb-8 {
margin-bottom: 2rem;
}
.mb-12 {
margin-bottom: 3rem;
}
.width-full {
width: 100%;
}
.min-width-0 {
min-width: 0;
}
.rounded-lg {
border-radius: 0.5rem;
}
.relative {
position: relative;
}
.flex {
display: flex;
}
.justify-between {
justify-content: space-between;
}
.items-center {
align-items: center;
}
.border {
border-width: 1px;
}
.border-t-1 {
border-top-width: 1px;
}
.border-gray-100 {
border-color: #f7f5f4;
}
.border-gray-200 {
border-color: #eeebea;
}
.border-gray-300 {
border-color: #dad6d5;
}
.bg-white {
background-color: white;
}
.bg-gray-0 {
background-color: #faf9f8;
}
.bg-gray-100 {
background-color: #f7f5f4;
}
.text-green-600 {
color: #0d4b3b;
}
.text-blue-600 {
color: #3f5db3;
}
.hover\:text-blue-800:hover {
color: #253570;
}
.text-gray-600 {
color: #444342;
}
.text-gray-700 {
color: #2e2d2d;
}
.text-gray-800 {
color: #232222;
}
.text-center {
text-align: center;
}
.text-sm {
font-size: 0.875rem;
}
.font-title {
font-size: 1.25rem;
letter-spacing: -0.025em;
}
.font-semibold {
font-weight: 600;
}
.font-medium {
font-weight: 500;
}
.font-regular {
font-weight: 400;
}
.truncate {
overflow: hidden;
text-overflow: ellipsis;
white-space: nowrap;
}
.overflow-hidden {
overflow: hidden;
}
.profile-pic {
width: 2.5rem;
height: 2.5rem;
border-radius: 9999px;
background-size: cover;
margin-right: 0.5rem;
flex-shrink: 0;
}
.panel {
box-shadow: 0 20px 25px -5px rgba(0, 0, 0, 0.1), 0 10px 10px -5px rgba(0, 0, 0, 0.04);
}
.animate .panel {
transform: translateY(10%);
box-shadow: 0 20px 25px -5px rgba(0, 0, 0, 0.0), 0 10px 10px -5px rgba(0, 0, 0, 0.0);
transition: transform 1200ms ease, opacity 1200ms ease, box-shadow 1200ms ease;
}
.animate .panel-interior {
opacity: 0.0;
transition: opacity 1200ms ease;
}
.animate .logo {
transform: translateY(2rem);
opacity: 0.0;
transition: transform 1200ms ease, opacity 1200ms ease;
}
.animate .header-title {
transform: translateY(1.6rem);
opacity: 0.0;
transition: transform 1200ms ease, opacity 1200ms ease;
}
.animate .header-text {
transform: translateY(1.2rem);
opacity: 0.0;
transition: transform 1200ms ease, opacity 1200ms ease;
}
.animate .footer {
transform: translateY(-0.5rem);
opacity: 0.0;
transition: transform 1200ms ease, opacity 1200ms ease;
}
.animating .panel {
transform: translateY(0);
opacity: 1.0;
box-shadow: 0 20px 25px -5px rgba(0, 0, 0, 0.1), 0 10px 10px -5px rgba(0, 0, 0, 0.04);
}
.animating .panel-interior {
opacity: 1.0;
}
.animating .spinner {
opacity: 0.0;
}
.animating .logo,
.animating .header-title,
.animating .header-text,
.animating .footer {
transform: translateY(0);
opacity: 1.0;
}
.spinner {
display: inline-flex;
position: absolute;
top: 50%;
left: 50%;
transform: translate(-50%, -50%);
align-items: center;
transition: opacity 200ms ease;
}
.spinner span {
display: inline-block;
background-color: currentColor;
border-radius: 9999px;
animation-name: loading-dots-blink;
animation-duration: 1.4s;
animation-iteration-count: infinite;
animation-fill-mode: both;
width: 0.35em;
height: 0.35em;
margin: 0 0.15em;
}
.spinner span:nth-child(2) {
animation-delay: 200ms;
}
.spinner span:nth-child(3) {
animation-delay: 400ms;
}
.spinner {
display: none;
}
.animate .spinner {
display: inline-flex;
}
@keyframes loading-dots-blink {
0% {
opacity: 0.2;
}
20% {
opacity: 1;
}
100% {
opacity: 0.2;
}
}
@media (prefers-reduced-motion) {
* {
animation-duration: 0ms !important;
transition-duration: 0ms !important;
transition-delay: 0ms !important;
}
}
</style>
</head>
<body class="bg-gray-100">
<script>
(function() {
var lastSeen = localStorage.getItem("lastSeen");
if (!lastSeen) {
document.body.classList.add("animate");
window.addEventListener("load", function () {
setTimeout(function () {
document.body.classList.add("animating");
localStorage.setItem("lastSeen", Date.now());
}, 100);
});
}
})();
</script>
<main class="text-gray-800">
<svg class="logo mb-6" width="28" height="28" viewBox="0 0 22 22" fill="none" xmlns="http://www.w3.org/2000/svg">
<circle opacity="0.2" cx="3.4" cy="3.25" r="2.7" fill="currentColor" />
<circle cx="3.4" cy="11.3" r="2.7" fill="currentColor" />
<circle opacity="0.2" cx="3.4" cy="19.5" r="2.7" fill="currentColor" />
<circle cx="11.5" cy="11.3" r="2.7" fill="currentColor" />
<circle cx="11.5" cy="19.5" r="2.7" fill="currentColor" />
<circle opacity="0.2" cx="11.5" cy="3.25" r="2.7" fill="currentColor" />
<circle opacity="0.2" cx="19.5" cy="3.25" r="2.7" fill="currentColor" />
<circle cx="19.5" cy="11.3" r="2.7" fill="currentColor" />
<circle opacity="0.2" cx="19.5" cy="19.5" r="2.7" fill="currentColor" />
</svg>
<header class="mb-8 text-center">
<h1 class="header-title font-title font-semibold mb-2">You're connected over Tailscale!</h1>
<p class="header-text">This device is signed in as…</p>
</header>
<div class="panel relative bg-white rounded-lg width-full shadow-xl mb-8 p-4">
<div class="spinner text-gray-600">
<span></span>
<span></span>
<span></span>
</div>
<div class="panel-interior flex items-center width-full min-width-0 p-2 mb-4">
<div class="profile-pic bg-gray-100" style="background-image: url({{.ProfilePicURL}});"></div>
<div class="overflow-hidden">
{{ with .DisplayName }}
<h4 class="font-semibold truncate">{{.}}</h4>
{{ end }}
<h5 class="text-gray-600 truncate">{{.LoginName}}</h5>
</div>
</div>
<div
class="panel-interior border border-gray-200 bg-gray-0 rounded-lg p-2 pl-3 pr-3 mb-2 width-full flex justify-between items-center">
<div class="flex items-center min-width-0">
<svg class="text-gray-600 mr-2" xmlns="http://www.w3.org/2000/svg" width="18" height="18" viewBox="0 0 24 24" fill="none"
stroke="currentColor" stroke-width="2" stroke-linecap="round" stroke-linejoin="round">
<rect x="2" y="2" width="20" height="8" rx="2" ry="2"></rect>
<rect x="2" y="14" width="20" height="8" rx="2" ry="2"></rect>
<line x1="6" y1="6" x2="6.01" y2="6"></line>
<line x1="6" y1="18" x2="6.01" y2="18"></line>
</svg>
<h4 class="font-semibold truncate mr-2">{{.MachineName}}</h4>
</div>
<h5>{{.IP}}</h5>
</div>
</div>
<footer class="footer text-gray-600 text-center mb-12">
<p>Read about <a href="https://tailscale.com/kb/1017/install#advanced-features" class="text-blue-600 hover:text-blue-800"
target="_blank">what you can do next &rarr;</a></p>
</footer>
</main>
</body>
</html>

View File

@@ -0,0 +1,38 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package cli
import (
"context"
"errors"
"fmt"
"github.com/peterbourgon/ff/v2/ffcli"
"tailscale.com/client/tailscale"
)
var bugReportCmd = &ffcli.Command{
Name: "bugreport",
Exec: runBugReport,
ShortHelp: "Print a shareable identifier to help diagnose issues",
ShortUsage: "bugreport [note]",
}
func runBugReport(ctx context.Context, args []string) error {
var note string
switch len(args) {
case 0:
case 1:
note = args[0]
default:
return errors.New("unknown argumets")
}
logMarker, err := tailscale.BugReport(ctx, note)
if err != nil {
return err
}
fmt.Println(logMarker)
return nil
}

View File

@@ -9,33 +9,60 @@ package cli
import (
"context"
"flag"
"fmt"
"log"
"net"
"os"
"os/signal"
"runtime"
"strconv"
"strings"
"syscall"
"text/tabwriter"
"github.com/peterbourgon/ff/v2/ffcli"
"tailscale.com/client/tailscale"
"tailscale.com/ipn"
"tailscale.com/paths"
"tailscale.com/safesocket"
"tailscale.com/syncs"
)
// ActLikeCLI reports whether a GUI application should act like the
// CLI based on os.Args, GOOS, the context the process is running in
// (pty, parent PID), etc.
func ActLikeCLI() bool {
if len(os.Args) < 2 {
// This function is only used on macOS.
if runtime.GOOS != "darwin" {
return false
}
switch os.Args[1] {
case "up", "down", "status", "netcheck", "ping", "version",
"debug",
"-V", "--version", "-h", "--help":
// Escape hatch to let people force running the macOS
// GUI Tailscale binary as the CLI.
if v, _ := strconv.ParseBool(os.Getenv("TAILSCALE_BE_CLI")); v {
return true
}
// If our parent is launchd, we're definitely not
// being run as a CLI.
if os.Getppid() == 1 {
return false
}
// Looking at the environment of the GUI Tailscale app (ps eww
// $PID), empirically none of these environment variables are
// present. But all or some of these should be present with
// Terminal.all and bash or zsh.
for _, e := range []string{
"SHLVL",
"TERM",
"TERM_PROGRAM",
"PS1",
} {
if os.Getenv(e) != "" {
return true
}
}
return false
}
@@ -50,22 +77,33 @@ func Run(args []string) error {
rootCmd := &ffcli.Command{
Name: "tailscale",
ShortUsage: "tailscale subcommand [flags]",
ShortUsage: "tailscale [flags] <subcommand> [command flags]",
ShortHelp: "The easiest, most secure way to use WireGuard.",
LongHelp: strings.TrimSpace(`
For help on subcommands, add --help after: "tailscale status --help".
This CLI is still under active development. Commands and flags will
change in the future.
`),
Subcommands: []*ffcli.Command{
upCmd,
downCmd,
logoutCmd,
netcheckCmd,
ipCmd,
statusCmd,
pingCmd,
versionCmd,
webCmd,
pushCmd,
bugReportCmd,
},
FlagSet: rootfs,
Exec: func(context.Context, []string) error { return flag.ErrHelp },
FlagSet: rootfs,
Exec: func(context.Context, []string) error { return flag.ErrHelp },
UsageFunc: usageFunc,
}
for _, c := range rootCmd.Subcommands {
c.UsageFunc = usageFunc
}
// Don't advertise the debug command, but it exists.
@@ -77,6 +115,8 @@ change in the future.
return err
}
tailscale.TailscaledSocket = rootArgs.socket
err := rootCmd.Run(context.Background())
if err == flag.ErrHelp {
return nil
@@ -93,6 +133,8 @@ var rootArgs struct {
socket string
}
var gotSignal syncs.AtomicBool
func connect(ctx context.Context) (net.Conn, *ipn.BackendClient, context.Context, context.CancelFunc) {
c, err := safesocket.Connect(rootArgs.socket, 41112)
if err != nil {
@@ -110,7 +152,14 @@ func connect(ctx context.Context) (net.Conn, *ipn.BackendClient, context.Context
go func() {
interrupt := make(chan os.Signal, 1)
signal.Notify(interrupt, syscall.SIGINT, syscall.SIGTERM)
<-interrupt
select {
case <-interrupt:
case <-ctx.Done():
// Context canceled elsewhere.
signal.Reset(syscall.SIGINT, syscall.SIGTERM)
return
}
gotSignal.Set(true)
c.Close()
cancel()
}()
@@ -128,7 +177,9 @@ func pump(ctx context.Context, bc *ipn.BackendClient, conn net.Conn) {
if ctx.Err() != nil {
return
}
log.Printf("ReadMsg: %v\n", err)
if !gotSignal.Get() {
log.Printf("ReadMsg: %v\n", err)
}
break
}
bc.GotNotifyMsg(msg)
@@ -143,3 +194,72 @@ func strSliceContains(ss []string, s string) bool {
}
return false
}
func usageFunc(c *ffcli.Command) string {
var b strings.Builder
fmt.Fprintf(&b, "USAGE\n")
if c.ShortUsage != "" {
fmt.Fprintf(&b, " %s\n", c.ShortUsage)
} else {
fmt.Fprintf(&b, " %s\n", c.Name)
}
fmt.Fprintf(&b, "\n")
if c.LongHelp != "" {
fmt.Fprintf(&b, "%s\n\n", c.LongHelp)
}
if len(c.Subcommands) > 0 {
fmt.Fprintf(&b, "SUBCOMMANDS\n")
tw := tabwriter.NewWriter(&b, 0, 2, 2, ' ', 0)
for _, subcommand := range c.Subcommands {
fmt.Fprintf(tw, " %s\t%s\n", subcommand.Name, subcommand.ShortHelp)
}
tw.Flush()
fmt.Fprintf(&b, "\n")
}
if countFlags(c.FlagSet) > 0 {
fmt.Fprintf(&b, "FLAGS\n")
tw := tabwriter.NewWriter(&b, 0, 2, 2, ' ', 0)
c.FlagSet.VisitAll(func(f *flag.Flag) {
var s string
name, usage := flag.UnquoteUsage(f)
if isBoolFlag(f) {
s = fmt.Sprintf(" --%s, --%s=false", f.Name, f.Name)
} else {
s = fmt.Sprintf(" --%s", f.Name) // Two spaces before --; see next two comments.
if len(name) > 0 {
s += " " + name
}
}
// Four spaces before the tab triggers good alignment
// for both 4- and 8-space tab stops.
s += "\n \t"
s += strings.ReplaceAll(usage, "\n", "\n \t")
if f.DefValue != "" {
s += fmt.Sprintf(" (default %s)", f.DefValue)
}
fmt.Fprintln(&b, s)
})
tw.Flush()
fmt.Fprintf(&b, "\n")
}
return strings.TrimSpace(b.String())
}
func isBoolFlag(f *flag.Flag) bool {
bf, ok := f.Value.(interface {
IsBoolFlag() bool
})
return ok && bf.IsBoolFlag()
}
func countFlags(fs *flag.FlagSet) (n int) {
fs.VisitAll(func(*flag.Flag) { n++ })
return n
}

View File

@@ -0,0 +1,336 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package cli
import (
"bytes"
"encoding/json"
"flag"
"fmt"
"strings"
"testing"
"inet.af/netaddr"
"tailscale.com/ipn"
"tailscale.com/ipn/ipnstate"
"tailscale.com/types/logger"
"tailscale.com/types/preftype"
)
// Test that checkForAccidentalSettingReverts's updateMaskedPrefsFromUpFlag can handle
// all flags. This will panic if a new flag creeps in that's unhandled.
func TestUpdateMaskedPrefsFromUpFlag(t *testing.T) {
mp := new(ipn.MaskedPrefs)
upFlagSet.VisitAll(func(f *flag.Flag) {
updateMaskedPrefsFromUpFlag(mp, f.Name)
})
}
func TestCheckForAccidentalSettingReverts(t *testing.T) {
f := func(flags ...string) map[string]bool {
m := make(map[string]bool)
for _, f := range flags {
m[f] = true
}
return m
}
tests := []struct {
name string
flagSet map[string]bool
curPrefs *ipn.Prefs
mp *ipn.MaskedPrefs
want string
}{
{
name: "bare_up_means_up",
flagSet: f(),
curPrefs: &ipn.Prefs{
ControlURL: ipn.DefaultControlURL,
WantRunning: false,
Hostname: "foo",
},
mp: &ipn.MaskedPrefs{
Prefs: ipn.Prefs{
WantRunning: true,
},
WantRunningSet: true,
},
want: "",
},
{
name: "losing_hostname",
flagSet: f("accept-dns"),
curPrefs: &ipn.Prefs{
ControlURL: ipn.DefaultControlURL,
WantRunning: false,
Hostname: "foo",
CorpDNS: true,
},
mp: &ipn.MaskedPrefs{
Prefs: ipn.Prefs{
ControlURL: ipn.DefaultControlURL,
WantRunning: true,
CorpDNS: true,
},
ControlURLSet: true,
WantRunningSet: true,
CorpDNSSet: true,
},
want: `'tailscale up' without --reset requires all preferences with changing values to be explicitly mentioned; --hostname is not specified but its default value of "" differs from current value "foo"`,
},
{
name: "hostname_changing_explicitly",
flagSet: f("hostname"),
curPrefs: &ipn.Prefs{
ControlURL: ipn.DefaultControlURL,
WantRunning: false,
Hostname: "foo",
},
mp: &ipn.MaskedPrefs{
Prefs: ipn.Prefs{
ControlURL: ipn.DefaultControlURL,
WantRunning: true,
Hostname: "bar",
},
ControlURLSet: true,
WantRunningSet: true,
HostnameSet: true,
},
want: "",
},
{
name: "hostname_changing_empty_explicitly",
flagSet: f("hostname"),
curPrefs: &ipn.Prefs{
ControlURL: ipn.DefaultControlURL,
WantRunning: false,
Hostname: "foo",
},
mp: &ipn.MaskedPrefs{
Prefs: ipn.Prefs{
ControlURL: ipn.DefaultControlURL,
WantRunning: true,
Hostname: "",
},
ControlURLSet: true,
WantRunningSet: true,
HostnameSet: true,
},
want: "",
},
{
name: "empty_slice_equals_nil_slice",
flagSet: f("hostname"),
curPrefs: &ipn.Prefs{
ControlURL: ipn.DefaultControlURL,
AdvertiseRoutes: []netaddr.IPPrefix{},
},
mp: &ipn.MaskedPrefs{
Prefs: ipn.Prefs{
ControlURL: ipn.DefaultControlURL,
AdvertiseRoutes: nil,
},
ControlURLSet: true,
},
want: "",
},
{
// Issue 1725: "tailscale up --authkey=..." (or other non-empty flags) works from
// a fresh server's initial prefs.
name: "up_with_default_prefs",
flagSet: f("authkey"),
curPrefs: ipn.NewPrefs(),
mp: &ipn.MaskedPrefs{
Prefs: *defaultPrefsFromUpArgs(t),
WantRunningSet: true,
},
want: "",
},
}
for _, tt := range tests {
t.Run(tt.name, func(t *testing.T) {
var got string
if err := checkForAccidentalSettingReverts(tt.flagSet, tt.curPrefs, tt.mp); err != nil {
got = err.Error()
}
if got != tt.want {
t.Errorf("unexpected result\n got: %s\nwant: %s\n", got, tt.want)
}
})
}
}
func defaultPrefsFromUpArgs(t testing.TB) *ipn.Prefs {
upFlagSet.Parse(nil) // populates upArgs
if upFlagSet.Lookup("netfilter-mode") == nil && upArgs.netfilterMode == "" {
// This flag is not compiled on on-Linux platforms,
// but prefsFromUpArgs requires it be populated.
upArgs.netfilterMode = defaultNetfilterMode()
}
prefs, err := prefsFromUpArgs(upArgs, logger.Discard, new(ipnstate.Status), "linux")
if err != nil {
t.Fatalf("defaultPrefsFromUpArgs: %v", err)
}
prefs.WantRunning = true
return prefs
}
func TestPrefsFromUpArgs(t *testing.T) {
tests := []struct {
name string
args upArgsT
goos string // runtime.GOOS; empty means linux
st *ipnstate.Status // or nil
want *ipn.Prefs
wantErr string
wantWarn string
}{
{
name: "zero",
goos: "windows",
args: upArgsT{},
want: &ipn.Prefs{
WantRunning: true,
NoSNAT: true,
NetfilterMode: preftype.NetfilterOn, // silly, but default from ipn.NewPref currently
},
},
{
name: "error_advertise_route_invalid_ip",
args: upArgsT{
advertiseRoutes: "foo",
},
wantErr: `"foo" is not a valid IP address or CIDR prefix`,
},
{
name: "error_advertise_route_unmasked_bits",
args: upArgsT{
advertiseRoutes: "1.2.3.4/16",
},
wantErr: `1.2.3.4/16 has non-address bits set; expected 1.2.0.0/16`,
},
{
name: "error_exit_node_bad_ip",
args: upArgsT{
exitNodeIP: "foo",
},
wantErr: `invalid IP address "foo" for --exit-node: unable to parse IP`,
},
{
name: "error_exit_node_allow_lan_without_exit_node",
args: upArgsT{
exitNodeAllowLANAccess: true,
},
wantErr: `--exit-node-allow-lan-access can only be used with --exit-node`,
},
{
name: "error_tag_prefix",
args: upArgsT{
advertiseTags: "foo",
},
wantErr: `tag: "foo": tags must start with 'tag:'`,
},
{
name: "error_long_hostname",
args: upArgsT{
hostname: strings.Repeat("a", 300),
},
wantErr: `hostname too long: 300 bytes (max 256)`,
},
{
name: "error_linux_netfilter_empty",
args: upArgsT{
netfilterMode: "",
},
wantErr: `invalid value --netfilter-mode=""`,
},
{
name: "error_linux_netfilter_bogus",
args: upArgsT{
netfilterMode: "bogus",
},
wantErr: `invalid value --netfilter-mode="bogus"`,
},
{
name: "error_exit_node_ip_is_self_ip",
args: upArgsT{
exitNodeIP: "100.105.106.107",
},
st: &ipnstate.Status{
TailscaleIPs: []netaddr.IP{netaddr.MustParseIP("100.105.106.107")},
},
wantErr: `cannot use 100.105.106.107 as the exit node as it is a local IP address to this machine, did you mean --advertise-exit-node?`,
},
{
name: "warn_linux_netfilter_nodivert",
goos: "linux",
args: upArgsT{
netfilterMode: "nodivert",
},
wantWarn: "netfilter=nodivert; add iptables calls to ts-* chains manually.",
want: &ipn.Prefs{
WantRunning: true,
NetfilterMode: preftype.NetfilterNoDivert,
NoSNAT: true,
},
},
{
name: "warn_linux_netfilter_off",
goos: "linux",
args: upArgsT{
netfilterMode: "off",
},
wantWarn: "netfilter=off; configure iptables yourself.",
want: &ipn.Prefs{
WantRunning: true,
NetfilterMode: preftype.NetfilterOff,
NoSNAT: true,
},
},
}
for _, tt := range tests {
t.Run(tt.name, func(t *testing.T) {
var warnBuf bytes.Buffer
warnf := func(format string, a ...interface{}) {
fmt.Fprintf(&warnBuf, format, a...)
}
goos := tt.goos
if goos == "" {
goos = "linux"
}
st := tt.st
if st == nil {
st = new(ipnstate.Status)
}
got, err := prefsFromUpArgs(tt.args, warnf, st, goos)
gotErr := fmt.Sprint(err)
if tt.wantErr != "" {
if tt.wantErr != gotErr {
t.Errorf("wrong error.\n got error: %v\nwant error: %v\n", gotErr, tt.wantErr)
}
return
}
if err != nil {
t.Fatal(err)
}
if tt.want == nil {
t.Fatal("tt.want is nil")
}
if !got.Equals(tt.want) {
jgot, _ := json.MarshalIndent(got, "", "\t")
jwant, _ := json.MarshalIndent(tt.want, "", "\t")
if bytes.Equal(jgot, jwant) {
t.Logf("prefs differ only in non-JSON-visible ways (nil/non-nil zero-length arrays)")
}
t.Errorf("wrong prefs\n got: %s\nwant: %s\n\ngot: %s\nwant: %s\n",
got.Pretty(), tt.want.Pretty(),
jgot, jwant,
)
}
})
}
}

View File

@@ -1,4 +1,4 @@
// Copyright (c) 2020 Tailscale Inc & AUTHORS All rights reserved.
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
@@ -6,26 +6,21 @@ package cli
import (
"context"
"crypto/tls"
"encoding/json"
"errors"
"flag"
"fmt"
"io"
"log"
"net/http"
"net/http/httptrace"
"net/url"
"os"
"time"
"runtime"
"strings"
"github.com/peterbourgon/ff/v2/ffcli"
"tailscale.com/derp/derphttp"
"tailscale.com/derp/derpmap"
"tailscale.com/net/interfaces"
"tailscale.com/net/tshttpproxy"
"tailscale.com/tailcfg"
"tailscale.com/types/key"
"tailscale.com/wgengine/monitor"
"tailscale.com/client/tailscale"
"tailscale.com/ipn"
"tailscale.com/paths"
"tailscale.com/safesocket"
)
var debugCmd = &ffcli.Command{
@@ -33,143 +28,102 @@ var debugCmd = &ffcli.Command{
Exec: runDebug,
FlagSet: (func() *flag.FlagSet {
fs := flag.NewFlagSet("debug", flag.ExitOnError)
fs.BoolVar(&debugArgs.monitor, "monitor", false, "If true, run link monitor forever. Precludes all other options.")
fs.StringVar(&debugArgs.getURL, "get-url", "", "If non-empty, fetch provided URL.")
fs.StringVar(&debugArgs.derpCheck, "derp", "", "if non-empty, test a DERP ping via named region code")
fs.BoolVar(&debugArgs.goroutines, "daemon-goroutines", false, "If true, dump the tailscaled daemon's goroutines")
fs.BoolVar(&debugArgs.ipn, "ipn", false, "If true, subscribe to IPN notifications")
fs.BoolVar(&debugArgs.prefs, "prefs", false, "If true, dump active prefs")
fs.BoolVar(&debugArgs.pretty, "pretty", false, "If true, pretty-print output (for --prefs)")
fs.BoolVar(&debugArgs.netMap, "netmap", true, "whether to include netmap in --ipn mode")
fs.BoolVar(&debugArgs.localCreds, "local-creds", false, "print how to connect to local tailscaled")
fs.StringVar(&debugArgs.file, "file", "", "get, delete:NAME, or NAME")
return fs
})(),
}
var debugArgs struct {
monitor bool
getURL string
derpCheck string
localCreds bool
goroutines bool
ipn bool
netMap bool
file string
prefs bool
pretty bool
}
func runDebug(ctx context.Context, args []string) error {
if len(args) > 0 {
return errors.New("unknown arguments")
}
if debugArgs.derpCheck != "" {
return checkDerp(ctx, debugArgs.derpCheck)
if debugArgs.localCreds {
port, token, err := safesocket.LocalTCPPortAndToken()
if err == nil {
fmt.Printf("curl -u:%s http://localhost:%d/localapi/v0/status\n", token, port)
return nil
}
if runtime.GOOS == "windows" {
fmt.Printf("curl http://localhost:41112/localapi/v0/status\n")
return nil
}
fmt.Printf("curl --unix-socket %s http://foo/localapi/v0/status\n", paths.DefaultTailscaledSocket())
return nil
}
if debugArgs.monitor {
return runMonitor(ctx)
}
if debugArgs.getURL != "" {
return getURL(ctx, debugArgs.getURL)
}
return errors.New("only --monitor is available at the moment")
}
func runMonitor(ctx context.Context) error {
dump := func() {
st, err := interfaces.GetState()
if debugArgs.prefs {
prefs, err := tailscale.GetPrefs(ctx)
if err != nil {
log.Printf("error getting state: %v", err)
return
return err
}
j, _ := json.MarshalIndent(st, "", " ")
os.Stderr.Write(j)
if debugArgs.pretty {
fmt.Println(prefs.Pretty())
} else {
j, _ := json.MarshalIndent(prefs, "", "\t")
fmt.Println(string(j))
}
return nil
}
mon, err := monitor.New(log.Printf, func() {
log.Printf("Link monitor fired. State:")
dump()
})
if err != nil {
return err
if debugArgs.goroutines {
goroutines, err := tailscale.Goroutines(ctx)
if err != nil {
return err
}
os.Stdout.Write(goroutines)
return nil
}
log.Printf("Starting link change monitor; initial state:")
dump()
mon.Start()
log.Printf("Started link change monitor; waiting...")
select {}
}
if debugArgs.ipn {
c, bc, ctx, cancel := connect(ctx)
defer cancel()
func getURL(ctx context.Context, urlStr string) error {
if urlStr == "login" {
urlStr = "https://login.tailscale.com"
}
log.SetOutput(os.Stdout)
ctx = httptrace.WithClientTrace(ctx, &httptrace.ClientTrace{
GetConn: func(hostPort string) { log.Printf("GetConn(%q)", hostPort) },
GotConn: func(info httptrace.GotConnInfo) { log.Printf("GotConn: %+v", info) },
DNSStart: func(info httptrace.DNSStartInfo) { log.Printf("DNSStart: %+v", info) },
DNSDone: func(info httptrace.DNSDoneInfo) { log.Printf("DNSDoneInfo: %+v", info) },
TLSHandshakeStart: func() { log.Printf("TLSHandshakeStart") },
TLSHandshakeDone: func(cs tls.ConnectionState, err error) { log.Printf("TLSHandshakeDone: %+v, %v", cs, err) },
WroteRequest: func(info httptrace.WroteRequestInfo) { log.Printf("WroteRequest: %+v", info) },
})
req, err := http.NewRequestWithContext(ctx, "GET", urlStr, nil)
if err != nil {
return fmt.Errorf("http.NewRequestWithContext: %v", err)
}
proxyURL, err := tshttpproxy.ProxyFromEnvironment(req)
if err != nil {
return fmt.Errorf("tshttpproxy.ProxyFromEnvironment: %v", err)
}
log.Printf("proxy: %v", proxyURL)
tr := &http.Transport{
Proxy: func(*http.Request) (*url.URL, error) { return proxyURL, nil },
ProxyConnectHeader: http.Header{},
DisableKeepAlives: true,
}
if proxyURL != nil {
auth, err := tshttpproxy.GetAuthHeader(proxyURL)
if err == nil && auth != "" {
tr.ProxyConnectHeader.Set("Proxy-Authorization", auth)
}
const truncLen = 20
if len(auth) > truncLen {
auth = fmt.Sprintf("%s...(%d total bytes)", auth[:truncLen], len(auth))
}
log.Printf("tshttpproxy.GetAuthHeader(%v) for Proxy-Auth: = %q, %v", proxyURL, auth, err)
}
res, err := tr.RoundTrip(req)
if err != nil {
return fmt.Errorf("Transport.RoundTrip: %v", err)
}
defer res.Body.Close()
return res.Write(os.Stdout)
}
func checkDerp(ctx context.Context, derpRegion string) error {
dmap := derpmap.Prod()
getRegion := func() *tailcfg.DERPRegion {
for _, r := range dmap.Regions {
if r.RegionCode == derpRegion {
return r
bc.SetNotifyCallback(func(n ipn.Notify) {
if !debugArgs.netMap {
n.NetMap = nil
}
j, _ := json.MarshalIndent(n, "", "\t")
fmt.Printf("%s\n", j)
})
bc.RequestEngineStatus()
pump(ctx, bc, c)
return errors.New("exit")
}
if debugArgs.file != "" {
if debugArgs.file == "get" {
wfs, err := tailscale.WaitingFiles(ctx)
if err != nil {
log.Fatal(err)
}
e := json.NewEncoder(os.Stdout)
e.SetIndent("", "\t")
e.Encode(wfs)
return nil
}
for _, r := range dmap.Regions {
log.Printf("Known region: %q", r.RegionCode)
delete := strings.HasPrefix(debugArgs.file, "delete:")
if delete {
return tailscale.DeleteWaitingFile(ctx, strings.TrimPrefix(debugArgs.file, "delete:"))
}
log.Fatalf("unknown region %q", derpRegion)
panic("unreachable")
rc, size, err := tailscale.GetWaitingFile(ctx, debugArgs.file)
if err != nil {
return err
}
log.Printf("Size: %v\n", size)
io.Copy(os.Stdout, rc)
return nil
}
priv1 := key.NewPrivate()
priv2 := key.NewPrivate()
c1 := derphttp.NewRegionClient(priv1, log.Printf, getRegion)
c2 := derphttp.NewRegionClient(priv2, log.Printf, getRegion)
c2.NotePreferred(true) // just to open it
m, err := c2.Recv()
log.Printf("c2 got %T, %v", m, err)
t0 := time.Now()
if err := c1.Send(priv2.Public(), []byte("hello")); err != nil {
return err
}
fmt.Println(time.Since(t0))
m, err = c2.Recv()
log.Printf("c2 got %T, %v", m, err)
if err != nil {
return err
}
log.Printf("ok")
return err
return nil
}

View File

@@ -6,10 +6,12 @@ package cli
import (
"context"
"fmt"
"log"
"time"
"os"
"github.com/peterbourgon/ff/v2/ffcli"
"tailscale.com/client/tailscale"
"tailscale.com/ipn"
)
@@ -26,41 +28,19 @@ func runDown(ctx context.Context, args []string) error {
log.Fatalf("too many non-flag arguments: %q", args)
}
c, bc, ctx, cancel := connect(ctx)
defer cancel()
timer := time.AfterFunc(5*time.Second, func() {
log.Fatalf("timeout running stop")
st, err := tailscale.Status(ctx)
if err != nil {
return fmt.Errorf("error fetching current status: %w", err)
}
if st.BackendState == "Stopped" {
fmt.Fprintf(os.Stderr, "Tailscale was already stopped.\n")
return nil
}
_, err = tailscale.EditPrefs(ctx, &ipn.MaskedPrefs{
Prefs: ipn.Prefs{
WantRunning: false,
},
WantRunningSet: true,
})
defer timer.Stop()
bc.SetNotifyCallback(func(n ipn.Notify) {
if n.ErrMessage != nil {
log.Fatal(*n.ErrMessage)
}
if n.Status != nil {
cur := n.Status.BackendState
switch cur {
case "Stopped":
log.Printf("already stopped")
cancel()
default:
log.Printf("was in state %q", cur)
}
return
}
if n.State != nil {
log.Printf("now in state %q", *n.State)
if *n.State == ipn.Stopped {
cancel()
}
return
}
})
bc.RequestStatus()
bc.SetWantRunning(false)
pump(ctx, bc, c)
return nil
return err
}

105
cmd/tailscale/cli/ip.go Normal file
View File

@@ -0,0 +1,105 @@
// Copyright (c) 2020 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package cli
import (
"context"
"errors"
"flag"
"fmt"
"github.com/peterbourgon/ff/v2/ffcli"
"inet.af/netaddr"
"tailscale.com/client/tailscale"
"tailscale.com/ipn/ipnstate"
)
var ipCmd = &ffcli.Command{
Name: "ip",
ShortUsage: "ip [-4] [-6] [peername]",
ShortHelp: "Show current Tailscale IP address(es)",
LongHelp: "Shows the Tailscale IP address of the current machine without an argument. With an argument, it shows the IP of a named peer.",
Exec: runIP,
FlagSet: (func() *flag.FlagSet {
fs := flag.NewFlagSet("ip", flag.ExitOnError)
fs.BoolVar(&ipArgs.want4, "4", false, "only print IPv4 address")
fs.BoolVar(&ipArgs.want6, "6", false, "only print IPv6 address")
return fs
})(),
}
var ipArgs struct {
want4 bool
want6 bool
}
func runIP(ctx context.Context, args []string) error {
if len(args) > 1 {
return errors.New("unknown arguments")
}
var of string
if len(args) == 1 {
of = args[0]
}
v4, v6 := ipArgs.want4, ipArgs.want6
if v4 && v6 {
return errors.New("tailscale up -4 and -6 are mutually exclusive")
}
if !v4 && !v6 {
v4, v6 = true, true
}
st, err := tailscale.Status(ctx)
if err != nil {
return err
}
ips := st.TailscaleIPs
if of != "" {
ip, err := tailscaleIPFromArg(ctx, of)
if err != nil {
return err
}
peer, ok := peerMatchingIP(st, ip)
if !ok {
return fmt.Errorf("no peer found with IP %v", ip)
}
ips = peer.TailscaleIPs
}
if len(ips) == 0 {
return fmt.Errorf("no current Tailscale IPs; state: %v", st.BackendState)
}
match := false
for _, ip := range ips {
if ip.Is4() && v4 || ip.Is6() && v6 {
match = true
fmt.Println(ip)
}
}
if !match {
if ipArgs.want4 {
return errors.New("no Tailscale IPv4 address")
}
if ipArgs.want6 {
return errors.New("no Tailscale IPv6 address")
}
}
return nil
}
func peerMatchingIP(st *ipnstate.Status, ipStr string) (ps *ipnstate.PeerStatus, ok bool) {
ip, err := netaddr.ParseIP(ipStr)
if err != nil {
return
}
for _, ps = range st.Peer {
for _, pip := range ps.TailscaleIPs {
if ip == pip {
return ps, true
}
}
}
return nil, false
}

View File

@@ -0,0 +1,34 @@
// Copyright (c) 2020 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package cli
import (
"context"
"log"
"strings"
"github.com/peterbourgon/ff/v2/ffcli"
"tailscale.com/client/tailscale"
)
var logoutCmd = &ffcli.Command{
Name: "logout",
ShortUsage: "logout [flags]",
ShortHelp: "Disconnect from Tailscale and expire current node key",
LongHelp: strings.TrimSpace(`
"tailscale logout" brings the network down and invalidates
the current node key, forcing a future use of it to cause
a reauthentication.
`),
Exec: runLogout,
}
func runLogout(ctx context.Context, args []string) error {
if len(args) > 0 {
log.Fatalf("too many non-flag arguments: %q", args)
}
return tailscale.Logout(ctx)
}

View File

@@ -18,6 +18,7 @@ import (
"github.com/peterbourgon/ff/v2/ffcli"
"tailscale.com/derp/derpmap"
"tailscale.com/net/netcheck"
"tailscale.com/net/portmapper"
"tailscale.com/tailcfg"
"tailscale.com/types/logger"
)
@@ -43,7 +44,10 @@ var netcheckArgs struct {
}
func runNetcheck(ctx context.Context, args []string) error {
c := &netcheck.Client{}
c := &netcheck.Client{
UDPBindAddr: os.Getenv("TS_DEBUG_NETCHECK_UDP_BIND"),
PortMapper: portmapper.NewClient(logger.WithPrefix(log.Printf, "portmap: ")),
}
if netcheckArgs.verbose {
c.Logf = logger.WithPrefix(log.Printf, "netcheck: ")
c.Verbose = true

View File

@@ -15,6 +15,7 @@ import (
"time"
"github.com/peterbourgon/ff/v2/ffcli"
"tailscale.com/client/tailscale"
"tailscale.com/ipn"
"tailscale.com/ipn/ipnstate"
)
@@ -47,6 +48,7 @@ relay node.
fs := flag.NewFlagSet("ping", flag.ExitOnError)
fs.BoolVar(&pingArgs.verbose, "verbose", false, "verbose output")
fs.BoolVar(&pingArgs.untilDirect, "until-direct", true, "stop once a direct path is established")
fs.BoolVar(&pingArgs.tsmp, "tsmp", false, "do a TSMP-level ping (through IP + wireguard, but not involving host OS stack)")
fs.IntVar(&pingArgs.num, "c", 10, "max number of pings to send")
fs.DurationVar(&pingArgs.timeout, "timeout", 5*time.Second, "timeout before giving up on a ping")
return fs
@@ -57,6 +59,7 @@ var pingArgs struct {
num int
untilDirect bool
verbose bool
tsmp bool
timeout time.Duration
}
@@ -64,44 +67,41 @@ func runPing(ctx context.Context, args []string) error {
c, bc, ctx, cancel := connect(ctx)
defer cancel()
if len(args) != 1 {
if len(args) != 1 || args[0] == "" {
return errors.New("usage: ping <hostname-or-IP>")
}
hostOrIP := args[0]
var ip string
var res net.Resolver
if addrs, err := res.LookupHost(ctx, hostOrIP); err != nil {
return fmt.Errorf("error looking up IP of %q: %v", hostOrIP, err)
} else if len(addrs) == 0 {
return fmt.Errorf("no IPs found for %q", hostOrIP)
} else {
ip = addrs[0]
}
if pingArgs.verbose && ip != hostOrIP {
log.Printf("lookup %q => %q", hostOrIP, ip)
}
ch := make(chan *ipnstate.PingResult, 1)
prc := make(chan *ipnstate.PingResult, 1)
bc.SetNotifyCallback(func(n ipn.Notify) {
if n.ErrMessage != nil {
log.Fatal(*n.ErrMessage)
}
if pr := n.PingResult; pr != nil && pr.IP == ip {
ch <- pr
prc <- pr
}
})
go pump(ctx, bc, c)
hostOrIP := args[0]
ip, err := tailscaleIPFromArg(ctx, hostOrIP)
if err != nil {
return err
}
if pingArgs.verbose && ip != hostOrIP {
log.Printf("lookup %q => %q", hostOrIP, ip)
}
n := 0
anyPong := false
for {
n++
bc.Ping(ip)
bc.Ping(ip, pingArgs.tsmp)
timer := time.NewTimer(pingArgs.timeout)
select {
case <-timer.C:
fmt.Printf("timeout waiting for ping reply\n")
case pr := <-ch:
case pr := <-prc:
timer.Stop()
if pr.Err != "" {
return errors.New(pr.Err)
@@ -111,8 +111,20 @@ func runPing(ctx context.Context, args []string) error {
if pr.DERPRegionID != 0 {
via = fmt.Sprintf("DERP(%s)", pr.DERPRegionCode)
}
if pingArgs.tsmp {
// TODO(bradfitz): populate the rest of ipnstate.PingResult for TSMP queries?
// For now just say it came via TSMP.
via = "TSMP"
}
anyPong = true
fmt.Printf("pong from %s (%s) via %v in %v\n", pr.NodeName, pr.NodeIP, via, latency)
extra := ""
if pr.PeerAPIPort != 0 {
extra = fmt.Sprintf(", %d", pr.PeerAPIPort)
}
fmt.Printf("pong from %s (%s%s) via %v in %v\n", pr.NodeName, pr.NodeIP, extra, via, latency)
if pingArgs.tsmp {
return nil
}
if pr.Endpoint != "" && pingArgs.untilDirect {
return nil
}
@@ -128,3 +140,34 @@ func runPing(ctx context.Context, args []string) error {
}
}
}
func tailscaleIPFromArg(ctx context.Context, hostOrIP string) (ip string, err error) {
// If the argument is an IP address, use it directly without any resolution.
if net.ParseIP(hostOrIP) != nil {
return hostOrIP, nil
}
// Otherwise, try to resolve it first from the network peer list.
st, err := tailscale.Status(ctx)
if err != nil {
return "", err
}
for _, ps := range st.Peer {
if hostOrIP == dnsOrQuoteHostname(st, ps) || hostOrIP == ps.DNSName {
if len(ps.TailscaleIPs) == 0 {
return "", errors.New("node found but lacks an IP")
}
return ps.TailscaleIPs[0].String(), nil
}
}
// Finally, use DNS.
var res net.Resolver
if addrs, err := res.LookupHost(ctx, hostOrIP); err != nil {
return "", fmt.Errorf("error looking up IP of %q: %v", hostOrIP, err)
} else if len(addrs) == 0 {
return "", fmt.Errorf("no IPs found for %q", hostOrIP)
} else {
return addrs[0], nil
}
}

218
cmd/tailscale/cli/push.go Normal file
View File

@@ -0,0 +1,218 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package cli
import (
"bytes"
"context"
"errors"
"flag"
"fmt"
"io"
"log"
"mime"
"net/http"
"net/url"
"os"
"strconv"
"time"
"unicode/utf8"
"github.com/peterbourgon/ff/v2/ffcli"
"golang.org/x/time/rate"
"inet.af/netaddr"
"tailscale.com/client/tailscale"
)
var pushCmd = &ffcli.Command{
Name: "push",
ShortUsage: "push [--flags] <hostname-or-IP> <file>",
ShortHelp: "Push a file to a host",
Exec: runPush,
FlagSet: (func() *flag.FlagSet {
fs := flag.NewFlagSet("push", flag.ExitOnError)
fs.StringVar(&pushArgs.name, "name", "", "alternate filename to use, especially useful when <file> is \"-\" (stdin)")
fs.BoolVar(&pushArgs.verbose, "verbose", false, "verbose output")
fs.BoolVar(&pushArgs.targets, "targets", false, "list possible push targets")
return fs
})(),
}
var pushArgs struct {
name string
verbose bool
targets bool
}
func runPush(ctx context.Context, args []string) error {
if pushArgs.targets {
return runPushTargets(ctx, args)
}
if len(args) != 2 || args[0] == "" {
return errors.New("usage: push <hostname-or-IP> <file>\n push --targets")
}
var ip string
hostOrIP, fileArg := args[0], args[1]
ip, err := tailscaleIPFromArg(ctx, hostOrIP)
if err != nil {
return err
}
peerAPIBase, lastSeen, err := discoverPeerAPIBase(ctx, ip)
if err != nil {
return err
}
if !lastSeen.IsZero() && time.Since(lastSeen) > lastSeenOld {
fmt.Fprintf(os.Stderr, "# warning: %s last seen %v ago\n", hostOrIP, time.Since(lastSeen).Round(time.Minute))
}
var fileContents io.Reader
var name = pushArgs.name
var contentLength int64 = -1
if fileArg == "-" {
fileContents = os.Stdin
if name == "" {
name, fileContents, err = pickStdinFilename()
if err != nil {
return err
}
}
} else {
f, err := os.Open(fileArg)
if err != nil {
return err
}
defer f.Close()
fi, err := f.Stat()
if err != nil {
return err
}
if fi.IsDir() {
return errors.New("directories not supported")
}
contentLength = fi.Size()
fileContents = io.LimitReader(f, contentLength)
if name == "" {
name = fileArg
}
if slow, _ := strconv.ParseBool(os.Getenv("TS_DEBUG_SLOW_PUSH")); slow {
fileContents = &slowReader{r: fileContents}
}
}
dstURL := peerAPIBase + "/v0/put/" + url.PathEscape(name)
req, err := http.NewRequestWithContext(ctx, "PUT", dstURL, fileContents)
if err != nil {
return err
}
req.ContentLength = contentLength
if pushArgs.verbose {
log.Printf("sending to %v ...", dstURL)
}
res, err := http.DefaultClient.Do(req)
if err != nil {
return err
}
defer res.Body.Close()
if res.StatusCode == 200 {
return nil
}
io.Copy(os.Stdout, res.Body)
return errors.New(res.Status)
}
func discoverPeerAPIBase(ctx context.Context, ipStr string) (base string, lastSeen time.Time, err error) {
ip, err := netaddr.ParseIP(ipStr)
if err != nil {
return "", time.Time{}, err
}
fts, err := tailscale.FileTargets(ctx)
if err != nil {
return "", time.Time{}, err
}
for _, ft := range fts {
n := ft.Node
for _, a := range n.Addresses {
if a.IP != ip {
continue
}
if n.LastSeen != nil {
lastSeen = *n.LastSeen
}
return ft.PeerAPIURL, lastSeen, nil
}
}
return "", time.Time{}, errors.New("target seems to be running an old Tailscale version")
}
const maxSniff = 4 << 20
func ext(b []byte) string {
if len(b) < maxSniff && utf8.Valid(b) {
return ".txt"
}
if exts, _ := mime.ExtensionsByType(http.DetectContentType(b)); len(exts) > 0 {
return exts[0]
}
return ""
}
// pickStdinFilename reads a bit of stdin to return a good filename
// for its contents. The returned Reader is the concatenation of the
// read and unread bits.
func pickStdinFilename() (name string, r io.Reader, err error) {
sniff, err := io.ReadAll(io.LimitReader(os.Stdin, maxSniff))
if err != nil {
return "", nil, err
}
return "stdin" + ext(sniff), io.MultiReader(bytes.NewReader(sniff), os.Stdin), nil
}
type slowReader struct {
r io.Reader
rl *rate.Limiter
}
func (r *slowReader) Read(p []byte) (n int, err error) {
const burst = 4 << 10
plen := len(p)
if plen > burst {
plen = burst
}
if r.rl == nil {
r.rl = rate.NewLimiter(rate.Limit(1<<10), burst)
}
n, err = r.r.Read(p[:plen])
r.rl.WaitN(context.Background(), n)
return
}
const lastSeenOld = 20 * time.Minute
func runPushTargets(ctx context.Context, args []string) error {
if len(args) > 0 {
return errors.New("invalid arguments with --targets")
}
fts, err := tailscale.FileTargets(ctx)
if err != nil {
return err
}
for _, ft := range fts {
n := ft.Node
var ago string
if n.LastSeen == nil {
ago = "\tnode never seen"
} else {
if d := time.Since(*n.LastSeen); d > lastSeenOld {
ago = fmt.Sprintf("\tlast seen %v ago", d.Round(time.Minute))
}
}
fmt.Printf("%s\t%s%s\n", n.Addresses[0].IP, n.ComputedName, ago)
}
return nil
}

View File

@@ -10,22 +10,25 @@ import (
"encoding/json"
"flag"
"fmt"
"log"
"net"
"net/http"
"os"
"strings"
"time"
"github.com/peterbourgon/ff/v2/ffcli"
"github.com/toqueteos/webbrowser"
"inet.af/netaddr"
"tailscale.com/client/tailscale"
"tailscale.com/ipn"
"tailscale.com/ipn/ipnstate"
"tailscale.com/net/interfaces"
"tailscale.com/util/dnsname"
)
var statusCmd = &ffcli.Command{
Name: "status",
ShortUsage: "status [-active] [-web] [-json]",
ShortUsage: "status [--active] [--web] [--json]",
ShortHelp: "Show state of tailscaled and its connections",
Exec: runStatus,
FlagSet: (func() *flag.FlagSet {
@@ -34,7 +37,8 @@ var statusCmd = &ffcli.Command{
fs.BoolVar(&statusArgs.web, "web", false, "run webserver with HTML showing status")
fs.BoolVar(&statusArgs.active, "active", false, "filter output to only peers with active sessions (not applicable to web mode)")
fs.BoolVar(&statusArgs.self, "self", true, "show status of local machine")
fs.StringVar(&statusArgs.listen, "listen", "127.0.0.1:8384", "listen address; use port 0 for automatic")
fs.BoolVar(&statusArgs.peers, "peers", true, "show status of peers")
fs.StringVar(&statusArgs.listen, "listen", "127.0.0.1:8384", "listen address for web mode; use port 0 for automatic")
fs.BoolVar(&statusArgs.browser, "browser", true, "Open a browser in web mode")
return fs
})(),
@@ -47,35 +51,11 @@ var statusArgs struct {
browser bool // in web mode, whether to open browser
active bool // in CLI mode, filter output to only peers with active sessions
self bool // in CLI mode, show status of local machine
peers bool // in CLI mode, show status of peer machines
}
func runStatus(ctx context.Context, args []string) error {
c, bc, ctx, cancel := connect(ctx)
defer cancel()
bc.AllowVersionSkew = true
ch := make(chan *ipnstate.Status, 1)
bc.SetNotifyCallback(func(n ipn.Notify) {
if n.ErrMessage != nil {
log.Fatal(*n.ErrMessage)
}
if n.Status != nil {
ch <- n.Status
}
})
go pump(ctx, bc, c)
getStatus := func() (*ipnstate.Status, error) {
bc.RequestStatus()
select {
case st := <-ch:
return st, nil
case <-ctx.Done():
return nil, ctx.Err()
}
}
st, err := getStatus()
st, err := tailscale.Status(ctx)
if err != nil {
return err
}
@@ -113,7 +93,7 @@ func runStatus(ctx context.Context, args []string) error {
http.NotFound(w, r)
return
}
st, err := getStatus()
st, err := tailscale.Status(ctx)
if err != nil {
http.Error(w, err.Error(), 500)
return
@@ -127,39 +107,59 @@ func runStatus(ctx context.Context, args []string) error {
return err
}
if st.BackendState == ipn.Stopped.String() {
switch st.BackendState {
default:
fmt.Fprintf(os.Stderr, "unexpected state: %s\n", st.BackendState)
os.Exit(1)
case ipn.Stopped.String():
fmt.Println("Tailscale is stopped.")
os.Exit(1)
case ipn.NeedsLogin.String():
fmt.Println("Logged out.")
if st.AuthURL != "" {
fmt.Printf("\nLog in at: %s\n", st.AuthURL)
}
os.Exit(1)
case ipn.NeedsMachineAuth.String():
fmt.Println("Machine is not yet authorized by tailnet admin.")
os.Exit(1)
case ipn.Running.String():
// Run below.
}
var buf bytes.Buffer
f := func(format string, a ...interface{}) { fmt.Fprintf(&buf, format, a...) }
printPS := func(ps *ipnstate.PeerStatus) {
active := peerActive(ps)
f("%s %-7s %-15s %-18s tx=%8d rx=%8d ",
ps.PublicKey.ShortString(),
f("%-15s %-20s %-12s %-7s ",
firstIPString(ps.TailscaleIPs),
dnsOrQuoteHostname(st, ps),
ownerLogin(st, ps),
ps.OS,
ps.TailAddr,
ps.SimpleHostName(),
ps.TxBytes,
ps.RxBytes,
)
relay := ps.Relay
if active && relay != "" && ps.CurAddr == "" {
relay = "*" + relay + "*"
} else {
relay = " " + relay
}
f("%-6s", relay)
for i, addr := range ps.Addrs {
if i != 0 {
f(", ")
}
if addr == ps.CurAddr {
f("*%s*", addr)
anyTraffic := ps.TxBytes != 0 || ps.RxBytes != 0
if !active {
if ps.ExitNode {
f("idle; exit node")
} else if anyTraffic {
f("idle")
} else {
f("%s", addr)
f("-")
}
} else {
f("active; ")
if ps.ExitNode {
f("exit node; ")
}
if relay != "" && ps.CurAddr == "" {
f("relay %q", relay)
} else if ps.CurAddr != "" {
f("direct %s", ps.CurAddr)
}
}
if anyTraffic {
f(", tx %d rx %d", ps.TxBytes, ps.RxBytes)
}
f("\n")
}
@@ -167,16 +167,23 @@ func runStatus(ctx context.Context, args []string) error {
if statusArgs.self && st.Self != nil {
printPS(st.Self)
}
for _, peer := range st.Peers() {
ps := st.Peer[peer]
if ps.ShareeNode {
continue
if statusArgs.peers {
var peers []*ipnstate.PeerStatus
for _, peer := range st.Peers() {
ps := st.Peer[peer]
if ps.ShareeNode {
continue
}
peers = append(peers, ps)
}
active := peerActive(ps)
if statusArgs.active && !active {
continue
ipnstate.SortPeers(peers)
for _, ps := range peers {
active := peerActive(ps)
if statusArgs.active && !active {
continue
}
printPS(ps)
}
printPS(ps)
}
os.Stdout.Write(buf.Bytes())
return nil
@@ -188,3 +195,32 @@ func runStatus(ctx context.Context, args []string) error {
func peerActive(ps *ipnstate.PeerStatus) bool {
return !ps.LastWrite.IsZero() && time.Since(ps.LastWrite) < 2*time.Minute
}
func dnsOrQuoteHostname(st *ipnstate.Status, ps *ipnstate.PeerStatus) string {
baseName := dnsname.TrimSuffix(ps.DNSName, st.MagicDNSSuffix)
if baseName != "" {
return baseName
}
return fmt.Sprintf("(%q)", dnsname.SanitizeHostname(ps.HostName))
}
func ownerLogin(st *ipnstate.Status, ps *ipnstate.PeerStatus) string {
if ps.UserID.IsZero() {
return "-"
}
u, ok := st.User[ps.UserID]
if !ok {
return fmt.Sprint(ps.UserID)
}
if i := strings.Index(u.LoginName, "@"); i != -1 {
return u.LoginName[:i+1]
}
return u.LoginName
}
func firstIPString(v []netaddr.IP) string {
if len(v) == 0 {
return ""
}
return v[0].String()
}

View File

@@ -5,63 +5,84 @@
package cli
import (
"bytes"
"context"
"errors"
"flag"
"fmt"
"log"
"os"
"os/exec"
"reflect"
"runtime"
"sort"
"strconv"
"strings"
"sync"
"github.com/go-multierror/multierror"
"github.com/peterbourgon/ff/v2/ffcli"
"inet.af/netaddr"
"tailscale.com/client/tailscale"
"tailscale.com/ipn"
"tailscale.com/ipn/ipnstate"
"tailscale.com/safesocket"
"tailscale.com/tailcfg"
"tailscale.com/version"
"tailscale.com/types/logger"
"tailscale.com/types/preftype"
"tailscale.com/version/distro"
"tailscale.com/wgengine/router"
)
var upCmd = &ffcli.Command{
Name: "up",
ShortUsage: "up [flags]",
ShortHelp: "Connect to your Tailscale network",
ShortHelp: "Connect to Tailscale, logging in if needed",
LongHelp: strings.TrimSpace(`
"tailscale up" connects this machine to your Tailscale network,
triggering authentication if necessary.
The flags passed to this command are specific to this machine. If you don't
specify any flags, options are reset to their default.
With no flags, "tailscale up" brings the network online without
changing any settings. (That is, it's the opposite of "tailscale
down").
If flags are specified, the flags must be the complete set of desired
settings. An error is returned if any setting would be changed as a
result of an unspecified flag's default value, unless the --reset
flag is also used.
`),
FlagSet: (func() *flag.FlagSet {
upf := flag.NewFlagSet("up", flag.ExitOnError)
upf.StringVar(&upArgs.server, "login-server", "https://login.tailscale.com", "base URL of control server")
upf.BoolVar(&upArgs.acceptRoutes, "accept-routes", false, "accept routes advertised by other Tailscale nodes")
upf.BoolVar(&upArgs.acceptDNS, "accept-dns", true, "accept DNS configuration from the admin panel")
upf.BoolVar(&upArgs.singleRoutes, "host-routes", true, "install host routes to other Tailscale nodes")
upf.BoolVar(&upArgs.shieldsUp, "shields-up", false, "don't allow incoming connections")
upf.BoolVar(&upArgs.forceReauth, "force-reauth", false, "force reauthentication")
upf.StringVar(&upArgs.advertiseTags, "advertise-tags", "", "ACL tags to request (comma-separated, e.g. eng,montreal,ssh)")
upf.StringVar(&upArgs.authKey, "authkey", "", "node authorization key")
upf.StringVar(&upArgs.hostname, "hostname", "", "hostname to use instead of the one provided by the OS")
if runtime.GOOS == "linux" || isBSD(runtime.GOOS) || version.OS() == "macOS" {
upf.StringVar(&upArgs.advertiseRoutes, "advertise-routes", "", "routes to advertise to other nodes (comma-separated, e.g. 10.0.0.0/8,192.168.0.0/24)")
}
if runtime.GOOS == "linux" {
upf.BoolVar(&upArgs.snat, "snat-subnet-routes", true, "source NAT traffic to local routes advertised with --advertise-routes")
upf.StringVar(&upArgs.netfilterMode, "netfilter-mode", defaultNetfilterMode(), "netfilter mode (one of on, nodivert, off)")
}
return upf
})(),
Exec: runUp,
FlagSet: upFlagSet,
Exec: runUp,
}
var upFlagSet = (func() *flag.FlagSet {
upf := flag.NewFlagSet("up", flag.ExitOnError)
upf.BoolVar(&upArgs.forceReauth, "force-reauth", false, "force reauthentication")
upf.BoolVar(&upArgs.reset, "reset", false, "reset unspecified settings to their default values")
upf.StringVar(&upArgs.server, "login-server", ipn.DefaultControlURL, "base URL of control server")
upf.BoolVar(&upArgs.acceptRoutes, "accept-routes", false, "accept routes advertised by other Tailscale nodes")
upf.BoolVar(&upArgs.acceptDNS, "accept-dns", true, "accept DNS configuration from the admin panel")
upf.BoolVar(&upArgs.singleRoutes, "host-routes", true, "install host routes to other Tailscale nodes")
upf.StringVar(&upArgs.exitNodeIP, "exit-node", "", "Tailscale IP of the exit node for internet traffic")
upf.BoolVar(&upArgs.exitNodeAllowLANAccess, "exit-node-allow-lan-access", false, "Allow direct access to the local network when routing traffic via an exit node")
upf.BoolVar(&upArgs.shieldsUp, "shields-up", false, "don't allow incoming connections")
upf.StringVar(&upArgs.advertiseTags, "advertise-tags", "", "comma-separated ACL tags to request; each must start with \"tag:\" (e.g. \"tag:eng,tag:montreal,tag:ssh\")")
upf.StringVar(&upArgs.authKey, "authkey", "", "node authorization key")
upf.StringVar(&upArgs.hostname, "hostname", "", "hostname to use instead of the one provided by the OS")
upf.StringVar(&upArgs.advertiseRoutes, "advertise-routes", "", "routes to advertise to other nodes (comma-separated, e.g. \"10.0.0.0/8,192.168.0.0/24\")")
upf.BoolVar(&upArgs.advertiseDefaultRoute, "advertise-exit-node", false, "offer to be an exit node for internet traffic for the tailnet")
if safesocket.PlatformUsesPeerCreds() {
upf.StringVar(&upArgs.opUser, "operator", "", "Unix username to allow to operate on tailscaled without sudo")
}
if runtime.GOOS == "linux" {
upf.BoolVar(&upArgs.snat, "snat-subnet-routes", true, "source NAT traffic to local routes advertised with --advertise-routes")
upf.StringVar(&upArgs.netfilterMode, "netfilter-mode", defaultNetfilterMode(), "netfilter mode (one of on, nodivert, off)")
}
if runtime.GOOS == "windows" {
upf.BoolVar(&upArgs.forceDaemon, "unattended", false, "run in \"Unattended Mode\" where Tailscale keeps running even after the current GUI user logs out (Windows-only)")
}
return upf
})()
func defaultNetfilterMode() string {
if distro.Get() == distro.Synology {
return "off"
@@ -69,89 +90,102 @@ func defaultNetfilterMode() string {
return "on"
}
var upArgs struct {
server string
acceptRoutes bool
acceptDNS bool
singleRoutes bool
shieldsUp bool
forceReauth bool
advertiseRoutes string
advertiseTags string
snat bool
netfilterMode string
authKey string
hostname string
type upArgsT struct {
reset bool
server string
acceptRoutes bool
acceptDNS bool
singleRoutes bool
exitNodeIP string
exitNodeAllowLANAccess bool
shieldsUp bool
forceReauth bool
forceDaemon bool
advertiseRoutes string
advertiseDefaultRoute bool
advertiseTags string
snat bool
netfilterMode string
authKey string
hostname string
opUser string
}
func isBSD(s string) bool {
return s == "dragonfly" || s == "freebsd" || s == "netbsd" || s == "openbsd"
}
var upArgs upArgsT
func warnf(format string, args ...interface{}) {
fmt.Printf("Warning: "+format+"\n", args...)
}
// checkIPForwarding prints warnings if IP forwarding is not
// enabled, or if we were unable to verify the state of IP forwarding.
func checkIPForwarding() {
var key string
var (
ipv4default = netaddr.MustParseIPPrefix("0.0.0.0/0")
ipv6default = netaddr.MustParseIPPrefix("::/0")
)
if runtime.GOOS == "linux" {
key = "net.ipv4.ip_forward"
} else if isBSD(runtime.GOOS) || version.OS() == "macOS" {
key = "net.inet.ip.forwarding"
} else {
return
}
bs, err := exec.Command("sysctl", "-n", key).Output()
if err != nil {
warnf("couldn't check %s (%v).\nSubnet routes won't work without IP forwarding.", key, err)
return
}
on, err := strconv.ParseBool(string(bytes.TrimSpace(bs)))
if err != nil {
warnf("couldn't parse %s (%v).\nSubnet routes won't work without IP forwarding.", key, err)
return
}
if !on {
warnf("%s is disabled. Subnet routes won't work.", key)
}
}
func runUp(ctx context.Context, args []string) error {
if len(args) > 0 {
log.Fatalf("too many non-flag arguments: %q", args)
}
if distro.Get() == distro.Synology {
notSupported := "not yet supported on Synology; see https://github.com/tailscale/tailscale/issues/451"
if upArgs.advertiseRoutes != "" {
return errors.New("--advertise-routes is " + notSupported)
}
if upArgs.acceptRoutes {
return errors.New("--accept-routes is " + notSupported)
}
if upArgs.netfilterMode != "off" {
return errors.New("--netfilter-mode values besides \"off\" " + notSupported)
}
}
var routes []netaddr.IPPrefix
// prefsFromUpArgs returns the ipn.Prefs for the provided args.
//
// Note that the parameters upArgs and warnf are named intentionally
// to shadow the globals to prevent accidental misuse of them. This
// function exists for testing and should have no side effects or
// outside interactions (e.g. no making Tailscale local API calls).
func prefsFromUpArgs(upArgs upArgsT, warnf logger.Logf, st *ipnstate.Status, goos string) (*ipn.Prefs, error) {
routeMap := map[netaddr.IPPrefix]bool{}
var default4, default6 bool
if upArgs.advertiseRoutes != "" {
advroutes := strings.Split(upArgs.advertiseRoutes, ",")
for _, s := range advroutes {
ipp, err := netaddr.ParseIPPrefix(s)
if err != nil {
fatalf("%q is not a valid IP address or CIDR prefix", s)
return nil, fmt.Errorf("%q is not a valid IP address or CIDR prefix", s)
}
if ipp != ipp.Masked() {
fatalf("%s has non-address bits set; expected %s", ipp, ipp.Masked())
return nil, fmt.Errorf("%s has non-address bits set; expected %s", ipp, ipp.Masked())
}
if ipp == ipv4default {
default4 = true
} else if ipp == ipv6default {
default6 = true
}
routeMap[ipp] = true
}
if default4 && !default6 {
return nil, fmt.Errorf("%s advertised without its IPv6 counterpart, please also advertise %s", ipv4default, ipv6default)
} else if default6 && !default4 {
return nil, fmt.Errorf("%s advertised without its IPv6 counterpart, please also advertise %s", ipv6default, ipv4default)
}
}
if upArgs.advertiseDefaultRoute {
routeMap[netaddr.MustParseIPPrefix("0.0.0.0/0")] = true
routeMap[netaddr.MustParseIPPrefix("::/0")] = true
}
routes := make([]netaddr.IPPrefix, 0, len(routeMap))
for r := range routeMap {
routes = append(routes, r)
}
sort.Slice(routes, func(i, j int) bool {
if routes[i].Bits != routes[j].Bits {
return routes[i].Bits < routes[j].Bits
}
return routes[i].IP.Less(routes[j].IP)
})
var exitNodeIP netaddr.IP
if upArgs.exitNodeIP != "" {
var err error
exitNodeIP, err = netaddr.ParseIP(upArgs.exitNodeIP)
if err != nil {
return nil, fmt.Errorf("invalid IP address %q for --exit-node: %v", upArgs.exitNodeIP, err)
}
} else if upArgs.exitNodeAllowLANAccess {
return nil, fmt.Errorf("--exit-node-allow-lan-access can only be used with --exit-node")
}
if upArgs.exitNodeIP != "" {
for _, ip := range st.TailscaleIPs {
if exitNodeIP == ip {
return nil, fmt.Errorf("cannot use %s as the exit node as it is a local IP address to this machine, did you mean --advertise-exit-node?", upArgs.exitNodeIP)
}
routes = append(routes, ipp)
}
checkIPForwarding()
}
var tags []string
@@ -160,20 +194,21 @@ func runUp(ctx context.Context, args []string) error {
for _, tag := range tags {
err := tailcfg.CheckTag(tag)
if err != nil {
fatalf("tag: %q: %s", tag, err)
return nil, fmt.Errorf("tag: %q: %s", tag, err)
}
}
}
if len(upArgs.hostname) > 256 {
fatalf("hostname too long: %d bytes (max 256)", len(upArgs.hostname))
return nil, fmt.Errorf("hostname too long: %d bytes (max 256)", len(upArgs.hostname))
}
// TODO(apenwarr): fix different semantics between prefs and uflags
prefs := ipn.NewPrefs()
prefs.ControlURL = upArgs.server
prefs.WantRunning = true
prefs.RouteAll = upArgs.acceptRoutes
prefs.ExitNodeIP = exitNodeIP
prefs.ExitNodeAllowLANAccess = upArgs.exitNodeAllowLANAccess
prefs.CorpDNS = upArgs.acceptDNS
prefs.AllowSingleHosts = upArgs.singleRoutes
prefs.ShieldsUp = upArgs.shieldsUp
@@ -181,90 +216,357 @@ func runUp(ctx context.Context, args []string) error {
prefs.AdvertiseTags = tags
prefs.NoSNAT = !upArgs.snat
prefs.Hostname = upArgs.hostname
prefs.ForceDaemon = (runtime.GOOS == "windows")
prefs.ForceDaemon = upArgs.forceDaemon
prefs.OperatorUser = upArgs.opUser
if runtime.GOOS == "linux" {
if goos == "linux" {
switch upArgs.netfilterMode {
case "on":
prefs.NetfilterMode = router.NetfilterOn
prefs.NetfilterMode = preftype.NetfilterOn
case "nodivert":
prefs.NetfilterMode = router.NetfilterNoDivert
prefs.NetfilterMode = preftype.NetfilterNoDivert
warnf("netfilter=nodivert; add iptables calls to ts-* chains manually.")
case "off":
prefs.NetfilterMode = router.NetfilterOff
prefs.NetfilterMode = preftype.NetfilterOff
warnf("netfilter=off; configure iptables yourself.")
default:
fatalf("invalid value --netfilter-mode: %q", upArgs.netfilterMode)
return nil, fmt.Errorf("invalid value --netfilter-mode=%q", upArgs.netfilterMode)
}
}
return prefs, nil
}
func runUp(ctx context.Context, args []string) error {
if len(args) > 0 {
fatalf("too many non-flag arguments: %q", args)
}
st, err := tailscale.Status(ctx)
if err != nil {
fatalf("can't fetch status from tailscaled: %v", err)
}
if distro.Get() == distro.Synology {
notSupported := "not yet supported on Synology; see https://github.com/tailscale/tailscale/issues/451"
if upArgs.acceptRoutes {
return errors.New("--accept-routes is " + notSupported)
}
if upArgs.exitNodeIP != "" {
return errors.New("--exit-node is " + notSupported)
}
if upArgs.netfilterMode != "off" {
return errors.New("--netfilter-mode values besides \"off\" " + notSupported)
}
}
c, bc, ctx, cancel := connect(ctx)
prefs, err := prefsFromUpArgs(upArgs, warnf, st, runtime.GOOS)
if err != nil {
fatalf("%s", err)
}
if len(prefs.AdvertiseRoutes) > 0 {
if err := tailscale.CheckIPForwarding(context.Background()); err != nil {
warnf("%v", err)
}
}
curPrefs, err := tailscale.GetPrefs(ctx)
if err != nil {
return err
}
flagSet := map[string]bool{}
mp := new(ipn.MaskedPrefs)
mp.WantRunningSet = true
mp.Prefs = *prefs
upFlagSet.Visit(func(f *flag.Flag) {
updateMaskedPrefsFromUpFlag(mp, f.Name)
flagSet[f.Name] = true
})
if !upArgs.reset {
if err := checkForAccidentalSettingReverts(flagSet, curPrefs, mp); err != nil {
fatalf("%s", err)
}
}
controlURLChanged := curPrefs.ControlURL != prefs.ControlURL
if controlURLChanged && st.BackendState == ipn.Running.String() && !upArgs.forceReauth {
fatalf("can't change --login-server without --force-reauth")
}
// If we're already running and none of the flags require a
// restart, we can just do an EditPrefs call and change the
// prefs at runtime (e.g. changing hostname, changinged
// advertised tags, routes, etc)
justEdit := st.BackendState == ipn.Running.String() &&
!upArgs.forceReauth &&
!upArgs.reset &&
upArgs.authKey == "" &&
!controlURLChanged
if justEdit {
_, err := tailscale.EditPrefs(ctx, mp)
return err
}
// simpleUp is whether we're running a simple "tailscale up"
// to transition to running from a previously-logged-in but
// down state, without changing any settings.
simpleUp := len(flagSet) == 0 && curPrefs.Persist != nil && curPrefs.Persist.LoginName != ""
// At this point we need to subscribe to the IPN bus to watch
// for state transitions and possible need to authenticate.
c, bc, pumpCtx, cancel := connect(ctx)
defer cancel()
var printed bool
startingOrRunning := make(chan bool, 1) // gets value once starting or running
gotEngineUpdate := make(chan bool, 1) // gets value upon an engine update
go pump(pumpCtx, bc, c)
printed := !simpleUp
var loginOnce sync.Once
startLoginInteractive := func() { loginOnce.Do(func() { bc.StartLoginInteractive() }) }
bc.SetPrefs(prefs)
opts := ipn.Options{
StateKey: ipn.GlobalDaemonStateKey,
AuthKey: upArgs.authKey,
Notify: func(n ipn.Notify) {
if n.ErrMessage != nil {
fatalf("backend error: %v\n", *n.ErrMessage)
bc.SetNotifyCallback(func(n ipn.Notify) {
if n.Engine != nil {
select {
case gotEngineUpdate <- true:
default:
}
if s := n.State; s != nil {
switch *s {
case ipn.NeedsLogin:
printed = true
startLoginInteractive()
case ipn.NeedsMachineAuth:
printed = true
fmt.Fprintf(os.Stderr, "\nTo authorize your machine, visit (as admin):\n\n\t%s/admin/machines\n\n", upArgs.server)
case ipn.Starting, ipn.Running:
// Done full authentication process
if printed {
// Only need to print an update if we printed the "please click" message earlier.
fmt.Fprintf(os.Stderr, "Success.\n")
}
cancel()
}
if n.ErrMessage != nil {
msg := *n.ErrMessage
if msg == ipn.ErrMsgPermissionDenied {
switch runtime.GOOS {
case "windows":
msg += " (Tailscale service in use by other user?)"
default:
msg += " (try 'sudo tailscale up [...]')"
}
}
if url := n.BrowseToURL; url != nil {
fmt.Fprintf(os.Stderr, "\nTo authenticate, visit:\n\n\t%s\n\n", *url)
fatalf("backend error: %v\n", msg)
}
if s := n.State; s != nil {
switch *s {
case ipn.NeedsLogin:
printed = true
startLoginInteractive()
case ipn.NeedsMachineAuth:
printed = true
fmt.Fprintf(os.Stderr, "\nTo authorize your machine, visit (as admin):\n\n\t%s/admin/machines\n\n", upArgs.server)
case ipn.Starting, ipn.Running:
// Done full authentication process
if printed {
// Only need to print an update if we printed the "please click" message earlier.
fmt.Fprintf(os.Stderr, "Success.\n")
}
select {
case startingOrRunning <- true:
default:
}
cancel()
}
},
}
if url := n.BrowseToURL; url != nil {
printed = true
fmt.Fprintf(os.Stderr, "\nTo authenticate, visit:\n\n\t%s\n\n", *url)
}
})
// Wait for backend client to be connected so we know
// we're subscribed to updates. Otherwise we can miss
// an update upon its transition to running. Do so by causing some traffic
// back to the bus that we then wait on.
bc.RequestEngineStatus()
select {
case <-gotEngineUpdate:
case <-pumpCtx.Done():
return pumpCtx.Err()
}
// On Windows, we still run in mostly the "legacy" way that
// predated the server's StateStore. That is, we send an empty
// StateKey and send the prefs directly. Although the Windows
// supports server mode, though, the transition to StateStore
// is only half complete. Only server mode uses it, and the
// Windows service (~tailscaled) is the one that computes the
// StateKey based on the connection idenity. So for now, just
// do as the Windows GUI's always done:
if runtime.GOOS == "windows" {
// The Windows service will set this as needed based
// on our connection's identity.
opts.StateKey = ""
opts.Prefs = prefs
}
// Special case: bare "tailscale up" means to just start
// running, if there's ever been a login.
if simpleUp {
_, err := tailscale.EditPrefs(ctx, &ipn.MaskedPrefs{
Prefs: ipn.Prefs{
WantRunning: true,
},
WantRunningSet: true,
})
if err != nil {
return err
}
} else {
bc.SetPrefs(prefs)
// We still have to Start right now because it's the only way to
// set up notifications and whatnot. This causes a bunch of churn
// every time the CLI touches anything.
//
// TODO(danderson): redo the frontend/backend API to assume
// ephemeral frontends that read/modify/write state, once
// Windows/Mac state is moved into backend.
bc.Start(opts)
if upArgs.forceReauth {
printed = true
opts := ipn.Options{
StateKey: ipn.GlobalDaemonStateKey,
AuthKey: upArgs.authKey,
}
// On Windows, we still run in mostly the "legacy" way that
// predated the server's StateStore. That is, we send an empty
// StateKey and send the prefs directly. Although the Windows
// supports server mode, though, the transition to StateStore
// is only half complete. Only server mode uses it, and the
// Windows service (~tailscaled) is the one that computes the
// StateKey based on the connection identity. So for now, just
// do as the Windows GUI's always done:
if runtime.GOOS == "windows" {
// The Windows service will set this as needed based
// on our connection's identity.
opts.StateKey = ""
opts.Prefs = prefs
}
bc.Start(opts)
startLoginInteractive()
}
pump(ctx, bc, c)
return nil
select {
case <-startingOrRunning:
return nil
case <-pumpCtx.Done():
select {
case <-startingOrRunning:
return nil
default:
}
return pumpCtx.Err()
}
}
var (
flagForPref = map[string]string{} // "ExitNodeIP" => "exit-node"
prefsOfFlag = map[string][]string{}
)
func init() {
addPrefFlagMapping("accept-dns", "CorpDNS")
addPrefFlagMapping("accept-routes", "RouteAll")
addPrefFlagMapping("advertise-routes", "AdvertiseRoutes")
addPrefFlagMapping("advertise-tags", "AdvertiseTags")
addPrefFlagMapping("host-routes", "AllowSingleHosts")
addPrefFlagMapping("hostname", "Hostname")
addPrefFlagMapping("login-server", "ControlURL")
addPrefFlagMapping("netfilter-mode", "NetfilterMode")
addPrefFlagMapping("shields-up", "ShieldsUp")
addPrefFlagMapping("snat-subnet-routes", "NoSNAT")
addPrefFlagMapping("exit-node", "ExitNodeIP", "ExitNodeIP")
addPrefFlagMapping("exit-node-allow-lan-access", "ExitNodeAllowLANAccess")
addPrefFlagMapping("unattended", "ForceDaemon")
addPrefFlagMapping("operator", "OperatorUser")
}
func addPrefFlagMapping(flagName string, prefNames ...string) {
prefsOfFlag[flagName] = prefNames
prefType := reflect.TypeOf(ipn.Prefs{})
for _, pref := range prefNames {
flagForPref[pref] = flagName
// Crash at runtime if there's a typo in the prefName.
if _, ok := prefType.FieldByName(pref); !ok {
panic(fmt.Sprintf("invalid ipn.Prefs field %q", pref))
}
}
}
func updateMaskedPrefsFromUpFlag(mp *ipn.MaskedPrefs, flagName string) {
if prefs, ok := prefsOfFlag[flagName]; ok {
for _, pref := range prefs {
reflect.ValueOf(mp).Elem().FieldByName(pref + "Set").SetBool(true)
}
return
}
switch flagName {
case "authkey", "force-reauth", "reset":
// Not pref-related flags.
case "advertise-exit-node":
// This pref is a shorthand for advertise-routes.
default:
panic(fmt.Sprintf("internal error: unhandled flag %q", flagName))
}
}
// checkForAccidentalSettingReverts checks for people running
// "tailscale up" with a subset of the flags they originally ran it
// with.
//
// For example, in Tailscale 1.6 and prior, a user might've advertised
// a tag, but later tried to change just one other setting and forgot
// to mention the tag later and silently wiped it out. We now
// require --reset to change preferences to flag default values when
// the flag is not mentioned on the command line.
//
// curPrefs is what's currently active on the server.
//
// mp is the mask of settings actually set, where mp.Prefs is the new
// preferences to set, including any values set from implicit flags.
func checkForAccidentalSettingReverts(flagSet map[string]bool, curPrefs *ipn.Prefs, mp *ipn.MaskedPrefs) error {
if len(flagSet) == 0 {
// A bare "tailscale up" is a special case to just
// mean bringing the network up without any changes.
return nil
}
if curPrefs.ControlURL == "" {
// Don't validate things on initial "up" before a control URL has been set.
return nil
}
curWithExplicitEdits := curPrefs.Clone()
curWithExplicitEdits.ApplyEdits(mp)
prefType := reflect.TypeOf(ipn.Prefs{})
// Explicit values (current + explicit edit):
ev := reflect.ValueOf(curWithExplicitEdits).Elem()
// Implicit values (what we'd get if we replaced everything with flag defaults):
iv := reflect.ValueOf(&mp.Prefs).Elem()
var errs []error
var didExitNodeErr bool
for i := 0; i < prefType.NumField(); i++ {
prefName := prefType.Field(i).Name
if prefName == "Persist" {
continue
}
flagName, hasFlag := flagForPref[prefName]
if hasFlag && flagSet[flagName] {
continue
}
// Get explicit value and implicit value
ex, im := ev.Field(i), iv.Field(i)
switch ex.Kind() {
case reflect.String, reflect.Slice:
if ex.Kind() == reflect.Slice && ex.Len() == 0 && im.Len() == 0 {
// Treat nil and non-nil empty slices as equivalent.
continue
}
}
exi, imi := ex.Interface(), im.Interface()
if reflect.DeepEqual(exi, imi) {
continue
}
switch flagName {
case "":
errs = append(errs, fmt.Errorf("'tailscale up' without --reset requires all preferences with changing values to be explicitly mentioned; this command would change the value of flagless pref %q", prefName))
case "exit-node":
if !didExitNodeErr {
didExitNodeErr = true
errs = append(errs, errors.New("'tailscale up' without --reset requires all preferences with changing values to be explicitly mentioned; --exit-node is not specified but an exit node is currently configured"))
}
default:
errs = append(errs, fmt.Errorf("'tailscale up' without --reset requires all preferences with changing values to be explicitly mentioned; --%s is not specified but its default value of %v differs from current value %v",
flagName, fmtSettingVal(imi), fmtSettingVal(exi)))
}
}
return multierror.New(errs)
}
func fmtSettingVal(v interface{}) string {
switch v := v.(type) {
case bool:
return strconv.FormatBool(v)
case string, preftype.NetfilterMode:
return fmt.Sprintf("%q", v)
case []string:
return strings.Join(v, ",")
}
return fmt.Sprint(v)
}

View File

@@ -11,7 +11,7 @@ import (
"log"
"github.com/peterbourgon/ff/v2/ffcli"
"tailscale.com/ipn"
"tailscale.com/client/tailscale"
"tailscale.com/version"
)
@@ -42,29 +42,10 @@ func runVersion(ctx context.Context, args []string) error {
fmt.Printf("Client: %s\n", version.String())
c, bc, ctx, cancel := connect(ctx)
defer cancel()
bc.AllowVersionSkew = true
done := make(chan struct{})
bc.SetNotifyCallback(func(n ipn.Notify) {
if n.ErrMessage != nil {
log.Fatal(*n.ErrMessage)
}
if n.Status != nil {
fmt.Printf("Daemon: %s\n", n.Version)
close(done)
}
})
go pump(ctx, bc, c)
bc.RequestStatus()
select {
case <-done:
return nil
case <-ctx.Done():
return ctx.Err()
st, err := tailscale.StatusWithoutPeers(ctx)
if err != nil {
return err
}
fmt.Printf("Daemon: %s\n", st.Version)
return nil
}

1337
cmd/tailscale/cli/web.css Normal file

File diff suppressed because it is too large Load Diff

293
cmd/tailscale/cli/web.go Normal file
View File

@@ -0,0 +1,293 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package cli
import (
"bytes"
"context"
_ "embed"
"encoding/json"
"flag"
"fmt"
"html/template"
"log"
"net/http"
"net/http/cgi"
"os/exec"
"runtime"
"strings"
"github.com/peterbourgon/ff/v2/ffcli"
"tailscale.com/client/tailscale"
"tailscale.com/ipn"
"tailscale.com/tailcfg"
"tailscale.com/types/preftype"
"tailscale.com/version/distro"
)
//go:embed web.html
var webHTML string
//go:embed web.css
var webCSS string
var tmpl *template.Template
func init() {
tmpl = template.Must(template.New("web.html").Parse(webHTML))
template.Must(tmpl.New("web.css").Parse(webCSS))
}
type tmplData struct {
Profile tailcfg.UserProfile
SynologyUser string
Status string
DeviceName string
IP string
}
var webCmd = &ffcli.Command{
Name: "web",
ShortUsage: "web [flags]",
ShortHelp: "Run a web server for controlling Tailscale",
FlagSet: (func() *flag.FlagSet {
webf := flag.NewFlagSet("web", flag.ExitOnError)
webf.StringVar(&webArgs.listen, "listen", "localhost:8088", "listen address; use port 0 for automatic")
webf.BoolVar(&webArgs.cgi, "cgi", false, "run as CGI script")
return webf
})(),
Exec: runWeb,
}
var webArgs struct {
listen string
cgi bool
}
func runWeb(ctx context.Context, args []string) error {
if len(args) > 0 {
log.Fatalf("too many non-flag arguments: %q", args)
}
if webArgs.cgi {
return cgi.Serve(http.HandlerFunc(webHandler))
}
return http.ListenAndServe(webArgs.listen, http.HandlerFunc(webHandler))
}
func auth() (string, error) {
if distro.Get() == distro.Synology {
cmd := exec.Command("/usr/syno/synoman/webman/modules/authenticate.cgi")
out, err := cmd.CombinedOutput()
if err != nil {
return "", fmt.Errorf("auth: %v: %s", err, out)
}
return string(out), nil
}
return "", nil
}
func synoTokenRedirect(w http.ResponseWriter, r *http.Request) bool {
if distro.Get() != distro.Synology {
return false
}
if r.Header.Get("X-Syno-Token") != "" {
return false
}
if r.URL.Query().Get("SynoToken") != "" {
return false
}
if r.Method == "POST" && r.FormValue("SynoToken") != "" {
return false
}
// We need a SynoToken for authenticate.cgi.
// So we tell the client to get one.
serverURL := r.URL.Scheme + "://" + r.URL.Host
fmt.Fprintf(w, synoTokenRedirectHTML, serverURL)
return true
}
const synoTokenRedirectHTML = `<html><body>
Redirecting with session token...
<script>
var serverURL = %q;
var req = new XMLHttpRequest();
req.overrideMimeType("application/json");
req.open("GET", serverURL + "/webman/login.cgi", true);
req.onload = function() {
var jsonResponse = JSON.parse(req.responseText);
var token = jsonResponse["SynoToken"];
document.location.href = serverURL + "/webman/3rdparty/Tailscale/?SynoToken=" + token;
};
req.send(null);
</script>
</body></html>
`
const authenticationRedirectHTML = `
<html>
<head>
<title>Redirecting...</title>
<style>
html,
body {
height: 100%;
}
html {
background-color: rgb(249, 247, 246);
font-family: ui-sans-serif, system-ui, -apple-system, BlinkMacSystemFont, "Segoe UI", Roboto, "Helvetica Neue", Arial, "Noto Sans", sans-serif, "Apple Color Emoji", "Segoe UI Emoji", "Segoe UI Symbol", "Noto Color Emoji";
line-height: 1.5;
-webkit-text-size-adjust: 100%;
-webkit-font-smoothing: antialiased;
-moz-osx-font-smoothing: grayscale;
}
body {
display: flex;
flex-direction: column;
align-items: center;
justify-content: center;
}
.spinner {
margin-bottom: 2rem;
border: 4px rgba(112, 110, 109, 0.5) solid;
border-left-color: transparent;
border-radius: 9999px;
width: 4rem;
height: 4rem;
-webkit-animation: spin 700ms linear infinite;
animation: spin 800ms linear infinite;
}
.label {
color: rgb(112, 110, 109);
padding-left: 0.4rem;
}
@-webkit-keyframes spin {
to {
transform: rotate(360deg);
}
}
@keyframes spin {
to {
transform: rotate(360deg);
}
}
</style>
</head>
<body>
<div class="spinner"></div>
<div class="label">Redirecting...</div>
</body>
`
func webHandler(w http.ResponseWriter, r *http.Request) {
if synoTokenRedirect(w, r) {
return
}
user, err := auth()
if err != nil {
http.Error(w, err.Error(), http.StatusForbidden)
return
}
if r.URL.Path == "/redirect" || r.URL.Path == "/redirect/" {
w.Write([]byte(authenticationRedirectHTML))
return
}
if r.Method == "POST" {
type mi map[string]interface{}
w.Header().Set("Content-Type", "application/json")
url, err := tailscaleUp(r.Context())
if err != nil {
json.NewEncoder(w).Encode(mi{"error": err})
return
}
json.NewEncoder(w).Encode(mi{"url": url})
return
}
st, err := tailscale.Status(r.Context())
if err != nil {
http.Error(w, err.Error(), 500)
return
}
profile := st.User[st.Self.UserID]
deviceName := strings.Split(st.Self.DNSName, ".")[0]
data := tmplData{
SynologyUser: user,
Profile: profile,
Status: st.BackendState,
DeviceName: deviceName,
}
if len(st.TailscaleIPs) != 0 {
data.IP = st.TailscaleIPs[0].String()
}
buf := new(bytes.Buffer)
if err := tmpl.Execute(buf, data); err != nil {
http.Error(w, err.Error(), 500)
return
}
w.Write(buf.Bytes())
}
// TODO(crawshaw): some of this is very similar to the code in 'tailscale up', can we share anything?
func tailscaleUp(ctx context.Context) (authURL string, retErr error) {
prefs := ipn.NewPrefs()
prefs.ControlURL = ipn.DefaultControlURL
prefs.WantRunning = true
prefs.CorpDNS = true
prefs.AllowSingleHosts = true
prefs.ForceDaemon = (runtime.GOOS == "windows")
if distro.Get() == distro.Synology {
prefs.NetfilterMode = preftype.NetfilterOff
}
c, bc, ctx, cancel := connect(ctx)
defer cancel()
bc.SetNotifyCallback(func(n ipn.Notify) {
if n.ErrMessage != nil {
msg := *n.ErrMessage
if msg == ipn.ErrMsgPermissionDenied {
switch runtime.GOOS {
case "windows":
msg += " (Tailscale service in use by other user?)"
default:
msg += " (try 'sudo tailscale up [...]')"
}
}
retErr = fmt.Errorf("backend error: %v", msg)
cancel()
} else if url := n.BrowseToURL; url != nil {
authURL = *url
cancel()
}
})
bc.SetPrefs(prefs)
bc.Start(ipn.Options{
StateKey: ipn.GlobalDaemonStateKey,
})
bc.StartLoginInteractive()
pump(ctx, bc, c)
if authURL == "" && retErr == nil {
return "", fmt.Errorf("login failed with no backend error message")
}
return authURL, retErr
}

150
cmd/tailscale/cli/web.html Normal file
View File

@@ -0,0 +1,150 @@
<!doctype html>
<html class="bg-gray-50">
<head>
<meta charset="utf-8" />
<meta name="viewport" content="width=device-width, initial-scale=1" />
<link rel="shortcut icon"
href="data:image/png;base64,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" />
<title>Tailscale</title>
<style>{{template "web.css"}}</style>
</head>
<body class="py-14">
<main class="container max-w-lg mx-auto py-6 px-8 bg-white rounded-md shadow-2xl" style="width: 95%">
<header class="flex justify-between items-center min-width-0 py-2 mb-8">
<svg width="26" height="26" viewBox="0 0 23 23" title="Tailscale" fill="none" xmlns="http://www.w3.org/2000/svg"
class="flex-shrink-0 mr-4">
<circle opacity="0.2" cx="3.4" cy="3.25" r="2.7" fill="currentColor"></circle>
<circle cx="3.4" cy="11.3" r="2.7" fill="currentColor"></circle>
<circle opacity="0.2" cx="3.4" cy="19.5" r="2.7" fill="currentColor"></circle>
<circle cx="11.5" cy="11.3" r="2.7" fill="currentColor"></circle>
<circle cx="11.5" cy="19.5" r="2.7" fill="currentColor"></circle>
<circle opacity="0.2" cx="11.5" cy="3.25" r="2.7" fill="currentColor"></circle>
<circle opacity="0.2" cx="19.5" cy="3.25" r="2.7" fill="currentColor"></circle>
<circle cx="19.5" cy="11.3" r="2.7" fill="currentColor"></circle>
<circle opacity="0.2" cx="19.5" cy="19.5" r="2.7" fill="currentColor"></circle>
</svg>
<div class="flex items-center justify-end space-x-2 w-2/3">
{{ with .Profile.LoginName }}
<div class="text-right truncate leading-4">
<h4 class="truncate">{{.}}</h4>
<a href="#" class="text-xs text-gray-500 hover:text-gray-700 js-loginButton">Switch account</a>
</div>
{{ end }}
<div class="relative flex-shrink-0 w-8 h-8 rounded-full overflow-hidden">
{{ with .Profile.ProfilePicURL }}
<div class="w-8 h-8 flex pointer-events-none rounded-full bg-gray-200"
style="background-image: url('{{.}}'); background-size: cover;"></div>
{{ else }}
<div class="w-8 h-8 flex pointer-events-none rounded-full border border-gray-400 border-dashed"></div>
{{ end }}
</div>
</div>
</header>
{{ if .IP }}
<div
class="border border-gray-200 bg-gray-0 rounded-lg p-2 pl-3 pr-3 mb-8 width-full flex items-center justify-between">
<div class="flex items-center min-width-0">
<svg class="flex-shrink-0 text-gray-600 mr-3 ml-1" xmlns="http://www.w3.org/2000/svg" width="20" height="20"
viewBox="0 0 24 24" fill="none" stroke="currentColor" stroke-width="2" stroke-linecap="round"
stroke-linejoin="round">
<rect x="2" y="2" width="20" height="8" rx="2" ry="2"></rect>
<rect x="2" y="14" width="20" height="8" rx="2" ry="2"></rect>
<line x1="6" y1="6" x2="6.01" y2="6"></line>
<line x1="6" y1="18" x2="6.01" y2="18"></line>
</svg>
<h4 class="font-semibold truncate mr-2">{{.DeviceName}}</h4>
</div>
<h5>{{.IP}}</h5>
</div>
{{ end }}
{{ if or (eq .Status "NeedsLogin") (eq .Status "NoState") }}
{{ if .IP }}
<div class="mb-6">
<p class="text-gray-700">Your device's key has expired. Reauthenticate this device by logging in again, or <a
href="https://tailscale.com/kb/1028/key-expiry" class="link" target="_blank">learn more</a>.</p>
</div>
<a href="#" class="mb-4 js-loginButton" target="_blank">
<button class="button button-blue w-full">Reauthenticate</button>
</a>
{{ else }}
<div class="mb-6">
<h3 class="text-3xl font-semibold mb-3">Log in</h3>
<p class="text-gray-700">Get started by logging in to your Tailscale network. Or,&nbsp;learn&nbsp;more at <a
href="https://tailscale.com/" class="link" target="_blank">tailscale.com</a>.</p>
</div>
<a href="#" class="mb-4 js-loginButton" target="_blank">
<button class="button button-blue w-full">Log In</button>
</a>
{{ end }}
{{ else if eq .Status "NeedsMachineAuth" }}
<div class="mb-4">
This device is authorized, but needs approval from a network admin before it can connect to the network.
</div>
{{ else }}
<div class="mb-4">
<p>You are connected! Access this device over Tailscale using the device name or IP address above.</p>
</div>
<a href="#" class="mb-4 link font-medium js-loginButton" target="_blank">Reauthenticate</a>
{{ end }}
</main>
<script>
(function () {
let loginButtons = document.querySelectorAll(".js-loginButton");
let fetchingUrl = false;
function handleClick(e) {
e.preventDefault();
if (fetchingUrl) {
return;
}
fetchingUrl = true;
const urlParams = new URLSearchParams(window.location.search);
const token = urlParams.get("SynoToken");
const nextParams = new URLSearchParams({ up: true });
if (token) {
nextParams.set("SynoToken", token)
}
const nextUrl = new URL(window.location);
nextUrl.search = nextParams.toString()
const url = nextUrl.toString();
const tab = window.open("/redirect", "_blank");
fetch(url, {
method: "POST",
headers: {
"Accept": "application/json",
"Content-Type": "application/json",
}
}).then(res => res.json()).then(res => {
fetchingUrl = false;
const err = res["error"];
if (err) {
throw new Error(err);
}
const url = res["url"];
if (url) {
authUrl = url;
tab.location = url;
tab.focus();
} else {
location.reload();
}
}).catch(err => {
tab.close();
alert("Failed to log in: " + err.message);
});
}
Array.from(loginButtons).forEach(el => {
el.addEventListener("click", handleClick);
})
})();
</script>
</body>
</html>

View File

@@ -2,123 +2,85 @@ tailscale.com/cmd/tailscale dependencies: (generated by github.com/tailscale/dep
W 💣 github.com/alexbrainman/sspi from github.com/alexbrainman/sspi/negotiate
W 💣 github.com/alexbrainman/sspi/negotiate from tailscale.com/net/tshttpproxy
github.com/apenwarr/fixconsole from tailscale.com/cmd/tailscale
W 💣 github.com/apenwarr/w32 from github.com/apenwarr/fixconsole
L github.com/coreos/go-iptables/iptables from tailscale.com/wgengine/router
LW github.com/go-multierror/multierror from tailscale.com/wgengine/router
W 💣 github.com/go-ole/go-ole from github.com/go-ole/go-ole/oleutil+
W 💣 github.com/go-ole/go-ole/oleutil from tailscale.com/wgengine/winnet
L 💣 github.com/godbus/dbus/v5 from tailscale.com/wgengine/router/dns
github.com/golang/groupcache/lru from tailscale.com/wgengine/filter+
L 💣 github.com/jsimonetti/rtnetlink from tailscale.com/wgengine/monitor
L github.com/jsimonetti/rtnetlink/internal/unix from github.com/jsimonetti/rtnetlink
L 💣 github.com/mdlayher/netlink from github.com/jsimonetti/rtnetlink+
L 💣 github.com/mdlayher/netlink/nlenc from github.com/jsimonetti/rtnetlink+
L github.com/mdlayher/sdnotify from tailscale.com/util/systemd
github.com/go-multierror/multierror from tailscale.com/cmd/tailscale/cli
github.com/peterbourgon/ff/v2 from github.com/peterbourgon/ff/v2/ffcli
github.com/peterbourgon/ff/v2/ffcli from tailscale.com/cmd/tailscale/cli
💣 github.com/tailscale/wireguard-go/conn from github.com/tailscale/wireguard-go/device+
💣 github.com/tailscale/wireguard-go/device from tailscale.com/wgengine+
github.com/tailscale/wireguard-go/device/tokenbucket from github.com/tailscale/wireguard-go/device
💣 github.com/tailscale/wireguard-go/ipc from github.com/tailscale/wireguard-go/device
W 💣 github.com/tailscale/wireguard-go/ipc/winpipe from github.com/tailscale/wireguard-go/ipc
github.com/tailscale/wireguard-go/ratelimiter from github.com/tailscale/wireguard-go/device
github.com/tailscale/wireguard-go/replay from github.com/tailscale/wireguard-go/device
github.com/tailscale/wireguard-go/rwcancel from github.com/tailscale/wireguard-go/device+
github.com/tailscale/wireguard-go/tai64n from github.com/tailscale/wireguard-go/device
💣 github.com/tailscale/wireguard-go/tun from github.com/tailscale/wireguard-go/device+
W 💣 github.com/tailscale/wireguard-go/tun/wintun from github.com/tailscale/wireguard-go/tun
github.com/tailscale/wireguard-go/wgcfg from github.com/tailscale/wireguard-go/conn+
github.com/tcnksm/go-httpstat from tailscale.com/net/netcheck
github.com/toqueteos/webbrowser from tailscale.com/cmd/tailscale/cli
💣 go4.org/intern from inet.af/netaddr
💣 go4.org/mem from tailscale.com/control/controlclient+
💣 go4.org/mem from tailscale.com/derp+
go4.org/unsafe/assume-no-moving-gc from go4.org/intern
W 💣 golang.zx2c4.com/wireguard/windows/tunnel/winipcfg from tailscale.com/net/interfaces+
inet.af/netaddr from tailscale.com/cmd/tailscale/cli+
rsc.io/goversion/version from tailscale.com/version
tailscale.com/atomicfile from tailscale.com/ipn+
tailscale.com/atomicfile from tailscale.com/ipn
tailscale.com/client/tailscale from tailscale.com/cmd/tailscale/cli
tailscale.com/client/tailscale/apitype from tailscale.com/client/tailscale
tailscale.com/cmd/tailscale/cli from tailscale.com/cmd/tailscale
tailscale.com/control/controlclient from tailscale.com/ipn+
tailscale.com/derp from tailscale.com/derp/derphttp+
tailscale.com/derp/derphttp from tailscale.com/cmd/tailscale/cli+
tailscale.com/derp from tailscale.com/derp/derphttp
tailscale.com/derp/derphttp from tailscale.com/net/netcheck
tailscale.com/derp/derpmap from tailscale.com/cmd/tailscale/cli
tailscale.com/disco from tailscale.com/derp+
tailscale.com/internal/deepprint from tailscale.com/ipn+
tailscale.com/ipn from tailscale.com/cmd/tailscale/cli
tailscale.com/disco from tailscale.com/derp
tailscale.com/ipn from tailscale.com/cmd/tailscale/cli+
tailscale.com/ipn/ipnstate from tailscale.com/cmd/tailscale/cli+
tailscale.com/ipn/policy from tailscale.com/ipn
tailscale.com/log/logheap from tailscale.com/control/controlclient
tailscale.com/logtail/backoff from tailscale.com/control/controlclient+
tailscale.com/metrics from tailscale.com/derp
tailscale.com/net/dnscache from tailscale.com/control/controlclient+
tailscale.com/net/dnscache from tailscale.com/derp/derphttp
tailscale.com/net/flowtrack from tailscale.com/wgengine/filter+
💣 tailscale.com/net/interfaces from tailscale.com/cmd/tailscale/cli+
tailscale.com/net/netcheck from tailscale.com/cmd/tailscale/cli+
tailscale.com/net/netns from tailscale.com/control/controlclient+
tailscale.com/net/packet from tailscale.com/wgengine+
tailscale.com/net/stun from tailscale.com/net/netcheck+
tailscale.com/net/tlsdial from tailscale.com/control/controlclient+
tailscale.com/net/tsaddr from tailscale.com/ipn+
💣 tailscale.com/net/tshttpproxy from tailscale.com/cmd/tailscale/cli+
tailscale.com/paths from tailscale.com/cmd/tailscale/cli
tailscale.com/portlist from tailscale.com/ipn
tailscale.com/safesocket from tailscale.com/cmd/tailscale/cli
💣 tailscale.com/syncs from tailscale.com/net/interfaces+
tailscale.com/net/netcheck from tailscale.com/cmd/tailscale/cli
tailscale.com/net/netns from tailscale.com/derp/derphttp+
tailscale.com/net/packet from tailscale.com/wgengine/filter
tailscale.com/net/portmapper from tailscale.com/net/netcheck+
tailscale.com/net/stun from tailscale.com/net/netcheck
tailscale.com/net/tlsdial from tailscale.com/derp/derphttp
tailscale.com/net/tsaddr from tailscale.com/net/interfaces
💣 tailscale.com/net/tshttpproxy from tailscale.com/derp/derphttp+
tailscale.com/paths from tailscale.com/cmd/tailscale/cli+
tailscale.com/safesocket from tailscale.com/cmd/tailscale/cli+
tailscale.com/syncs from tailscale.com/net/interfaces+
tailscale.com/tailcfg from tailscale.com/cmd/tailscale/cli+
W tailscale.com/tsconst from tailscale.com/net/interfaces
tailscale.com/types/empty from tailscale.com/control/controlclient+
tailscale.com/types/key from tailscale.com/cmd/tailscale/cli+
tailscale.com/types/empty from tailscale.com/ipn
tailscale.com/types/ipproto from tailscale.com/net/flowtrack+
tailscale.com/types/key from tailscale.com/derp+
tailscale.com/types/logger from tailscale.com/cmd/tailscale/cli+
tailscale.com/types/nettype from tailscale.com/wgengine/magicsock
tailscale.com/types/opt from tailscale.com/control/controlclient+
tailscale.com/types/netmap from tailscale.com/ipn
tailscale.com/types/opt from tailscale.com/net/netcheck+
tailscale.com/types/persist from tailscale.com/ipn
tailscale.com/types/preftype from tailscale.com/cmd/tailscale/cli+
tailscale.com/types/strbuilder from tailscale.com/net/packet
tailscale.com/types/structs from tailscale.com/control/controlclient+
tailscale.com/types/wgkey from tailscale.com/control/controlclient+
LW tailscale.com/util/endian from tailscale.com/net/netns+
tailscale.com/util/lineread from tailscale.com/control/controlclient+
tailscale.com/util/systemd from tailscale.com/control/controlclient+
tailscale.com/types/structs from tailscale.com/ipn+
tailscale.com/types/wgkey from tailscale.com/types/netmap+
tailscale.com/util/dnsname from tailscale.com/cmd/tailscale/cli+
W tailscale.com/util/endian from tailscale.com/net/netns
L tailscale.com/util/lineread from tailscale.com/net/interfaces
tailscale.com/version from tailscale.com/cmd/tailscale/cli+
tailscale.com/version/distro from tailscale.com/cmd/tailscale/cli+
tailscale.com/wgengine from tailscale.com/ipn
tailscale.com/wgengine/filter from tailscale.com/control/controlclient+
tailscale.com/wgengine/magicsock from tailscale.com/wgengine
💣 tailscale.com/wgengine/monitor from tailscale.com/cmd/tailscale/cli+
tailscale.com/wgengine/router from tailscale.com/cmd/tailscale/cli+
tailscale.com/wgengine/router/dns from tailscale.com/ipn+
tailscale.com/wgengine/tsdns from tailscale.com/ipn+
tailscale.com/wgengine/tstun from tailscale.com/wgengine
W 💣 tailscale.com/wgengine/winnet from tailscale.com/wgengine/router
tailscale.com/version/distro from tailscale.com/cmd/tailscale/cli
tailscale.com/wgengine/filter from tailscale.com/types/netmap
golang.org/x/crypto/blake2b from golang.org/x/crypto/nacl/box
golang.org/x/crypto/blake2s from github.com/tailscale/wireguard-go/device
golang.org/x/crypto/chacha20 from golang.org/x/crypto/chacha20poly1305
golang.org/x/crypto/chacha20poly1305 from crypto/tls+
golang.org/x/crypto/cryptobyte from crypto/ecdsa+
golang.org/x/crypto/cryptobyte/asn1 from crypto/ecdsa+
golang.org/x/crypto/curve25519 from crypto/tls+
golang.org/x/crypto/hkdf from crypto/tls
golang.org/x/crypto/nacl/box from tailscale.com/control/controlclient+
golang.org/x/crypto/nacl/box from tailscale.com/derp
golang.org/x/crypto/nacl/secretbox from golang.org/x/crypto/nacl/box
golang.org/x/crypto/poly1305 from github.com/tailscale/wireguard-go/device+
golang.org/x/crypto/poly1305 from golang.org/x/crypto/chacha20poly1305+
golang.org/x/crypto/salsa20/salsa from golang.org/x/crypto/nacl/box+
golang.org/x/net/bpf from github.com/mdlayher/netlink+
golang.org/x/net/context/ctxhttp from golang.org/x/oauth2/internal
golang.org/x/net/dns/dnsmessage from net+
golang.org/x/net/http/httpguts from net/http
golang.org/x/net/dns/dnsmessage from net
golang.org/x/net/http/httpguts from net/http+
golang.org/x/net/http/httpproxy from net/http
golang.org/x/net/http2/hpack from net/http
golang.org/x/net/idna from golang.org/x/net/http/httpguts+
golang.org/x/net/ipv4 from github.com/tailscale/wireguard-go/device
golang.org/x/net/ipv6 from github.com/tailscale/wireguard-go/device+
golang.org/x/net/proxy from tailscale.com/net/netns
D golang.org/x/net/route from net
golang.org/x/oauth2 from tailscale.com/control/controlclient+
golang.org/x/oauth2/internal from golang.org/x/oauth2
D golang.org/x/net/route from net+
golang.org/x/sync/errgroup from tailscale.com/derp
golang.org/x/sync/singleflight from tailscale.com/net/dnscache
golang.org/x/sys/cpu from golang.org/x/crypto/blake2b+
LD golang.org/x/sys/unix from github.com/jsimonetti/rtnetlink/internal/unix+
W golang.org/x/sys/windows from github.com/apenwarr/fixconsole+
W golang.org/x/sys/windows/registry from golang.zx2c4.com/wireguard/windows/tunnel/winipcfg+
LD golang.org/x/sys/unix from tailscale.com/net/netns+
W golang.org/x/sys/windows from golang.org/x/sys/windows/registry+
W golang.org/x/sys/windows/registry from golang.zx2c4.com/wireguard/windows/tunnel/winipcfg
golang.org/x/text/secure/bidirule from golang.org/x/net/idna
golang.org/x/text/transform from golang.org/x/text/secure/bidirule+
golang.org/x/text/unicode/bidi from golang.org/x/net/idna+
@@ -127,7 +89,7 @@ tailscale.com/cmd/tailscale dependencies: (generated by github.com/tailscale/dep
bufio from compress/flate+
bytes from bufio+
compress/flate from compress/gzip+
compress/gzip from net/http+
compress/gzip from net/http
compress/zlib from debug/elf+
container/list from crypto/tls+
context from crypto/tls+
@@ -155,7 +117,8 @@ tailscale.com/cmd/tailscale dependencies: (generated by github.com/tailscale/dep
debug/elf from rsc.io/goversion/version
debug/macho from rsc.io/goversion/version
debug/pe from rsc.io/goversion/version
encoding from encoding/json+
embed from tailscale.com/cmd/tailscale/cli
encoding from encoding/json
encoding/asn1 from crypto/x509+
encoding/base64 from encoding/json+
encoding/binary from compress/gzip+
@@ -169,36 +132,36 @@ tailscale.com/cmd/tailscale dependencies: (generated by github.com/tailscale/dep
hash from compress/zlib+
hash/adler32 from compress/zlib
hash/crc32 from compress/gzip+
hash/fnv from tailscale.com/wgengine/magicsock
hash/maphash from go4.org/mem
html from tailscale.com/ipn/ipnstate
html from tailscale.com/ipn/ipnstate+
html/template from tailscale.com/cmd/tailscale/cli
io from bufio+
io/ioutil from crypto/tls+
io/fs from crypto/rand+
io/ioutil from golang.org/x/sys/cpu+
log from expvar+
math from compress/flate+
math/big from crypto/dsa+
math/bits from compress/flate+
math/rand from github.com/mdlayher/netlink+
mime from golang.org/x/oauth2/internal+
math/rand from math/big+
mime from mime/multipart+
mime/multipart from net/http
mime/quotedprintable from mime/multipart
net from crypto/tls+
net/http from expvar+
net/http/cgi from tailscale.com/cmd/tailscale/cli
net/http/httptrace from github.com/tcnksm/go-httpstat+
net/http/internal from net/http
net/textproto from golang.org/x/net/http/httpguts+
net/url from crypto/x509+
os from crypto/rand+
os/exec from github.com/coreos/go-iptables/iptables+
os/exec from github.com/toqueteos/webbrowser+
os/signal from tailscale.com/cmd/tailscale/cli
L os/user from github.com/godbus/dbus/v5
path from debug/dwarf+
path/filepath from crypto/x509+
reflect from crypto/x509+
regexp from github.com/coreos/go-iptables/iptables+
regexp from rsc.io/goversion/version+
regexp/syntax from regexp
runtime/debug from golang.org/x/sync/singleflight
runtime/pprof from tailscale.com/log/logheap+
sort from compress/flate+
strconv from compress/flate+
strings from bufio+
@@ -206,6 +169,8 @@ tailscale.com/cmd/tailscale dependencies: (generated by github.com/tailscale/dep
sync/atomic from context+
syscall from crypto/rand+
text/tabwriter from github.com/peterbourgon/ff/v2/ffcli+
text/template from html/template
text/template/parse from html/template+
time from compress/gzip+
unicode from bytes+
unicode/utf16 from encoding/asn1+

View File

@@ -8,20 +8,19 @@ package main // import "tailscale.com/cmd/tailscale"
import (
"fmt"
"log"
"os"
"path/filepath"
"strings"
"github.com/apenwarr/fixconsole"
"tailscale.com/cmd/tailscale/cli"
)
func main() {
err := fixconsole.FixConsoleIfNeeded()
if err != nil {
log.Printf("fixConsoleOutput: %v\n", err)
args := os.Args[1:]
if name, _ := os.Executable(); strings.HasSuffix(filepath.Base(name), ".cgi") {
args = []string{"web", "-cgi"}
}
if err := cli.Run(os.Args[1:]); err != nil {
if err := cli.Run(args); err != nil {
fmt.Fprintln(os.Stderr, err)
os.Exit(1)
}

172
cmd/tailscaled/debug.go Normal file
View File

@@ -0,0 +1,172 @@
// Copyright (c) 2020 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package main
import (
"context"
"crypto/tls"
"encoding/json"
"errors"
"flag"
"fmt"
"log"
"net/http"
"net/http/httptrace"
"net/url"
"os"
"time"
"tailscale.com/derp/derphttp"
"tailscale.com/derp/derpmap"
"tailscale.com/net/interfaces"
"tailscale.com/net/tshttpproxy"
"tailscale.com/tailcfg"
"tailscale.com/types/key"
"tailscale.com/wgengine/monitor"
)
var debugArgs struct {
monitor bool
getURL string
derpCheck string
}
var debugModeFunc = debugMode // so it can be addressable
func debugMode(args []string) error {
fs := flag.NewFlagSet("debug", flag.ExitOnError)
fs.BoolVar(&debugArgs.monitor, "monitor", false, "If true, run link monitor forever. Precludes all other options.")
fs.StringVar(&debugArgs.getURL, "get-url", "", "If non-empty, fetch provided URL.")
fs.StringVar(&debugArgs.derpCheck, "derp", "", "if non-empty, test a DERP ping via named region code")
if err := fs.Parse(args); err != nil {
return err
}
if len(fs.Args()) > 0 {
return errors.New("unknown non-flag debug subcommand arguments")
}
ctx := context.Background()
if debugArgs.derpCheck != "" {
return checkDerp(ctx, debugArgs.derpCheck)
}
if debugArgs.monitor {
return runMonitor(ctx)
}
if debugArgs.getURL != "" {
return getURL(ctx, debugArgs.getURL)
}
return errors.New("only --monitor is available at the moment")
}
func runMonitor(ctx context.Context) error {
dump := func(st *interfaces.State) {
j, _ := json.MarshalIndent(st, "", " ")
os.Stderr.Write(j)
}
mon, err := monitor.New(log.Printf)
if err != nil {
return err
}
mon.RegisterChangeCallback(func(changed bool, st *interfaces.State) {
if !changed {
log.Printf("Link monitor fired; no change")
return
}
log.Printf("Link monitor fired. New state:")
dump(st)
})
log.Printf("Starting link change monitor; initial state:")
dump(mon.InterfaceState())
mon.Start()
log.Printf("Started link change monitor; waiting...")
select {}
}
func getURL(ctx context.Context, urlStr string) error {
if urlStr == "login" {
urlStr = "https://login.tailscale.com"
}
log.SetOutput(os.Stdout)
ctx = httptrace.WithClientTrace(ctx, &httptrace.ClientTrace{
GetConn: func(hostPort string) { log.Printf("GetConn(%q)", hostPort) },
GotConn: func(info httptrace.GotConnInfo) { log.Printf("GotConn: %+v", info) },
DNSStart: func(info httptrace.DNSStartInfo) { log.Printf("DNSStart: %+v", info) },
DNSDone: func(info httptrace.DNSDoneInfo) { log.Printf("DNSDoneInfo: %+v", info) },
TLSHandshakeStart: func() { log.Printf("TLSHandshakeStart") },
TLSHandshakeDone: func(cs tls.ConnectionState, err error) { log.Printf("TLSHandshakeDone: %+v, %v", cs, err) },
WroteRequest: func(info httptrace.WroteRequestInfo) { log.Printf("WroteRequest: %+v", info) },
})
req, err := http.NewRequestWithContext(ctx, "GET", urlStr, nil)
if err != nil {
return fmt.Errorf("http.NewRequestWithContext: %v", err)
}
proxyURL, err := tshttpproxy.ProxyFromEnvironment(req)
if err != nil {
return fmt.Errorf("tshttpproxy.ProxyFromEnvironment: %v", err)
}
log.Printf("proxy: %v", proxyURL)
tr := &http.Transport{
Proxy: func(*http.Request) (*url.URL, error) { return proxyURL, nil },
ProxyConnectHeader: http.Header{},
DisableKeepAlives: true,
}
if proxyURL != nil {
auth, err := tshttpproxy.GetAuthHeader(proxyURL)
if err == nil && auth != "" {
tr.ProxyConnectHeader.Set("Proxy-Authorization", auth)
}
const truncLen = 20
if len(auth) > truncLen {
auth = fmt.Sprintf("%s...(%d total bytes)", auth[:truncLen], len(auth))
}
log.Printf("tshttpproxy.GetAuthHeader(%v) for Proxy-Auth: = %q, %v", proxyURL, auth, err)
}
res, err := tr.RoundTrip(req)
if err != nil {
return fmt.Errorf("Transport.RoundTrip: %v", err)
}
defer res.Body.Close()
return res.Write(os.Stdout)
}
func checkDerp(ctx context.Context, derpRegion string) error {
dmap := derpmap.Prod()
getRegion := func() *tailcfg.DERPRegion {
for _, r := range dmap.Regions {
if r.RegionCode == derpRegion {
return r
}
}
for _, r := range dmap.Regions {
log.Printf("Known region: %q", r.RegionCode)
}
log.Fatalf("unknown region %q", derpRegion)
panic("unreachable")
}
priv1 := key.NewPrivate()
priv2 := key.NewPrivate()
c1 := derphttp.NewRegionClient(priv1, log.Printf, getRegion)
c2 := derphttp.NewRegionClient(priv2, log.Printf, getRegion)
c2.NotePreferred(true) // just to open it
m, err := c2.Recv()
log.Printf("c2 got %T, %v", m, err)
t0 := time.Now()
if err := c1.Send(priv2.Public(), []byte("hello")); err != nil {
return err
}
fmt.Println(time.Since(t0))
m, err = c2.Recv()
log.Printf("c2 got %T, %v", m, err)
if err != nil {
return err
}
log.Printf("ok")
return err
}

View File

@@ -2,14 +2,14 @@ tailscale.com/cmd/tailscaled dependencies: (generated by github.com/tailscale/de
W 💣 github.com/alexbrainman/sspi from github.com/alexbrainman/sspi/negotiate
W 💣 github.com/alexbrainman/sspi/negotiate from tailscale.com/net/tshttpproxy
github.com/apenwarr/fixconsole from tailscale.com/cmd/tailscaled
W 💣 github.com/apenwarr/w32 from github.com/apenwarr/fixconsole
L github.com/coreos/go-iptables/iptables from tailscale.com/wgengine/router
LW github.com/go-multierror/multierror from tailscale.com/wgengine/router
W 💣 github.com/github/certstore from tailscale.com/control/controlclient
github.com/go-multierror/multierror from tailscale.com/wgengine/router+
W 💣 github.com/go-ole/go-ole from github.com/go-ole/go-ole/oleutil+
W 💣 github.com/go-ole/go-ole/oleutil from tailscale.com/wgengine/winnet
L 💣 github.com/godbus/dbus/v5 from tailscale.com/wgengine/router/dns
github.com/golang/groupcache/lru from tailscale.com/wgengine/filter+
L 💣 github.com/godbus/dbus/v5 from tailscale.com/net/dns
github.com/google/btree from inet.af/netstack/tcpip/header+
L github.com/josharian/native from github.com/mdlayher/netlink+
L 💣 github.com/jsimonetti/rtnetlink from tailscale.com/wgengine/monitor
L github.com/jsimonetti/rtnetlink/internal/unix from github.com/jsimonetti/rtnetlink
github.com/klauspost/compress/fse from github.com/klauspost/compress/huff0
@@ -20,35 +20,71 @@ tailscale.com/cmd/tailscaled dependencies: (generated by github.com/tailscale/de
L 💣 github.com/mdlayher/netlink from github.com/jsimonetti/rtnetlink+
L 💣 github.com/mdlayher/netlink/nlenc from github.com/jsimonetti/rtnetlink+
L github.com/mdlayher/sdnotify from tailscale.com/util/systemd
W github.com/pkg/errors from github.com/github/certstore
💣 github.com/tailscale/wireguard-go/conn from github.com/tailscale/wireguard-go/device+
W 💣 github.com/tailscale/wireguard-go/conn/winrio from github.com/tailscale/wireguard-go/conn
💣 github.com/tailscale/wireguard-go/device from tailscale.com/wgengine+
github.com/tailscale/wireguard-go/device/tokenbucket from github.com/tailscale/wireguard-go/device
💣 github.com/tailscale/wireguard-go/ipc from github.com/tailscale/wireguard-go/device
W 💣 github.com/tailscale/wireguard-go/ipc/winpipe from github.com/tailscale/wireguard-go/ipc
github.com/tailscale/wireguard-go/ratelimiter from github.com/tailscale/wireguard-go/device
github.com/tailscale/wireguard-go/replay from github.com/tailscale/wireguard-go/device
github.com/tailscale/wireguard-go/rwcancel from github.com/tailscale/wireguard-go/device+
github.com/tailscale/wireguard-go/tai64n from github.com/tailscale/wireguard-go/device
github.com/tailscale/wireguard-go/tai64n from github.com/tailscale/wireguard-go/device+
💣 github.com/tailscale/wireguard-go/tun from github.com/tailscale/wireguard-go/device+
W 💣 github.com/tailscale/wireguard-go/tun/wintun from github.com/tailscale/wireguard-go/tun
github.com/tailscale/wireguard-go/wgcfg from github.com/tailscale/wireguard-go/conn+
W 💣 github.com/tailscale/wireguard-go/tun/wintun from github.com/tailscale/wireguard-go/tun+
github.com/tcnksm/go-httpstat from tailscale.com/net/netcheck
💣 go4.org/intern from inet.af/netaddr
💣 go4.org/mem from tailscale.com/control/controlclient+
go4.org/unsafe/assume-no-moving-gc from go4.org/intern
W 💣 golang.zx2c4.com/wireguard/windows/tunnel/winipcfg from tailscale.com/net/interfaces+
inet.af/netaddr from tailscale.com/control/controlclient+
💣 inet.af/netstack/gohacks from inet.af/netstack/state/wire+
inet.af/netstack/linewriter from inet.af/netstack/log
inet.af/netstack/log from inet.af/netstack/state+
inet.af/netstack/rand from inet.af/netstack/tcpip/network/hash+
💣 inet.af/netstack/sleep from inet.af/netstack/tcpip/transport/tcp
💣 inet.af/netstack/state from inet.af/netstack/tcpip+
inet.af/netstack/state/wire from inet.af/netstack/state
💣 inet.af/netstack/sync from inet.af/netstack/linewriter+
💣 inet.af/netstack/tcpip from inet.af/netstack/tcpip/adapters/gonet+
inet.af/netstack/tcpip/adapters/gonet from tailscale.com/wgengine/netstack
💣 inet.af/netstack/tcpip/buffer from inet.af/netstack/tcpip/adapters/gonet+
inet.af/netstack/tcpip/hash/jenkins from inet.af/netstack/tcpip/stack+
inet.af/netstack/tcpip/header from inet.af/netstack/tcpip/header/parse+
inet.af/netstack/tcpip/header/parse from inet.af/netstack/tcpip/network/ipv4+
inet.af/netstack/tcpip/link/channel from tailscale.com/wgengine/netstack
inet.af/netstack/tcpip/network/hash from inet.af/netstack/tcpip/network/ipv4+
inet.af/netstack/tcpip/network/internal/fragmentation from inet.af/netstack/tcpip/network/ipv4+
inet.af/netstack/tcpip/network/internal/ip from inet.af/netstack/tcpip/network/ipv4+
inet.af/netstack/tcpip/network/ipv4 from tailscale.com/wgengine/netstack
inet.af/netstack/tcpip/network/ipv6 from tailscale.com/wgengine/netstack
inet.af/netstack/tcpip/ports from inet.af/netstack/tcpip/stack+
inet.af/netstack/tcpip/seqnum from inet.af/netstack/tcpip/header+
💣 inet.af/netstack/tcpip/stack from inet.af/netstack/tcpip/adapters/gonet+
inet.af/netstack/tcpip/transport/icmp from tailscale.com/wgengine/netstack
inet.af/netstack/tcpip/transport/packet from inet.af/netstack/tcpip/transport/raw
inet.af/netstack/tcpip/transport/raw from inet.af/netstack/tcpip/transport/icmp+
💣 inet.af/netstack/tcpip/transport/tcp from inet.af/netstack/tcpip/adapters/gonet+
inet.af/netstack/tcpip/transport/tcpconntrack from inet.af/netstack/tcpip/stack
inet.af/netstack/tcpip/transport/udp from inet.af/netstack/tcpip/adapters/gonet+
inet.af/netstack/waiter from inet.af/netstack/tcpip+
inet.af/peercred from tailscale.com/ipn/ipnserver
rsc.io/goversion/version from tailscale.com/version
tailscale.com/atomicfile from tailscale.com/ipn+
tailscale.com/control/controlclient from tailscale.com/ipn+
tailscale.com/client/tailscale/apitype from tailscale.com/ipn/ipnlocal+
tailscale.com/control/controlclient from tailscale.com/ipn/ipnlocal+
tailscale.com/derp from tailscale.com/derp/derphttp+
tailscale.com/derp/derphttp from tailscale.com/net/netcheck+
tailscale.com/derp/derpmap from tailscale.com/cmd/tailscaled+
tailscale.com/disco from tailscale.com/derp+
tailscale.com/internal/deepprint from tailscale.com/ipn+
tailscale.com/ipn from tailscale.com/ipn/ipnserver
tailscale.com/health from tailscale.com/control/controlclient+
tailscale.com/internal/deepprint from tailscale.com/ipn/ipnlocal+
tailscale.com/ipn from tailscale.com/ipn/ipnserver+
tailscale.com/ipn/ipnlocal from tailscale.com/ipn/ipnserver+
tailscale.com/ipn/ipnserver from tailscale.com/cmd/tailscaled
tailscale.com/ipn/ipnstate from tailscale.com/ipn+
tailscale.com/ipn/policy from tailscale.com/ipn
tailscale.com/ipn/localapi from tailscale.com/ipn/ipnserver
tailscale.com/ipn/policy from tailscale.com/ipn/ipnlocal
tailscale.com/log/filelogger from tailscale.com/ipn/ipnserver
tailscale.com/log/logheap from tailscale.com/control/controlclient
tailscale.com/logpolicy from tailscale.com/cmd/tailscaled
@@ -56,50 +92,66 @@ tailscale.com/cmd/tailscaled dependencies: (generated by github.com/tailscale/de
tailscale.com/logtail/backoff from tailscale.com/control/controlclient+
tailscale.com/logtail/filch from tailscale.com/logpolicy
tailscale.com/metrics from tailscale.com/derp
tailscale.com/net/dns from tailscale.com/ipn/ipnlocal+
tailscale.com/net/dns/resolver from tailscale.com/wgengine+
tailscale.com/net/dnscache from tailscale.com/control/controlclient+
💣 tailscale.com/net/interfaces from tailscale.com/ipn+
tailscale.com/net/dnsfallback from tailscale.com/control/controlclient
tailscale.com/net/flowtrack from tailscale.com/wgengine/filter+
💣 tailscale.com/net/interfaces from tailscale.com/cmd/tailscaled+
tailscale.com/net/netcheck from tailscale.com/wgengine/magicsock
tailscale.com/net/netns from tailscale.com/control/controlclient+
💣 tailscale.com/net/netstat from tailscale.com/ipn/ipnserver
tailscale.com/net/packet from tailscale.com/wgengine+
tailscale.com/net/portmapper from tailscale.com/net/netcheck+
tailscale.com/net/socks5 from tailscale.com/cmd/tailscaled
tailscale.com/net/stun from tailscale.com/net/netcheck+
tailscale.com/net/tlsdial from tailscale.com/control/controlclient+
tailscale.com/net/tsaddr from tailscale.com/ipn+
tailscale.com/net/tsaddr from tailscale.com/ipn/ipnlocal+
💣 tailscale.com/net/tshttpproxy from tailscale.com/control/controlclient+
tailscale.com/net/tstun from tailscale.com/cmd/tailscaled+
tailscale.com/paths from tailscale.com/cmd/tailscaled+
tailscale.com/portlist from tailscale.com/ipn
tailscale.com/portlist from tailscale.com/ipn/ipnlocal
tailscale.com/safesocket from tailscale.com/ipn/ipnserver
tailscale.com/smallzstd from tailscale.com/ipn/ipnserver+
💣 tailscale.com/syncs from tailscale.com/net/interfaces+
tailscale.com/syncs from tailscale.com/net/interfaces+
tailscale.com/tailcfg from tailscale.com/control/controlclient+
W 💣 tailscale.com/tempfork/wireguard-windows/firewall from tailscale.com/cmd/tailscaled
W tailscale.com/tsconst from tailscale.com/net/interfaces
tailscale.com/tstime from tailscale.com/wgengine/magicsock
tailscale.com/types/empty from tailscale.com/control/controlclient+
tailscale.com/types/flagtype from tailscale.com/cmd/tailscaled
tailscale.com/types/ipproto from tailscale.com/net/flowtrack+
tailscale.com/types/key from tailscale.com/derp+
tailscale.com/types/logger from tailscale.com/cmd/tailscaled+
tailscale.com/types/netmap from tailscale.com/control/controlclient+
tailscale.com/types/nettype from tailscale.com/wgengine/magicsock
tailscale.com/types/opt from tailscale.com/control/controlclient+
tailscale.com/types/persist from tailscale.com/control/controlclient+
tailscale.com/types/preftype from tailscale.com/ipn+
tailscale.com/types/strbuilder from tailscale.com/net/packet
tailscale.com/types/structs from tailscale.com/control/controlclient+
tailscale.com/types/wgkey from tailscale.com/control/controlclient+
tailscale.com/util/dnsname from tailscale.com/ipn/ipnstate+
LW tailscale.com/util/endian from tailscale.com/net/netns+
tailscale.com/util/lineread from tailscale.com/control/controlclient+
L tailscale.com/util/lineread from tailscale.com/control/controlclient+
tailscale.com/util/pidowner from tailscale.com/ipn/ipnserver
tailscale.com/util/racebuild from tailscale.com/logpolicy
tailscale.com/util/systemd from tailscale.com/control/controlclient+
tailscale.com/util/winutil from tailscale.com/logpolicy+
tailscale.com/version from tailscale.com/cmd/tailscaled+
tailscale.com/version/distro from tailscale.com/control/controlclient+
tailscale.com/wgengine from tailscale.com/cmd/tailscaled+
tailscale.com/wgengine/filter from tailscale.com/control/controlclient+
tailscale.com/wgengine/magicsock from tailscale.com/cmd/tailscaled+
💣 tailscale.com/wgengine/monitor from tailscale.com/wgengine
tailscale.com/wgengine/monitor from tailscale.com/wgengine+
tailscale.com/wgengine/netstack from tailscale.com/cmd/tailscaled
tailscale.com/wgengine/router from tailscale.com/cmd/tailscaled+
tailscale.com/wgengine/router/dns from tailscale.com/ipn+
tailscale.com/wgengine/tsdns from tailscale.com/ipn+
tailscale.com/wgengine/tstun from tailscale.com/wgengine
tailscale.com/wgengine/wgcfg from tailscale.com/ipn/ipnlocal+
tailscale.com/wgengine/wgcfg/nmcfg from tailscale.com/ipn/ipnlocal
tailscale.com/wgengine/wglog from tailscale.com/wgengine
W 💣 tailscale.com/wgengine/winnet from tailscale.com/wgengine/router
golang.org/x/crypto/blake2b from golang.org/x/crypto/nacl/box
golang.org/x/crypto/blake2s from github.com/tailscale/wireguard-go/device
golang.org/x/crypto/blake2s from github.com/tailscale/wireguard-go/device+
golang.org/x/crypto/chacha20 from golang.org/x/crypto/chacha20poly1305
golang.org/x/crypto/chacha20poly1305 from crypto/tls+
golang.org/x/crypto/cryptobyte from crypto/ecdsa+
@@ -111,24 +163,23 @@ tailscale.com/cmd/tailscaled dependencies: (generated by github.com/tailscale/de
golang.org/x/crypto/poly1305 from github.com/tailscale/wireguard-go/device+
golang.org/x/crypto/salsa20/salsa from golang.org/x/crypto/nacl/box+
golang.org/x/net/bpf from github.com/mdlayher/netlink+
golang.org/x/net/context/ctxhttp from golang.org/x/oauth2/internal
golang.org/x/net/dns/dnsmessage from net+
golang.org/x/net/http/httpguts from net/http
golang.org/x/net/http/httpguts from net/http+
golang.org/x/net/http/httpproxy from net/http
golang.org/x/net/http2/hpack from net/http
golang.org/x/net/idna from golang.org/x/net/http/httpguts+
golang.org/x/net/ipv4 from github.com/tailscale/wireguard-go/device
golang.org/x/net/ipv6 from github.com/tailscale/wireguard-go/device+
golang.org/x/net/proxy from tailscale.com/net/netns
D golang.org/x/net/route from net
golang.org/x/oauth2 from tailscale.com/control/controlclient+
golang.org/x/oauth2/internal from golang.org/x/oauth2
D golang.org/x/net/route from net+
golang.org/x/sync/errgroup from tailscale.com/derp
golang.org/x/sync/singleflight from tailscale.com/net/dnscache
golang.org/x/sys/cpu from golang.org/x/crypto/blake2b+
LD golang.org/x/sys/unix from github.com/jsimonetti/rtnetlink/internal/unix+
W golang.org/x/sys/windows from github.com/apenwarr/fixconsole+
W golang.org/x/sys/windows from github.com/tailscale/wireguard-go/conn+
W golang.org/x/sys/windows/registry from golang.zx2c4.com/wireguard/windows/tunnel/winipcfg+
W golang.org/x/sys/windows/svc from tailscale.com/cmd/tailscaled+
W golang.org/x/sys/windows/svc/mgr from tailscale.com/cmd/tailscaled
golang.org/x/term from tailscale.com/logpolicy
golang.org/x/text/secure/bidirule from golang.org/x/net/idna
golang.org/x/text/transform from golang.org/x/text/secure/bidirule+
@@ -140,6 +191,7 @@ tailscale.com/cmd/tailscaled dependencies: (generated by github.com/tailscale/de
compress/flate from compress/gzip+
compress/gzip from internal/profile+
compress/zlib from debug/elf+
container/heap from inet.af/netstack/tcpip/transport/tcp
container/list from crypto/tls+
context from crypto/tls+
crypto from crypto/ecdsa+
@@ -166,6 +218,7 @@ tailscale.com/cmd/tailscaled dependencies: (generated by github.com/tailscale/de
debug/elf from rsc.io/goversion/version
debug/macho from rsc.io/goversion/version
debug/pe from rsc.io/goversion/version
embed from tailscale.com/net/dns
encoding from encoding/json+
encoding/asn1 from crypto/x509+
encoding/base64 from encoding/json+
@@ -180,24 +233,25 @@ tailscale.com/cmd/tailscaled dependencies: (generated by github.com/tailscale/de
hash from compress/zlib+
hash/adler32 from compress/zlib
hash/crc32 from compress/gzip+
hash/fnv from tailscale.com/wgengine/magicsock
hash/fnv from tailscale.com/wgengine/magicsock+
hash/maphash from go4.org/mem
html from html/template+
html/template from net/http/pprof
html from net/http/pprof+
io from bufio+
io/ioutil from crypto/tls+
io/fs from crypto/rand+
io/ioutil from github.com/godbus/dbus/v5+
log from expvar+
math from compress/flate+
math/big from crypto/dsa+
math/bits from compress/flate+
math/rand from github.com/mdlayher/netlink+
mime from golang.org/x/oauth2/internal+
mime from mime/multipart+
mime/multipart from net/http
mime/quotedprintable from mime/multipart
net from crypto/tls+
net/http from expvar+
net/http/httptrace from github.com/tcnksm/go-httpstat+
net/http/internal from net/http
net/http/httputil from tailscale.com/ipn/localapi
net/http/internal from net/http+
net/http/pprof from tailscale.com/cmd/tailscaled
net/textproto from golang.org/x/net/http/httpguts+
net/url from crypto/x509+
@@ -220,8 +274,6 @@ tailscale.com/cmd/tailscaled dependencies: (generated by github.com/tailscale/de
sync/atomic from context+
syscall from crypto/rand+
text/tabwriter from runtime/pprof
text/template from html/template
text/template/parse from html/template+
time from compress/gzip+
unicode from bytes+
unicode/utf16 from encoding/asn1+

View File

@@ -0,0 +1,155 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package main
import (
"errors"
"fmt"
"io"
"io/ioutil"
"os"
"os/exec"
"path/filepath"
)
func init() {
installSystemDaemon = installSystemDaemonDarwin
uninstallSystemDaemon = uninstallSystemDaemonDarwin
}
// darwinLaunchdPlist is the launchd.plist that's written to
// /Library/LaunchDaemons/com.tailscale.tailscaled.plist or (in the
// future) a user-specific location.
//
// See man launchd.plist.
const darwinLaunchdPlist = `
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.tailscale.tailscaled</string>
<key>ProgramArguments</key>
<array>
<string>/usr/local/bin/tailscaled</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
`
const sysPlist = "/Library/LaunchDaemons/com.tailscale.tailscaled.plist"
const targetBin = "/usr/local/bin/tailscaled"
const service = "com.tailscale.tailscaled"
func uninstallSystemDaemonDarwin(args []string) (ret error) {
if len(args) > 0 {
return errors.New("uninstall subcommand takes no arguments")
}
plist, err := exec.Command("launchctl", "list", "com.tailscale.tailscaled").Output()
_ = plist // parse it? https://github.com/DHowett/go-plist if we need something.
running := err == nil
if running {
out, err := exec.Command("launchctl", "stop", "com.tailscale.tailscaled").CombinedOutput()
if err != nil {
fmt.Printf("launchctl stop com.tailscale.tailscaled: %v, %s\n", err, out)
ret = err
}
out, err = exec.Command("launchctl", "unload", sysPlist).CombinedOutput()
if err != nil {
fmt.Printf("launchctl unload %s: %v, %s\n", sysPlist, err, out)
if ret == nil {
ret = err
}
}
}
if err := os.Remove(sysPlist); err != nil {
if os.IsNotExist(err) {
err = nil
}
if ret == nil {
ret = err
}
}
if err := os.Remove(targetBin); err != nil {
if os.IsNotExist(err) {
err = nil
}
if ret == nil {
ret = err
}
}
return ret
}
func installSystemDaemonDarwin(args []string) (err error) {
if len(args) > 0 {
return errors.New("install subcommand takes no arguments")
}
defer func() {
if err != nil && os.Getuid() != 0 {
err = fmt.Errorf("%w; try running tailscaled with sudo", err)
}
}()
// Best effort:
uninstallSystemDaemonDarwin(nil)
// Copy ourselves to /usr/local/bin/tailscaled.
if err := os.MkdirAll(filepath.Dir(targetBin), 0755); err != nil {
return err
}
exe, err := os.Executable()
if err != nil {
return fmt.Errorf("failed to find our own executable path: %w", err)
}
tmpBin := targetBin + ".tmp"
f, err := os.Create(tmpBin)
if err != nil {
return err
}
self, err := os.Open(exe)
if err != nil {
f.Close()
return err
}
_, err = io.Copy(f, self)
self.Close()
if err != nil {
f.Close()
return err
}
if err := f.Close(); err != nil {
return err
}
if err := os.Chmod(tmpBin, 0755); err != nil {
return err
}
if err := os.Rename(tmpBin, targetBin); err != nil {
return err
}
if err := ioutil.WriteFile(sysPlist, []byte(darwinLaunchdPlist), 0700); err != nil {
return err
}
if out, err := exec.Command("launchctl", "load", sysPlist).CombinedOutput(); err != nil {
return fmt.Errorf("error running launchctl load %s: %v, %s", sysPlist, err, out)
}
if out, err := exec.Command("launchctl", "start", service).CombinedOutput(); err != nil {
return fmt.Errorf("error running launchctl start %s: %v, %s", service, err, out)
}
return nil
}

View File

@@ -0,0 +1,119 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package main
import (
"context"
"errors"
"fmt"
"os"
"time"
"golang.org/x/sys/windows"
"golang.org/x/sys/windows/svc"
"golang.org/x/sys/windows/svc/mgr"
"tailscale.com/logtail/backoff"
"tailscale.com/types/logger"
)
func init() {
installSystemDaemon = installSystemDaemonWindows
uninstallSystemDaemon = uninstallSystemDaemonWindows
}
func installSystemDaemonWindows(args []string) (err error) {
m, err := mgr.Connect()
if err != nil {
return fmt.Errorf("failed to connect to Windows service manager: %v", err)
}
service, err := m.OpenService(serviceName)
if err == nil {
service.Close()
return fmt.Errorf("service %q is already installed", serviceName)
}
// no such service; proceed to install the service.
exe, err := os.Executable()
if err != nil {
return err
}
c := mgr.Config{
ServiceType: windows.SERVICE_WIN32_OWN_PROCESS,
StartType: mgr.StartAutomatic,
ErrorControl: mgr.ErrorNormal,
DisplayName: serviceName,
Description: "Connects this computer to others on the Tailscale network.",
}
service, err = m.CreateService(serviceName, exe, c)
if err != nil {
return fmt.Errorf("failed to create %q service: %v", serviceName, err)
}
defer service.Close()
// Exponential backoff is often too aggressive, so use (mostly)
// squares instead.
ra := []mgr.RecoveryAction{
{mgr.ServiceRestart, 1 * time.Second},
{mgr.ServiceRestart, 2 * time.Second},
{mgr.ServiceRestart, 4 * time.Second},
{mgr.ServiceRestart, 9 * time.Second},
{mgr.ServiceRestart, 16 * time.Second},
{mgr.ServiceRestart, 25 * time.Second},
{mgr.ServiceRestart, 36 * time.Second},
{mgr.ServiceRestart, 49 * time.Second},
{mgr.ServiceRestart, 64 * time.Second},
}
const resetPeriodSecs = 60
err = service.SetRecoveryActions(ra, resetPeriodSecs)
if err != nil {
return fmt.Errorf("failed to set service recovery actions: %v", err)
}
return nil
}
func uninstallSystemDaemonWindows(args []string) (ret error) {
m, err := mgr.Connect()
if err != nil {
return fmt.Errorf("failed to connect to Windows service manager: %v", err)
}
defer m.Disconnect()
service, err := m.OpenService(serviceName)
if err != nil {
return fmt.Errorf("failed to open %q service: %v", serviceName, err)
}
st, err := service.Query()
if err != nil {
service.Close()
return fmt.Errorf("failed to query service state: %v", err)
}
if st.State != svc.Stopped {
service.Control(svc.Stop)
}
err = service.Delete()
service.Close()
if err != nil {
return fmt.Errorf("failed to delete service: %v", err)
}
bo := backoff.NewBackoff("uninstall", logger.Discard, 30*time.Second)
end := time.Now().Add(15 * time.Second)
for time.Until(end) > 0 {
service, err = m.OpenService(serviceName)
if err != nil {
// service is no longer openable; success!
break
}
service.Close()
bo.BackOff(context.Background(), errors.New("service not deleted"))
}
return nil
}

View File

@@ -11,9 +11,11 @@ package main // import "tailscale.com/cmd/tailscaled"
import (
"context"
"errors"
"flag"
"fmt"
"log"
"net"
"net/http"
"net/http/pprof"
"os"
@@ -21,18 +23,29 @@ import (
"runtime"
"runtime/debug"
"strconv"
"strings"
"sync"
"syscall"
"time"
"github.com/apenwarr/fixconsole"
"github.com/go-multierror/multierror"
"inet.af/netaddr"
"tailscale.com/ipn/ipnserver"
"tailscale.com/logpolicy"
"tailscale.com/net/dns"
"tailscale.com/net/socks5"
"tailscale.com/net/tsaddr"
"tailscale.com/net/tstun"
"tailscale.com/paths"
"tailscale.com/types/flagtype"
"tailscale.com/types/logger"
"tailscale.com/types/netmap"
"tailscale.com/version"
"tailscale.com/version/distro"
"tailscale.com/wgengine"
"tailscale.com/wgengine/magicsock"
"tailscale.com/wgengine/monitor"
"tailscale.com/wgengine/netstack"
"tailscale.com/wgengine/router"
)
@@ -52,19 +65,40 @@ func defaultTunName() string {
return "tun"
case "windows":
return "Tailscale"
case "darwin":
// "utun" is recognized by wireguard-go/tun/tun_darwin.go
// as a magic value that uses/creates any free number.
return "utun"
case "linux":
if distro.Get() == distro.Synology {
// Try TUN, but fall back to userspace networking if needed.
// See https://github.com/tailscale/tailscale-synology/issues/35
return "tailscale0,userspace-networking"
}
}
return "tailscale0"
}
var args struct {
cleanup bool
fake bool
debug string
tunname string
tunname string // tun name, "userspace-networking", or comma-separated list thereof
port uint16
statepath string
socketpath string
verbose int
socksAddr string // listen address for SOCKS5 server
}
var (
installSystemDaemon func([]string) error // non-nil on some platforms
uninstallSystemDaemon func([]string) error // non-nil on some platforms
)
var subCommands = map[string]*func([]string) error{
"install-system-daemon": &installSystemDaemon,
"uninstall-system-daemon": &uninstallSystemDaemon,
"debug": &debugModeFunc,
}
func main() {
@@ -79,17 +113,31 @@ func main() {
printVersion := false
flag.IntVar(&args.verbose, "verbose", 0, "log verbosity level; 0 is default, 1 or higher are increasingly verbose")
flag.BoolVar(&args.cleanup, "cleanup", false, "clean up system state and exit")
flag.BoolVar(&args.fake, "fake", false, "use userspace fake tunnel+routing instead of kernel TUN interface")
flag.StringVar(&args.debug, "debug", "", "listen address ([ip]:port) of optional debug server")
flag.StringVar(&args.tunname, "tun", defaultTunName(), "tunnel interface name")
flag.StringVar(&args.socksAddr, "socks5-server", "", `optional [ip]:port to run a SOCK5 server (e.g. "localhost:1080")`)
flag.StringVar(&args.tunname, "tun", defaultTunName(), `tunnel interface name; use "userspace-networking" (beta) to not use TUN`)
flag.Var(flagtype.PortValue(&args.port, magicsock.DefaultPort), "port", "UDP port to listen on for WireGuard and peer-to-peer traffic; 0 means automatically select")
flag.StringVar(&args.statepath, "state", paths.DefaultTailscaledStateFile(), "path of state file")
flag.StringVar(&args.socketpath, "socket", paths.DefaultTailscaledSocket(), "path of the service unix socket")
flag.BoolVar(&printVersion, "version", false, "print version information and exit")
err := fixconsole.FixConsoleIfNeeded()
if err != nil {
log.Fatalf("fixConsoleOutput: %v", err)
if len(os.Args) > 1 {
sub := os.Args[1]
if fp, ok := subCommands[sub]; ok {
if *fp == nil {
log.SetFlags(0)
log.Fatalf("%s not available on %v", sub, runtime.GOOS)
}
if err := (*fp)(os.Args[2:]); err != nil {
log.SetFlags(0)
log.Fatal(err)
}
return
}
}
if beWindowsSubprocess() {
return
}
flag.Parse()
@@ -102,11 +150,13 @@ func main() {
os.Exit(0)
}
if args.statepath == "" {
log.Fatalf("--state is required")
if runtime.GOOS == "darwin" && os.Getuid() != 0 && !strings.Contains(args.tunname, "userspace-networking") {
log.SetFlags(0)
log.Fatalf("tailscaled requires root; use sudo tailscaled (or use --tun=userspace-networking)")
}
if args.socketpath == "" && runtime.GOOS != "windows" {
log.SetFlags(0)
log.Fatalf("--socket is required")
}
@@ -128,6 +178,16 @@ func run() error {
pol.Shutdown(ctx)
}()
if isWindowsService() {
// Run the IPN server from the Windows service manager.
log.Printf("Running service...")
if err := runWindowsService(pol); err != nil {
log.Printf("runservice: %v", err)
}
log.Printf("Service ended.")
return nil
}
var logf logger.Logf = log.Printf
if v, _ := strconv.ParseBool(os.Getenv("TS_DEBUG_MEMORY")); v {
logf = logger.RusagePrefixLog(logf)
@@ -135,26 +195,83 @@ func run() error {
logf = logger.RateLimitedFn(logf, 5*time.Second, 5, 100)
if args.cleanup {
dns.Cleanup(logf, args.tunname)
router.Cleanup(logf, args.tunname)
return nil
}
if args.statepath == "" {
log.Fatalf("--state is required")
}
var debugMux *http.ServeMux
if args.debug != "" {
debugMux = newDebugMux()
go runDebugServer(debugMux, args.debug)
}
var e wgengine.Engine
if args.fake {
e, err = wgengine.NewFakeUserspaceEngine(logf, args.port)
} else {
e, err = wgengine.NewUserspaceEngine(logf, args.tunname, args.port)
linkMon, err := monitor.New(logf)
if err != nil {
log.Fatalf("creating link monitor: %v", err)
}
pol.Logtail.SetLinkMonitor(linkMon)
var socksListener net.Listener
if args.socksAddr != "" {
var err error
socksListener, err = net.Listen("tcp", args.socksAddr)
if err != nil {
log.Fatalf("SOCKS5 listener: %v", err)
}
}
e, useNetstack, err := createEngine(logf, linkMon)
if err != nil {
logf("wgengine.New: %v", err)
return err
}
var ns *netstack.Impl
if useNetstack || wrapNetstack {
onlySubnets := wrapNetstack && !useNetstack
ns = mustStartNetstack(logf, e, onlySubnets)
}
if socksListener != nil {
srv := &socks5.Server{
Logf: logger.WithPrefix(logf, "socks5: "),
}
var (
mu sync.Mutex // guards the following field
dns netstack.DNSMap
)
e.AddNetworkMapCallback(func(nm *netmap.NetworkMap) {
mu.Lock()
defer mu.Unlock()
dns = netstack.DNSMapFromNetworkMap(nm)
})
useNetstackForIP := func(ip netaddr.IP) bool {
// TODO(bradfitz): this isn't exactly right.
// We should also support subnets when the
// prefs are configured as such.
return tsaddr.IsTailscaleIP(ip)
}
srv.Dialer = func(ctx context.Context, network, addr string) (net.Conn, error) {
ipp, err := dns.Resolve(ctx, addr)
if err != nil {
return nil, err
}
if ns != nil && useNetstackForIP(ipp.IP) {
return ns.DialContextTCP(ctx, addr)
}
var d net.Dialer
return d.DialContext(ctx, network, ipp.String())
}
go func() {
log.Fatalf("SOCKS5 server exited: %v", srv.Serve(socksListener))
}()
}
e = wgengine.NewWatchdog(e)
ctx, cancel := context.WithCancel(context.Background())
@@ -181,8 +298,7 @@ func run() error {
Port: 41112,
StatePath: args.statepath,
AutostartStateKey: globalStateKey,
LegacyConfigPath: paths.LegacyConfigPath(),
SurviveDisconnects: true,
SurviveDisconnects: runtime.GOOS != "windows",
DebugMux: debugMux,
}
err = ipnserver.Run(ctx, logf, pol.PublicID.String(), ipnserver.FixedEngine(e), opts)
@@ -195,6 +311,80 @@ func run() error {
return nil
}
func createEngine(logf logger.Logf, linkMon *monitor.Mon) (e wgengine.Engine, useNetstack bool, err error) {
if args.tunname == "" {
return nil, false, errors.New("no --tun value specified")
}
var errs []error
for _, name := range strings.Split(args.tunname, ",") {
logf("wgengine.NewUserspaceEngine(tun %q) ...", name)
e, useNetstack, err = tryEngine(logf, linkMon, name)
if err == nil {
return e, useNetstack, nil
}
logf("wgengine.NewUserspaceEngine(tun %q) error: %v", name, err)
errs = append(errs, err)
}
return nil, false, multierror.New(errs)
}
var wrapNetstack = shouldWrapNetstack()
func shouldWrapNetstack() bool {
if e := os.Getenv("TS_DEBUG_WRAP_NETSTACK"); e != "" {
v, err := strconv.ParseBool(e)
if err != nil {
log.Fatalf("invalid TS_DEBUG_WRAP_NETSTACK value: %v", err)
}
return v
}
if distro.Get() == distro.Synology {
return true
}
switch runtime.GOOS {
case "windows", "darwin":
// Enable on Windows and tailscaled-on-macOS (this doesn't
// affect the GUI clients).
return true
}
return false
}
func tryEngine(logf logger.Logf, linkMon *monitor.Mon, name string) (e wgengine.Engine, useNetstack bool, err error) {
conf := wgengine.Config{
ListenPort: args.port,
LinkMonitor: linkMon,
}
useNetstack = name == "userspace-networking"
if !useNetstack {
dev, devName, err := tstun.New(logf, name)
if err != nil {
tstun.Diagnose(logf, name)
return nil, false, err
}
conf.Tun = dev
r, err := router.New(logf, dev)
if err != nil {
dev.Close()
return nil, false, err
}
d, err := dns.NewOSConfigurator(logf, devName)
if err != nil {
return nil, false, err
}
conf.DNS = d
conf.Router = r
if wrapNetstack {
conf.Router = netstack.NewSubnetRouterWrapper(conf.Router)
}
}
e, err = wgengine.NewUserspaceEngine(logf, conf)
if err != nil {
return nil, useNetstack, err
}
return e, useNetstack, nil
}
func newDebugMux() *http.ServeMux {
mux := http.NewServeMux()
mux.HandleFunc("/debug/pprof/", pprof.Index)
@@ -214,3 +404,18 @@ func runDebugServer(mux *http.ServeMux, addr string) {
log.Fatal(err)
}
}
func mustStartNetstack(logf logger.Logf, e wgengine.Engine, onlySubnets bool) *netstack.Impl {
tunDev, magicConn, ok := e.(wgengine.InternalsGetter).GetInternals()
if !ok {
log.Fatalf("%T is not a wgengine.InternalsGetter", e)
}
ns, err := netstack.Create(logf, tunDev, e, magicConn, onlySubnets)
if err != nil {
log.Fatalf("netstack.Create: %v", err)
}
if err := ns.Start(); err != nil {
log.Fatalf("failed to start netstack: %v", err)
}
return ns
}

View File

@@ -20,16 +20,5 @@ CacheDirectory=tailscale
CacheDirectoryMode=0750
Type=notify
LockPersonality=true
MemoryDenyWriteExecute=true
PrivateTmp=true
ProtectControlGroups=true
ProtectHome=true
ProtectKernelTunables=true
ProtectSystem=strict
ReadWritePaths=/etc/
RestrictSUIDSGID=true
SystemCallArchitectures=native
[Install]
WantedBy=multi-user.target

View File

@@ -0,0 +1,15 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// +build !windows
package main // import "tailscale.com/cmd/tailscaled"
import "tailscale.com/logpolicy"
func isWindowsService() bool { return false }
func runWindowsService(pol *logpolicy.Policy) error { panic("unreachable") }
func beWindowsSubprocess() bool { return false }

View File

@@ -0,0 +1,278 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package main // import "tailscale.com/cmd/tailscaled"
// TODO: check if administrator, like tswin does.
//
// TODO: try to load wintun.dll early at startup, before wireguard/tun
// does (which panics) and if we'd fail (e.g. due to access
// denied, even if administrator), use 'tasklist /m wintun.dll'
// to see if something else is currently using it and tell user.
//
// TODO: check if Tailscale service is already running, and fail early
// like tswin does.
//
// TODO: on failure, check if on a UNC drive and recommend copying it
// to C:\ to run it, like tswin does.
import (
"context"
"fmt"
"log"
"net"
"os"
"time"
"golang.org/x/sys/windows"
"golang.org/x/sys/windows/svc"
"golang.zx2c4.com/wireguard/windows/tunnel/winipcfg"
"tailscale.com/ipn/ipnserver"
"tailscale.com/logpolicy"
"tailscale.com/net/dns"
"tailscale.com/net/tstun"
"tailscale.com/tempfork/wireguard-windows/firewall"
"tailscale.com/types/logger"
"tailscale.com/version"
"tailscale.com/wgengine"
"tailscale.com/wgengine/netstack"
"tailscale.com/wgengine/router"
)
const serviceName = "Tailscale"
func isWindowsService() bool {
v, err := svc.IsWindowsService()
if err != nil {
log.Fatalf("svc.IsWindowsService failed: %v", err)
}
return v
}
func runWindowsService(pol *logpolicy.Policy) error {
return svc.Run(serviceName, &ipnService{Policy: pol})
}
type ipnService struct {
Policy *logpolicy.Policy
}
// Called by Windows to execute the windows service.
func (service *ipnService) Execute(args []string, r <-chan svc.ChangeRequest, changes chan<- svc.Status) (bool, uint32) {
changes <- svc.Status{State: svc.StartPending}
ctx, cancel := context.WithCancel(context.Background())
doneCh := make(chan struct{})
go func() {
defer close(doneCh)
args := []string{"/subproc", service.Policy.PublicID.String()}
ipnserver.BabysitProc(ctx, args, log.Printf)
}()
changes <- svc.Status{State: svc.Running, Accepts: svc.AcceptStop}
for ctx.Err() == nil {
select {
case <-doneCh:
case cmd := <-r:
switch cmd.Cmd {
case svc.Stop:
cancel()
case svc.Interrogate:
changes <- cmd.CurrentStatus
}
}
}
changes <- svc.Status{State: svc.StopPending}
return false, windows.NO_ERROR
}
func beWindowsSubprocess() bool {
if beFirewallKillswitch() {
return true
}
if len(os.Args) != 3 || os.Args[1] != "/subproc" {
return false
}
logid := os.Args[2]
log.Printf("Program starting: v%v: %#v", version.Long, os.Args)
log.Printf("subproc mode: logid=%v", logid)
go func() {
b := make([]byte, 16)
for {
_, err := os.Stdin.Read(b)
if err != nil {
log.Fatalf("stdin err (parent process died): %v", err)
}
}
}()
err := startIPNServer(context.Background(), logid)
if err != nil {
log.Fatalf("ipnserver: %v", err)
}
return true
}
func beFirewallKillswitch() bool {
if len(os.Args) != 3 || os.Args[1] != "/firewall" {
return false
}
log.SetFlags(0)
log.Printf("killswitch subprocess starting, tailscale GUID is %s", os.Args[2])
go func() {
b := make([]byte, 16)
for {
_, err := os.Stdin.Read(b)
if err != nil {
log.Fatalf("parent process died or requested exit, exiting (%v)", err)
}
}
}()
guid, err := windows.GUIDFromString(os.Args[2])
if err != nil {
log.Fatalf("invalid GUID %q: %v", os.Args[2], err)
}
luid, err := winipcfg.LUIDFromGUID(&guid)
if err != nil {
log.Fatalf("no interface with GUID %q", guid)
}
noProtection := false
var dnsIPs []net.IP // unused in called code.
start := time.Now()
firewall.EnableFirewall(uint64(luid), noProtection, dnsIPs)
log.Printf("killswitch enabled, took %s", time.Since(start))
// Block until the monitor goroutine shuts us down.
select {}
}
func startIPNServer(ctx context.Context, logid string) error {
var logf logger.Logf = log.Printf
getEngineRaw := func() (wgengine.Engine, error) {
dev, devName, err := tstun.New(logf, "Tailscale")
if err != nil {
return nil, fmt.Errorf("TUN: %w", err)
}
r, err := router.New(logf, dev)
if err != nil {
dev.Close()
return nil, fmt.Errorf("Router: %w", err)
}
if wrapNetstack {
r = netstack.NewSubnetRouterWrapper(r)
}
d, err := dns.NewOSConfigurator(logf, devName)
if err != nil {
r.Close()
dev.Close()
return nil, fmt.Errorf("DNS: %w", err)
}
eng, err := wgengine.NewUserspaceEngine(logf, wgengine.Config{
Tun: dev,
Router: r,
DNS: d,
ListenPort: 41641,
})
if err != nil {
r.Close()
dev.Close()
return nil, fmt.Errorf("Engine: %w", err)
}
onlySubnets := true
if wrapNetstack {
mustStartNetstack(logf, eng, onlySubnets)
}
return wgengine.NewWatchdog(eng), nil
}
type engineOrError struct {
Engine wgengine.Engine
Err error
}
engErrc := make(chan engineOrError)
t0 := time.Now()
go func() {
const ms = time.Millisecond
for try := 1; ; try++ {
logf("tailscaled: getting engine... (try %v)", try)
t1 := time.Now()
eng, err := getEngineRaw()
d, dt := time.Since(t1).Round(ms), time.Since(t1).Round(ms)
if err != nil {
logf("tailscaled: engine fetch error (try %v) in %v (total %v, sysUptime %v): %v",
try, d, dt, windowsUptime().Round(time.Second), err)
} else {
if try > 1 {
logf("tailscaled: got engine on try %v in %v (total %v)", try, d, dt)
} else {
logf("tailscaled: got engine in %v", d)
}
}
timer := time.NewTimer(5 * time.Second)
engErrc <- engineOrError{eng, err}
if err == nil {
timer.Stop()
return
}
<-timer.C
}
}()
opts := ipnserver.Options{
Port: 41112,
SurviveDisconnects: false,
StatePath: args.statepath,
}
// getEngine is called by ipnserver to get the engine. It's
// not called concurrently and is not called again once it
// successfully returns an engine.
getEngine := func() (wgengine.Engine, error) {
if msg := os.Getenv("TS_DEBUG_WIN_FAIL"); msg != "" {
return nil, fmt.Errorf("pretending to be a service failure: %v", msg)
}
for {
res := <-engErrc
if res.Engine != nil {
return res.Engine, nil
}
if time.Since(t0) < time.Minute || windowsUptime() < 10*time.Minute {
// Ignore errors during early boot. Windows 10 auto logs in the GUI
// way sooner than the networking stack components start up.
// So the network will fail for a bit (and require a few tries) while
// the GUI is still fine.
continue
}
// Return nicer errors to users, annotated with logids, which helps
// when they file bugs.
return nil, fmt.Errorf("%w\n\nlogid: %v", res.Err, logid)
}
}
err := ipnserver.Run(ctx, logf, logid, getEngine, opts)
if err != nil {
logf("ipnserver.Run: %v", err)
}
return err
}
var (
kernel32 = windows.NewLazySystemDLL("kernel32.dll")
getTickCount64Proc = kernel32.NewProc("GetTickCount64")
)
func windowsUptime() time.Duration {
r, _, _ := getTickCount64Proc.Call()
return time.Duration(int64(r)) * time.Millisecond
}

View File

@@ -32,7 +32,9 @@ import (
"github.com/gliderlabs/ssh"
"github.com/kr/pty"
gossh "golang.org/x/crypto/ssh"
"inet.af/netaddr"
"tailscale.com/net/interfaces"
"tailscale.com/net/tsaddr"
)
var (
@@ -96,7 +98,13 @@ func handleSSH(s ssh.Session) {
s.Exit(1)
return
}
if !interfaces.IsTailscaleIP(ta.IP) {
tanetaddr, ok := netaddr.FromStdIP(ta.IP)
if !ok {
log.Printf("tsshd: rejecting unparseable addr %v", ta.IP)
s.Exit(1)
return
}
if !tsaddr.IsTailscaleIP(tanetaddr) {
log.Printf("tsshd: rejecting non-Tailscale addr %v", ta.IP)
s.Exit(1)
return

View File

@@ -17,11 +17,13 @@ import (
"sync"
"time"
"golang.org/x/oauth2"
"tailscale.com/health"
"tailscale.com/logtail/backoff"
"tailscale.com/tailcfg"
"tailscale.com/types/empty"
"tailscale.com/types/logger"
"tailscale.com/types/netmap"
"tailscale.com/types/persist"
"tailscale.com/types/structs"
"tailscale.com/types/wgkey"
)
@@ -68,9 +70,9 @@ type Status struct {
LoginFinished *empty.Message
Err string
URL string
Persist *Persist // locally persisted configuration
NetMap *NetworkMap // server-pushed configuration
Hostinfo *tailcfg.Hostinfo // current Hostinfo data
Persist *persist.Persist // locally persisted configuration
NetMap *netmap.NetworkMap // server-pushed configuration
Hostinfo *tailcfg.Hostinfo // current Hostinfo data
State State
}
@@ -98,11 +100,22 @@ func (s Status) String() string {
}
type LoginGoal struct {
_ structs.Incomparable
wantLoggedIn bool // true if we *want* to be logged in
token *oauth2.Token // oauth token to use when logging in
flags LoginFlags // flags to use when logging in
url string // auth url that needs to be visited
_ structs.Incomparable
wantLoggedIn bool // true if we *want* to be logged in
token *tailcfg.Oauth2Token // oauth token to use when logging in
flags LoginFlags // flags to use when logging in
url string // auth url that needs to be visited
loggedOutResult chan<- error
}
func (g *LoginGoal) sendLogoutError(err error) {
if g.loggedOutResult == nil {
return
}
select {
case g.loggedOutResult <- err:
default:
}
}
// Client connects to a tailcontrol server for a node.
@@ -114,18 +127,21 @@ type Client struct {
closed bool
newMapCh chan struct{} // readable when we must restart a map request
unregisterHealthWatch func()
mu sync.Mutex // mutex guards the following fields
statusFunc func(Status) // called to update Client status
paused bool // whether we should stop making HTTP requests
unpauseWaiters []chan struct{}
loggedIn bool // true if currently logged in
loginGoal *LoginGoal // non-nil if some login activity is desired
synced bool // true if our netmap is up-to-date
hostinfo *tailcfg.Hostinfo
inPollNetMap bool // true if currently running a PollNetMap
inSendStatus int // number of sendStatus calls currently in progress
state State
paused bool // whether we should stop making HTTP requests
unpauseWaiters []chan struct{}
loggedIn bool // true if currently logged in
loginGoal *LoginGoal // non-nil if some login activity is desired
synced bool // true if our netmap is up-to-date
hostinfo *tailcfg.Hostinfo
inPollNetMap bool // true if currently running a PollNetMap
inLiteMapUpdate bool // true if a lite (non-streaming) map request is outstanding
inSendStatus int // number of sendStatus calls currently in progress
state State
authCtx context.Context // context used for auth requests
mapCtx context.Context // context used for netmap requests
@@ -168,7 +184,17 @@ func NewNoStart(opts Options) (*Client, error) {
}
c.authCtx, c.authCancel = context.WithCancel(context.Background())
c.mapCtx, c.mapCancel = context.WithCancel(context.Background())
c.unregisterHealthWatch = health.RegisterWatcher(c.onHealthChange)
return c, nil
}
func (c *Client) onHealthChange(sys health.Subsystem, err error) {
if sys == health.SysOverall {
return
}
c.logf("controlclient: restarting map request for %q health change to new state: %v", sys, err)
c.cancelMapSafely()
}
// SetPaused controls whether HTTP activity should be paused.
@@ -201,6 +227,50 @@ func (c *Client) Start() {
go c.mapRoutine()
}
// sendNewMapRequest either sends a new OmitPeers, non-streaming map request
// (to just send Hostinfo/Netinfo/Endpoints info, while keeping an existing
// streaming response open), or start a new streaming one if necessary.
//
// It should be called whenever there's something new to tell the server.
func (c *Client) sendNewMapRequest() {
c.mu.Lock()
// If we're not already streaming a netmap, or if we're already stuck
// in a lite update, then tear down everything and start a new stream
// (which starts by sending a new map request)
if !c.inPollNetMap || c.inLiteMapUpdate || !c.loggedIn {
c.mu.Unlock()
c.cancelMapSafely()
return
}
// Otherwise, send a lite update that doesn't keep a
// long-running stream response.
defer c.mu.Unlock()
c.inLiteMapUpdate = true
ctx, cancel := context.WithTimeout(c.mapCtx, 10*time.Second)
go func() {
defer cancel()
t0 := time.Now()
err := c.direct.SendLiteMapUpdate(ctx)
d := time.Since(t0).Round(time.Millisecond)
c.mu.Lock()
c.inLiteMapUpdate = false
c.mu.Unlock()
if err == nil {
c.logf("[v1] successful lite map update in %v", d)
return
}
if ctx.Err() == nil {
c.logf("lite map update after %v: %v", d, err)
}
// Fall back to restarting the long-polling map
// request (the old heavy way) if the lite update
// failed for any reason.
c.cancelMapSafely()
}()
}
func (c *Client) cancelAuth() {
c.mu.Lock()
if c.authCancel != nil {
@@ -304,6 +374,7 @@ func (c *Client) authRoutine() {
if !goal.wantLoggedIn {
err := c.direct.TryLogout(ctx)
goal.sendLogoutError(err)
if err != nil {
report(err, "TryLogout")
bo.BackOff(ctx, err)
@@ -343,9 +414,10 @@ func (c *Client) authRoutine() {
report(err, f)
bo.BackOff(ctx, err)
continue
} else if url != "" {
}
if url != "" {
if goal.url != "" {
err = fmt.Errorf("weird: server required a new url?")
err = fmt.Errorf("[unexpected] server required a new URL?")
report(err, "WaitLoginURL")
}
@@ -463,8 +535,10 @@ func (c *Client) mapRoutine() {
c.mu.Lock()
c.inPollNetMap = false
c.mu.Unlock()
health.SetInPollNetMap(false)
err := c.direct.PollNetMap(ctx, -1, func(nm *NetworkMap) {
err := c.direct.PollNetMap(ctx, -1, func(nm *netmap.NetworkMap) {
health.SetInPollNetMap(true)
c.mu.Lock()
select {
@@ -497,6 +571,7 @@ func (c *Client) mapRoutine() {
}
})
health.SetInPollNetMap(false)
c.mu.Lock()
c.synced = false
c.inPollNetMap = false
@@ -528,6 +603,7 @@ func (c *Client) AuthCantContinue() bool {
return !c.loggedIn && (c.loginGoal == nil || c.loginGoal.url != "")
}
// SetStatusFunc sets fn as the callback to run on any status change.
func (c *Client) SetStatusFunc(fn func(Status)) {
c.mu.Lock()
c.statusFunc = fn
@@ -542,10 +618,9 @@ func (c *Client) SetHostinfo(hi *tailcfg.Hostinfo) {
// No changes. Don't log.
return
}
c.logf("Hostinfo: %v", hi)
// Send new Hostinfo to server
c.cancelMapSafely()
c.sendNewMapRequest()
}
func (c *Client) SetNetInfo(ni *tailcfg.NetInfo) {
@@ -553,16 +628,15 @@ func (c *Client) SetNetInfo(ni *tailcfg.NetInfo) {
panic("nil NetInfo")
}
if !c.direct.SetNetInfo(ni) {
c.logf("[unexpected] duplicate NetInfo: %v", ni)
return
}
c.logf("NetInfo: %v", ni)
// Send new Hostinfo (which includes NetInfo) to server
c.cancelMapSafely()
c.sendNewMapRequest()
}
func (c *Client) sendStatus(who string, err error, url string, nm *NetworkMap) {
func (c *Client) sendStatus(who string, err error, url string, nm *netmap.NetworkMap) {
c.mu.Lock()
state := c.state
loggedIn := c.loggedIn
@@ -574,7 +648,7 @@ func (c *Client) sendStatus(who string, err error, url string, nm *NetworkMap) {
c.logf("[v1] sendStatus: %s: %v", who, state)
var p *Persist
var p *persist.Persist
var fin *empty.Message
if state == StateAuthenticated {
fin = new(empty.Message)
@@ -607,7 +681,7 @@ func (c *Client) sendStatus(who string, err error, url string, nm *NetworkMap) {
c.mu.Unlock()
}
func (c *Client) Login(t *oauth2.Token, flags LoginFlags) {
func (c *Client) Login(t *tailcfg.Oauth2Token, flags LoginFlags) {
c.logf("client.Login(%v, %v)", t != nil, flags)
c.mu.Lock()
@@ -621,22 +695,53 @@ func (c *Client) Login(t *oauth2.Token, flags LoginFlags) {
c.cancelAuth()
}
func (c *Client) Logout() {
c.logf("client.Logout()")
func (c *Client) StartLogout() {
c.logf("client.StartLogout()")
c.mu.Lock()
c.loginGoal = &LoginGoal{
wantLoggedIn: false,
}
c.mu.Unlock()
c.cancelAuth()
}
func (c *Client) UpdateEndpoints(localPort uint16, endpoints []string) {
func (c *Client) Logout(ctx context.Context) error {
c.logf("client.Logout()")
errc := make(chan error, 1)
c.mu.Lock()
c.loginGoal = &LoginGoal{
wantLoggedIn: false,
loggedOutResult: errc,
}
c.mu.Unlock()
c.cancelAuth()
timer := time.NewTimer(10 * time.Second)
defer timer.Stop()
select {
case err := <-errc:
return err
case <-ctx.Done():
return ctx.Err()
case <-timer.C:
return context.DeadlineExceeded
}
}
// UpdateEndpoints sets the client's discovered endpoints and sends
// them to the control server if they've changed.
//
// It does not retain the provided slice.
//
// The localPort field is unused except for integration tests in
// another repo.
func (c *Client) UpdateEndpoints(localPort uint16, endpoints []tailcfg.Endpoint) {
changed := c.direct.SetEndpoints(localPort, endpoints)
if changed {
c.cancelMapSafely()
c.sendNewMapRequest()
}
}
@@ -654,6 +759,7 @@ func (c *Client) Shutdown() {
c.logf("client.Shutdown: inSendStatus=%v", inSendStatus)
if !closed {
c.unregisterHealthWatch()
close(c.quit)
c.cancelAuth()
<-c.authDone

View File

@@ -42,6 +42,11 @@ func TestStatusEqual(t *testing.T) {
&Status{},
false,
},
{
nil,
nil,
true,
},
{
&Status{},
&Status{},

View File

@@ -0,0 +1,69 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package controlclient
import (
"bytes"
"compress/gzip"
"context"
"fmt"
"log"
"net/http"
"regexp"
"runtime"
"strconv"
"time"
)
func dumpGoroutinesToURL(c *http.Client, targetURL string) {
ctx, cancel := context.WithTimeout(context.Background(), 15*time.Second)
defer cancel()
zbuf := new(bytes.Buffer)
zw := gzip.NewWriter(zbuf)
zw.Write(scrubbedGoroutineDump())
zw.Close()
req, err := http.NewRequestWithContext(ctx, "PUT", targetURL, zbuf)
if err != nil {
log.Printf("dumpGoroutinesToURL: %v", err)
return
}
req.Header.Set("Content-Encoding", "gzip")
t0 := time.Now()
_, err = c.Do(req)
d := time.Since(t0).Round(time.Millisecond)
if err != nil {
log.Printf("dumpGoroutinesToURL error: %v to %v (after %v)", err, targetURL, d)
} else {
log.Printf("dumpGoroutinesToURL complete to %v (after %v)", targetURL, d)
}
}
var reHexArgs = regexp.MustCompile(`\b0x[0-9a-f]+\b`)
// scrubbedGoroutineDump returns the list of all current goroutines, but with the actual
// values of arguments scrubbed out, lest it contain some private key material.
func scrubbedGoroutineDump() []byte {
buf := make([]byte, 1<<20)
buf = buf[:runtime.Stack(buf, true)]
saw := map[string][]byte{} // "0x123" => "v1%3" (unique value 1 and its value mod 8)
return reHexArgs.ReplaceAllFunc(buf, func(in []byte) []byte {
if string(in) == "0x0" {
return in
}
if v, ok := saw[string(in)]; ok {
return v
}
u64, err := strconv.ParseUint(string(in[2:]), 16, 64)
if err != nil {
return []byte("??")
}
v := []byte(fmt.Sprintf("v%d%%%d", len(saw)+1, u64%8))
saw[string(in)] = v
return v
})
}

View File

@@ -0,0 +1,11 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package controlclient
import "testing"
func TestScrubbedGoroutineDump(t *testing.T) {
t.Logf("Got:\n%s\n", scrubbedGoroutineDump())
}

File diff suppressed because it is too large Load Diff

View File

@@ -1,20 +0,0 @@
// Copyright (c) 2020 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Code generated by tailscale.com/cmd/cloner -type Persist; DO NOT EDIT.
package controlclient
import ()
// Clone makes a deep copy of Persist.
// The result aliases no memory with the original.
func (src *Persist) Clone() *Persist {
if src == nil {
return nil
}
dst := new(Persist)
*dst = *src
return dst
}

View File

@@ -5,89 +5,101 @@
package controlclient
import (
"fmt"
"reflect"
"strings"
"encoding/json"
"testing"
"inet.af/netaddr"
"tailscale.com/tailcfg"
"tailscale.com/types/wgkey"
)
func TestUndeltaPeers(t *testing.T) {
n := func(id tailcfg.NodeID, name string) *tailcfg.Node {
return &tailcfg.Node{ID: id, Name: name}
func TestNewDirect(t *testing.T) {
hi := NewHostinfo()
ni := tailcfg.NetInfo{LinkType: "wired"}
hi.NetInfo = &ni
key, err := wgkey.NewPrivate()
if err != nil {
t.Error(err)
}
peers := func(nv ...*tailcfg.Node) []*tailcfg.Node { return nv }
tests := []struct {
name string
mapRes *tailcfg.MapResponse
prev []*tailcfg.Node
want []*tailcfg.Node
}{
{
name: "full_peers",
mapRes: &tailcfg.MapResponse{
Peers: peers(n(1, "foo"), n(2, "bar")),
},
want: peers(n(1, "foo"), n(2, "bar")),
},
{
name: "full_peers_ignores_deltas",
mapRes: &tailcfg.MapResponse{
Peers: peers(n(1, "foo"), n(2, "bar")),
PeersRemoved: []tailcfg.NodeID{2},
},
want: peers(n(1, "foo"), n(2, "bar")),
},
{
name: "add_and_update",
prev: peers(n(1, "foo"), n(2, "bar")),
mapRes: &tailcfg.MapResponse{
PeersChanged: peers(n(0, "zero"), n(2, "bar2"), n(3, "three")),
},
want: peers(n(0, "zero"), n(1, "foo"), n(2, "bar2"), n(3, "three")),
},
{
name: "remove",
prev: peers(n(1, "foo"), n(2, "bar")),
mapRes: &tailcfg.MapResponse{
PeersRemoved: []tailcfg.NodeID{1},
},
want: peers(n(2, "bar")),
},
{
name: "add_and_remove",
prev: peers(n(1, "foo"), n(2, "bar")),
mapRes: &tailcfg.MapResponse{
PeersChanged: peers(n(1, "foo2")),
PeersRemoved: []tailcfg.NodeID{2},
},
want: peers(n(1, "foo2")),
},
{
name: "unchanged",
prev: peers(n(1, "foo"), n(2, "bar")),
mapRes: &tailcfg.MapResponse{},
want: peers(n(1, "foo"), n(2, "bar")),
opts := Options{
ServerURL: "https://example.com",
Hostinfo: hi,
GetMachinePrivateKey: func() (wgkey.Private, error) {
return key, nil
},
}
for _, tt := range tests {
t.Run(tt.name, func(t *testing.T) {
undeltaPeers(tt.mapRes, tt.prev)
if !reflect.DeepEqual(tt.mapRes.Peers, tt.want) {
t.Errorf("wrong results\n got: %s\nwant: %s", formatNodes(tt.mapRes.Peers), formatNodes(tt.want))
}
})
c, err := NewDirect(opts)
if err != nil {
t.Fatal(err)
}
if c.serverURL != opts.ServerURL {
t.Errorf("c.serverURL got %v want %v", c.serverURL, opts.ServerURL)
}
if !hi.Equal(c.hostinfo) {
t.Errorf("c.hostinfo got %v want %v", c.hostinfo, hi)
}
changed := c.SetNetInfo(&ni)
if changed {
t.Errorf("c.SetNetInfo(ni) want false got %v", changed)
}
ni = tailcfg.NetInfo{LinkType: "wifi"}
changed = c.SetNetInfo(&ni)
if !changed {
t.Errorf("c.SetNetInfo(ni) want true got %v", changed)
}
changed = c.SetHostinfo(hi)
if changed {
t.Errorf("c.SetHostinfo(hi) want false got %v", changed)
}
hi = NewHostinfo()
hi.Hostname = "different host name"
changed = c.SetHostinfo(hi)
if !changed {
t.Errorf("c.SetHostinfo(hi) want true got %v", changed)
}
endpoints := fakeEndpoints(1, 2, 3)
changed = c.newEndpoints(12, endpoints)
if !changed {
t.Errorf("c.newEndpoints(12) want true got %v", changed)
}
changed = c.newEndpoints(12, endpoints)
if changed {
t.Errorf("c.newEndpoints(12) want false got %v", changed)
}
changed = c.newEndpoints(13, endpoints)
if !changed {
t.Errorf("c.newEndpoints(13) want true got %v", changed)
}
endpoints = fakeEndpoints(4, 5, 6)
changed = c.newEndpoints(13, endpoints)
if !changed {
t.Errorf("c.newEndpoints(13) want true got %v", changed)
}
}
func formatNodes(nodes []*tailcfg.Node) string {
var sb strings.Builder
for i, n := range nodes {
if i > 0 {
sb.WriteString(", ")
}
fmt.Fprintf(&sb, "(%d, %q)", n.ID, n.Name)
func fakeEndpoints(ports ...uint16) (ret []tailcfg.Endpoint) {
for _, port := range ports {
ret = append(ret, tailcfg.Endpoint{
Addr: netaddr.IPPort{Port: port},
})
}
return sb.String()
return
}
func TestNewHostinfo(t *testing.T) {
hi := NewHostinfo()
if hi == nil {
t.Fatal("no Hostinfo")
}
j, err := json.MarshalIndent(hi, " ", "")
if err != nil {
t.Fatal(err)
}
t.Logf("Got: %s", j)
}

View File

@@ -1,20 +0,0 @@
// Copyright (c) 2020 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package controlclient
import (
"tailscale.com/tailcfg"
"tailscale.com/wgengine/filter"
)
// Parse a backward-compatible FilterRule used by control's wire
// format, producing the most current filter format.
func (c *Direct) parsePacketFilter(pf []tailcfg.FilterRule) []filter.Match {
mm, err := filter.MatchesFromFilterRules(pf)
if err != nil {
c.logf("parsePacketFilter: %s\n", err)
}
return mm
}

View File

@@ -11,6 +11,7 @@ import (
"fmt"
"io"
"io/ioutil"
"os"
"strings"
"syscall"
@@ -58,6 +59,9 @@ func osVersionLinux() string {
if inContainer() {
attrBuf.WriteString("; container")
}
if inKnative() {
attrBuf.WriteString("; env=kn")
}
attr := attrBuf.String()
id := m["ID"]
@@ -99,5 +103,21 @@ func inContainer() (ret bool) {
}
return nil
})
lineread.File("/proc/mounts", func(line []byte) error {
if mem.Contains(mem.B(line), mem.S("fuse.lxcfs")) {
ret = true
return io.EOF
}
return nil
})
return
}
func inKnative() bool {
// https://cloud.google.com/run/docs/reference/container-contract#env-vars
if os.Getenv("K_REVISION") != "" && os.Getenv("K_CONFIGURATION") != "" &&
os.Getenv("K_SERVICE") != "" && os.Getenv("PORT") != "" {
return true
}
return false
}

View File

@@ -7,6 +7,7 @@ package controlclient
import (
"os/exec"
"strings"
"sync/atomic"
"syscall"
)
@@ -14,7 +15,12 @@ func init() {
osVersion = osVersionWindows
}
var winVerCache atomic.Value // of string
func osVersionWindows() string {
if s, ok := winVerCache.Load().(string); ok {
return s
}
cmd := exec.Command("cmd", "/c", "ver")
cmd.SysProcAttr = &syscall.SysProcAttr{HideWindow: true}
out, _ := cmd.Output() // "\nMicrosoft Windows [Version 10.0.19041.388]\n\n"
@@ -26,5 +32,8 @@ func osVersionWindows() string {
if sp := strings.Index(s, " "); sp != -1 {
s = s[sp+1:]
}
if s != "" {
winVerCache.Store(s)
}
return s // "10.0.19041.388", ideally
}

View File

@@ -0,0 +1,282 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package controlclient
import (
"log"
"sort"
"tailscale.com/tailcfg"
"tailscale.com/types/logger"
"tailscale.com/types/netmap"
"tailscale.com/types/wgkey"
"tailscale.com/wgengine/filter"
)
// mapSession holds the state over a long-polled "map" request to the
// control plane.
//
// It accepts incremental tailcfg.MapResponse values to
// netMapForResponse and returns fully inflated NetworkMaps, filling
// in the omitted data implicit from prior MapResponse values from
// within the same session (the same long-poll HTTP response to the
// one MapRequest).
type mapSession struct {
// Immutable fields.
privateNodeKey wgkey.Private
logf logger.Logf
vlogf logger.Logf
machinePubKey tailcfg.MachineKey
keepSharerAndUserSplit bool // see Options.KeepSharerAndUserSplit
// Fields storing state over the the coards of multiple MapResponses.
lastNode *tailcfg.Node
lastDNSConfig *tailcfg.DNSConfig
lastDERPMap *tailcfg.DERPMap
lastUserProfile map[tailcfg.UserID]tailcfg.UserProfile
lastParsedPacketFilter []filter.Match
collectServices bool
previousPeers []*tailcfg.Node // for delta-purposes
lastDomain string
// netMapBuilding is non-nil during a netmapForResponse call,
// containing the value to be returned, once fully populated.
netMapBuilding *netmap.NetworkMap
}
func newMapSession(privateNodeKey wgkey.Private) *mapSession {
ms := &mapSession{
privateNodeKey: privateNodeKey,
logf: logger.Discard,
vlogf: logger.Discard,
lastDNSConfig: new(tailcfg.DNSConfig),
lastUserProfile: map[tailcfg.UserID]tailcfg.UserProfile{},
}
return ms
}
func (ms *mapSession) addUserProfile(userID tailcfg.UserID) {
nm := ms.netMapBuilding
if _, dup := nm.UserProfiles[userID]; dup {
// Already populated it from a previous peer.
return
}
if up, ok := ms.lastUserProfile[userID]; ok {
nm.UserProfiles[userID] = up
}
}
// netmapForResponse returns a fully populated NetworkMap from a full
// or incremental MapResponse within the session, filling in omitted
// information from prior MapResponse values.
func (ms *mapSession) netmapForResponse(resp *tailcfg.MapResponse) *netmap.NetworkMap {
undeltaPeers(resp, ms.previousPeers)
ms.previousPeers = cloneNodes(resp.Peers) // defensive/lazy clone, since this escapes to who knows where
for _, up := range resp.UserProfiles {
ms.lastUserProfile[up.ID] = up
}
if resp.DERPMap != nil {
ms.vlogf("netmap: new map contains DERP map")
ms.lastDERPMap = resp.DERPMap
}
if pf := resp.PacketFilter; pf != nil {
var err error
ms.lastParsedPacketFilter, err = filter.MatchesFromFilterRules(pf)
if err != nil {
ms.logf("parsePacketFilter: %v", err)
}
}
if c := resp.DNSConfig; c != nil {
ms.lastDNSConfig = c
}
if v, ok := resp.CollectServices.Get(); ok {
ms.collectServices = v
}
if resp.Domain != "" {
ms.lastDomain = resp.Domain
}
nm := &netmap.NetworkMap{
NodeKey: tailcfg.NodeKey(ms.privateNodeKey.Public()),
PrivateKey: ms.privateNodeKey,
MachineKey: ms.machinePubKey,
Peers: resp.Peers,
UserProfiles: make(map[tailcfg.UserID]tailcfg.UserProfile),
Domain: ms.lastDomain,
DNS: *ms.lastDNSConfig,
PacketFilter: ms.lastParsedPacketFilter,
CollectServices: ms.collectServices,
DERPMap: ms.lastDERPMap,
Debug: resp.Debug,
}
ms.netMapBuilding = nm
if resp.Node != nil {
ms.lastNode = resp.Node
}
if node := ms.lastNode.Clone(); node != nil {
nm.SelfNode = node
nm.Expiry = node.KeyExpiry
nm.Name = node.Name
nm.Addresses = node.Addresses
nm.User = node.User
nm.Hostinfo = node.Hostinfo
if node.MachineAuthorized {
nm.MachineStatus = tailcfg.MachineAuthorized
} else {
nm.MachineStatus = tailcfg.MachineUnauthorized
}
}
ms.addUserProfile(nm.User)
magicDNSSuffix := nm.MagicDNSSuffix()
if nm.SelfNode != nil {
nm.SelfNode.InitDisplayNames(magicDNSSuffix)
}
for _, peer := range resp.Peers {
peer.InitDisplayNames(magicDNSSuffix)
if !peer.Sharer.IsZero() {
if ms.keepSharerAndUserSplit {
ms.addUserProfile(peer.Sharer)
} else {
peer.User = peer.Sharer
}
}
ms.addUserProfile(peer.User)
}
if len(resp.DNS) > 0 {
nm.DNS.Nameservers = resp.DNS
}
if len(resp.SearchPaths) > 0 {
nm.DNS.Domains = resp.SearchPaths
}
if Debug.ProxyDNS {
nm.DNS.Proxied = true
}
ms.netMapBuilding = nil
return nm
}
// undeltaPeers updates mapRes.Peers to be complete based on the
// provided previous peer list and the PeersRemoved and PeersChanged
// fields in mapRes, as well as the PeerSeenChange and OnlineChange
// maps.
//
// It then also nils out the delta fields.
func undeltaPeers(mapRes *tailcfg.MapResponse, prev []*tailcfg.Node) {
if len(mapRes.Peers) > 0 {
// Not delta encoded.
if !nodesSorted(mapRes.Peers) {
log.Printf("netmap: undeltaPeers: MapResponse.Peers not sorted; sorting")
sortNodes(mapRes.Peers)
}
return
}
var removed map[tailcfg.NodeID]bool
if pr := mapRes.PeersRemoved; len(pr) > 0 {
removed = make(map[tailcfg.NodeID]bool, len(pr))
for _, id := range pr {
removed[id] = true
}
}
changed := mapRes.PeersChanged
if !nodesSorted(changed) {
log.Printf("netmap: undeltaPeers: MapResponse.PeersChanged not sorted; sorting")
sortNodes(changed)
}
if !nodesSorted(prev) {
// Internal error (unrelated to the network) if we get here.
log.Printf("netmap: undeltaPeers: [unexpected] prev not sorted; sorting")
sortNodes(prev)
}
newFull := prev
if len(removed) > 0 || len(changed) > 0 {
newFull = make([]*tailcfg.Node, 0, len(prev)-len(removed))
for len(prev) > 0 && len(changed) > 0 {
pID := prev[0].ID
cID := changed[0].ID
if removed[pID] {
prev = prev[1:]
continue
}
switch {
case pID < cID:
newFull = append(newFull, prev[0])
prev = prev[1:]
case pID == cID:
newFull = append(newFull, changed[0])
prev, changed = prev[1:], changed[1:]
case cID < pID:
newFull = append(newFull, changed[0])
changed = changed[1:]
}
}
newFull = append(newFull, changed...)
for _, n := range prev {
if !removed[n.ID] {
newFull = append(newFull, n)
}
}
sortNodes(newFull)
}
if len(mapRes.PeerSeenChange) != 0 || len(mapRes.OnlineChange) != 0 {
peerByID := make(map[tailcfg.NodeID]*tailcfg.Node, len(newFull))
for _, n := range newFull {
peerByID[n.ID] = n
}
now := clockNow()
for nodeID, seen := range mapRes.PeerSeenChange {
if n, ok := peerByID[nodeID]; ok {
if seen {
n.LastSeen = &now
} else {
n.LastSeen = nil
}
}
}
for nodeID, online := range mapRes.OnlineChange {
if n, ok := peerByID[nodeID]; ok {
online := online
n.Online = &online
}
}
}
mapRes.Peers = newFull
mapRes.PeersChanged = nil
mapRes.PeersRemoved = nil
}
func nodesSorted(v []*tailcfg.Node) bool {
for i, n := range v {
if i > 0 && n.ID <= v[i-1].ID {
return false
}
}
return true
}
func sortNodes(v []*tailcfg.Node) {
sort.Slice(v, func(i, j int) bool { return v[i].ID < v[j].ID })
}
func cloneNodes(v1 []*tailcfg.Node) []*tailcfg.Node {
if v1 == nil {
return nil
}
v2 := make([]*tailcfg.Node, len(v1))
for i, n := range v1 {
v2[i] = n.Clone()
}
return v2
}

View File

@@ -0,0 +1,311 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package controlclient
import (
"encoding/json"
"fmt"
"reflect"
"strings"
"testing"
"time"
"tailscale.com/tailcfg"
"tailscale.com/types/netmap"
"tailscale.com/types/wgkey"
)
func TestUndeltaPeers(t *testing.T) {
defer func(old func() time.Time) { clockNow = old }(clockNow)
var curTime time.Time
clockNow = func() time.Time {
return curTime
}
online := func(v bool) func(*tailcfg.Node) {
return func(n *tailcfg.Node) {
n.Online = &v
}
}
seenAt := func(t time.Time) func(*tailcfg.Node) {
return func(n *tailcfg.Node) {
n.LastSeen = &t
}
}
n := func(id tailcfg.NodeID, name string, mod ...func(*tailcfg.Node)) *tailcfg.Node {
n := &tailcfg.Node{ID: id, Name: name}
for _, f := range mod {
f(n)
}
return n
}
peers := func(nv ...*tailcfg.Node) []*tailcfg.Node { return nv }
tests := []struct {
name string
mapRes *tailcfg.MapResponse
curTime time.Time
prev []*tailcfg.Node
want []*tailcfg.Node
}{
{
name: "full_peers",
mapRes: &tailcfg.MapResponse{
Peers: peers(n(1, "foo"), n(2, "bar")),
},
want: peers(n(1, "foo"), n(2, "bar")),
},
{
name: "full_peers_ignores_deltas",
mapRes: &tailcfg.MapResponse{
Peers: peers(n(1, "foo"), n(2, "bar")),
PeersRemoved: []tailcfg.NodeID{2},
},
want: peers(n(1, "foo"), n(2, "bar")),
},
{
name: "add_and_update",
prev: peers(n(1, "foo"), n(2, "bar")),
mapRes: &tailcfg.MapResponse{
PeersChanged: peers(n(0, "zero"), n(2, "bar2"), n(3, "three")),
},
want: peers(n(0, "zero"), n(1, "foo"), n(2, "bar2"), n(3, "three")),
},
{
name: "remove",
prev: peers(n(1, "foo"), n(2, "bar")),
mapRes: &tailcfg.MapResponse{
PeersRemoved: []tailcfg.NodeID{1},
},
want: peers(n(2, "bar")),
},
{
name: "add_and_remove",
prev: peers(n(1, "foo"), n(2, "bar")),
mapRes: &tailcfg.MapResponse{
PeersChanged: peers(n(1, "foo2")),
PeersRemoved: []tailcfg.NodeID{2},
},
want: peers(n(1, "foo2")),
},
{
name: "unchanged",
prev: peers(n(1, "foo"), n(2, "bar")),
mapRes: &tailcfg.MapResponse{},
want: peers(n(1, "foo"), n(2, "bar")),
},
{
name: "online_change",
prev: peers(n(1, "foo"), n(2, "bar")),
mapRes: &tailcfg.MapResponse{
OnlineChange: map[tailcfg.NodeID]bool{
1: true,
},
},
want: peers(
n(1, "foo", online(true)),
n(2, "bar"),
),
},
{
name: "online_change_offline",
prev: peers(n(1, "foo"), n(2, "bar")),
mapRes: &tailcfg.MapResponse{
OnlineChange: map[tailcfg.NodeID]bool{
1: false,
2: true,
},
},
want: peers(
n(1, "foo", online(false)),
n(2, "bar", online(true)),
),
},
{
name: "peer_seen_at",
prev: peers(n(1, "foo", seenAt(time.Unix(111, 0))), n(2, "bar")),
curTime: time.Unix(123, 0),
mapRes: &tailcfg.MapResponse{
PeerSeenChange: map[tailcfg.NodeID]bool{
1: false,
2: true,
},
},
want: peers(
n(1, "foo"),
n(2, "bar", seenAt(time.Unix(123, 0))),
),
},
}
for _, tt := range tests {
t.Run(tt.name, func(t *testing.T) {
if !tt.curTime.IsZero() {
curTime = tt.curTime
}
undeltaPeers(tt.mapRes, tt.prev)
if !reflect.DeepEqual(tt.mapRes.Peers, tt.want) {
t.Errorf("wrong results\n got: %s\nwant: %s", formatNodes(tt.mapRes.Peers), formatNodes(tt.want))
}
})
}
}
func formatNodes(nodes []*tailcfg.Node) string {
var sb strings.Builder
for i, n := range nodes {
if i > 0 {
sb.WriteString(", ")
}
var extra string
if n.Online != nil {
extra += fmt.Sprintf(", online=%v", *n.Online)
}
if n.LastSeen != nil {
extra += fmt.Sprintf(", lastSeen=%v", n.LastSeen.Unix())
}
fmt.Fprintf(&sb, "(%d, %q%s)", n.ID, n.Name, extra)
}
return sb.String()
}
func newTestMapSession(t *testing.T) *mapSession {
k, err := wgkey.NewPrivate()
if err != nil {
t.Fatal(err)
}
return newMapSession(k)
}
func TestNetmapForResponse(t *testing.T) {
t.Run("implicit_packetfilter", func(t *testing.T) {
somePacketFilter := []tailcfg.FilterRule{
{
SrcIPs: []string{"*"},
DstPorts: []tailcfg.NetPortRange{
{IP: "10.2.3.4", Ports: tailcfg.PortRange{First: 22, Last: 22}},
},
},
}
ms := newTestMapSession(t)
nm1 := ms.netmapForResponse(&tailcfg.MapResponse{
Node: new(tailcfg.Node),
PacketFilter: somePacketFilter,
})
if len(nm1.PacketFilter) == 0 {
t.Fatalf("zero length PacketFilter")
}
nm2 := ms.netmapForResponse(&tailcfg.MapResponse{
Node: new(tailcfg.Node),
PacketFilter: nil, // testing that the server can omit this.
})
if len(nm1.PacketFilter) == 0 {
t.Fatalf("zero length PacketFilter in 2nd netmap")
}
if !reflect.DeepEqual(nm1.PacketFilter, nm2.PacketFilter) {
t.Error("packet filters differ")
}
})
t.Run("implicit_dnsconfig", func(t *testing.T) {
someDNSConfig := &tailcfg.DNSConfig{Domains: []string{"foo", "bar"}}
ms := newTestMapSession(t)
nm1 := ms.netmapForResponse(&tailcfg.MapResponse{
Node: new(tailcfg.Node),
DNSConfig: someDNSConfig,
})
if !reflect.DeepEqual(nm1.DNS, *someDNSConfig) {
t.Fatalf("1st DNS wrong")
}
nm2 := ms.netmapForResponse(&tailcfg.MapResponse{
Node: new(tailcfg.Node),
DNSConfig: nil, // implict
})
if !reflect.DeepEqual(nm2.DNS, *someDNSConfig) {
t.Fatalf("2nd DNS wrong")
}
})
t.Run("collect_services", func(t *testing.T) {
ms := newTestMapSession(t)
var nm *netmap.NetworkMap
wantCollect := func(v bool) {
t.Helper()
if nm.CollectServices != v {
t.Errorf("netmap.CollectServices = %v; want %v", nm.CollectServices, v)
}
}
nm = ms.netmapForResponse(&tailcfg.MapResponse{
Node: new(tailcfg.Node),
})
wantCollect(false)
nm = ms.netmapForResponse(&tailcfg.MapResponse{
Node: new(tailcfg.Node),
CollectServices: "false",
})
wantCollect(false)
nm = ms.netmapForResponse(&tailcfg.MapResponse{
Node: new(tailcfg.Node),
CollectServices: "true",
})
wantCollect(true)
nm = ms.netmapForResponse(&tailcfg.MapResponse{
Node: new(tailcfg.Node),
CollectServices: "",
})
wantCollect(true)
})
t.Run("implicit_domain", func(t *testing.T) {
ms := newTestMapSession(t)
var nm *netmap.NetworkMap
want := func(v string) {
t.Helper()
if nm.Domain != v {
t.Errorf("netmap.Domain = %q; want %q", nm.Domain, v)
}
}
nm = ms.netmapForResponse(&tailcfg.MapResponse{
Node: new(tailcfg.Node),
Domain: "foo.com",
})
want("foo.com")
nm = ms.netmapForResponse(&tailcfg.MapResponse{
Node: new(tailcfg.Node),
})
want("foo.com")
})
t.Run("implicit_node", func(t *testing.T) {
someNode := &tailcfg.Node{
Name: "foo",
}
wantNode := &tailcfg.Node{
Name: "foo",
ComputedName: "foo",
ComputedNameWithHost: "foo",
}
ms := newTestMapSession(t)
nm1 := ms.netmapForResponse(&tailcfg.MapResponse{
Node: someNode,
})
if nm1.SelfNode == nil {
t.Fatal("nil Node in 1st netmap")
}
if !reflect.DeepEqual(nm1.SelfNode, wantNode) {
j, _ := json.Marshal(nm1.SelfNode)
t.Errorf("Node mismatch in 1st netmap; got: %s", j)
}
nm2 := ms.netmapForResponse(&tailcfg.MapResponse{})
if nm2.SelfNode == nil {
t.Fatal("nil Node in 1st netmap")
}
if !reflect.DeepEqual(nm2.SelfNode, wantNode) {
j, _ := json.Marshal(nm2.SelfNode)
t.Errorf("Node mismatch in 2nd netmap; got: %s", j)
}
})
}

View File

@@ -0,0 +1,31 @@
// Copyright (c) 2020 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package controlclient
import (
"crypto"
"errors"
"fmt"
"time"
"tailscale.com/types/wgkey"
)
var (
errNoCertStore = errors.New("no certificate store")
errCertificateNotConfigured = errors.New("no certificate subject configured")
)
// HashRegisterRequest generates the hash required sign or verify a
// tailcfg.RegisterRequest with tailcfg.SignatureV1.
func HashRegisterRequest(ts time.Time, serverURL string, deviceCert []byte, serverPubKey, machinePubKey wgkey.Key) []byte {
h := crypto.SHA256.New()
// hash.Hash.Write never returns an error, so we don't check for one here.
fmt.Fprintf(h, "%s%s%s%s%s",
ts.UTC().Format(time.RFC3339), serverURL, deviceCert, serverPubKey, machinePubKey)
return h.Sum(nil)
}

View File

@@ -0,0 +1,181 @@
// Copyright (c) 2020 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// +build windows,cgo
// darwin,cgo is also supported by certstore but machineCertificateSubject will
// need to be loaded by a different mechanism, so this is not currently enabled
// on darwin.
package controlclient
import (
"crypto"
"crypto/rsa"
"crypto/x509"
"errors"
"fmt"
"sync"
"github.com/github/certstore"
"tailscale.com/tailcfg"
"tailscale.com/types/wgkey"
"tailscale.com/util/winutil"
)
var getMachineCertificateSubjectOnce struct {
sync.Once
v string // Subject of machine certificate to search for
}
// getMachineCertificateSubject returns the exact name of a Subject that needs
// to be present in an identity's certificate chain to sign a RegisterRequest,
// formatted as per pkix.Name.String(). The Subject may be that of the identity
// itself, an intermediate CA or the root CA.
//
// If getMachineCertificateSubject() returns "" then no lookup will occur and
// each RegisterRequest will be unsigned.
//
// Example: "CN=Tailscale Inc Test Root CA,OU=Tailscale Inc Test Certificate Authority,O=Tailscale Inc,ST=ON,C=CA"
func getMachineCertificateSubject() string {
getMachineCertificateSubjectOnce.Do(func() {
getMachineCertificateSubjectOnce.v = winutil.GetRegString("MachineCertificateSubject", "")
})
return getMachineCertificateSubjectOnce.v
}
var (
errNoMatch = errors.New("no matching certificate")
errBadRequest = errors.New("malformed request")
)
func isSupportedCertificate(cert *x509.Certificate) bool {
return cert.PublicKeyAlgorithm == x509.RSA
}
func isSubjectInChain(subject string, chain []*x509.Certificate) bool {
if len(chain) == 0 || chain[0] == nil {
return false
}
for _, c := range chain {
if c == nil {
continue
}
if c.Subject.String() == subject {
return true
}
}
return false
}
func selectIdentityFromSlice(subject string, ids []certstore.Identity) (certstore.Identity, []*x509.Certificate) {
for _, id := range ids {
chain, err := id.CertificateChain()
if err != nil {
continue
}
if !isSupportedCertificate(chain[0]) {
continue
}
if isSubjectInChain(subject, chain) {
return id, chain
}
}
return nil, nil
}
// findIdentity locates an identity from the Windows or Darwin certificate
// store. It returns the first certificate with a matching Subject anywhere in
// its certificate chain, so it is possible to search for the leaf certificate,
// intermediate CA or root CA. If err is nil then the returned identity will
// never be nil (if no identity is found, the error errNoMatch will be
// returned). If an identity is returned then its certificate chain is also
// returned.
func findIdentity(subject string, st certstore.Store) (certstore.Identity, []*x509.Certificate, error) {
ids, err := st.Identities()
if err != nil {
return nil, nil, err
}
selected, chain := selectIdentityFromSlice(subject, ids)
for _, id := range ids {
if id != selected {
id.Close()
}
}
if selected == nil {
return nil, nil, errNoMatch
}
return selected, chain, nil
}
// signRegisterRequest looks for a suitable machine identity from the local
// system certificate store, and if one is found, signs the RegisterRequest
// using that identity's public key. In addition to the signature, the full
// certificate chain is included so that the control server can validate the
// certificate from a copy of the root CA's certificate.
func signRegisterRequest(req *tailcfg.RegisterRequest, serverURL string, serverPubKey, machinePubKey wgkey.Key) (err error) {
defer func() {
if err != nil {
err = fmt.Errorf("signRegisterRequest: %w", err)
}
}()
if req.Timestamp == nil {
return errBadRequest
}
machineCertificateSubject := getMachineCertificateSubject()
if machineCertificateSubject == "" {
return errCertificateNotConfigured
}
st, err := certstore.Open(certstore.System)
if err != nil {
return fmt.Errorf("open cert store: %w", err)
}
defer st.Close()
id, chain, err := findIdentity(machineCertificateSubject, st)
if err != nil {
return fmt.Errorf("find identity: %w", err)
}
defer id.Close()
signer, err := id.Signer()
if err != nil {
return fmt.Errorf("create signer: %w", err)
}
cl := 0
for _, c := range chain {
cl += len(c.Raw)
}
req.DeviceCert = make([]byte, 0, cl)
for _, c := range chain {
req.DeviceCert = append(req.DeviceCert, c.Raw...)
}
h := HashRegisterRequest(req.Timestamp.UTC(), serverURL, req.DeviceCert, serverPubKey, machinePubKey)
req.Signature, err = signer.Sign(nil, h, &rsa.PSSOptions{
SaltLength: rsa.PSSSaltLengthEqualsHash,
Hash: crypto.SHA256,
})
if err != nil {
return fmt.Errorf("sign: %w", err)
}
req.SignatureType = tailcfg.SignatureV1
return nil
}

View File

@@ -0,0 +1,17 @@
// Copyright (c) 2020 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// +build !windows !cgo
package controlclient
import (
"tailscale.com/tailcfg"
"tailscale.com/types/wgkey"
)
// signRegisterRequest on non-supported platforms always returns errNoCertStore.
func signRegisterRequest(req *tailcfg.RegisterRequest, serverURL string, serverPubKey, machinePubKey wgkey.Key) error {
return errNoCertStore
}

View File

@@ -59,7 +59,8 @@ Login:
* server sends frameServerInfo
Steady state:
* server occasionally sends frameKeepAlive
* server occasionally sends frameKeepAlive (or framePing)
* client responds to any framePing with a framePong
* client sends frameSendPacket
* server then sends frameRecvPacket to recipient
*/
@@ -97,6 +98,9 @@ const (
// connection. (To be used for cluster load balancing
// purposes, when clients end up on a non-ideal node)
frameClosePeer = frameType(0x11) // 32B pub key of peer to close.
framePing = frameType(0x12) // 8 byte ping payload, to be echoed back in framePong
framePong = frameType(0x13) // 8 byte payload, the contents of the ping being replied to
)
var bin = binary.BigEndian

View File

@@ -21,13 +21,14 @@ import (
// Client is a DERP client.
type Client struct {
serverKey key.Public // of the DERP server; not a machine or node key
privateKey key.Private
publicKey key.Public // of privateKey
logf logger.Logf
nc Conn
br *bufio.Reader
meshKey string
serverKey key.Public // of the DERP server; not a machine or node key
privateKey key.Private
publicKey key.Public // of privateKey
logf logger.Logf
nc Conn
br *bufio.Reader
meshKey string
canAckPings bool
wmu sync.Mutex // hold while writing to bw
bw *bufio.Writer
@@ -48,8 +49,9 @@ func (f clientOptFunc) update(o *clientOpt) { f(o) }
// clientOpt are the options passed to newClient.
type clientOpt struct {
MeshKey string
ServerPub key.Public
MeshKey string
ServerPub key.Public
CanAckPings bool
}
// MeshKey returns a ClientOpt to pass to the DERP server during connect to get
@@ -64,6 +66,12 @@ func ServerPublicKey(key key.Public) ClientOpt {
return clientOptFunc(func(o *clientOpt) { o.ServerPub = key })
}
// CanAckPings returns a ClientOpt to set whether it advertises to the
// server that it's capable of acknowledging ping requests.
func CanAckPings(v bool) ClientOpt {
return clientOptFunc(func(o *clientOpt) { o.CanAckPings = v })
}
func NewClient(privateKey key.Private, nc Conn, brw *bufio.ReadWriter, logf logger.Logf, opts ...ClientOpt) (*Client, error) {
var opt clientOpt
for _, o := range opts {
@@ -77,13 +85,14 @@ func NewClient(privateKey key.Private, nc Conn, brw *bufio.ReadWriter, logf logg
func newClient(privateKey key.Private, nc Conn, brw *bufio.ReadWriter, logf logger.Logf, opt clientOpt) (*Client, error) {
c := &Client{
privateKey: privateKey,
publicKey: privateKey.Public(),
logf: logf,
nc: nc,
br: brw.Reader,
bw: brw.Writer,
meshKey: opt.MeshKey,
privateKey: privateKey,
publicKey: privateKey.Public(),
logf: logf,
nc: nc,
br: brw.Reader,
bw: brw.Writer,
meshKey: opt.MeshKey,
canAckPings: opt.CanAckPings,
}
if opt.ServerPub.IsZero() {
if err := c.recvServerKey(); err != nil {
@@ -147,6 +156,10 @@ type clientInfo struct {
// connection list & forward packets. It's empty for regular
// users.
MeshKey string `json:"meshKey,omitempty"`
// CanAckPings is whether the client declares it's able to ack
// pings.
CanAckPings bool
}
func (c *Client) sendClientKey() error {
@@ -155,8 +168,9 @@ func (c *Client) sendClientKey() error {
return err
}
msg, err := json.Marshal(clientInfo{
Version: ProtocolVersion,
MeshKey: c.meshKey,
Version: ProtocolVersion,
MeshKey: c.meshKey,
CanAckPings: c.canAckPings,
})
if err != nil {
return err
@@ -238,6 +252,18 @@ func (c *Client) ForwardPacket(srcKey, dstKey key.Public, pkt []byte) (err error
func (c *Client) writeTimeoutFired() { c.nc.Close() }
func (c *Client) SendPong(data [8]byte) error {
c.wmu.Lock()
defer c.wmu.Unlock()
if err := writeFrameHeader(c.bw, framePong, 8); err != nil {
return err
}
if _, err := c.bw.Write(data[:]); err != nil {
return err
}
return c.bw.Flush()
}
// NotePreferred sends a packet that tells the server whether this
// client is the user's preferred server. This is only used in the
// server for stats.
@@ -319,6 +345,19 @@ type ServerInfoMessage struct{}
func (ServerInfoMessage) msg() {}
// PingMessage is a request from a client or server to reply to the
// other side with a PongMessage with the given payload.
type PingMessage [8]byte
func (PingMessage) msg() {}
// KeepAliveMessage is a one-way empty message from server to client, just to
// keep the connection alive. It's like a PingMessage, but doesn't solicit
// a reply from the client.
type KeepAliveMessage struct{}
func (KeepAliveMessage) msg() {}
// Recv reads a message from the DERP server.
//
// The returned message may alias memory owned by the Client; it
@@ -397,9 +436,9 @@ func (c *Client) recvTimeout(timeout time.Duration) (m ReceivedMessage, err erro
// TODO: add the results of parseServerInfo to ServerInfoMessage if we ever need it.
return ServerInfoMessage{}, nil
case frameKeepAlive:
// TODO: eventually we'll have server->client pings that
// require ack pongs.
continue
// A one-way keep-alive message that doesn't require an acknowledgement.
// This predated framePing/framePong.
return KeepAliveMessage{}, nil
case framePeerGone:
if n < keyLen {
c.logf("[unexpected] dropping short peerGone frame from DERP server")
@@ -427,6 +466,15 @@ func (c *Client) recvTimeout(timeout time.Duration) (m ReceivedMessage, err erro
copy(rp.Source[:], b[:keyLen])
rp.Data = b[keyLen:n]
return rp, nil
case framePing:
var pm PingMessage
if n < 8 {
c.logf("[unexpected] dropping short ping frame")
continue
}
copy(pm[:], b[:])
return pm, nil
}
}
}

View File

@@ -6,6 +6,7 @@ package derp
import (
"bufio"
"bytes"
"context"
crand "crypto/rand"
"crypto/x509"
@@ -408,7 +409,7 @@ func TestSendFreeze(t *testing.T) {
for i := 0; i < cap(errCh); i++ {
err := <-errCh
if err != nil {
if errors.Is(err, io.EOF) {
if errors.Is(err, io.EOF) || errors.Is(err, net.ErrClosed) {
continue
}
t.Error(err)
@@ -791,6 +792,63 @@ func TestMetaCert(t *testing.T) {
}
}
type dummyNetConn struct {
net.Conn
}
func (dummyNetConn) SetReadDeadline(time.Time) error { return nil }
func TestClientRecv(t *testing.T) {
tests := []struct {
name string
input []byte
want interface{}
}{
{
name: "ping",
input: []byte{
byte(framePing), 0, 0, 0, 8,
1, 2, 3, 4, 5, 6, 7, 8,
},
want: PingMessage{1, 2, 3, 4, 5, 6, 7, 8},
},
}
for _, tt := range tests {
t.Run(tt.name, func(t *testing.T) {
c := &Client{
nc: dummyNetConn{},
br: bufio.NewReader(bytes.NewReader(tt.input)),
logf: t.Logf,
}
got, err := c.Recv()
if err != nil {
t.Fatal(err)
}
if !reflect.DeepEqual(got, tt.want) {
t.Errorf("got %#v; want %#v", got, tt.want)
}
})
}
}
func TestClientSendPong(t *testing.T) {
var buf bytes.Buffer
c := &Client{
bw: bufio.NewWriter(&buf),
}
if err := c.SendPong([8]byte{1, 2, 3, 4, 5, 6, 7, 8}); err != nil {
t.Fatal(err)
}
want := []byte{
byte(framePong), 0, 0, 0, 8,
1, 2, 3, 4, 5, 6, 7, 8,
}
if !bytes.Equal(buf.Bytes(), want) {
t.Errorf("unexpected output\nwrote: % 02x\n want: % 02x", buf.Bytes(), want)
}
}
func BenchmarkSendRecv(b *testing.B) {
for _, size := range []int{10, 100, 1000, 10000} {
b.Run(fmt.Sprintf("msgsize=%d", size), func(b *testing.B) { benchmarkSendRecvSize(b, size) })

View File

@@ -63,6 +63,7 @@ type Client struct {
mu sync.Mutex
preferred bool
canAckPings bool
closed bool
netConn io.Closer
client *derp.Client
@@ -333,7 +334,11 @@ func (c *Client) connect(ctx context.Context, caller string) (client *derp.Clien
return nil, 0, fmt.Errorf("GET failed: %v: %s", err, b)
}
}
derpClient, err = derp.NewClient(c.privateKey, httpConn, brw, c.logf, derp.MeshKey(c.MeshKey), derp.ServerPublicKey(serverPub))
derpClient, err = derp.NewClient(c.privateKey, httpConn, brw, c.logf,
derp.MeshKey(c.MeshKey),
derp.ServerPublicKey(serverPub),
derp.CanAckPings(c.canAckPings),
)
if err != nil {
return nil, 0, err
}
@@ -358,7 +363,7 @@ func (c *Client) dialURL(ctx context.Context) (net.Conn, error) {
dialer := netns.NewDialer()
if c.DNSCache != nil {
ip, err := c.DNSCache.LookupIP(ctx, host)
ip, _, err := c.DNSCache.LookupIP(ctx, host)
if err == nil {
hostOrIP = ip.String()
}
@@ -642,6 +647,38 @@ func (c *Client) ForwardPacket(from, to key.Public, b []byte) error {
return err
}
// SendPong sends a reply to a ping, with the ping's provided
// challenge/identifier data.
//
// Unlike other send methods, SendPong makes no attempt to connect or
// reconnect to the peer. It's best effort. If there's a connection
// problem, the server will choose to hang up on us if we're not
// replying.
func (c *Client) SendPong(data [8]byte) error {
c.mu.Lock()
if c.closed {
c.mu.Unlock()
return ErrClientClosed
}
if c.client == nil {
c.mu.Unlock()
return errors.New("not connected")
}
dc := c.client
c.mu.Unlock()
return dc.SendPong(data)
}
// SetCanAckPings sets whether this client will reply to ping requests from the server.
//
// This only affects future connections.
func (c *Client) SetCanAckPings(v bool) {
c.mu.Lock()
defer c.mu.Unlock()
c.canAckPings = v
}
// NotePreferred notes whether this Client is the caller's preferred
// (home) DERP node. It's only used for stats.
func (c *Client) NotePreferred(v bool) {
@@ -709,10 +746,19 @@ func (c *Client) RecvDetail() (m derp.ReceivedMessage, connGen int, err error) {
m, err = client.Recv()
if err != nil {
c.closeForReconnect(client)
if c.isClosed() {
err = ErrClientClosed
}
}
return m, connGen, err
}
func (c *Client) isClosed() bool {
c.mu.Lock()
defer c.mu.Unlock()
return c.closed
}
// Close closes the client. It will not automatically reconnect after
// being closed.
func (c *Client) Close() error {

View File

@@ -5,20 +5,32 @@
package derphttp
import (
"context"
"sync"
"time"
"tailscale.com/derp"
"tailscale.com/types/key"
"tailscale.com/types/logger"
)
// RunWatchConnectionLoop loops forever, sending WatchConnectionChanges and subscribing to
// RunWatchConnectionLoop loops until ctx is done, sending WatchConnectionChanges and subscribing to
// connection changes.
//
// If the server's public key is ignoreServerKey, RunWatchConnectionLoop returns.
//
// Otherwise, the add and remove funcs are called as clients come & go.
func (c *Client) RunWatchConnectionLoop(ignoreServerKey key.Public, add, remove func(key.Public)) {
//
// infoLogf, if non-nil, is the logger to write periodic status
// updates about how many peers are on the server. Error log output is
// set to the c's logger, regardless of infoLogf's value.
//
// To force RunWatchConnectionLoop to return quickly, its ctx needs to
// be closed, and c itself needs to be closed.
func (c *Client) RunWatchConnectionLoop(ctx context.Context, ignoreServerKey key.Public, infoLogf logger.Logf, add, remove func(key.Public)) {
if infoLogf == nil {
infoLogf = logger.Discard
}
logf := c.logf
const retryInterval = 5 * time.Second
const statusInterval = 10 * time.Second
@@ -45,7 +57,7 @@ func (c *Client) RunWatchConnectionLoop(ignoreServerKey key.Public, add, remove
if loggedConnected {
return
}
logf("connected; %d peers", len(present))
infoLogf("connected; %d peers", len(present))
loggedConnected = true
}
@@ -79,12 +91,21 @@ func (c *Client) RunWatchConnectionLoop(ignoreServerKey key.Public, add, remove
}
}
for {
sleep := func(d time.Duration) {
t := time.NewTimer(d)
select {
case <-ctx.Done():
t.Stop()
case <-t.C:
}
}
for ctx.Err() == nil {
err := c.WatchConnectionChanges()
if err != nil {
clear()
logf("WatchConnectionChanges: %v", err)
time.Sleep(retryInterval)
sleep(retryInterval)
continue
}
@@ -97,7 +118,7 @@ func (c *Client) RunWatchConnectionLoop(ignoreServerKey key.Public, add, remove
if err != nil {
clear()
logf("Recv: %v", err)
time.Sleep(retryInterval)
sleep(retryInterval)
break
}
if connGen != lastConnGen {
@@ -114,9 +135,8 @@ func (c *Client) RunWatchConnectionLoop(ignoreServerKey key.Public, add, remove
}
if now := time.Now(); now.Sub(lastStatus) > statusInterval {
lastStatus = now
logf("%d peers", len(present))
infoLogf("%d peers", len(present))
}
}
}
}

View File

@@ -70,7 +70,7 @@ func Parse(p []byte) (Message, error) {
case TypePong:
return parsePong(ver, p)
case TypeCallMeMaybe:
return CallMeMaybe{}, nil
return parseCallMeMaybe(ver, p)
default:
return nil, fmt.Errorf("unknown message type 0x%02x", byte(t))
}
@@ -122,13 +122,57 @@ func parsePing(ver uint8, p []byte) (m *Ping, err error) {
//
// The recipient may choose to not open a path back, if it's already
// happy with its path. But usually it will.
type CallMeMaybe struct{}
type CallMeMaybe struct {
// MyNumber is what the peer believes its endpoints are.
//
// Prior to Tailscale 1.4, the endpoints were exchanged purely
// between nodes and the control server.
//
// Starting with Tailscale 1.4, clients advertise their endpoints.
// Older clients won't use this, but newer clients should
// use any endpoints in here that aren't included from control.
//
// Control might have sent stale endpoints if the client was idle
// before contacting us. In that case, the client likely did a STUN
// request immediately before sending the CallMeMaybe to recreate
// their NAT port mapping, and that new good endpoint is included
// in this field, but might not yet be in control's endpoints.
// (And in the future, control will stop distributing endpoints
// when clients are suitably new.)
MyNumber []netaddr.IPPort
}
func (CallMeMaybe) AppendMarshal(b []byte) []byte {
ret, _ := appendMsgHeader(b, TypeCallMeMaybe, v0, 0)
const epLength = 16 + 2 // 16 byte IP address + 2 byte port
func (m *CallMeMaybe) AppendMarshal(b []byte) []byte {
ret, p := appendMsgHeader(b, TypeCallMeMaybe, v0, epLength*len(m.MyNumber))
for _, ipp := range m.MyNumber {
a := ipp.IP.As16()
copy(p[:], a[:])
binary.BigEndian.PutUint16(p[16:], ipp.Port)
p = p[epLength:]
}
return ret
}
func parseCallMeMaybe(ver uint8, p []byte) (m *CallMeMaybe, err error) {
m = new(CallMeMaybe)
if len(p)%epLength != 0 || ver != 0 || len(p) == 0 {
return m, nil
}
m.MyNumber = make([]netaddr.IPPort, 0, len(p)/epLength)
for len(p) > 0 {
var a [16]byte
copy(a[:], p)
m.MyNumber = append(m.MyNumber, netaddr.IPPort{
IP: netaddr.IPFrom16(a),
Port: binary.BigEndian.Uint16(p[16:18]),
})
p = p[epLength:]
}
return m, nil
}
// Pong is a response a Ping.
//
// It includes the sender's source IP + port, so it's effectively a
@@ -171,7 +215,7 @@ func MessageSummary(m Message) string {
return fmt.Sprintf("ping tx=%x", m.TxID[:6])
case *Pong:
return fmt.Sprintf("pong tx=%x", m.TxID[:6])
case CallMeMaybe:
case *CallMeMaybe:
return "call-me-maybe"
default:
return fmt.Sprintf("%#v", m)

18
disco/disco_fuzzer.go Normal file
View File

@@ -0,0 +1,18 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// +build gofuzz
package disco
func Fuzz(data []byte) int {
m, _ := Parse(data)
newBytes := m.AppendMarshal(data)
parsedMarshall, _ := Parse(newBytes)
if m != parsedMarshall {
panic("Parsing error")
}
return 1
}

View File

@@ -44,9 +44,19 @@ func TestMarshalAndParse(t *testing.T) {
},
{
name: "call_me_maybe",
m: CallMeMaybe{},
m: &CallMeMaybe{},
want: "03 00",
},
{
name: "call_me_maybe_endpoints",
m: &CallMeMaybe{
MyNumber: []netaddr.IPPort{
netaddr.MustParseIPPort("1.2.3.4:567"),
netaddr.MustParseIPPort("[2001::3456]:789"),
},
},
want: "03 00 00 00 00 00 00 00 00 00 00 00 ff ff 01 02 03 04 02 37 20 01 00 00 00 00 00 00 00 00 00 00 00 00 34 56 03 15",
},
}
for _, tt := range tests {
t.Run(tt.name, func(t *testing.T) {

36
go.mod
View File

@@ -1,45 +1,47 @@
module tailscale.com
go 1.15
go 1.16
require (
github.com/alexbrainman/sspi v0.0.0-20180613141037-e580b900e9f5
github.com/anmitsu/go-shlex v0.0.0-20161002113705-648efa622239 // indirect
github.com/apenwarr/fixconsole v0.0.0-20191012055117-5a9f6489cc29
github.com/coreos/go-iptables v0.4.5
github.com/flynn/go-shlex v0.0.0-20150515145356-3f9db97f8568 // indirect
github.com/github/certstore v0.1.0
github.com/gliderlabs/ssh v0.2.2
github.com/go-multierror/multierror v1.0.2
github.com/go-ole/go-ole v1.2.4
github.com/godbus/dbus/v5 v5.0.3
github.com/golang/groupcache v0.0.0-20200121045136-8c9f03a8e57e
github.com/google/go-cmp v0.5.4
github.com/goreleaser/nfpm v1.1.10
github.com/jsimonetti/rtnetlink v0.0.0-20201216134343-bde56ed16391
github.com/jsimonetti/rtnetlink v0.0.0-20210212075122-66c871082f2b
github.com/klauspost/compress v1.10.10
github.com/kr/pty v1.1.1
github.com/mdlayher/netlink v1.2.0
github.com/kr/pty v1.1.8
github.com/mdlayher/netlink v1.3.2
github.com/mdlayher/sdnotify v0.0.0-20200625151349-e4a4f32afc4a
github.com/miekg/dns v1.1.30
github.com/pborman/getopt v0.0.0-20190409184431-ee0cd42419d3
github.com/peterbourgon/ff/v2 v2.0.0
github.com/pkg/errors v0.9.1 // indirect
github.com/tailscale/depaware v0.0.0-20201214215404-77d1e9757027
github.com/tailscale/wireguard-go v0.0.0-20201228234719-da0d2727455d
github.com/tailscale/wireguard-go v0.0.0-20210419202603-b32acd8f0292
github.com/tcnksm/go-httpstat v0.2.0
github.com/toqueteos/webbrowser v1.2.0
go4.org/intern v0.0.0-20201223061701-969c7e87e7cb // indirect
go4.org/mem v0.0.0-20201119185036-c04c5a6ff174
go4.org/unsafe/assume-no-moving-gc v0.0.0-20201222180813-1025295fd063 // indirect
golang.org/x/crypto v0.0.0-20201124201722-c8d3bf9c5392
golang.org/x/net v0.0.0-20201216054612-986b41b23924
golang.org/x/oauth2 v0.0.0-20200107190931-bf48bf16ab8d
golang.org/x/sync v0.0.0-20201020160332-67f06af15bc9
golang.org/x/sys v0.0.0-20201218084310-7d0127a74742
golang.org/x/term v0.0.0-20201207232118-ee85cb95a76b
golang.org/x/time v0.0.0-20191024005414-555d28b269f0
golang.org/x/crypto v0.0.0-20210317152858-513c2a44f670
golang.org/x/net v0.0.0-20210226172049-e18ecbb05110
golang.org/x/sync v0.0.0-20210220032951-036812b2e83c
golang.org/x/sys v0.0.0-20210403161142-5e06dd20ab57
golang.org/x/term v0.0.0-20210317153231-de623e64d2a6
golang.org/x/time v0.0.0-20210220033141-f8bda1e9f3ba
golang.org/x/tools v0.0.0-20201211185031-d93e913c1a58
golang.zx2c4.com/wireguard/windows v0.1.2-0.20201113162609-9b85be97fdf8
gopkg.in/yaml.v2 v2.2.8 // indirect
honnef.co/go/tools v0.1.0
inet.af/netaddr v0.0.0-20201231012616-c5dc91d2a016
inet.af/netaddr v0.0.0-20210222205655-a1ec2b7b8c44
inet.af/netstack v0.0.0-20210317161235-a1bf4e56ef22
inet.af/peercred v0.0.0-20210302202138-56e694897155
rsc.io/goversion v1.2.0
)
replace github.com/github/certstore => github.com/cyolosecurity/certstore v0.0.0-20200922073901-ece7f1d353c2

177
go.sum
View File

@@ -1,4 +1,3 @@
cloud.google.com/go v0.34.0/go.mod h1:aQUYkXzVsufM+DwF1aE+0xfcU+56JwCaLick0ClmMTw=
github.com/BurntSushi/toml v0.3.1 h1:WXkYYl6Yr3qBf1K79EBnL4mak0OimBfB0XUf9Vl28OQ=
github.com/BurntSushi/toml v0.3.1/go.mod h1:xHWCNGjB5oqiDr8zfno3MHue2Ht5sIBksp03qcyfWMU=
github.com/Masterminds/semver/v3 v3.0.3 h1:znjIyLfpXEDQjOIEWh+ehwpTU14UzUPub3c3sm36u14=
@@ -10,22 +9,24 @@ github.com/alexbrainman/sspi v0.0.0-20180613141037-e580b900e9f5 h1:P5U+E4x5OkVEK
github.com/alexbrainman/sspi v0.0.0-20180613141037-e580b900e9f5/go.mod h1:976q2ETgjT2snVCf2ZaBnyBbVoPERGjUz+0sofzEfro=
github.com/anmitsu/go-shlex v0.0.0-20161002113705-648efa622239 h1:kFOfPq6dUM1hTo4JG6LR5AXSUEsOjtdm0kw0FtQtMJA=
github.com/anmitsu/go-shlex v0.0.0-20161002113705-648efa622239/go.mod h1:2FmKhYUyUczH0OGQWaF5ceTx0UBShxjsH6f8oGKYe2c=
github.com/apenwarr/fixconsole v0.0.0-20191012055117-5a9f6489cc29 h1:muXWUcay7DDy1/hEQWrYlBy+g0EuwT70sBHg65SeUc4=
github.com/apenwarr/fixconsole v0.0.0-20191012055117-5a9f6489cc29/go.mod h1:JYWahgHer+Z2xbsgHPtaDYVWzeHDminu+YIBWkxpCAY=
github.com/apenwarr/w32 v0.0.0-20190407065021-aa00fece76ab h1:CMGzRRCjnD50RjUFSArBLuCxiDvdp7b8YPAcikBEQ+k=
github.com/apenwarr/w32 v0.0.0-20190407065021-aa00fece76ab/go.mod h1:nfFtvHn2Hgs9G1u0/J6LHQv//EksNC+7G8vXmd1VTJ8=
github.com/blakesmith/ar v0.0.0-20190502131153-809d4375e1fb h1:m935MPodAbYS46DG4pJSv7WO+VECIWUQ7OJYSoTrMh4=
github.com/blakesmith/ar v0.0.0-20190502131153-809d4375e1fb/go.mod h1:PkYb9DJNAwrSvRx5DYA+gUcOIgTGVMNkfSCbZM8cWpI=
github.com/cavaliercoder/go-cpio v0.0.0-20180626203310-925f9528c45e h1:hHg27A0RSSp2Om9lubZpiMgVbvn39bsUmW9U5h0twqc=
github.com/cavaliercoder/go-cpio v0.0.0-20180626203310-925f9528c45e/go.mod h1:oDpT4efm8tSYHXV5tHSdRvBet/b/QzxZ+XyyPehvm3A=
github.com/coreos/go-iptables v0.4.5 h1:DpHb9vJrZQEFMcVLFKAAGMUVX0XoRC0ptCthinRYm38=
github.com/coreos/go-iptables v0.4.5/go.mod h1:/mVI274lEDI2ns62jHCDnCyBF9Iwsmekav8Dbxlm1MU=
github.com/creack/pty v1.1.7 h1:6pwm8kMQKCmgUg0ZHTm5+/YvRK0s3THD/28+T6/kk4A=
github.com/creack/pty v1.1.7/go.mod h1:lj5s0c3V2DBrqTV7llrYr5NG6My20zk30Fl46Y7DoTY=
github.com/cyolosecurity/certstore v0.0.0-20200922073901-ece7f1d353c2 h1:TGPWAij+nY2FB7TlyUTqTmYvXJon/AZAfRMYc/76K80=
github.com/cyolosecurity/certstore v0.0.0-20200922073901-ece7f1d353c2/go.mod h1:Sgb3YVYOB2iCO06NJ6We5gjXe7uxxM3zPYoEXjuTKno=
github.com/davecgh/go-spew v1.1.0/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
github.com/dvyukov/go-fuzz v0.0.0-20201127111758-49e582c6c23d/go.mod h1:11Gm+ccJnvAhCNLlf5+cS9KjtbaD5I5zaZpFMsTHWTw=
github.com/flynn/go-shlex v0.0.0-20150515145356-3f9db97f8568 h1:BHsljHzVlRcyQhjrss6TZTdY2VfCqZPbv5k3iBFa2ZQ=
github.com/flynn/go-shlex v0.0.0-20150515145356-3f9db97f8568/go.mod h1:xEzjJPgXI435gkrCt3MPfRiAkVrwSbHsst4LCFVfpJc=
github.com/github/fakeca v0.1.0 h1:Km/MVOFvclqxPM9dZBC4+QE564nU4gz4iZ0D9pMw28I=
github.com/github/fakeca v0.1.0/go.mod h1:+bormgoGMMuamOscx7N91aOuUST7wdaJ2rNjeohylyo=
github.com/gliderlabs/ssh v0.2.2 h1:6zsha5zo/TWhRhwqCD3+EarCAgZ2yN28ipRnGPnwkI0=
github.com/gliderlabs/ssh v0.2.2/go.mod h1:U7qILu1NlMHj9FlMhZLlkCdDnU1DBEAqr0aevW3Awn0=
github.com/go-multierror/multierror v1.0.2 h1:AwsKbEXkmf49ajdFJgcFXqSG0aLo0HEyAE9zk9JguJo=
@@ -34,15 +35,11 @@ github.com/go-ole/go-ole v1.2.4 h1:nNBDSCOigTSiarFpYE9J/KtEA1IOW4CNeqT9TQDqCxI=
github.com/go-ole/go-ole v1.2.4/go.mod h1:XCwSNxSkXRo4vlyPy93sltvi/qJq0jqQhjqQNIwKuxM=
github.com/godbus/dbus/v5 v5.0.3 h1:ZqHaoEF7TBzh4jzPmqVhE/5A1z9of6orkAe5uHoAeME=
github.com/godbus/dbus/v5 v5.0.3/go.mod h1:xhWf0FNVPg57R7Z0UbKHbJfkEywrmjJnf7w5xrFpKfA=
github.com/golang/groupcache v0.0.0-20200121045136-8c9f03a8e57e h1:1r7pUrabqp18hOBcwBwiTsbnFeTZHV9eER/QT5JVZxY=
github.com/golang/groupcache v0.0.0-20200121045136-8c9f03a8e57e/go.mod h1:cIg4eruTrX1D+g88fzRXU5OdNfaM+9IcxsU14FzY7Hc=
github.com/golang/protobuf v1.2.0 h1:P3YflyNX/ehuJFLhxviNdFxQPkGK5cDcApsge1SqnvM=
github.com/golang/protobuf v1.2.0/go.mod h1:6lQm79b+lXiMfvg/cZm0SGofjICqVBUtrP5yJMmIC1U=
github.com/google/btree v1.0.1 h1:gK4Kx5IaGY9CD5sPJ36FHiBJ6ZXl0kilRiiCj+jdYp4=
github.com/google/btree v1.0.1/go.mod h1:xXMiIv4Fb/0kKde4SpL7qlzvu5cMJDRkFDxJfI9uaxA=
github.com/google/go-cmp v0.2.0/go.mod h1:oXzfMopK8JAjlY9xF4vHSVASa0yLyX7SntLO5aqRK0M=
github.com/google/go-cmp v0.3.1/go.mod h1:8QqcDgzrUqlUb/G2PQTWiueGozuR1884gddMywk6iLU=
github.com/google/go-cmp v0.4.0 h1:xsAVV57WRhGj6kEIi8ReJzQlHHqcBYCElAvkovg3B/4=
github.com/google/go-cmp v0.4.0/go.mod h1:v8dTdLbMG2kIc/vJvl+f65V22dbkXbowE6jgT/gNBxE=
github.com/google/go-cmp v0.5.0 h1:/QaMHBdZ26BB3SSst0Iwl10Epc+xhTquomWX0oZEB6w=
github.com/google/go-cmp v0.5.0/go.mod h1:v8dTdLbMG2kIc/vJvl+f65V22dbkXbowE6jgT/gNBxE=
github.com/google/go-cmp v0.5.2/go.mod h1:v8dTdLbMG2kIc/vJvl+f65V22dbkXbowE6jgT/gNBxE=
github.com/google/go-cmp v0.5.4 h1:L8R9j+yAqZuZjsqh/z+F1NCffTKKLShY6zXTItVIZ8M=
@@ -54,34 +51,44 @@ github.com/goreleaser/nfpm v1.1.10 h1:0nwzKUJTcygNxTzVKq2Dh9wpVP1W2biUH6SNKmoxR3
github.com/goreleaser/nfpm v1.1.10/go.mod h1:oOcoGRVwvKIODz57NUfiRwFWGfn00NXdgnn6MrYtO5k=
github.com/imdario/mergo v0.3.8 h1:CGgOkSJeqMRmt0D9XLWExdT4m4F1vd3FV3VPt+0VxkQ=
github.com/imdario/mergo v0.3.8/go.mod h1:2EnlNZ0deacrJVfApfmtdGgDfMuh/nq6Ok1EcJh5FfA=
github.com/josharian/native v0.0.0-20200817173448-b6b71def0850 h1:uhL5Gw7BINiiPAo24A2sxkcDI0Jt/sqp1v5xQCniEFA=
github.com/josharian/native v0.0.0-20200817173448-b6b71def0850/go.mod h1:7X/raswPFr05uY3HiLlYeyQntB6OO7E/d2Cu7qoaN2w=
github.com/jsimonetti/rtnetlink v0.0.0-20190606172950-9527aa82566a/go.mod h1:Oz+70psSo5OFh8DBl0Zv2ACw7Esh6pPUphlvZG9x7uw=
github.com/jsimonetti/rtnetlink v0.0.0-20200117123717-f846d4f6c1f4 h1:nwOc1YaOrYJ37sEBrtWZrdqzK22hiJs3GpDmP3sR2Yw=
github.com/jsimonetti/rtnetlink v0.0.0-20200117123717-f846d4f6c1f4/go.mod h1:WGuG/smIU4J/54PblvSbh+xvCZmpJnFgr3ds6Z55XMQ=
github.com/jsimonetti/rtnetlink v0.0.0-20201009170750-9c6f07d100c1/go.mod h1:hqoO/u39cqLeBLebZ8fWdE96O7FxrAsRYhnVOdgHxok=
github.com/jsimonetti/rtnetlink v0.0.0-20201216134343-bde56ed16391 h1:Dqu/4JhMV1vpXHDjzQCuDCEsjNi0xfuSmQlMOyqayKA=
github.com/jsimonetti/rtnetlink v0.0.0-20201216134343-bde56ed16391/go.mod h1:cR77jAZG3Y3bsb8hF6fHJbFoyFukLFOkQ98S0pQz3xw=
github.com/jsimonetti/rtnetlink v0.0.0-20201220180245-69540ac93943/go.mod h1:z4c53zj6Eex712ROyh8WI0ihysb5j2ROyV42iNogmAs=
github.com/jsimonetti/rtnetlink v0.0.0-20210122163228-8d122574c736/go.mod h1:ZXpIyOK59ZnN7J0BV99cZUPmsqDRZ3eq5X+st7u/oSA=
github.com/jsimonetti/rtnetlink v0.0.0-20210212075122-66c871082f2b h1:c3NTyLNozICy8B4mlMXemD3z/gXgQzVXZS/HqT+i3do=
github.com/jsimonetti/rtnetlink v0.0.0-20210212075122-66c871082f2b/go.mod h1:8w9Rh8m+aHZIG69YPGGem1i5VzoyRC8nw2kA8B+ik5U=
github.com/kisielk/gotool v1.0.0/go.mod h1:XhKaO+MFFWcvkIS/tQcRk01m1F5IRFswLeQ+oQHNcck=
github.com/klauspost/compress v1.10.10 h1:a/y8CglcM7gLGYmlbP/stPE5sR3hbhFRUjCBfd/0B3I=
github.com/klauspost/compress v1.10.10/go.mod h1:aoV0uJVorq1K+umq18yTdKaF57EivdYsUV+/s2qKfXs=
github.com/kr/pretty v0.1.0 h1:L/CwN0zerZDmRFUapSPitk6f+Q3+0za1rQkzVuMiMFI=
github.com/kr/pretty v0.1.0/go.mod h1:dAy3ld7l9f0ibDNOQOHHMYYIIbhfbHSm3C4ZsoJORNo=
github.com/kr/pty v1.1.1 h1:VkoXIwSboBpnk99O/KFauAEILuNHv5DVFKZMBN/gUgw=
github.com/kr/pty v1.1.1/go.mod h1:pFQYn66WHrOpPYNljwOMqo10TkYh1fy3cYio2l3bCsQ=
github.com/kr/pty v1.1.8 h1:AkaSdXYQOWeaO3neb8EM634ahkXXe3jYbVh/F9lq+GI=
github.com/kr/pty v1.1.8/go.mod h1:O1sed60cT9XZ5uDucP5qwvh+TE3NnUj51EiZO/lmSfw=
github.com/kr/text v0.1.0 h1:45sCR5RtlFHMR4UwH9sdQ5TC8v0qDQCHnXt+kaKSTVE=
github.com/kr/text v0.1.0/go.mod h1:4Jbv+DJW3UT/LiOwJeYQe1efqtUx/iVham/4vfdArNI=
github.com/lxn/walk v0.0.0-20191128110447-55ccb3a9f5c1/go.mod h1:E23UucZGqpuUANJooIbHWCufXvOcT6E7Stq81gU+CSQ=
github.com/lxn/walk v0.0.0-20201110160827-18ea5e372cdb/go.mod h1:E23UucZGqpuUANJooIbHWCufXvOcT6E7Stq81gU+CSQ=
github.com/lxn/win v0.0.0-20191128105842-2da648fda5b4/go.mod h1:ouWl4wViUNh8tPSIwxTVMuS014WakR1hqvBc2I0bMoA=
github.com/lxn/win v0.0.0-20201111105847-2a20daff6a55/go.mod h1:KxxjdtRkfNoYDCUP5ryK7XJJNTnpC8atvtmTheChOtk=
github.com/mattn/go-zglob v0.0.1 h1:xsEx/XUoVlI6yXjqBK062zYhRTZltCNmYPx6v+8DNaY=
github.com/mattn/go-zglob v0.0.1/go.mod h1:9fxibJccNxU2cnpIKLRRFA7zX7qhkJIQWBb449FYHOo=
github.com/mdlayher/ethtool v0.0.0-20210210192532-2b88debcdd43 h1:WgyLFv10Ov49JAQI/ZLUkCZ7VJS3r74hwFIGXJsgZlY=
github.com/mdlayher/ethtool v0.0.0-20210210192532-2b88debcdd43/go.mod h1:+t7E0lkKfbBsebllff1xdTmyJt8lH37niI6kwFk9OTo=
github.com/mdlayher/genetlink v1.0.0 h1:OoHN1OdyEIkScEmRgxLEe2M9U8ClMytqA5niynLtfj0=
github.com/mdlayher/genetlink v1.0.0/go.mod h1:0rJ0h4itni50A86M2kHcgS85ttZazNt7a8H2a2cw0Gc=
github.com/mdlayher/netlink v0.0.0-20190409211403-11939a169225/go.mod h1:eQB3mZE4aiYnlUsyGGCOpPETfdQq4Jhsgf1fk3cwQaA=
github.com/mdlayher/netlink v1.0.0/go.mod h1:KxeJAFOFLG6AjpyDkQ/iIhxygIUKD+vcwqcnu43w/+M=
github.com/mdlayher/netlink v1.1.0 h1:mpdLgm+brq10nI9zM1BpX1kpDbh3NLl3RSnVq6ZSkfg=
github.com/mdlayher/netlink v1.1.0/go.mod h1:H4WCitaheIsdF9yOYu8CFmCgQthAPIWZmcKp9uZHgmY=
github.com/mdlayher/netlink v1.1.1/go.mod h1:WTYpFb/WTvlRJAyKhZL5/uy69TDDpHHu2VZmb2XgV7o=
github.com/mdlayher/netlink v1.2.0 h1:zPolhRjfuabdf8ofZsl56eoU+92cvSlAn13lw4veCZ0=
github.com/mdlayher/netlink v1.2.0/go.mod h1:kwVW1io0AZy9A1E2YYgaD4Cj+C+GPkU6klXCMzIJ9p8=
github.com/mdlayher/netlink v1.2.1/go.mod h1:bacnNlfhqHqqLo4WsYeXSqfyXkInQ9JneWI68v1KwSU=
github.com/mdlayher/netlink v1.2.2-0.20210123213345-5cc92139ae3e/go.mod h1:bacnNlfhqHqqLo4WsYeXSqfyXkInQ9JneWI68v1KwSU=
github.com/mdlayher/netlink v1.3.0/go.mod h1:xK/BssKuwcRXHrtN04UBkwQ6dY9VviGGuriDdoPSWys=
github.com/mdlayher/netlink v1.3.2 h1:fMZOU2/M7PRMzGM3br5l1N2fu6bPSHtRytmQ338a9iA=
github.com/mdlayher/netlink v1.3.2/go.mod h1:dRJi5IABcZpBD2A3D0Mv/AiX8I9uDEu5oGkAVrekmf8=
github.com/mdlayher/sdnotify v0.0.0-20200625151349-e4a4f32afc4a h1:wMv2mvcHRH4jqIxaVL5t6gSq1hjPiaWH7TOcA0Z+uNo=
github.com/mdlayher/sdnotify v0.0.0-20200625151349-e4a4f32afc4a/go.mod h1:HtjVsQfsrBm1GDcDTUFn4ZXhftxTwO/hxrvEiRc61U4=
github.com/miekg/dns v1.1.30 h1:Qww6FseFn8PRfw07jueqIXqodm0JKiiKuK0DeXSqfyo=
@@ -95,8 +102,9 @@ github.com/peterbourgon/ff/v2 v2.0.0 h1:lx0oYI5qr/FU1xnpNhQ+EZM04gKgn46jyYvGEEqB
github.com/peterbourgon/ff/v2 v2.0.0/go.mod h1:xjwr+t+SjWm4L46fcj/D+Ap+6ME7+HqFzaP22pP5Ggk=
github.com/pkg/diff v0.0.0-20200914180035-5b29258ca4f7 h1:+/+DxvQaYifJ+grD4klzrS5y+KJXldn/2YTl5JG+vZ8=
github.com/pkg/diff v0.0.0-20200914180035-5b29258ca4f7/go.mod h1:zO8QMzTeZd5cpnIkz/Gn6iK0jDfGicM1nynOkkPIl28=
github.com/pkg/errors v0.8.1 h1:iURUrRGxPUNPdy5/HRSm+Yj6okJ6UtLINN0Q9M4+h3I=
github.com/pkg/errors v0.8.1/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0=
github.com/pkg/errors v0.9.1 h1:FEBLx1zS214owpjy7qsBeixbURkuhQAwrK5UwLGTwt4=
github.com/pkg/errors v0.9.1/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0=
github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
github.com/rogpeppe/go-internal v1.3.0/go.mod h1:M8bDsm7K2OlrFYOpmOWEs/qY81heoFRclV5y23lUDJ4=
@@ -107,15 +115,32 @@ github.com/sergi/go-diff v1.0.0/go.mod h1:0CfEIISq7TuYL3j771MWULgwwjU+GofnZX9QAm
github.com/stretchr/objx v0.1.0/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
github.com/stretchr/testify v1.4.0 h1:2E4SXV/wtOkTonXsotYi4li6zVWxYlZuYNCXe9XRJyk=
github.com/stretchr/testify v1.4.0/go.mod h1:j7eGeouHqKxXV5pUuKE4zz7dFj8WfuZ+81PSLYec5m4=
github.com/tailscale/depaware v0.0.0-20201003033024-5d95aab075be/go.mod h1:jissDaJNHiyV2tFdr3QyNEfsZrax/i2yQiSO+CljThI=
github.com/tailscale/depaware v0.0.0-20201214215404-77d1e9757027 h1:lK99QQdH3yBWY6aGilF+IRlQIdmhzLrsEmF6JgN+Ryw=
github.com/tailscale/depaware v0.0.0-20201214215404-77d1e9757027/go.mod h1:p9lPsd+cx33L3H9nNoecRRxPssFKUwwI50I3pZ0yT+8=
github.com/tailscale/wireguard-go v0.0.0-20201220011020-db78fad0bebf h1:HuBwLWbDNIh/G72KSImSEx+dnd7FPGFI1e60LMJtLjU=
github.com/tailscale/wireguard-go v0.0.0-20201220011020-db78fad0bebf/go.mod h1:9PbAnF5CAklkURoO0uQhm+YUjDmm9T9oCyTGlCHuTPQ=
github.com/tailscale/wireguard-go v0.0.0-20201228234719-da0d2727455d h1:ha3qx0YBsEYM1VpLoAxVyLsz74H2a/Kv/id+2Bo/WLU=
github.com/tailscale/wireguard-go v0.0.0-20201228234719-da0d2727455d/go.mod h1:FEGDKc5yHNWtTS5ugWnHMNF0d9LlaHv/zQwOrVogo2U=
github.com/tailscale/wireguard-go v0.0.20201119-0.20201228205120-066446d1733a h1:RUJeuZlAm1DT6Mhk9UTsaHrDeDZhPrbKfNsaEtKF6+0=
github.com/tailscale/wireguard-go v0.0.20201119-0.20201228205120-066446d1733a/go.mod h1:UIAx57STfAZOrNVj8QGP2zG3ovWPMTD4DDubFHqMlYI=
github.com/tailscale/wireguard-go v0.0.0-20210210202228-3cc76ed5f222 h1:VzTS7LIwCH8jlxwrZguU0TsCLV/MDOunoNIDJdFajyM=
github.com/tailscale/wireguard-go v0.0.0-20210210202228-3cc76ed5f222/go.mod h1:6t0OVdJwFOKFnvaHaVMKG6GznWaHqkmiR2n3kH0t924=
github.com/tailscale/wireguard-go v0.0.0-20210324165952-2963b66bc23a h1:tQ7Y0ALSe5109GMFB7TVtfNBsVcAuM422hVSJrXWMTE=
github.com/tailscale/wireguard-go v0.0.0-20210324165952-2963b66bc23a/go.mod h1:6t0OVdJwFOKFnvaHaVMKG6GznWaHqkmiR2n3kH0t924=
github.com/tailscale/wireguard-go v0.0.0-20210327173134-f6a42a1646a0 h1:7KFBvUmm3TW/K+bAN22D7M6xSSoY/39s+PajaNBGrLw=
github.com/tailscale/wireguard-go v0.0.0-20210327173134-f6a42a1646a0/go.mod h1:6t0OVdJwFOKFnvaHaVMKG6GznWaHqkmiR2n3kH0t924=
github.com/tailscale/wireguard-go v0.0.0-20210330185929-1689f2635004 h1:GNEPNdNHsYe5zhoR/0z2Pl/a9zXbr0IySmHV6PhCrzI=
github.com/tailscale/wireguard-go v0.0.0-20210330185929-1689f2635004/go.mod h1:6t0OVdJwFOKFnvaHaVMKG6GznWaHqkmiR2n3kH0t924=
github.com/tailscale/wireguard-go v0.0.0-20210330200845-4914b4a944c4 h1:7Y0H5NzrV3fwHeDrUXDFcTy8QNbAEDwr+qHyOfX4VyE=
github.com/tailscale/wireguard-go v0.0.0-20210330200845-4914b4a944c4/go.mod h1:6t0OVdJwFOKFnvaHaVMKG6GznWaHqkmiR2n3kH0t924=
github.com/tailscale/wireguard-go v0.0.0-20210401164443-2d6878b6b30d h1:zbDBqtYvc492gcRL5BB7AO5Aed+aVht2jbYg8SKoMYs=
github.com/tailscale/wireguard-go v0.0.0-20210401164443-2d6878b6b30d/go.mod h1:6t0OVdJwFOKFnvaHaVMKG6GznWaHqkmiR2n3kH0t924=
github.com/tailscale/wireguard-go v0.0.0-20210401172819-1aca620a8afb h1:6TGRROCOrjTKbt1ucBTZaDMBeScG6yVEXEjuabOiBzU=
github.com/tailscale/wireguard-go v0.0.0-20210401172819-1aca620a8afb/go.mod h1:jy12FSeiDLRvS7VQvSoiaqH9WtpapbrC8YSzyZ7fUAk=
github.com/tailscale/wireguard-go v0.0.0-20210401194826-bb7bc2f24083 h1:e3k65apTVs7NM6mhQ1c94XISLe+2gdizPfRdsImNL8Y=
github.com/tailscale/wireguard-go v0.0.0-20210401194826-bb7bc2f24083/go.mod h1:jy12FSeiDLRvS7VQvSoiaqH9WtpapbrC8YSzyZ7fUAk=
github.com/tailscale/wireguard-go v0.0.0-20210402173217-0a47c6e64d15 h1:13GZsTKbCmPGwDBurcSXT+ssYID2IfcX0MfsvhaaagY=
github.com/tailscale/wireguard-go v0.0.0-20210402173217-0a47c6e64d15/go.mod h1:jy12FSeiDLRvS7VQvSoiaqH9WtpapbrC8YSzyZ7fUAk=
github.com/tailscale/wireguard-go v0.0.0-20210402193818-fc309421dd43 h1:SRUknVD6AHsxfghv0By9SFjQ8dhn8K8gIFwxf3OEPyU=
github.com/tailscale/wireguard-go v0.0.0-20210402193818-fc309421dd43/go.mod h1:g3WdWX37upLnDT8STKFWhvA34Gwrt4hIpnWR3HGufpM=
github.com/tailscale/wireguard-go v0.0.0-20210403171604-17614717a9b5 h1:FegsXWjtyhCxpB8bBSL1kLzagtV+e7BaX07phMM8uQM=
github.com/tailscale/wireguard-go v0.0.0-20210403171604-17614717a9b5/go.mod h1:ys4yUmhKncXy1jWP34qUHKipRjl322VVhxoh1Rkfo7c=
github.com/tailscale/wireguard-go v0.0.0-20210419202603-b32acd8f0292 h1:rKgYi0k3TNqEz5f7sc6zNeufZcnxm1Efd6bb39cGGkY=
github.com/tailscale/wireguard-go v0.0.0-20210419202603-b32acd8f0292/go.mod h1:ys4yUmhKncXy1jWP34qUHKipRjl322VVhxoh1Rkfo7c=
github.com/tcnksm/go-httpstat v0.2.0 h1:rP7T5e5U2HfmOBmZzGgGZjBQ5/GluWUylujl0tJ04I0=
github.com/tcnksm/go-httpstat v0.2.0/go.mod h1:s3JVJFtQxtBEBC9dwcdTTXS9xFnM3SXAZwPG41aurT8=
github.com/toqueteos/webbrowser v1.2.0 h1:tVP/gpK69Fx+qMJKsLE7TD8LuGWPnEV71wBN9rrstGQ=
@@ -126,36 +151,29 @@ github.com/xi2/xz v0.0.0-20171230120015-48954b6210f8 h1:nIPpBwaJSVYIxUFsDv3M8ofm
github.com/xi2/xz v0.0.0-20171230120015-48954b6210f8/go.mod h1:HUYIGzjTL3rfEspMxjDjgmT5uz5wzYJKVo23qUhYTos=
github.com/yuin/goldmark v1.1.27/go.mod h1:3hX8gzYuyVAZsxl0MRgGTJEmQBFcNTphYh9decYSb74=
github.com/yuin/goldmark v1.2.1/go.mod h1:3hX8gzYuyVAZsxl0MRgGTJEmQBFcNTphYh9decYSb74=
go4.org/intern v0.0.0-20201223054237-ef8cbcb8edd7 h1:yeDrXaQ3VRXbTN7lHj70DxW4LdPow83MVwPPRjpP70U=
go4.org/intern v0.0.0-20201223054237-ef8cbcb8edd7/go.mod h1:vLqJ+12kCw61iCWsPto0EOHhBS+o4rO5VIucbc9g2Cc=
go4.org/intern v0.0.0-20201223061701-969c7e87e7cb h1:yuqO0E4bHRsTPUocDpRKXfLE40lwWplVxENQ2WOV7Gc=
go4.org/intern v0.0.0-20201223061701-969c7e87e7cb/go.mod h1:vLqJ+12kCw61iCWsPto0EOHhBS+o4rO5VIucbc9g2Cc=
go4.org/mem v0.0.0-20200706164138-185c595c3ecc/go.mod h1:NEYvpHWemiG/E5UWfaN5QAIGZeT1sa0Z2UNk6oeMb/k=
go4.org/intern v0.0.0-20210108033219-3eb7198706b2 h1:VFTf+jjIgsldaz/Mr00VaCSswHJrI2hIjQygE/W4IMg=
go4.org/intern v0.0.0-20210108033219-3eb7198706b2/go.mod h1:vLqJ+12kCw61iCWsPto0EOHhBS+o4rO5VIucbc9g2Cc=
go4.org/mem v0.0.0-20201119185036-c04c5a6ff174 h1:vSug/WNOi2+4jrKdivxayTN/zd8EA1UrStjpWvvo1jk=
go4.org/mem v0.0.0-20201119185036-c04c5a6ff174/go.mod h1:reUoABIJ9ikfM5sgtSF3Wushcza7+WeD01VB9Lirh3g=
go4.org/unsafe/assume-no-moving-gc v0.0.0-20201222175341-b30ae309168e h1:ExUmGi0ZsQmiVo9giDQqXkr7vreeXPMkOGIusfsfbzI=
go4.org/unsafe/assume-no-moving-gc v0.0.0-20201222175341-b30ae309168e/go.mod h1:FftLjUGFEDu5k8lt0ddY+HcrH/qU/0qk+H8j9/nTl3E=
go4.org/unsafe/assume-no-moving-gc v0.0.0-20201222180813-1025295fd063 h1:1tk03FUNpulq2cuWpXZWj649rwJpk0d20rxWiopKRmc=
go4.org/unsafe/assume-no-moving-gc v0.0.0-20201222180813-1025295fd063/go.mod h1:FftLjUGFEDu5k8lt0ddY+HcrH/qU/0qk+H8j9/nTl3E=
golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
golang.org/x/crypto v0.0.0-20190510104115-cbcb75029529/go.mod h1:yigFU9vqHzYiE8UmvKecakEJjdnWj3jj499lnFckfCI=
golang.org/x/crypto v0.0.0-20191002192127-34f69633bfdc/go.mod h1:yigFU9vqHzYiE8UmvKecakEJjdnWj3jj499lnFckfCI=
golang.org/x/crypto v0.0.0-20191011191535-87dc89f01550/go.mod h1:yigFU9vqHzYiE8UmvKecakEJjdnWj3jj499lnFckfCI=
golang.org/x/crypto v0.0.0-20200429183012-4b2356b1ed79/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
golang.org/x/crypto v0.0.0-20200709230013-948cd5f35899/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
golang.org/x/crypto v0.0.0-20201016220609-9e8e0b390897/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
golang.org/x/crypto v0.0.0-20201112155050-0c6587e931a9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
golang.org/x/crypto v0.0.0-20201124201722-c8d3bf9c5392 h1:xYJJ3S178yv++9zXV/hnr29plCAGO9vAFG9dorqaFQc=
golang.org/x/crypto v0.0.0-20201124201722-c8d3bf9c5392/go.mod h1:jdWPYTVW3xRLrWPugEBEK3UY2ZEsg3UU495nc5E+M+I=
golang.org/x/mod v0.0.0-20190513183733-4bf6d317e70e/go.mod h1:mXi4GBBbnImb6dmsKGUJ2LatrhH/nqhxcFungHvyanc=
golang.org/x/crypto v0.0.0-20201117144127-c1f2f97bffc9/go.mod h1:jdWPYTVW3xRLrWPugEBEK3UY2ZEsg3UU495nc5E+M+I=
golang.org/x/crypto v0.0.0-20201221181555-eec23a3978ad/go.mod h1:jdWPYTVW3xRLrWPugEBEK3UY2ZEsg3UU495nc5E+M+I=
golang.org/x/crypto v0.0.0-20210220033148-5ea612d1eb83/go.mod h1:jdWPYTVW3xRLrWPugEBEK3UY2ZEsg3UU495nc5E+M+I=
golang.org/x/crypto v0.0.0-20210317152858-513c2a44f670 h1:gzMM0EjIYiRmJI3+jBdFuoynZlpxa2JQZsolKu09BXo=
golang.org/x/crypto v0.0.0-20210317152858-513c2a44f670/go.mod h1:T9bdIzuCu7OtxOm1hfPfRQxPLYneinmdGuTeoZ9dtd4=
golang.org/x/mod v0.1.1-0.20191105210325-c90efee705ee/go.mod h1:QqPTAvyqsEbceGzBzNggFXnrqF1CaUcvgkdR5Ot7KZg=
golang.org/x/mod v0.2.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
golang.org/x/mod v0.3.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
golang.org/x/mod v0.4.0 h1:8pl+sMODzuvGJkmj2W4kZihvVb5mKm8pB/X44PIQHv8=
golang.org/x/mod v0.4.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
golang.org/x/net v0.0.0-20180724234803-3673e40ba225/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
golang.org/x/net v0.0.0-20190108225652-1e06a53dbb7e/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
golang.org/x/net v0.0.0-20190311183353-d8887717615a/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
golang.org/x/net v0.0.0-20190620200207-3b0461eec859/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
@@ -164,67 +182,66 @@ golang.org/x/net v0.0.0-20190923162816-aa69164e4478/go.mod h1:z5CRVTTTmAJ677TzLL
golang.org/x/net v0.0.0-20191007182048-72f939374954/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
golang.org/x/net v0.0.0-20200202094626-16171245cfb2/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
golang.org/x/net v0.0.0-20200226121028-0de0cce0169b/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
golang.org/x/net v0.0.0-20200501053045-e0ff5e5a1de5/go.mod h1:qpuaurCH72eLCgpAm/N6yyVIVM9cpaDIP3A8BGJEC5A=
golang.org/x/net v0.0.0-20200707034311-ab3426394381/go.mod h1:/O7V0waA8r7cgGh81Ro3o1hOxt32SMVPicZroKQ2sZA=
golang.org/x/net v0.0.0-20200822124328-c89045814202/go.mod h1:/O7V0waA8r7cgGh81Ro3o1hOxt32SMVPicZroKQ2sZA=
golang.org/x/net v0.0.0-20201010224723-4f7140c49acb/go.mod h1:sp8m0HH+o8qH0wwXwYZr8TS3Oi6o0r6Gce1SSxlDquU=
golang.org/x/net v0.0.0-20201021035429-f5854403a974/go.mod h1:sp8m0HH+o8qH0wwXwYZr8TS3Oi6o0r6Gce1SSxlDquU=
golang.org/x/net v0.0.0-20201031054903-ff519b6c9102/go.mod h1:sp8m0HH+o8qH0wwXwYZr8TS3Oi6o0r6Gce1SSxlDquU=
golang.org/x/net v0.0.0-20201110031124-69a78807bb2b h1:uwuIcX0g4Yl1NC5XAz37xsr2lTtcqevgzYNVt49waME=
golang.org/x/net v0.0.0-20201110031124-69a78807bb2b/go.mod h1:sp8m0HH+o8qH0wwXwYZr8TS3Oi6o0r6Gce1SSxlDquU=
golang.org/x/net v0.0.0-20201216054612-986b41b23924 h1:QsnDpLLOKwHBBDa8nDws4DYNc/ryVW2vCpxCs09d4PY=
golang.org/x/net v0.0.0-20201216054612-986b41b23924/go.mod h1:m0MpNAwzfU5UDzcl9v0D8zg8gWTRqZa9RBIspLL5mdg=
golang.org/x/oauth2 v0.0.0-20200107190931-bf48bf16ab8d h1:TzXSXBo42m9gQenoE3b9BGiEpg5IG2JkU5FkPIawgtw=
golang.org/x/oauth2 v0.0.0-20200107190931-bf48bf16ab8d/go.mod h1:gOpvHmFTYa4IltrdGE7lF6nIHvwfUNPOp7c8zoXwtLw=
golang.org/x/sync v0.0.0-20181221193216-37e7f081c4d4/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/net v0.0.0-20201224014010-6772e930b67b/go.mod h1:m0MpNAwzfU5UDzcl9v0D8zg8gWTRqZa9RBIspLL5mdg=
golang.org/x/net v0.0.0-20210119194325-5f4716e94777/go.mod h1:m0MpNAwzfU5UDzcl9v0D8zg8gWTRqZa9RBIspLL5mdg=
golang.org/x/net v0.0.0-20210226172049-e18ecbb05110 h1:qWPm9rbaAMKs8Bq/9LRpbMqxWRVUAQwMI9fVrssnTfw=
golang.org/x/net v0.0.0-20210226172049-e18ecbb05110/go.mod h1:m0MpNAwzfU5UDzcl9v0D8zg8gWTRqZa9RBIspLL5mdg=
golang.org/x/sync v0.0.0-20190423024810-112230192c58/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20190911185100-cd5d95a43a6e/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20200625203802-6e8e738ad208/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20201020160332-67f06af15bc9 h1:SQFwaSi55rU7vdNs9Yr0Z324VNlrF+0wMqRXT4St8ck=
golang.org/x/sync v0.0.0-20201020160332-67f06af15bc9/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20210220032951-036812b2e83c h1:5KslGYwFpkhGh+Q16bwMP3cOontH8FOep7tGV86Y7SQ=
golang.org/x/sync v0.0.0-20210220032951-036812b2e83c/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
golang.org/x/sys v0.0.0-20190312061237-fead79001313/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20190405154228-4b34438f7a67/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20190411185658-b44545bcd369/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20190826190057-c7b8b68b1456/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20190904154756-749cb33beabd/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20190924154521-2837fb4f24fe/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20191008105621-543471e840be/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20191026070338-33540a1f6037/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200202164722-d101bd2416d5/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200323222414-85ca7c5b95cd/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200501145240-bc7a7d42d5c3/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200728102440-3e129f6d46b1/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200812155832-6a926be9bd1d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200930185726-fdedc70b468f/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20201009025420-dfb3f7c4e634/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20201018230417-eeed37f84f13/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20201107080550-4d91cf3a1aaf/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20201112073958-5cba982894dd/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20201117222635-ba5294a509c7/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20201118182958-a01c418693c7/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20201119102817-f84b799fce68/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20201202213521-69691e467435/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20201218084310-7d0127a74742 h1:+CBz4km/0KPU3RGTwARGh/noP3bEwtHcq+0YcBQM2JQ=
golang.org/x/sys v0.0.0-20201218084310-7d0127a74742/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210105210732-16f7687f5001/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210110051926-789bb1bd4061/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210123111255-9b0068b26619/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210124154548-22da62e12c0c/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210216163648-f7da38b97c65/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210301091718-77cc2087c03b/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210309040221-94ec62e08169/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210316164454-77fc1eacc6aa/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210317225723-c4fcb01b228e h1:XNp2Flc/1eWQGk5BLzqTAN7fQIwIbfyVTuVxXxZh73M=
golang.org/x/sys v0.0.0-20210317225723-c4fcb01b228e/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210402192133-700132347e07 h1:4k6HsQjxj6hVMsI2Vf0yKlzt5lXxZsMW1q0zaq2k8zY=
golang.org/x/sys v0.0.0-20210402192133-700132347e07/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20210403161142-5e06dd20ab57 h1:F5Gozwx4I1xtr/sr/8CFbb57iKi3297KFs0QDbGN60A=
golang.org/x/sys v0.0.0-20210403161142-5e06dd20ab57/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/term v0.0.0-20201117132131-f5c789dd3221/go.mod h1:Nr5EML6q2oocZ2LXRh80K7BxOlk5/8JxuGnuhpl+muw=
golang.org/x/term v0.0.0-20201126162022-7de9c90e9dd1/go.mod h1:bj7SfCRtBDWHUb9snDiAeCFNEtKQo2Wmx5Cou7ajbmo=
golang.org/x/term v0.0.0-20201207232118-ee85cb95a76b h1:a0ErnNnPKmhDyIXQvdZr+Lq8dc8xpMeqkF8y5PgQU4Q=
golang.org/x/term v0.0.0-20201207232118-ee85cb95a76b/go.mod h1:bj7SfCRtBDWHUb9snDiAeCFNEtKQo2Wmx5Cou7ajbmo=
golang.org/x/term v0.0.0-20210317153231-de623e64d2a6 h1:EC6+IGYTjPpRfv9a2b/6Puw0W+hLtAhkV1tPsXhutqs=
golang.org/x/term v0.0.0-20210317153231-de623e64d2a6/go.mod h1:bj7SfCRtBDWHUb9snDiAeCFNEtKQo2Wmx5Cou7ajbmo=
golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
golang.org/x/text v0.3.2/go.mod h1:bEr9sfX3Q8Zfm5fL9x+3itogRgK3+ptLWKqgva+5dAk=
golang.org/x/text v0.3.3/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
golang.org/x/text v0.3.4 h1:0YWbFKbhXG/wIiuHDSKpS0Iy7FSA+u45VtBMfQcFTTc=
golang.org/x/text v0.3.4/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
golang.org/x/time v0.0.0-20191024005414-555d28b269f0 h1:/5xXl8Y5W96D+TtHSlonuFqGHIWVuyCkGJLwGh9JJFs=
golang.org/x/time v0.0.0-20191024005414-555d28b269f0/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ=
golang.org/x/time v0.0.0-20210220033141-f8bda1e9f3ba h1:O8mE0/t419eoIwhTFpKVkHiTs/Igowgfkj25AcZrtiE=
golang.org/x/time v0.0.0-20210220033141-f8bda1e9f3ba/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ=
golang.org/x/tools v0.0.0-20180917221912-90fa682c2a6e/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
golang.org/x/tools v0.0.0-20191119224855-298f0cb1881e/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
golang.org/x/tools v0.0.0-20191130070609-6e064ea0cf2d/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
golang.org/x/tools v0.0.0-20191216052735-49a3e744a425/go.mod h1:TB2adYChydJhpapKDTa4BR/hXlZSLoq2Wpct/0txZ28=
golang.org/x/tools v0.0.0-20200609164405-eb789aa7ce50/go.mod h1:EkVYQZoAsY45+roYkvgYkIh4xh/qjgUK9TdY2XT94GE=
golang.org/x/tools v0.0.0-20201001230009-b5b87423c93b/go.mod h1:z6u4i615ZeAfBE4XtMziQW1fSVJXACjjbWkB/mvPzlU=
golang.org/x/tools v0.0.0-20201002184944-ecd9fd270d5d/go.mod h1:z6u4i615ZeAfBE4XtMziQW1fSVJXACjjbWkB/mvPzlU=
golang.org/x/tools v0.0.0-20201211185031-d93e913c1a58 h1:1Bs6RVeBFtLZ8Yi1Hk07DiOqzvwLD/4hln4iahvFlag=
golang.org/x/tools v0.0.0-20201211185031-d93e913c1a58/go.mod h1:emZCQorbCU4vsT4fOWvOPXz4eW1wZW4PmDk9uLelYpA=
golang.org/x/xerrors v0.0.0-20190717185122-a985d3407aa7/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
@@ -232,36 +249,28 @@ golang.org/x/xerrors v0.0.0-20191011141410-1b5146add898/go.mod h1:I/5z698sn9Ka8T
golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1 h1:go1bK/D/BFZV2I8cIQd1NKEZ+0owSTG1fDTci4IqFcE=
golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
golang.zx2c4.com/wireguard v0.0.20200321-0.20200715051853-507f148e1c42/go.mod h1:GJvYs5O24/ASlwPiRklVnjMx2xQzrOic0DuU6GvYJL4=
golang.zx2c4.com/wireguard v0.0.20200321-0.20201111175144-60b3766b89b9 h1:qowcZ56hhpeoESmWzI4Exhx4Y78TpCyXUJur4/c0CoE=
golang.zx2c4.com/wireguard v0.0.20200321-0.20201111175144-60b3766b89b9/go.mod h1:LMeNfjlcPZTrBC1juwgbQyA4Zy2XVcsrdO/fIJxwyuA=
golang.zx2c4.com/wireguard/windows v0.1.2-0.20201004085714-dd60d0447f81/go.mod h1:GaK5zcgr5XE98WaRzIDilumDBp5/yP8j2kG/LCDnvAM=
golang.zx2c4.com/wireguard v0.0.20201118/go.mod h1:Dz+cq5bnrai9EpgYj4GDof/+qaGzbRWbeaAOs1bUYa0=
golang.zx2c4.com/wireguard/windows v0.1.2-0.20201113162609-9b85be97fdf8 h1:nlXPqGA98n+qcq1pwZ28KjM5EsFQvamKS00A+VUeVjs=
golang.zx2c4.com/wireguard/windows v0.1.2-0.20201113162609-9b85be97fdf8/go.mod h1:psva4yDnAHLuh7lUzOK7J7bLYxNFfo0iKWz+mi9gzkA=
google.golang.org/appengine v1.4.0/go.mod h1:xpcJRLb0r/rnEns0DIKYYv+WjYCduHsrkT7/EB5XEv4=
gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
gopkg.in/check.v1 v1.0.0-20180628173108-788fd7840127/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
gopkg.in/check.v1 v1.0.0-20190902080502-41f04d3bba15 h1:YR8cESwS4TdDjEe65xsg0ogRM/Nc3DYOhEAlW+xobZo=
gopkg.in/check.v1 v1.0.0-20190902080502-41f04d3bba15/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
gopkg.in/errgo.v2 v2.1.0/go.mod h1:hNsd1EY+bozCKY1Ytp96fpM3vjJbqLJn88ws8XvfDNI=
gopkg.in/yaml.v2 v2.2.2/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
gopkg.in/yaml.v2 v2.2.4/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
gopkg.in/yaml.v2 v2.2.7 h1:VUgggvou5XRW9mHwD/yXxIYSMtY0zoKQf/v226p2nyo=
gopkg.in/yaml.v2 v2.2.7/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
honnef.co/go/tools v0.0.1-2020.1.4/go.mod h1:X/FiERA/W4tHapMX5mGpAtMSVEeEUOyHaw9vFzvIQ3k=
gopkg.in/yaml.v2 v2.2.8 h1:obN1ZagJSUGI0Ek/LBmuj4SNLPfIny3KsKFopxRdj10=
gopkg.in/yaml.v2 v2.2.8/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
honnef.co/go/tools v0.1.0 h1:AWNL1W1i7f0wNZ8VwOKNJ0sliKvOF/adn0EHenfUh+c=
honnef.co/go/tools v0.1.0/go.mod h1:XtegFAyX/PfluP4921rXU5IkjkqBCDnUq4W8VCIoKvM=
inet.af/netaddr v0.0.0-20200810144936-56928fe48a98/go.mod h1:qqYzz/2whtrbWJvt+DNWQyvekNN4ePQZcg2xc2/Yjww=
inet.af/netaddr v0.0.0-20201218162718-658fec415e52/go.mod h1:qqYzz/2whtrbWJvt+DNWQyvekNN4ePQZcg2xc2/Yjww=
inet.af/netaddr v0.0.0-20201223185330-97d366981fac h1:aqMW8vft7VmOIhtQhsTWhAuZzOBGYBv+Otyvwj+VGSU=
inet.af/netaddr v0.0.0-20201223185330-97d366981fac/go.mod h1:9NdhtHLglxJliAZB6aC5ws3mfnUArdAzHG/iJq7cB/o=
inet.af/netaddr v0.0.0-20201224214825-a55841caa437 h1:Li2QBwaT/hU3wE7GdyoqaX+TzIlI+V1zs/CuWrjX8e4=
inet.af/netaddr v0.0.0-20201224214825-a55841caa437/go.mod h1:9NdhtHLglxJliAZB6aC5ws3mfnUArdAzHG/iJq7cB/o=
inet.af/netaddr v0.0.0-20201226233944-2d1876c01610 h1:9Nnw3NS9SL4SlFtBWSdv7onMbdY+B8nflRNZvhgxuMY=
inet.af/netaddr v0.0.0-20201226233944-2d1876c01610/go.mod h1:9NdhtHLglxJliAZB6aC5ws3mfnUArdAzHG/iJq7cB/o=
inet.af/netaddr v0.0.0-20201228234250-33d0a924ebbf h1:0eHZ8v6j5wIiOVyoYPd70ueZ/RPEQtRlzi60uneDbRU=
inet.af/netaddr v0.0.0-20201228234250-33d0a924ebbf/go.mod h1:9NdhtHLglxJliAZB6aC5ws3mfnUArdAzHG/iJq7cB/o=
inet.af/netaddr v0.0.0-20201231012616-c5dc91d2a016 h1:CEeeAJW60aRKE6gGJC5krs2xC/uM2l8SasvgeDXFN5Q=
inet.af/netaddr v0.0.0-20201231012616-c5dc91d2a016/go.mod h1:lbePDLSB5c45kkUmF7ETNE5X9z/yuQvWJIv1hhb5rFI=
inet.af/netaddr v0.0.0-20210222205655-a1ec2b7b8c44 h1:p7fX77zWzZMuNdJUhniBsmN1OvFOrW9SOtvgnzqUZX4=
inet.af/netaddr v0.0.0-20210222205655-a1ec2b7b8c44/go.mod h1:I2i9ONCXRZDnG1+7O8fSuYzjcPxHQXrIfzD/IkR87x4=
inet.af/netstack v0.0.0-20210317161235-a1bf4e56ef22 h1:DNtszwGa6w76qlIr+PbPEnlBJdiRV8SaxeigOy0q1gg=
inet.af/netstack v0.0.0-20210317161235-a1bf4e56ef22/go.mod h1:GVx+5OZtbG4TVOW5ilmyRZAZXr1cNwfqUEkTOtWK0PM=
inet.af/peercred v0.0.0-20210302202138-56e694897155 h1:KojYNEYqDkZ2O3LdyTstR1l13L3ePKTIEM2h7ONkfkE=
inet.af/peercred v0.0.0-20210302202138-56e694897155/go.mod h1:FjawnflS/udxX+SvpsMgZfdqx2aykOlkISeAsADi5IU=
rsc.io/goversion v1.2.0 h1:SPn+NLTiAG7w30IRK/DKp1BjvpWabYgxlLp/+kx5J8w=
rsc.io/goversion v1.2.0/go.mod h1:Eih9y/uIBS3ulggl7KNJ09xGSLcuNaLgmvvqa07sgfo=
tailscale.com v1.2.10/go.mod h1:JEJiCce3MHtPCTdX2ahLc4tcnxZ7b5etish1Yt0B6+w=

277
health/health.go Normal file
View File

@@ -0,0 +1,277 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Package health is a registry for other packages to report & check
// overall health status of the node.
package health
import (
"errors"
"fmt"
"sort"
"sync"
"time"
"github.com/go-multierror/multierror"
"tailscale.com/tailcfg"
)
var (
// mu guards everything in this var block.
mu sync.Mutex
sysErr = map[Subsystem]error{} // error key => err (or nil for no error)
watchers = map[*watchHandle]func(Subsystem, error){} // opt func to run if error state changes
timer *time.Timer
inMapPoll bool
inMapPollSince time.Time
lastMapPollEndedAt time.Time
lastStreamedMapResponse time.Time
derpHomeRegion int
derpRegionConnected = map[int]bool{}
derpRegionLastFrame = map[int]time.Time{}
lastMapRequestHeard time.Time // time we got a 200 from control for a MapRequest
ipnState string
ipnWantRunning bool
anyInterfaceUp = true // until told otherwise
)
// Subsystem is the name of a subsystem whose health can be monitored.
type Subsystem string
const (
// SysOverall is the name representing the overall health of
// the system, rather than one particular subsystem.
SysOverall = Subsystem("overall")
// SysRouter is the name the wgengine/router subsystem.
SysRouter = Subsystem("router")
// SysDNS is the name of the net/dns subsystem.
SysDNS = Subsystem("dns")
// SysNetworkCategory is the name of the subsystem that sets
// the Windows network adapter's "category" (public, private, domain).
// If it's unhealthy, the Windows firewall rules won't match.
SysNetworkCategory = Subsystem("network-category")
)
type watchHandle byte
// RegisterWatcher adds a function that will be called if an
// error changes state either to unhealthy or from unhealthy. It is
// not called on transition from unknown to healthy. It must be non-nil
// and is run in its own goroutine. The returned func unregisters it.
func RegisterWatcher(cb func(key Subsystem, err error)) (unregister func()) {
mu.Lock()
defer mu.Unlock()
handle := new(watchHandle)
watchers[handle] = cb
if timer == nil {
timer = time.AfterFunc(time.Minute, timerSelfCheck)
}
return func() {
mu.Lock()
defer mu.Unlock()
delete(watchers, handle)
if len(watchers) == 0 && timer != nil {
timer.Stop()
timer = nil
}
}
}
// SetRouterHealth sets the state of the wgengine/router.Router.
func SetRouterHealth(err error) { set(SysRouter, err) }
// RouterHealth returns the wgengine/router.Router error state.
func RouterHealth() error { return get(SysRouter) }
// SetDNSHealth sets the state of the net/dns.Manager
func SetDNSHealth(err error) { set(SysDNS, err) }
// DNSHealth returns the net/dns.Manager error state.
func DNSHealth() error { return get(SysDNS) }
// SetNetworkCategoryHealth sets the state of setting the network adaptor's category.
// This only applies on Windows.
func SetNetworkCategoryHealth(err error) { set(SysNetworkCategory, err) }
func NetworkCategoryHealth() error { return get(SysNetworkCategory) }
func get(key Subsystem) error {
mu.Lock()
defer mu.Unlock()
return sysErr[key]
}
func set(key Subsystem, err error) {
mu.Lock()
defer mu.Unlock()
setLocked(key, err)
}
func setLocked(key Subsystem, err error) {
old, ok := sysErr[key]
if !ok && err == nil {
// Initial happy path.
sysErr[key] = nil
selfCheckLocked()
return
}
if ok && (old == nil) == (err == nil) {
// No change in overall error status (nil-vs-not), so
// don't run callbacks, but exact error might've
// changed, so note it.
if err != nil {
sysErr[key] = err
}
return
}
sysErr[key] = err
selfCheckLocked()
for _, cb := range watchers {
go cb(key, err)
}
}
// GotStreamedMapResponse notes that we got a tailcfg.MapResponse
// message in streaming mode, even if it's just a keep-alive message.
func GotStreamedMapResponse() {
mu.Lock()
defer mu.Unlock()
lastStreamedMapResponse = time.Now()
selfCheckLocked()
}
// SetInPollNetMap records that we're in
func SetInPollNetMap(v bool) {
mu.Lock()
defer mu.Unlock()
if v == inMapPoll {
return
}
inMapPoll = v
if v {
inMapPollSince = time.Now()
} else {
lastMapPollEndedAt = time.Now()
}
}
// SetMagicSockDERPHome notes what magicsock's view of its home DERP is.
func SetMagicSockDERPHome(region int) {
mu.Lock()
defer mu.Unlock()
derpHomeRegion = region
selfCheckLocked()
}
// NoteMapRequestHeard notes whenever we successfully sent a map request
// to control for which we received a 200 response.
func NoteMapRequestHeard(mr *tailcfg.MapRequest) {
mu.Lock()
defer mu.Unlock()
// TODO: extract mr.HostInfo.NetInfo.PreferredDERP, compare
// against SetMagicSockDERPHome and
// SetDERPRegionConnectedState
lastMapRequestHeard = time.Now()
selfCheckLocked()
}
func SetDERPRegionConnectedState(region int, connected bool) {
mu.Lock()
defer mu.Unlock()
derpRegionConnected[region] = connected
selfCheckLocked()
}
func NoteDERPRegionReceivedFrame(region int) {
mu.Lock()
defer mu.Unlock()
derpRegionLastFrame[region] = time.Now()
selfCheckLocked()
}
// state is an ipn.State.String() value: "Running", "Stopped", "NeedsLogin", etc.
func SetIPNState(state string, wantRunning bool) {
mu.Lock()
defer mu.Unlock()
ipnState = state
ipnWantRunning = wantRunning
selfCheckLocked()
}
// SetAnyInterfaceUp sets whether any network interface is up.
func SetAnyInterfaceUp(up bool) {
mu.Lock()
defer mu.Unlock()
anyInterfaceUp = up
selfCheckLocked()
}
func timerSelfCheck() {
mu.Lock()
defer mu.Unlock()
selfCheckLocked()
if timer != nil {
timer.Reset(time.Minute)
}
}
func selfCheckLocked() {
if ipnState == "" {
// Don't check yet.
return
}
setLocked(SysOverall, overallErrorLocked())
}
func overallErrorLocked() error {
if !anyInterfaceUp {
return errors.New("network down")
}
if ipnState != "Running" || !ipnWantRunning {
return fmt.Errorf("state=%v, wantRunning=%v", ipnState, ipnWantRunning)
}
now := time.Now()
if !inMapPoll && (lastMapPollEndedAt.IsZero() || now.Sub(lastMapPollEndedAt) > 10*time.Second) {
return errors.New("not in map poll")
}
const tooIdle = 2*time.Minute + 5*time.Second
if d := now.Sub(lastStreamedMapResponse).Round(time.Second); d > tooIdle {
return fmt.Errorf("no map response in %v", d)
}
rid := derpHomeRegion
if rid == 0 {
return errors.New("no DERP home")
}
if !derpRegionConnected[rid] {
return fmt.Errorf("not connected to home DERP region %v", rid)
}
if d := now.Sub(derpRegionLastFrame[rid]).Round(time.Second); d > tooIdle {
return fmt.Errorf("haven't heard from home DERP region %v in %v", rid, d)
}
// TODO: use
_ = inMapPollSince
_ = lastMapPollEndedAt
_ = lastStreamedMapResponse
_ = lastMapRequestHeard
var errs []error
for sys, err := range sysErr {
if err == nil || sys == SysOverall {
continue
}
errs = append(errs, fmt.Errorf("%v: %w", sys, err))
}
sort.Slice(errs, func(i, j int) bool {
// Not super efficient (stringifying these in a sort), but probably max 2 or 3 items.
return errs[i].Error() < errs[j].Error()
})
return multierror.New(errs)
}

View File

@@ -8,10 +8,9 @@ import (
"bytes"
"testing"
"github.com/tailscale/wireguard-go/wgcfg"
"inet.af/netaddr"
"tailscale.com/wgengine/router"
"tailscale.com/wgengine/router/dns"
"tailscale.com/wgengine/wgcfg"
)
func TestDeepPrint(t *testing.T) {
@@ -36,24 +35,18 @@ func TestDeepPrint(t *testing.T) {
func getVal() []interface{} {
return []interface{}{
&wgcfg.Config{
Name: "foo",
Addresses: []netaddr.IPPrefix{{Bits: 5, IP: netaddr.IPFrom16([16]byte{3: 3})}},
ListenPort: 5,
Name: "foo",
Addresses: []netaddr.IPPrefix{{Bits: 5, IP: netaddr.IPFrom16([16]byte{3: 3})}},
Peers: []wgcfg.Peer{
{
Endpoints: []wgcfg.Endpoint{
{
Host: "foo",
Port: 5,
},
},
Endpoints: "foo:5",
},
},
},
&router.Config{
DNS: dns.Config{
Nameservers: []netaddr.IP{netaddr.IPv4(8, 8, 8, 8)},
Domains: []string{"tailscale.net"},
Routes: []netaddr.IPPrefix{
netaddr.MustParseIPPrefix("1.2.3.0/24"),
netaddr.MustParseIPPrefix("1234::/64"),
},
},
map[string]string{

View File

@@ -5,16 +5,13 @@
package ipn
import (
"net/http"
"time"
"golang.org/x/oauth2"
"tailscale.com/control/controlclient"
"tailscale.com/ipn/ipnstate"
"tailscale.com/tailcfg"
"tailscale.com/types/empty"
"tailscale.com/types/netmap"
"tailscale.com/types/structs"
"tailscale.com/wgengine"
)
type State int
@@ -29,7 +26,7 @@ const (
Running
)
// GoogleIDToken Type is the oauth2.Token.TokenType for the Google
// GoogleIDToken Type is the tailcfg.Oauth2Token.TokenType for the Google
// ID tokens used by the Android client.
const GoogleIDTokenType = "ts_android_google_login"
@@ -46,10 +43,10 @@ func (s State) String() string {
// EngineStatus contains WireGuard engine stats.
type EngineStatus struct {
RBytes, WBytes wgengine.ByteCount
RBytes, WBytes int64
NumLive int
LiveDERPs int // number of active DERP connections
LivePeers map[tailcfg.NodeKey]wgengine.PeerStatus
LivePeers map[tailcfg.NodeKey]ipnstate.PeerStatusLite
}
// Notify is a communication from a backend (e.g. tailscaled) to a frontend
@@ -59,18 +56,29 @@ type EngineStatus struct {
// They are JSON-encoded on the wire, despite the lack of struct tags.
type Notify struct {
_ structs.Incomparable
Version string // version number of IPN backend
ErrMessage *string // critical error message, if any; for InUseOtherUser, the details
LoginFinished *empty.Message // event: non-nil when login process succeeded
State *State // current IPN state has changed
Prefs *Prefs // preferences were changed
NetMap *controlclient.NetworkMap // new netmap received
Engine *EngineStatus // wireguard engine stats
Status *ipnstate.Status // full status
BrowseToURL *string // UI should open a browser right now
BackendLogID *string // public logtail id used by backend
Version string // version number of IPN backend
ErrMessage *string // critical error message, if any; for InUseOtherUser, the details
LoginFinished *empty.Message // event: non-nil when login process succeeded
State *State // current IPN state has changed
Prefs *Prefs // preferences were changed
NetMap *netmap.NetworkMap // new netmap received
Engine *EngineStatus // wireguard engine stats
BrowseToURL *string // UI should open a browser right now
BackendLogID *string // public logtail id used by backend
PingResult *ipnstate.PingResult
// FilesWaiting if non-nil means that files are buffered in
// the Tailscale daemon and ready for local transfer to the
// user's preferred storage location.
FilesWaiting *empty.Message `json:",omitempty"`
// IncomingFiles, if non-nil, specifies which files are in the
// process of being received. A nil IncomingFiles means this
// Notify should not update the state of file transfers. A non-nil
// but empty IncomingFiles means that no files are in the middle
// of being transferred.
IncomingFiles []PartialFile `json:",omitempty"`
// LocalTCPPort, if non-nil, informs the UI frontend which
// (non-zero) localhost TCP port it's listening on.
// This is currently only used by Tailscale when run in the
@@ -80,6 +88,24 @@ type Notify struct {
// type is mirrored in xcode/Shared/IPN.swift
}
// PartialFile represents an in-progress file transfer.
type PartialFile struct {
Name string // e.g. "foo.jpg"
Started time.Time // time transfer started
DeclaredSize int64 // or -1 if unknown
Received int64 // bytes copied thus far
// PartialPath is set non-empty in "direct" file mode to the
// in-progress '*.partial' file's path when the peerapi isn't
// being used; see LocalBackend.SetDirectFileRoot.
PartialPath string `json:",omitempty"`
// Done is set in "direct" mode when the partial file has been
// closed and is ready for the caller to rename away the
// ".partial" suffix.
Done bool `json:",omitempty"`
}
// StateKey is an opaque identifier for a set of LocalBackend state
// (preferences, private keys, etc.).
//
@@ -115,19 +141,6 @@ type Options struct {
// AuthKey is an optional node auth key used to authorize a
// new node key without user interaction.
AuthKey string
// LegacyConfigPath optionally specifies the old-style relaynode
// relay.conf location. If both LegacyConfigPath and StateKey are
// specified and the requested state doesn't exist in the backend
// store, the backend migrates the config from LegacyConfigPath.
//
// TODO(danderson): remove some time after the transition to
// tailscaled is done.
LegacyConfigPath string
// Notify is called when backend events happen.
Notify func(Notify) `json:"-"`
// HTTPTestClient is an optional HTTP client to pass to controlclient
// (for tests only).
HTTPTestClient *http.Client
}
// Backend is the interface between Tailscale frontends
@@ -136,6 +149,9 @@ type Options struct {
// (It has nothing to do with the interface between the backends
// and the cloud control plane.)
type Backend interface {
// SetNotifyCallback sets the callback to be called on updates
// from the backend to the client.
SetNotifyCallback(func(Notify))
// Start starts or restarts the backend, typically when a
// frontend client connects.
Start(Options) error
@@ -144,7 +160,7 @@ type Backend interface {
// eventually.
StartLoginInteractive()
// Login logs in with an OAuth2 token.
Login(token *oauth2.Token)
Login(token *tailcfg.Oauth2Token)
// Logout terminates the current login session and stops the
// wireguard engine.
Logout()
@@ -152,17 +168,11 @@ type Backend interface {
// WantRunning. This may cause the wireguard engine to
// reconfigure or stop.
SetPrefs(*Prefs)
// SetWantRunning is like SetPrefs but sets only the
// WantRunning field.
SetWantRunning(wantRunning bool)
// RequestEngineStatus polls for an update from the wireguard
// engine. Only needed if you want to display byte
// counts. Connection events are emitted automatically without
// polling.
RequestEngineStatus()
// RequestStatus requests that a full Status update
// notification is sent.
RequestStatus()
// FakeExpireAfter pretends that the current key is going to
// expire after duration x. This is useful for testing GUIs to
// make sure they react properly with keys that are going to
@@ -171,5 +181,5 @@ type Backend interface {
// Ping attempts to start connecting to the given IP and sends a Notify
// with its PingResult. If the host is down, there might never
// be a PingResult sent. The cmd/tailscale CLI client adds a timeout.
Ping(ip string)
Ping(ip string, useTSMP bool)
}

View File

@@ -5,12 +5,11 @@
package ipn
import (
"log"
"time"
"golang.org/x/oauth2"
"tailscale.com/control/controlclient"
"tailscale.com/ipn/ipnstate"
"tailscale.com/tailcfg"
"tailscale.com/types/netmap"
)
type FakeBackend struct {
@@ -20,19 +19,29 @@ type FakeBackend struct {
}
func (b *FakeBackend) Start(opts Options) error {
b.serverURL = opts.Prefs.ControlURL
if opts.Notify == nil {
log.Fatalf("FakeBackend.Start: opts.Notify is nil\n")
b.serverURL = opts.Prefs.ControlURLOrDefault()
if b.notify == nil {
panic("FakeBackend.Start: SetNotifyCallback not called")
}
b.notify = opts.Notify
b.notify(Notify{Prefs: opts.Prefs})
nl := NeedsLogin
b.notify(Notify{State: &nl})
if b.notify != nil {
b.notify(Notify{Prefs: opts.Prefs})
b.notify(Notify{State: &nl})
}
return nil
}
func (b *FakeBackend) SetNotifyCallback(notify func(Notify)) {
if notify == nil {
panic("FakeBackend.SetNotifyCallback: notify is nil")
}
b.notify = notify
}
func (b *FakeBackend) newState(s State) {
b.notify(Notify{State: &s})
if b.notify != nil {
b.notify(Notify{State: &s})
}
if s == Running {
b.live = true
} else {
@@ -42,11 +51,13 @@ func (b *FakeBackend) newState(s State) {
func (b *FakeBackend) StartLoginInteractive() {
u := b.serverURL + "/this/is/fake"
b.notify(Notify{BrowseToURL: &u})
if b.notify != nil {
b.notify(Notify{BrowseToURL: &u})
}
b.login()
}
func (b *FakeBackend) Login(token *oauth2.Token) {
func (b *FakeBackend) Login(token *tailcfg.Oauth2Token) {
b.login()
}
@@ -54,10 +65,14 @@ func (b *FakeBackend) login() {
b.newState(NeedsMachineAuth)
b.newState(Stopped)
// TODO(apenwarr): Fill in a more interesting netmap here.
b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
if b.notify != nil {
b.notify(Notify{NetMap: &netmap.NetworkMap{}})
}
b.newState(Starting)
// TODO(apenwarr): Fill in a more interesting status.
b.notify(Notify{Engine: &EngineStatus{}})
if b.notify != nil {
b.notify(Notify{Engine: &EngineStatus{}})
}
b.newState(Running)
}
@@ -70,7 +85,9 @@ func (b *FakeBackend) SetPrefs(new *Prefs) {
panic("FakeBackend.SetPrefs got nil prefs")
}
b.notify(Notify{Prefs: new.Clone()})
if b.notify != nil {
b.notify(Notify{Prefs: new.Clone()})
}
if new.WantRunning && !b.live {
b.newState(Starting)
b.newState(Running)
@@ -79,22 +96,20 @@ func (b *FakeBackend) SetPrefs(new *Prefs) {
}
}
func (b *FakeBackend) SetWantRunning(v bool) {
b.SetPrefs(&Prefs{WantRunning: v})
}
func (b *FakeBackend) RequestEngineStatus() {
b.notify(Notify{Engine: &EngineStatus{}})
}
func (b *FakeBackend) RequestStatus() {
b.notify(Notify{Status: &ipnstate.Status{}})
if b.notify != nil {
b.notify(Notify{Engine: &EngineStatus{}})
}
}
func (b *FakeBackend) FakeExpireAfter(x time.Duration) {
b.notify(Notify{NetMap: &controlclient.NetworkMap{}})
if b.notify != nil {
b.notify(Notify{NetMap: &netmap.NetworkMap{}})
}
}
func (b *FakeBackend) Ping(ip string) {
b.notify(Notify{PingResult: &ipnstate.PingResult{}})
func (b *FakeBackend) Ping(ip string, useTSMP bool) {
if b.notify != nil {
b.notify(Notify{PingResult: &ipnstate.PingResult{}})
}
}

View File

@@ -8,32 +8,33 @@ import (
"sync"
"time"
"golang.org/x/oauth2"
"inet.af/netaddr"
"tailscale.com/control/controlclient"
"tailscale.com/tailcfg"
"tailscale.com/types/logger"
"tailscale.com/types/netmap"
)
type Handle struct {
frontendLogID string
b Backend
xnotify func(Notify)
logf logger.Logf
b Backend
logf logger.Logf
// Mutex protects everything below
mu sync.Mutex
netmapCache *controlclient.NetworkMap
xnotify func(Notify)
frontendLogID string
netmapCache *netmap.NetworkMap
engineStatusCache EngineStatus
stateCache State
prefsCache *Prefs
}
func NewHandle(b Backend, logf logger.Logf, opts Options) (*Handle, error) {
func NewHandle(b Backend, logf logger.Logf, notify func(Notify), opts Options) (*Handle, error) {
h := &Handle{
b: b,
logf: logf,
}
h.SetNotifyCallback(notify)
err := h.Start(opts)
if err != nil {
return nil, err
@@ -42,18 +43,25 @@ func NewHandle(b Backend, logf logger.Logf, opts Options) (*Handle, error) {
return h, nil
}
func (h *Handle) SetNotifyCallback(notify func(Notify)) {
h.mu.Lock()
h.xnotify = notify
h.mu.Unlock()
h.b.SetNotifyCallback(h.notify)
}
func (h *Handle) Start(opts Options) error {
h.mu.Lock()
h.frontendLogID = opts.FrontendLogID
h.xnotify = opts.Notify
h.netmapCache = nil
h.engineStatusCache = EngineStatus{}
h.stateCache = NoState
if opts.Prefs != nil {
h.prefsCache = opts.Prefs.Clone()
}
xopts := opts
xopts.Notify = h.notify
return h.b.Start(xopts)
h.mu.Unlock()
return h.b.Start(opts)
}
func (h *Handle) Reset() {
@@ -129,7 +137,7 @@ func (h *Handle) LocalAddrs() []netaddr.IPPrefix {
return []netaddr.IPPrefix{}
}
func (h *Handle) NetMap() *controlclient.NetworkMap {
func (h *Handle) NetMap() *netmap.NetworkMap {
h.mu.Lock()
defer h.mu.Unlock()
@@ -148,14 +156,14 @@ func (h *Handle) Expiry() time.Time {
}
func (h *Handle) AdminPageURL() string {
return h.prefsCache.ControlURL + "/admin/machines"
return h.prefsCache.ControlURLOrDefault() + "/admin/machines"
}
func (h *Handle) StartLoginInteractive() {
h.b.StartLoginInteractive()
}
func (h *Handle) Login(token *oauth2.Token) {
func (h *Handle) Login(token *tailcfg.Oauth2Token) {
h.b.Login(token)
}
@@ -167,10 +175,6 @@ func (h *Handle) RequestEngineStatus() {
h.b.RequestEngineStatus()
}
func (h *Handle) RequestStatus() {
h.b.RequestStatus()
}
func (h *Handle) FakeExpireAfter(x time.Duration) {
h.b.FakeExpireAfter(x)
}

2481
ipn/ipnlocal/local.go Normal file

File diff suppressed because it is too large Load Diff

421
ipn/ipnlocal/local_test.go Normal file
View File

@@ -0,0 +1,421 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package ipnlocal
import (
"reflect"
"testing"
"inet.af/netaddr"
"tailscale.com/net/interfaces"
"tailscale.com/net/tsaddr"
"tailscale.com/tailcfg"
"tailscale.com/types/netmap"
"tailscale.com/wgengine/wgcfg"
)
func TestNetworkMapCompare(t *testing.T) {
prefix1, err := netaddr.ParseIPPrefix("192.168.0.0/24")
if err != nil {
t.Fatal(err)
}
node1 := &tailcfg.Node{Addresses: []netaddr.IPPrefix{prefix1}}
prefix2, err := netaddr.ParseIPPrefix("10.0.0.0/8")
if err != nil {
t.Fatal(err)
}
node2 := &tailcfg.Node{Addresses: []netaddr.IPPrefix{prefix2}}
tests := []struct {
name string
a, b *netmap.NetworkMap
want bool
}{
{
"both nil",
nil,
nil,
true,
},
{
"b nil",
&netmap.NetworkMap{},
nil,
false,
},
{
"a nil",
nil,
&netmap.NetworkMap{},
false,
},
{
"both default",
&netmap.NetworkMap{},
&netmap.NetworkMap{},
true,
},
{
"names identical",
&netmap.NetworkMap{Name: "map1"},
&netmap.NetworkMap{Name: "map1"},
true,
},
{
"names differ",
&netmap.NetworkMap{Name: "map1"},
&netmap.NetworkMap{Name: "map2"},
false,
},
{
"Peers identical",
&netmap.NetworkMap{Peers: []*tailcfg.Node{}},
&netmap.NetworkMap{Peers: []*tailcfg.Node{}},
true,
},
{
"Peer list length",
// length of Peers list differs
&netmap.NetworkMap{Peers: []*tailcfg.Node{{}}},
&netmap.NetworkMap{Peers: []*tailcfg.Node{}},
false,
},
{
"Node names identical",
&netmap.NetworkMap{Peers: []*tailcfg.Node{&tailcfg.Node{Name: "A"}}},
&netmap.NetworkMap{Peers: []*tailcfg.Node{&tailcfg.Node{Name: "A"}}},
true,
},
{
"Node names differ",
&netmap.NetworkMap{Peers: []*tailcfg.Node{&tailcfg.Node{Name: "A"}}},
&netmap.NetworkMap{Peers: []*tailcfg.Node{&tailcfg.Node{Name: "B"}}},
false,
},
{
"Node lists identical",
&netmap.NetworkMap{Peers: []*tailcfg.Node{node1, node1}},
&netmap.NetworkMap{Peers: []*tailcfg.Node{node1, node1}},
true,
},
{
"Node lists differ",
&netmap.NetworkMap{Peers: []*tailcfg.Node{node1, node1}},
&netmap.NetworkMap{Peers: []*tailcfg.Node{node1, node2}},
false,
},
{
"Node Users differ",
// User field is not checked.
&netmap.NetworkMap{Peers: []*tailcfg.Node{&tailcfg.Node{User: 0}}},
&netmap.NetworkMap{Peers: []*tailcfg.Node{&tailcfg.Node{User: 1}}},
true,
},
}
for _, tt := range tests {
got := dnsMapsEqual(tt.a, tt.b)
if got != tt.want {
t.Errorf("%s: Equal = %v; want %v", tt.name, got, tt.want)
}
}
}
func inRemove(ip netaddr.IP) bool {
for _, pfx := range removeFromDefaultRoute {
if pfx.Contains(ip) {
return true
}
}
return false
}
func TestShrinkDefaultRoute(t *testing.T) {
tests := []struct {
route string
in []string
out []string
localIPFn func(netaddr.IP) bool // true if this machine's local IP address should be "in" after shrinking.
}{
{
route: "0.0.0.0/0",
in: []string{"1.2.3.4", "25.0.0.1"},
out: []string{
"10.0.0.1",
"10.255.255.255",
"192.168.0.1",
"192.168.255.255",
"172.16.0.1",
"172.31.255.255",
"100.101.102.103",
"224.0.0.1",
"169.254.169.254",
// Some random IPv6 stuff that shouldn't be in a v4
// default route.
"fe80::",
"2601::1",
},
localIPFn: func(ip netaddr.IP) bool { return !inRemove(ip) && ip.Is4() },
},
{
route: "::/0",
in: []string{"::1", "2601::1"},
out: []string{
"fe80::1",
"ff00::1",
tsaddr.TailscaleULARange().IP.String(),
},
localIPFn: func(ip netaddr.IP) bool { return !inRemove(ip) && ip.Is6() },
},
}
for _, test := range tests {
def := netaddr.MustParseIPPrefix(test.route)
got, err := shrinkDefaultRoute(def)
if err != nil {
t.Fatalf("shrinkDefaultRoute(%q): %v", test.route, err)
}
for _, ip := range test.in {
if !got.Contains(netaddr.MustParseIP(ip)) {
t.Errorf("shrink(%q).Contains(%v) = false, want true", test.route, ip)
}
}
for _, ip := range test.out {
if got.Contains(netaddr.MustParseIP(ip)) {
t.Errorf("shrink(%q).Contains(%v) = true, want false", test.route, ip)
}
}
ips, _, err := interfaces.LocalAddresses()
if err != nil {
t.Fatal(err)
}
for _, ip := range ips {
want := test.localIPFn(ip)
if gotContains := got.Contains(ip); gotContains != want {
t.Errorf("shrink(%q).Contains(%v) = %v, want %v", test.route, ip, gotContains, want)
}
}
}
}
func TestPeerRoutes(t *testing.T) {
pp := netaddr.MustParseIPPrefix
tests := []struct {
name string
peers []wgcfg.Peer
want []netaddr.IPPrefix
}{
{
name: "small_v4",
peers: []wgcfg.Peer{
{
AllowedIPs: []netaddr.IPPrefix{
pp("100.101.102.103/32"),
},
},
},
want: []netaddr.IPPrefix{
pp("100.101.102.103/32"),
},
},
{
name: "big_v4",
peers: []wgcfg.Peer{
{
AllowedIPs: []netaddr.IPPrefix{
pp("100.101.102.103/32"),
pp("100.101.102.104/32"),
pp("100.101.102.105/32"),
},
},
},
want: []netaddr.IPPrefix{
pp("100.64.0.0/10"),
},
},
{
name: "has_1_v6",
peers: []wgcfg.Peer{
{
AllowedIPs: []netaddr.IPPrefix{
pp("fd7a:115c:a1e0:ab12:4843:cd96:6258:b240/128"),
},
},
},
want: []netaddr.IPPrefix{
pp("fd7a:115c:a1e0::/48"),
},
},
{
name: "has_2_v6",
peers: []wgcfg.Peer{
{
AllowedIPs: []netaddr.IPPrefix{
pp("fd7a:115c:a1e0:ab12:4843:cd96:6258:b240/128"),
pp("fd7a:115c:a1e0:ab12:4843:cd96:6258:b241/128"),
},
},
},
want: []netaddr.IPPrefix{
pp("fd7a:115c:a1e0::/48"),
},
},
{
name: "big_v4_big_v6",
peers: []wgcfg.Peer{
{
AllowedIPs: []netaddr.IPPrefix{
pp("100.101.102.103/32"),
pp("100.101.102.104/32"),
pp("100.101.102.105/32"),
pp("fd7a:115c:a1e0:ab12:4843:cd96:6258:b240/128"),
pp("fd7a:115c:a1e0:ab12:4843:cd96:6258:b241/128"),
},
},
},
want: []netaddr.IPPrefix{
pp("fd7a:115c:a1e0::/48"),
pp("100.64.0.0/10"),
},
},
}
for _, tt := range tests {
t.Run(tt.name, func(t *testing.T) {
got := peerRoutes(tt.peers, 2)
if !reflect.DeepEqual(got, tt.want) {
t.Errorf("got = %v; want %v", got, tt.want)
}
})
}
}
func TestPeerAPIBase(t *testing.T) {
tests := []struct {
name string
nm *netmap.NetworkMap
peer *tailcfg.Node
want string
}{
{
name: "nil_netmap",
peer: new(tailcfg.Node),
want: "",
},
{
name: "nil_peer",
nm: new(netmap.NetworkMap),
want: "",
},
{
name: "self_only_4_them_both",
nm: &netmap.NetworkMap{
Addresses: []netaddr.IPPrefix{
netaddr.MustParseIPPrefix("100.64.1.1/32"),
},
},
peer: &tailcfg.Node{
Addresses: []netaddr.IPPrefix{
netaddr.MustParseIPPrefix("100.64.1.2/32"),
netaddr.MustParseIPPrefix("fe70::2/128"),
},
Hostinfo: tailcfg.Hostinfo{
Services: []tailcfg.Service{
{Proto: "peerapi4", Port: 444},
{Proto: "peerapi6", Port: 666},
},
},
},
want: "http://100.64.1.2:444",
},
{
name: "self_only_6_them_both",
nm: &netmap.NetworkMap{
Addresses: []netaddr.IPPrefix{
netaddr.MustParseIPPrefix("fe70::1/128"),
},
},
peer: &tailcfg.Node{
Addresses: []netaddr.IPPrefix{
netaddr.MustParseIPPrefix("100.64.1.2/32"),
netaddr.MustParseIPPrefix("fe70::2/128"),
},
Hostinfo: tailcfg.Hostinfo{
Services: []tailcfg.Service{
{Proto: "peerapi4", Port: 444},
{Proto: "peerapi6", Port: 666},
},
},
},
want: "http://[fe70::2]:666",
},
{
name: "self_both_them_only_4",
nm: &netmap.NetworkMap{
Addresses: []netaddr.IPPrefix{
netaddr.MustParseIPPrefix("100.64.1.1/32"),
netaddr.MustParseIPPrefix("fe70::1/128"),
},
},
peer: &tailcfg.Node{
Addresses: []netaddr.IPPrefix{
netaddr.MustParseIPPrefix("100.64.1.2/32"),
netaddr.MustParseIPPrefix("fe70::2/128"),
},
Hostinfo: tailcfg.Hostinfo{
Services: []tailcfg.Service{
{Proto: "peerapi4", Port: 444},
},
},
},
want: "http://100.64.1.2:444",
},
{
name: "self_both_them_only_6",
nm: &netmap.NetworkMap{
Addresses: []netaddr.IPPrefix{
netaddr.MustParseIPPrefix("100.64.1.1/32"),
netaddr.MustParseIPPrefix("fe70::1/128"),
},
},
peer: &tailcfg.Node{
Addresses: []netaddr.IPPrefix{
netaddr.MustParseIPPrefix("100.64.1.2/32"),
netaddr.MustParseIPPrefix("fe70::2/128"),
},
Hostinfo: tailcfg.Hostinfo{
Services: []tailcfg.Service{
{Proto: "peerapi6", Port: 666},
},
},
},
want: "http://[fe70::2]:666",
},
{
name: "self_both_them_no_peerapi_service",
nm: &netmap.NetworkMap{
Addresses: []netaddr.IPPrefix{
netaddr.MustParseIPPrefix("100.64.1.1/32"),
netaddr.MustParseIPPrefix("fe70::1/128"),
},
},
peer: &tailcfg.Node{
Addresses: []netaddr.IPPrefix{
netaddr.MustParseIPPrefix("100.64.1.2/32"),
netaddr.MustParseIPPrefix("fe70::2/128"),
},
},
want: "",
},
}
for _, tt := range tests {
t.Run(tt.name, func(t *testing.T) {
got := peerAPIBase(tt.nm, tt.peer)
if got != tt.want {
t.Errorf("got %q; want %q", got, tt.want)
}
})
}
}

View File

@@ -2,18 +2,20 @@
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package ipn
package ipnlocal
import (
"reflect"
"testing"
"time"
"tailscale.com/control/controlclient"
"tailscale.com/ipn"
"tailscale.com/ipn/ipnstate"
"tailscale.com/logtail"
"tailscale.com/tailcfg"
"tailscale.com/tstest"
"tailscale.com/types/key"
"tailscale.com/types/persist"
"tailscale.com/wgengine"
)
@@ -26,6 +28,7 @@ func TestLocalLogLines(t *testing.T) {
"[v1] peer keys: %s",
"[v1] v%v peers: %v",
})
defer logListen.Close()
logid := func(hex byte) logtail.PublicID {
var ret logtail.PublicID
@@ -37,9 +40,7 @@ func TestLocalLogLines(t *testing.T) {
idA := logid(0xaa)
// set up a LocalBackend, super bare bones. No functional data.
store := &MemoryStore{
cache: make(map[StateKey][]byte),
}
store := &ipn.MemoryStore{}
e, err := wgengine.NewFakeUserspaceEngine(logListen.Logf, 0)
if err != nil {
t.Fatal(err)
@@ -52,7 +53,7 @@ func TestLocalLogLines(t *testing.T) {
defer lb.Shutdown()
// custom adjustments for required non-nil fields
lb.prefs = NewPrefs()
lb.prefs = ipn.NewPrefs()
lb.hostinfo = &tailcfg.Hostinfo{}
// hacky manual override of the usual log-on-change behaviour of keylogf
lb.keyLogf = logListen.Logf
@@ -66,8 +67,8 @@ func TestLocalLogLines(t *testing.T) {
}
// log prefs line
persist := &controlclient.Persist{}
prefs := NewPrefs()
persist := &persist.Persist{}
prefs := ipn.NewPrefs()
prefs.Persist = persist
lb.SetPrefs(prefs)
@@ -75,13 +76,12 @@ func TestLocalLogLines(t *testing.T) {
// log peers, peer keys
status := &wgengine.Status{
Peers: []wgengine.PeerStatus{wgengine.PeerStatus{
Peers: []ipnstate.PeerStatusLite{{
TxBytes: 10,
RxBytes: 10,
LastHandshake: time.Now(),
NodeKey: tailcfg.NodeKey(key.NewPrivate()),
}},
LocalAddrs: []string{"idk an address"},
}
lb.mu.Lock()
lb.parseWgStatusLocked(status)

550
ipn/ipnlocal/peerapi.go Normal file
View File

@@ -0,0 +1,550 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package ipnlocal
import (
"context"
"errors"
"fmt"
"hash/crc32"
"html"
"io"
"net"
"net/http"
"net/url"
"os"
"path"
"path/filepath"
"runtime"
"strconv"
"strings"
"sync"
"time"
"unicode"
"unicode/utf8"
"inet.af/netaddr"
"tailscale.com/client/tailscale/apitype"
"tailscale.com/ipn"
"tailscale.com/net/interfaces"
"tailscale.com/syncs"
"tailscale.com/tailcfg"
"tailscale.com/wgengine"
)
var initListenConfig func(*net.ListenConfig, netaddr.IP, *interfaces.State, string) error
type peerAPIServer struct {
b *LocalBackend
rootDir string
tunName string
selfNode *tailcfg.Node
knownEmpty syncs.AtomicBool
// directFileMode is whether we're writing files directly to a
// download directory (as *.partial files), rather than making
// the frontend retrieve it over localapi HTTP and write it
// somewhere itself. This is used on GUI macOS version.
directFileMode bool
}
const partialSuffix = ".partial"
func validFilenameRune(r rune) bool {
switch r {
case '/':
return false
case '\\', ':', '*', '"', '<', '>', '|':
// Invalid stuff on Windows, but we reject them everywhere
// for now.
// TODO(bradfitz): figure out a better plan. We initially just
// wrote things to disk URL path-escaped, but that's gross
// when debugging, and just moves the problem to callers.
// So now we put the UTF-8 filenames on disk directly as
// sent.
return false
}
return unicode.IsPrint(r)
}
func (s *peerAPIServer) diskPath(baseName string) (fullPath string, ok bool) {
if !utf8.ValidString(baseName) {
return "", false
}
if strings.TrimSpace(baseName) != baseName {
return "", false
}
if len(baseName) > 255 {
return "", false
}
// TODO: validate unicode normalization form too? Varies by platform.
clean := path.Clean(baseName)
if clean != baseName ||
clean == "." || clean == ".." ||
strings.HasSuffix(clean, partialSuffix) {
return "", false
}
for _, r := range baseName {
if !validFilenameRune(r) {
return "", false
}
}
return filepath.Join(s.rootDir, baseName), true
}
// hasFilesWaiting reports whether any files are buffered in the
// tailscaled daemon storage.
func (s *peerAPIServer) hasFilesWaiting() bool {
if s.rootDir == "" || s.directFileMode {
return false
}
if s.knownEmpty.Get() {
// Optimization: this is usually empty, so avoid opening
// the directory and checking. We can't cache the actual
// has-files-or-not values as the macOS/iOS client might
// in the future use+delete the files directly. So only
// keep this negative cache.
return false
}
f, err := os.Open(s.rootDir)
if err != nil {
return false
}
defer f.Close()
for {
des, err := f.ReadDir(10)
for _, de := range des {
if strings.HasSuffix(de.Name(), partialSuffix) {
continue
}
if de.Type().IsRegular() {
return true
}
}
if err == io.EOF {
s.knownEmpty.Set(true)
}
if err != nil {
break
}
}
return false
}
func (s *peerAPIServer) WaitingFiles() (ret []apitype.WaitingFile, err error) {
if s.rootDir == "" {
return nil, errors.New("peerapi disabled; no storage configured")
}
if s.directFileMode {
return nil, nil
}
f, err := os.Open(s.rootDir)
if err != nil {
return nil, err
}
defer f.Close()
for {
des, err := f.ReadDir(10)
for _, de := range des {
name := de.Name()
if strings.HasSuffix(name, partialSuffix) {
continue
}
if de.Type().IsRegular() {
fi, err := de.Info()
if err != nil {
continue
}
ret = append(ret, apitype.WaitingFile{
Name: filepath.Base(name),
Size: fi.Size(),
})
}
}
if err == io.EOF {
break
}
if err != nil {
return nil, err
}
}
return ret, nil
}
func (s *peerAPIServer) DeleteFile(baseName string) error {
if s.rootDir == "" {
return errors.New("peerapi disabled; no storage configured")
}
if s.directFileMode {
return errors.New("deletes not allowed in direct mode")
}
path, ok := s.diskPath(baseName)
if !ok {
return errors.New("bad filename")
}
err := os.Remove(path)
if err != nil && !os.IsNotExist(err) {
return err
}
return nil
}
func (s *peerAPIServer) OpenFile(baseName string) (rc io.ReadCloser, size int64, err error) {
if s.rootDir == "" {
return nil, 0, errors.New("peerapi disabled; no storage configured")
}
if s.directFileMode {
return nil, 0, errors.New("opens not allowed in direct mode")
}
path, ok := s.diskPath(baseName)
if !ok {
return nil, 0, errors.New("bad filename")
}
f, err := os.Open(path)
if err != nil {
return nil, 0, err
}
fi, err := f.Stat()
if err != nil {
f.Close()
return nil, 0, err
}
return f, fi.Size(), nil
}
func (s *peerAPIServer) listen(ip netaddr.IP, ifState *interfaces.State) (ln net.Listener, err error) {
ipStr := ip.String()
var lc net.ListenConfig
if initListenConfig != nil {
// On iOS/macOS, this sets the lc.Control hook to
// setsockopt the interface index to bind to, to get
// out of the network sandbox.
if err := initListenConfig(&lc, ip, ifState, s.tunName); err != nil {
return nil, err
}
if runtime.GOOS == "darwin" || runtime.GOOS == "ios" {
ipStr = ""
}
}
if wgengine.IsNetstack(s.b.e) {
ipStr = ""
}
tcp4or6 := "tcp4"
if ip.Is6() {
tcp4or6 = "tcp6"
}
// Make a best effort to pick a deterministic port number for
// the ip The lower three bytes are the same for IPv4 and IPv6
// Tailscale addresses (at least currently), so we'll usually
// get the same port number on both address families for
// dev/debugging purposes, which is nice. But it's not so
// deterministic that people will bake this into clients.
// We try a few times just in case something's already
// listening on that port (on all interfaces, probably).
for try := uint8(0); try < 5; try++ {
a16 := ip.As16()
hashData := a16[len(a16)-3:]
hashData[0] += try
tryPort := (32 << 10) | uint16(crc32.ChecksumIEEE(hashData))
ln, err = lc.Listen(context.Background(), tcp4or6, net.JoinHostPort(ipStr, strconv.Itoa(int(tryPort))))
if err == nil {
return ln, nil
}
}
// Fall back to random ephemeral port.
return lc.Listen(context.Background(), tcp4or6, net.JoinHostPort(ipStr, "0"))
}
type peerAPIListener struct {
ps *peerAPIServer
ip netaddr.IP
lb *LocalBackend
// ln is the Listener. It can be nil in netstack mode if there are more than
// 1 local addresses (e.g. both an IPv4 and IPv6). When it's nil, port
// and urlStr are still populated.
ln net.Listener
// urlStr is the base URL to access the peer API (http://ip:port/).
urlStr string
// port is just the port of urlStr.
port int
}
func (pln *peerAPIListener) Close() error {
if pln.ln != nil {
return pln.ln.Close()
}
return nil
}
func (pln *peerAPIListener) serve() {
if pln.ln == nil {
return
}
defer pln.ln.Close()
logf := pln.lb.logf
for {
c, err := pln.ln.Accept()
if errors.Is(err, net.ErrClosed) {
return
}
if err != nil {
logf("peerapi.Accept: %v", err)
return
}
ta, ok := c.RemoteAddr().(*net.TCPAddr)
if !ok {
c.Close()
logf("peerapi: unexpected RemoteAddr %#v", c.RemoteAddr())
continue
}
ipp, ok := netaddr.FromStdAddr(ta.IP, ta.Port, "")
if !ok {
logf("peerapi: bogus TCPAddr %#v", ta)
c.Close()
continue
}
peerNode, peerUser, ok := pln.lb.WhoIs(ipp)
if !ok {
logf("peerapi: unknown peer %v", ipp)
c.Close()
continue
}
h := &peerAPIHandler{
ps: pln.ps,
isSelf: pln.ps.selfNode.User == peerNode.User,
remoteAddr: ipp,
peerNode: peerNode,
peerUser: peerUser,
}
httpServer := &http.Server{
Handler: h,
}
go httpServer.Serve(&oneConnListener{Listener: pln.ln, conn: c})
}
}
type oneConnListener struct {
net.Listener
conn net.Conn
}
func (l *oneConnListener) Accept() (c net.Conn, err error) {
c = l.conn
if c == nil {
err = io.EOF
return
}
err = nil
l.conn = nil
return
}
func (l *oneConnListener) Close() error { return nil }
// peerAPIHandler serves the Peer API for a source specific client.
type peerAPIHandler struct {
ps *peerAPIServer
remoteAddr netaddr.IPPort
isSelf bool // whether peerNode is owned by same user as this node
peerNode *tailcfg.Node // peerNode is who's making the request
peerUser tailcfg.UserProfile // profile of peerNode
}
func (h *peerAPIHandler) logf(format string, a ...interface{}) {
h.ps.b.logf("peerapi: "+format, a...)
}
func (h *peerAPIHandler) ServeHTTP(w http.ResponseWriter, r *http.Request) {
if strings.HasPrefix(r.URL.Path, "/v0/put/") {
h.handlePeerPut(w, r)
return
}
who := h.peerUser.DisplayName
fmt.Fprintf(w, `<html>
<meta name="viewport" content="width=device-width, initial-scale=1">
<body>
<h1>Hello, %s (%v)</h1>
This is my Tailscale device. Your device is %v.
`, html.EscapeString(who), h.remoteAddr.IP, html.EscapeString(h.peerNode.ComputedName))
if h.isSelf {
fmt.Fprintf(w, "<p>You are the owner of this node.\n")
}
}
type incomingFile struct {
name string // "foo.jpg"
started time.Time
size int64 // or -1 if unknown; never 0
w io.Writer // underlying writer
ph *peerAPIHandler
partialPath string // non-empty in direct mode
mu sync.Mutex
copied int64
done bool
lastNotify time.Time
}
func (f *incomingFile) markAndNotifyDone() {
f.mu.Lock()
f.done = true
f.mu.Unlock()
b := f.ph.ps.b
b.sendFileNotify()
}
func (f *incomingFile) Write(p []byte) (n int, err error) {
n, err = f.w.Write(p)
b := f.ph.ps.b
var needNotify bool
defer func() {
if needNotify {
b.sendFileNotify()
}
}()
if n > 0 {
f.mu.Lock()
defer f.mu.Unlock()
f.copied += int64(n)
now := time.Now()
if f.lastNotify.IsZero() || now.Sub(f.lastNotify) > time.Second {
f.lastNotify = now
needNotify = true
}
}
return n, err
}
func (f *incomingFile) PartialFile() ipn.PartialFile {
f.mu.Lock()
defer f.mu.Unlock()
return ipn.PartialFile{
Name: f.name,
Started: f.started,
DeclaredSize: f.size,
Received: f.copied,
PartialPath: f.partialPath,
Done: f.done,
}
}
func (h *peerAPIHandler) handlePeerPut(w http.ResponseWriter, r *http.Request) {
if !h.isSelf {
http.Error(w, "not owner", http.StatusForbidden)
return
}
if !h.ps.b.hasCapFileSharing() {
http.Error(w, "file sharing not enabled by Tailscale admin", http.StatusForbidden)
return
}
if r.Method != "PUT" {
http.Error(w, "expected method PUT", http.StatusMethodNotAllowed)
return
}
if h.ps.rootDir == "" {
http.Error(w, "no rootdir", http.StatusInternalServerError)
return
}
rawPath := r.URL.EscapedPath()
suffix := strings.TrimPrefix(rawPath, "/v0/put/")
if suffix == rawPath {
http.Error(w, "misconfigured internals", 500)
return
}
if suffix == "" {
http.Error(w, "empty filename", 400)
return
}
if strings.Contains(suffix, "/") {
http.Error(w, "directories not supported", 400)
return
}
baseName, err := url.PathUnescape(suffix)
if err != nil {
http.Error(w, "bad path encoding", 400)
return
}
dstFile, ok := h.ps.diskPath(baseName)
if !ok {
http.Error(w, "bad filename", 400)
return
}
if h.ps.directFileMode {
dstFile += partialSuffix
}
f, err := os.Create(dstFile)
if err != nil {
h.logf("put Create error: %v", err)
http.Error(w, err.Error(), http.StatusInternalServerError)
return
}
var success bool
defer func() {
if !success {
os.Remove(dstFile)
}
}()
var finalSize int64
var inFile *incomingFile
if r.ContentLength != 0 {
inFile = &incomingFile{
name: baseName,
started: time.Now(),
size: r.ContentLength,
w: f,
ph: h,
}
if h.ps.directFileMode {
inFile.partialPath = dstFile
}
h.ps.b.registerIncomingFile(inFile, true)
defer h.ps.b.registerIncomingFile(inFile, false)
n, err := io.Copy(inFile, r.Body)
if err != nil {
f.Close()
h.logf("put Copy error: %v", err)
http.Error(w, err.Error(), http.StatusInternalServerError)
return
}
finalSize = n
}
if err := f.Close(); err != nil {
h.logf("put Close error: %v", err)
http.Error(w, err.Error(), http.StatusInternalServerError)
return
}
if h.ps.directFileMode {
if inFile != nil { // non-zero length; TODO: notify even for zero length
inFile.markAndNotifyDone()
}
}
h.logf("put of %s from %v/%v", approxSize(finalSize), h.remoteAddr.IP, h.peerNode.ComputedName)
// TODO: set modtime
// TODO: some real response
success = true
io.WriteString(w, "{}\n")
h.ps.knownEmpty.Set(false)
h.ps.b.sendFileNotify()
}
func approxSize(n int64) string {
if n <= 1<<10 {
return "<=1KB"
}
if n <= 1<<20 {
return "<=1MB"
}
return fmt.Sprintf("~%dMB", n/1<<20)
}

View File

@@ -0,0 +1,84 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// +build darwin,redo ios,redo
package ipnlocal
import (
"errors"
"fmt"
"log"
"net"
"strings"
"syscall"
"golang.org/x/sys/unix"
"inet.af/netaddr"
"tailscale.com/net/interfaces"
)
func init() {
initListenConfig = initListenConfigNetworkExtension
peerDialControlFunc = peerDialControlFuncNetworkExtension
}
// initListenConfigNetworkExtension configures nc for listening on IP
// through the iOS/macOS Network/System Extension (Packet Tunnel
// Provider) sandbox.
func initListenConfigNetworkExtension(nc *net.ListenConfig, ip netaddr.IP, st *interfaces.State, tunIfName string) error {
tunIf, ok := st.Interface[tunIfName]
if !ok {
return fmt.Errorf("no interface with name %q", tunIfName)
}
nc.Control = func(network, address string, c syscall.RawConn) error {
var sockErr error
err := c.Control(func(fd uintptr) {
sockErr = bindIf(fd, network, address, tunIf.Index)
log.Printf("peerapi: bind(%q, %q) on index %v = %v", network, address, tunIf.Index, sockErr)
})
if err != nil {
return err
}
return sockErr
}
return nil
}
func bindIf(fd uintptr, network, address string, ifIndex int) error {
v6 := strings.Contains(address, "]:") || strings.HasSuffix(network, "6") // hacky test for v6
proto := unix.IPPROTO_IP
opt := unix.IP_BOUND_IF
if v6 {
proto = unix.IPPROTO_IPV6
opt = unix.IPV6_BOUND_IF
}
return unix.SetsockoptInt(int(fd), proto, opt, ifIndex)
}
func peerDialControlFuncNetworkExtension(b *LocalBackend) func(network, address string, c syscall.RawConn) error {
b.mu.Lock()
defer b.mu.Unlock()
st := b.prevIfState
pas := b.peerAPIServer
index := -1
if st != nil && pas != nil && pas.tunName != "" {
if tunIf, ok := st.Interface[pas.tunName]; ok {
index = tunIf.Index
}
}
return func(network, address string, c syscall.RawConn) error {
if index == -1 {
return errors.New("failed to find TUN interface to bind to")
}
var sockErr error
err := c.Control(func(fd uintptr) {
sockErr = bindIf(fd, network, address, index)
})
if err != nil {
return err
}
return sockErr
}
}

View File

@@ -0,0 +1,424 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package ipnlocal
import (
"bytes"
"fmt"
"io"
"io/fs"
"io/ioutil"
"net/http"
"net/http/httptest"
"os"
"path/filepath"
"strings"
"testing"
"tailscale.com/tailcfg"
"tailscale.com/types/netmap"
)
type peerAPITestEnv struct {
ph *peerAPIHandler
rr *httptest.ResponseRecorder
logBuf bytes.Buffer
}
func (e *peerAPITestEnv) logf(format string, a ...interface{}) {
fmt.Fprintf(&e.logBuf, format, a...)
}
type check func(*testing.T, *peerAPITestEnv)
func checks(vv ...check) []check { return vv }
func httpStatus(wantStatus int) check {
return func(t *testing.T, e *peerAPITestEnv) {
if res := e.rr.Result(); res.StatusCode != wantStatus {
t.Errorf("HTTP response code = %v; want %v", res.Status, wantStatus)
}
}
}
func bodyContains(sub string) check {
return func(t *testing.T, e *peerAPITestEnv) {
if body := e.rr.Body.String(); !strings.Contains(body, sub) {
t.Errorf("HTTP response body does not contain %q; got: %s", sub, body)
}
}
}
func bodyNotContains(sub string) check {
return func(t *testing.T, e *peerAPITestEnv) {
if body := e.rr.Body.String(); strings.Contains(body, sub) {
t.Errorf("HTTP response body unexpectedly contains %q; got: %s", sub, body)
}
}
}
func fileHasSize(name string, size int) check {
return func(t *testing.T, e *peerAPITestEnv) {
root := e.ph.ps.rootDir
if root == "" {
t.Errorf("no rootdir; can't check whether %q has size %v", name, size)
return
}
path := filepath.Join(root, name)
if fi, err := os.Stat(path); err != nil {
t.Errorf("fileHasSize(%q, %v): %v", name, size, err)
} else if fi.Size() != int64(size) {
t.Errorf("file %q has size %v; want %v", name, fi.Size(), size)
}
}
}
func fileHasContents(name string, want string) check {
return func(t *testing.T, e *peerAPITestEnv) {
root := e.ph.ps.rootDir
if root == "" {
t.Errorf("no rootdir; can't check contents of %q", name)
return
}
path := filepath.Join(root, name)
got, err := ioutil.ReadFile(path)
if err != nil {
t.Errorf("fileHasContents: %v", err)
return
}
if string(got) != want {
t.Errorf("file contents = %q; want %q", got, want)
}
}
}
func hexAll(v string) string {
var sb strings.Builder
for i := 0; i < len(v); i++ {
fmt.Fprintf(&sb, "%%%02x", v[i])
}
return sb.String()
}
func TestHandlePeerPut(t *testing.T) {
tests := []struct {
name string
isSelf bool // the peer sending the request is owned by us
capSharing bool // self node has file sharing capabilty
omitRoot bool // don't configure
req *http.Request
checks []check
}{
{
name: "not_peer_api",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("GET", "/", nil),
checks: checks(
httpStatus(200),
bodyContains("This is my Tailscale device."),
bodyContains("You are the owner of this node."),
),
},
{
name: "not_peer_api_not_owner",
isSelf: false,
capSharing: true,
req: httptest.NewRequest("GET", "/", nil),
checks: checks(
httpStatus(200),
bodyContains("This is my Tailscale device."),
bodyNotContains("You are the owner of this node."),
),
},
{
name: "reject_non_owner_put",
isSelf: false,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/foo", nil),
checks: checks(
httpStatus(http.StatusForbidden),
bodyContains("not owner"),
),
},
{
name: "owner_without_cap",
isSelf: true,
capSharing: false,
req: httptest.NewRequest("PUT", "/v0/put/foo", nil),
checks: checks(
httpStatus(http.StatusForbidden),
bodyContains("file sharing not enabled by Tailscale admin"),
),
},
{
name: "owner_with_cap_no_rootdir",
omitRoot: true,
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/foo", nil),
checks: checks(
httpStatus(http.StatusInternalServerError),
bodyContains("no rootdir"),
),
},
{
name: "bad_method",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("POST", "/v0/put/foo", nil),
checks: checks(
httpStatus(405),
bodyContains("expected method PUT"),
),
},
{
name: "put_zero_length",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/foo", nil),
checks: checks(
httpStatus(200),
bodyContains("{}"),
fileHasSize("foo", 0),
fileHasContents("foo", ""),
),
},
{
name: "put_non_zero_length_content_length",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/foo", strings.NewReader("contents")),
checks: checks(
httpStatus(200),
bodyContains("{}"),
fileHasSize("foo", len("contents")),
fileHasContents("foo", "contents"),
),
},
{
name: "put_non_zero_length_chunked",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/foo", struct{ io.Reader }{strings.NewReader("contents")}),
checks: checks(
httpStatus(200),
bodyContains("{}"),
fileHasSize("foo", len("contents")),
fileHasContents("foo", "contents"),
),
},
{
name: "bad_filename_partial",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/foo.partial", nil),
checks: checks(
httpStatus(400),
bodyContains("bad filename"),
),
},
{
name: "bad_filename_dot",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/.", nil),
checks: checks(
httpStatus(400),
bodyContains("bad filename"),
),
},
{
name: "bad_filename_empty",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/", nil),
checks: checks(
httpStatus(400),
bodyContains("empty filename"),
),
},
{
name: "bad_filename_slash",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/foo/bar", nil),
checks: checks(
httpStatus(400),
bodyContains("directories not supported"),
),
},
{
name: "bad_filename_encoded_dot",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/"+hexAll("."), nil),
checks: checks(
httpStatus(400),
bodyContains("bad filename"),
),
},
{
name: "bad_filename_encoded_slash",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/"+hexAll("/"), nil),
checks: checks(
httpStatus(400),
bodyContains("bad filename"),
),
},
{
name: "bad_filename_encoded_backslash",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/"+hexAll("\\"), nil),
checks: checks(
httpStatus(400),
bodyContains("bad filename"),
),
},
{
name: "bad_filename_encoded_dotdot",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/"+hexAll(".."), nil),
checks: checks(
httpStatus(400),
bodyContains("bad filename"),
),
},
{
name: "bad_filename_encoded_dotdot_out",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/"+hexAll("foo/../../../../../etc/passwd"), nil),
checks: checks(
httpStatus(400),
bodyContains("bad filename"),
),
},
{
name: "put_spaces_and_caps",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/"+hexAll("Foo Bar.dat"), strings.NewReader("baz")),
checks: checks(
httpStatus(200),
bodyContains("{}"),
fileHasContents("Foo Bar.dat", "baz"),
),
},
{
name: "put_unicode",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/"+hexAll("Томас и его друзья.mp3"), strings.NewReader("главный озорник")),
checks: checks(
httpStatus(200),
bodyContains("{}"),
fileHasContents("Томас и его друзья.mp3", "главный озорник"),
),
},
{
name: "put_invalid_utf8",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/"+(hexAll("😜")[:3]), nil),
checks: checks(
httpStatus(400),
bodyContains("bad filename"),
),
},
{
name: "put_invalid_null",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/%00", nil),
checks: checks(
httpStatus(400),
bodyContains("bad filename"),
),
},
{
name: "put_invalid_non_printable",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/%01", nil),
checks: checks(
httpStatus(400),
bodyContains("bad filename"),
),
},
{
name: "put_invalid_colon",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/"+hexAll("nul:"), nil),
checks: checks(
httpStatus(400),
bodyContains("bad filename"),
),
},
{
name: "put_invalid_surrounding_whitespace",
isSelf: true,
capSharing: true,
req: httptest.NewRequest("PUT", "/v0/put/"+hexAll(" foo "), nil),
checks: checks(
httpStatus(400),
bodyContains("bad filename"),
),
},
}
for _, tt := range tests {
t.Run(tt.name, func(t *testing.T) {
var caps []string
if tt.capSharing {
caps = append(caps, tailcfg.CapabilityFileSharing)
}
var e peerAPITestEnv
lb := &LocalBackend{
netMap: &netmap.NetworkMap{
SelfNode: &tailcfg.Node{
Capabilities: caps,
},
},
logf: e.logf,
}
e.ph = &peerAPIHandler{
isSelf: tt.isSelf,
peerNode: &tailcfg.Node{
ComputedName: "some-peer-name",
},
ps: &peerAPIServer{
b: lb,
},
}
var rootDir string
if !tt.omitRoot {
rootDir = t.TempDir()
e.ph.ps.rootDir = rootDir
}
e.rr = httptest.NewRecorder()
e.ph.ServeHTTP(e.rr, tt.req)
for _, f := range tt.checks {
f(t, &e)
}
if t.Failed() && rootDir != "" {
t.Logf("Contents of %s:", rootDir)
des, _ := fs.ReadDir(os.DirFS(rootDir), ".")
for _, de := range des {
fi, err := de.Info()
if err != nil {
t.Log(err)
} else {
t.Logf(" %v %5d %s", fi.Mode(), fi.Size(), de.Name())
}
}
}
})
}
}

View File

@@ -19,14 +19,20 @@ import (
"os/signal"
"os/user"
"runtime"
"strconv"
"strings"
"sync"
"sync/atomic"
"syscall"
"time"
"go4.org/mem"
"inet.af/netaddr"
"inet.af/peercred"
"tailscale.com/control/controlclient"
"tailscale.com/ipn"
"tailscale.com/ipn/ipnlocal"
"tailscale.com/ipn/localapi"
"tailscale.com/log/filelogger"
"tailscale.com/logtail/backoff"
"tailscale.com/net/netstat"
@@ -57,16 +63,6 @@ type Options struct {
// waits for a frontend to start it.
AutostartStateKey ipn.StateKey
// LegacyConfigPath optionally specifies the old-style relaynode
// relay.conf location. If both LegacyConfigPath and
// AutostartStateKey are specified and the requested state doesn't
// exist in the backend store, the backend migrates the config
// from LegacyConfigPath.
//
// TODO(danderson): remove some time after the transition to
// tailscaled is done.
LegacyConfigPath string
// SurviveDisconnects specifies how the server reacts to its
// frontend disconnecting. If true, the server keeps running on
// its existing state, and accepts new frontend connections. If
@@ -91,8 +87,9 @@ type Options struct {
// server is an IPN backend and its set of 0 or more active connections
// talking to an IPN backend.
type server struct {
b *ipn.LocalBackend
logf logger.Logf
b *ipnlocal.LocalBackend
logf logger.Logf
backendLogID string
// resetOnZero is whether to call bs.Reset on transition from
// 1->0 connections. That is, this is whether the backend is
// being run in "client mode" that requires an active GUI
@@ -111,21 +108,34 @@ type server struct {
disconnectSub map[chan<- struct{}]struct{} // keys are subscribers of disconnects
}
// connIdentity represents the owner of a localhost TCP connection.
// connIdentity represents the owner of a localhost TCP or unix socket connection.
type connIdentity struct {
Unknown bool
Pid int
UserID string
User *user.User
Conn net.Conn
NotWindows bool // runtime.GOOS != "windows"
// Fields used when NotWindows:
IsUnixSock bool // Conn is a *net.UnixConn
Creds *peercred.Creds // or nil
// Used on Windows:
// TODO(bradfitz): merge these into the peercreds package and
// use that for all.
Pid int
UserID string
User *user.User
}
// getConnIdentity returns the localhost TCP connection's identity information
// (pid, userid, user). If it's not Windows (for now), it returns a nil error
// and a ConnIdentity with Unknown set true. It's only an error if we expected
// and a ConnIdentity with NotWindows set true. It's only an error if we expected
// to be able to map it and couldn't.
func (s *server) getConnIdentity(c net.Conn) (ci connIdentity, err error) {
ci = connIdentity{Conn: c}
if runtime.GOOS != "windows" { // for now; TODO: expand to other OSes
return connIdentity{Unknown: true}, nil
ci.NotWindows = true
_, ci.IsUnixSock = c.(*net.UnixConn)
ci.Creds, _ = peercred.Get(c)
return ci, nil
}
la, err := netaddr.ParseIPPort(c.LocalAddr().String())
if err != nil {
@@ -216,13 +226,22 @@ func (s *server) blockWhileInUse(conn io.Reader, ci connIdentity) {
}
}
// bufferHasHTTPRequest reports whether br looks like it has an HTTP
// request in it, without reading any bytes from it.
func bufferHasHTTPRequest(br *bufio.Reader) bool {
peek, _ := br.Peek(br.Buffered())
return mem.HasPrefix(mem.B(peek), mem.S("GET ")) ||
mem.HasPrefix(mem.B(peek), mem.S("POST ")) ||
mem.Contains(mem.B(peek), mem.S(" HTTP/"))
}
func (s *server) serveConn(ctx context.Context, c net.Conn, logf logger.Logf) {
// First see if it's an HTTP request.
br := bufio.NewReader(c)
c.SetReadDeadline(time.Now().Add(time.Second))
peek, _ := br.Peek(4)
br.Peek(4)
c.SetReadDeadline(time.Time{})
isHTTPReq := string(peek) == "GET "
isHTTPReq := bufferHasHTTPRequest(br)
ci, err := s.addConn(c, isHTTPReq)
if err != nil {
@@ -249,7 +268,7 @@ func (s *server) serveConn(ctx context.Context, c net.Conn, logf logger.Logf) {
s.b.SetCurrentUserID(ci.UserID)
if isHTTPReq {
httpServer := http.Server{
httpServer := &http.Server{
// Localhost connections are cheap; so only do
// keep-alives for a short period of time, as these
// active connections lock the server into only serving
@@ -268,6 +287,10 @@ func (s *server) serveConn(ctx context.Context, c net.Conn, logf logger.Logf) {
defer s.removeAndCloseConn(c)
logf("[v1] incoming control connection")
if isReadonlyConn(ci, s.b.OperatorUserID(), logf) {
ctx = ipn.ReadonlyContextOf(ctx)
}
for ctx.Err() == nil {
msg, err := ipn.ReadMsg(br)
if err != nil {
@@ -279,7 +302,7 @@ func (s *server) serveConn(ctx context.Context, c net.Conn, logf logger.Logf) {
return
}
s.bsMu.Lock()
if err := s.bs.GotCommandMsg(msg); err != nil {
if err := s.bs.GotCommandMsg(ctx, msg); err != nil {
logf("GotCommandMsg: %v", err)
}
gotQuit := s.bs.GotQuit
@@ -290,6 +313,86 @@ func (s *server) serveConn(ctx context.Context, c net.Conn, logf logger.Logf) {
}
}
func isReadonlyConn(ci connIdentity, operatorUID string, logf logger.Logf) bool {
if runtime.GOOS == "windows" {
// Windows doesn't need/use this mechanism, at least yet. It
// has a different last-user-wins auth model.
return false
}
const ro = true
const rw = false
if !safesocket.PlatformUsesPeerCreds() {
return rw
}
creds := ci.Creds
if creds == nil {
logf("connection from unknown peer; read-only")
return ro
}
uid, ok := creds.UserID()
if !ok {
logf("connection from peer with unknown userid; read-only")
return ro
}
if uid == "0" {
logf("connection from userid %v; root has access", uid)
return rw
}
if selfUID := os.Getuid(); selfUID != 0 && uid == strconv.Itoa(selfUID) {
logf("connection from userid %v; connection from non-root user matching daemon has access", uid)
return rw
}
if operatorUID != "" && uid == operatorUID {
logf("connection from userid %v; is configured operator", uid)
return rw
}
var adminGroupID string
switch runtime.GOOS {
case "darwin":
adminGroupID = darwinAdminGroupID()
default:
logf("connection from userid %v; read-only", uid)
return ro
}
if adminGroupID == "" {
logf("connection from userid %v; no system admin group found, read-only", uid)
return ro
}
u, err := user.LookupId(uid)
if err != nil {
logf("connection from userid %v; failed to look up user; read-only", uid)
return ro
}
gids, err := u.GroupIds()
if err != nil {
logf("connection from userid %v; failed to look up groups; read-only", uid)
return ro
}
for _, gid := range gids {
if gid == adminGroupID {
logf("connection from userid %v; is local admin, has access", uid)
return rw
}
}
logf("connection from userid %v; read-only", uid)
return ro
}
var darwinAdminGroupIDCache atomic.Value // of string
func darwinAdminGroupID() string {
s, _ := darwinAdminGroupIDCache.Load().(string)
if s != "" {
return s
}
g, err := user.LookupGroup("admin")
if err != nil {
return ""
}
darwinAdminGroupIDCache.Store(g.Gid)
return g.Gid
}
// inUseOtherUserError is the error type for when the server is in use
// by a different local user.
type inUseOtherUserError struct{ error }
@@ -322,6 +425,25 @@ func (s *server) checkConnIdentityLocked(ci connIdentity) error {
return nil
}
// localAPIPermissions returns the permissions for the given identity accessing
// the Tailscale local daemon API.
//
// s.mu must not be held.
func (s *server) localAPIPermissions(ci connIdentity) (read, write bool) {
if runtime.GOOS == "windows" {
s.mu.Lock()
defer s.mu.Unlock()
if s.checkConnIdentityLocked(ci) == nil {
return true, true
}
return false, false
}
if ci.IsUnixSock {
return true, !isReadonlyConn(ci, s.b.OperatorUserID(), logger.Discard)
}
return false, false
}
// registerDisconnectSub adds ch as a subscribe to connection disconnect
// events. If add is false, the subscriber is removed.
func (s *server) registerDisconnectSub(ch chan<- struct{}, add bool) {
@@ -354,9 +476,7 @@ func (s *server) addConn(c net.Conn, isHTTP bool) (ci connIdentity, err error) {
defer func() {
if doReset {
s.logf("identity changed; resetting server")
s.bsMu.Lock()
s.bs.Reset()
s.bsMu.Unlock()
s.b.ResetForClientDisconnect()
}
}()
@@ -406,9 +526,7 @@ func (s *server) removeAndCloseConn(c net.Conn) {
s.logf("client disconnected; staying alive in server mode")
} else {
s.logf("client disconnected; stopping server")
s.bsMu.Lock()
s.bs.Reset()
s.bsMu.Unlock()
s.b.ResetForClientDisconnect()
}
}
c.Close()
@@ -438,7 +556,7 @@ func (s *server) setServerModeUserLocked() {
s.logf("ipnserver: [unexpected] now in server mode, but no connected client")
return
}
if ci.Unknown {
if ci.NotWindows {
return
}
if ci.User != nil {
@@ -474,6 +592,7 @@ func (s *server) writeToClients(b []byte) {
// Run runs a Tailscale backend service.
// The getEngine func is called repeatedly, once per connection, until it returns an engine successfully.
func Run(ctx context.Context, logf logger.Logf, logid string, getEngine func() (wgengine.Engine, error), opts Options) error {
getEngine = getEngineUntilItWorksWrapper(getEngine)
runDone := make(chan struct{})
defer close(runDone)
@@ -483,8 +602,9 @@ func Run(ctx context.Context, logf logger.Logf, logid string, getEngine func() (
}
server := &server{
logf: logf,
resetOnZero: !opts.SurviveDisconnects,
backendLogID: logid,
logf: logf,
resetOnZero: !opts.SurviveDisconnects,
}
// When the context is closed or when we return, whichever is first, close our listner
@@ -499,6 +619,34 @@ func Run(ctx context.Context, logf logger.Logf, logid string, getEngine func() (
}()
logf("Listening on %v", listen.Addr())
var store ipn.StateStore
if opts.StatePath != "" {
store, err = ipn.NewFileStore(opts.StatePath)
if err != nil {
return fmt.Errorf("ipn.NewFileStore(%q): %v", opts.StatePath, err)
}
if opts.AutostartStateKey == "" {
autoStartKey, err := store.ReadState(ipn.ServerModeStartKey)
if err != nil && err != ipn.ErrStateNotExist {
return fmt.Errorf("calling ReadState on %s: %w", opts.StatePath, err)
}
key := string(autoStartKey)
if strings.HasPrefix(key, "user-") {
uid := strings.TrimPrefix(key, "user-")
u, err := server.lookupUserFromID(uid)
if err != nil {
logf("ipnserver: found server mode auto-start key %q; failed to load user: %v", key, err)
} else {
logf("ipnserver: found server mode auto-start key %q (user %s)", key, u.Username)
server.serverModeUser = u
}
opts.AutostartStateKey = ipn.StateKey(key)
}
}
} else {
store = &ipn.MemoryStore{}
}
bo := backoff.NewBackoff("ipnserver", logf, 30*time.Second)
var unservedConn net.Conn // if non-nil, accepted, but hasn't served yet
@@ -534,35 +682,7 @@ func Run(ctx context.Context, logf logger.Logf, logid string, getEngine func() (
}
}
var store ipn.StateStore
if opts.StatePath != "" {
store, err = ipn.NewFileStore(opts.StatePath)
if err != nil {
return fmt.Errorf("ipn.NewFileStore(%q): %v", opts.StatePath, err)
}
if opts.AutostartStateKey == "" {
autoStartKey, err := store.ReadState(ipn.ServerModeStartKey)
if err != nil && err != ipn.ErrStateNotExist {
return fmt.Errorf("calling ReadState on %s: %w", opts.StatePath, err)
}
key := string(autoStartKey)
if strings.HasPrefix(key, "user-") {
uid := strings.TrimPrefix(key, "user-")
u, err := server.lookupUserFromID(uid)
if err != nil {
logf("ipnserver: found server mode auto-start key %q; failed to load user: %v", key, err)
} else {
logf("ipnserver: found server mode auto-start key %q (user %s)", key, u.Username)
server.serverModeUser = u
}
opts.AutostartStateKey = ipn.StateKey(key)
}
}
} else {
store = &ipn.MemoryStore{}
}
b, err := ipn.NewLocalBackend(logf, logid, store, eng)
b, err := ipnlocal.NewLocalBackend(logf, logid, store, eng)
if err != nil {
return fmt.Errorf("NewLocalBackend: %v", err)
}
@@ -581,13 +701,10 @@ func Run(ctx context.Context, logf logger.Logf, logid string, getEngine func() (
server.bs = ipn.NewBackendServer(logf, b, server.writeToClients)
if opts.AutostartStateKey != "" {
server.bs.GotCommand(&ipn.Command{
server.bs.GotCommand(context.TODO(), &ipn.Command{
Version: version.Long,
Start: &ipn.StartArgs{
Opts: ipn.Options{
StateKey: opts.AutostartStateKey,
LegacyConfigPath: opts.LegacyConfigPath,
},
Opts: ipn.Options{StateKey: opts.AutostartStateKey},
},
})
}
@@ -752,6 +869,27 @@ func FixedEngine(eng wgengine.Engine) func() (wgengine.Engine, error) {
return func() (wgengine.Engine, error) { return eng, nil }
}
// getEngineUntilItWorksWrapper returns a getEngine wrapper that does
// not call getEngine concurrently and stops calling getEngine once
// it's returned a working engine.
func getEngineUntilItWorksWrapper(getEngine func() (wgengine.Engine, error)) func() (wgengine.Engine, error) {
var mu sync.Mutex
var engGood wgengine.Engine
return func() (wgengine.Engine, error) {
mu.Lock()
defer mu.Unlock()
if engGood != nil {
return engGood, nil
}
e, err := getEngine()
if err != nil {
return nil, err
}
engGood = e
return e, nil
}
}
type dummyAddr string
type oneConnListener struct {
conn net.Conn
@@ -793,8 +931,15 @@ func (psc *protoSwitchConn) Close() error {
}
func (s *server) localhostHandler(ci connIdentity) http.Handler {
lah := localapi.NewHandler(s.b, s.logf, s.backendLogID)
lah.PermitRead, lah.PermitWrite = s.localAPIPermissions(ci)
return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
if ci.Unknown {
if strings.HasPrefix(r.URL.Path, "/localapi/") {
lah.ServeHTTP(w, r)
return
}
if ci.NotWindows {
io.WriteString(w, "<html><title>Tailscale</title><body><h1>Tailscale</h1>This is the local Tailscale daemon.")
return
}
@@ -802,7 +947,7 @@ func (s *server) localhostHandler(ci connIdentity) http.Handler {
})
}
func serveHTMLStatus(w http.ResponseWriter, b *ipn.LocalBackend) {
func serveHTMLStatus(w http.ResponseWriter, b *ipnlocal.LocalBackend) {
w.Header().Set("Content-Type", "text/html; charset=utf-8")
st := b.Status()
// TODO(bradfitz): add LogID and opts to st?

View File

@@ -21,14 +21,30 @@ import (
"inet.af/netaddr"
"tailscale.com/tailcfg"
"tailscale.com/types/key"
"tailscale.com/util/dnsname"
)
// Status represents the entire state of the IPN network.
type Status struct {
// Version is the daemon's long version (see version.Long).
Version string
// BackendState is an ipn.State string value:
// "NoState", "NeedsLogin", "NeedsMachineAuth", "Stopped",
// "Starting", "Running".
BackendState string
AuthURL string // current URL provided by control to authorize client
TailscaleIPs []netaddr.IP // Tailscale IP(s) assigned to this node
Self *PeerStatus
// MagicDNSSuffix is the network's MagicDNS suffix for nodes
// in the network such as "userfoo.tailscale.net".
// There are no surrounding dots.
// MagicDNSSuffix should be populated regardless of whether a domain
// has MagicDNS enabled.
MagicDNSSuffix string
Peer map[key.Public]*PeerStatus
User map[tailcfg.UserID]tailcfg.UserProfile
}
@@ -42,6 +58,12 @@ func (s *Status) Peers() []key.Public {
return kk
}
type PeerStatusLite struct {
TxBytes, RxBytes int64
LastHandshake time.Time
NodeKey tailcfg.NodeKey
}
type PeerStatus struct {
PublicKey key.Public
HostName string // HostInfo's Hostname (not a DNS name or necessarily unique)
@@ -49,7 +71,8 @@ type PeerStatus struct {
OS string // HostInfo.OS
UserID tailcfg.UserID
TailAddr string // Tailscale IP
TailAddrDeprecated string `json:"TailAddr"` // Tailscale IP
TailscaleIPs []netaddr.IP // Tailscale IP(s) assigned to this node
// Endpoints:
Addrs []string
@@ -63,6 +86,10 @@ type PeerStatus struct {
LastSeen time.Time // last seen to tailcontrol
LastHandshake time.Time // with local wireguard
KeepAlive bool
ExitNode bool // true if this is the currently selected exit node.
PeerAPIURL []string
Capabilities []string `json:",omitempty"`
// ShareeNode indicates this node exists in the netmap because
// it's owned by a shared-to user and that node might connect
@@ -83,24 +110,22 @@ type PeerStatus struct {
InEngine bool
}
// SimpleHostName returns a potentially simplified version of ps.HostName for display purposes.
func (ps *PeerStatus) SimpleHostName() string {
n := ps.HostName
n = strings.TrimSuffix(n, ".local")
n = strings.TrimSuffix(n, ".localdomain")
return n
}
type StatusBuilder struct {
mu sync.Mutex
locked bool
st Status
}
func (sb *StatusBuilder) SetBackendState(v string) {
// MutateStatus calls f with the status to mutate.
//
// It may not assume other fields of status are already populated, and
// may not retain or write to the Status after f returns.
//
// MutateStatus acquires a lock so f must not call back into sb.
func (sb *StatusBuilder) MutateStatus(f func(*Status)) {
sb.mu.Lock()
defer sb.mu.Unlock()
sb.st.BackendState = v
f(&sb.st)
}
func (sb *StatusBuilder) Status() *Status {
@@ -110,11 +135,19 @@ func (sb *StatusBuilder) Status() *Status {
return &sb.st
}
// SetSelfStatus sets the status of the local machine.
func (sb *StatusBuilder) SetSelfStatus(ss *PeerStatus) {
// MutateSelfStatus calls f with the PeerStatus of our own node to mutate.
//
// It may not assume other fields of status are already populated, and
// may not retain or write to the Status after f returns.
//
// MutateStatus acquires a lock so f must not call back into sb.
func (sb *StatusBuilder) MutateSelfStatus(f func(*PeerStatus)) {
sb.mu.Lock()
defer sb.mu.Unlock()
sb.st.Self = ss
if sb.st.Self == nil {
sb.st.Self = new(PeerStatus)
}
f(sb.st.Self)
}
// AddUser adds a user profile to the status.
@@ -182,8 +215,11 @@ func (sb *StatusBuilder) AddPeer(peer key.Public, st *PeerStatus) {
if v := st.UserID; v != 0 {
e.UserID = v
}
if v := st.TailAddr; v != "" {
e.TailAddr = v
if v := st.TailAddrDeprecated; v != "" {
e.TailAddrDeprecated = v
}
if v := st.TailscaleIPs; v != nil {
e.TailscaleIPs = v
}
if v := st.OS; v != "" {
e.OS = st.OS
@@ -224,6 +260,9 @@ func (sb *StatusBuilder) AddPeer(peer key.Public, st *PeerStatus) {
if st.KeepAlive {
e.KeepAlive = true
}
if st.ExitNode {
e.ExitNode = true
}
if st.ShareeNode {
e.ShareeNode = true
}
@@ -267,13 +306,22 @@ table tbody tr:nth-child(even) td { background-color: #f5f5f5; }
f("<p>Tailscale IP: %s", strings.Join(ips, ", "))
f("<table>\n<thead>\n")
f("<tr><th>Peer</th><th>Node</th><th>Owner</th><th>Rx</th><th>Tx</th><th>Activity</th><th>Endpoints</th></tr>\n")
f("<tr><th>Peer</th><th>OS</th><th>Node</th><th>Owner</th><th>Rx</th><th>Tx</th><th>Activity</th><th>Connection</th></tr>\n")
f("</thead>\n<tbody>\n")
now := time.Now()
var peers []*PeerStatus
for _, peer := range st.Peers() {
ps := st.Peer[peer]
if ps.ShareeNode {
continue
}
peers = append(peers, ps)
}
SortPeers(peers)
for _, ps := range peers {
var actAgo string
if !ps.LastWrite.IsZero() {
ago := now.Sub(ps.LastWrite)
@@ -289,40 +337,45 @@ table tbody tr:nth-child(even) td { background-color: #f5f5f5; }
owner = owner[:i]
}
}
f("<tr><td>%s</td><td>%s %s<br><span class=\"tailaddr\">%s</span></td><td class=\"acenter owner\">%s</td><td class=\"aright\">%v</td><td class=\"aright\">%v</td><td class=\"aright\">%v</td>",
peer.ShortString(),
html.EscapeString(ps.SimpleHostName()),
hostName := dnsname.SanitizeHostname(ps.HostName)
dnsName := dnsname.TrimSuffix(ps.DNSName, st.MagicDNSSuffix)
if strings.EqualFold(dnsName, hostName) || ps.UserID != st.Self.UserID {
hostName = ""
}
var hostNameHTML string
if hostName != "" {
hostNameHTML = "<br>" + html.EscapeString(hostName)
}
var tailAddr string
if len(ps.TailscaleIPs) > 0 {
tailAddr = ps.TailscaleIPs[0].String()
}
f("<tr><td>%s</td><td class=acenter>%s</td>"+
"<td><b>%s</b>%s<div class=\"tailaddr\">%s</div></td><td class=\"acenter owner\">%s</td><td class=\"aright\">%v</td><td class=\"aright\">%v</td><td class=\"aright\">%v</td>",
ps.PublicKey.ShortString(),
osEmoji(ps.OS),
ps.TailAddr,
html.EscapeString(dnsName),
hostNameHTML,
tailAddr,
html.EscapeString(owner),
ps.RxBytes,
ps.TxBytes,
actAgo,
)
f("<td class=\"aright\">")
f("<td>")
// TODO: let server report this active bool instead
active := !ps.LastWrite.IsZero() && time.Since(ps.LastWrite) < 2*time.Minute
relay := ps.Relay
if relay != "" {
if active && ps.CurAddr == "" {
f("🔗 <b>derp-%v</b><br>", html.EscapeString(relay))
} else {
f("derp-%v<br>", html.EscapeString(relay))
if active {
if ps.Relay != "" && ps.CurAddr == "" {
f("relay <b>%s</b>", html.EscapeString(ps.Relay))
} else if ps.CurAddr != "" {
f("direct <b>%s</b>", html.EscapeString(ps.CurAddr))
}
}
match := false
for _, addr := range ps.Addrs {
if addr == ps.CurAddr {
match = true
f("🔗 <b>%s</b><br>", addr)
} else {
f("%s<br>", addr)
}
}
if ps.CurAddr != "" && !match {
f("<b>%s</b> \xf0\x9f\xa7\xb3<br>", ps.CurAddr)
}
f("</td>") // end Addrs
f("</tr>\n")
@@ -361,10 +414,41 @@ type PingResult struct {
Err string
LatencySeconds float64
Endpoint string // ip:port if direct UDP was used
// Endpoint is the ip:port if direct UDP was used.
// It is not currently set for TSMP pings.
Endpoint string
DERPRegionID int // non-zero if DERP was used
DERPRegionCode string // three-letter airport/region code if DERP was used
// DERPRegionID is non-zero DERP region ID if DERP was used.
// It is not currently set for TSMP pings.
DERPRegionID int
// DERPRegionCode is the three-letter region code
// corresponding to DERPRegionID.
// It is not currently set for TSMP pings.
DERPRegionCode string
// PeerAPIPort is set by TSMP ping responses for peers that
// are running a peerapi server. This is the port they're
// running the server on.
PeerAPIPort uint16 `json:",omitempty"`
// TODO(bradfitz): details like whether port mapping was used on either side? (Once supported)
}
func SortPeers(peers []*PeerStatus) {
sort.Slice(peers, func(i, j int) bool { return sortKey(peers[i]) < sortKey(peers[j]) })
}
func sortKey(ps *PeerStatus) string {
if ps.DNSName != "" {
return ps.DNSName
}
if ps.HostName != "" {
return ps.HostName
}
// TODO(bradfitz): add PeerStatus.Less and avoid these allocs in a Less func.
if len(ps.TailscaleIPs) > 0 {
return ps.TailscaleIPs[0].String()
}
return string(ps.PublicKey[:])
}

File diff suppressed because it is too large Load Diff

441
ipn/localapi/localapi.go Normal file
View File

@@ -0,0 +1,441 @@
// Copyright (c) 2021 Tailscale Inc & AUTHORS All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Package localapi contains the HTTP server handlers for tailscaled's API server.
package localapi
import (
"crypto/rand"
"encoding/hex"
"encoding/json"
"errors"
"fmt"
"io"
"net"
"net/http"
"net/http/httputil"
"net/url"
"reflect"
"runtime"
"strconv"
"strings"
"sync"
"time"
"inet.af/netaddr"
"tailscale.com/client/tailscale/apitype"
"tailscale.com/ipn"
"tailscale.com/ipn/ipnlocal"
"tailscale.com/ipn/ipnstate"
"tailscale.com/tailcfg"
"tailscale.com/types/logger"
)
func randHex(n int) string {
b := make([]byte, n)
rand.Read(b)
return hex.EncodeToString(b)
}
func NewHandler(b *ipnlocal.LocalBackend, logf logger.Logf, logID string) *Handler {
return &Handler{b: b, logf: logf, backendLogID: logID}
}
type Handler struct {
// RequiredPassword, if non-empty, forces all HTTP
// requests to have HTTP basic auth with this password.
// It's used by the sandboxed macOS sameuserproof GUI auth mechanism.
RequiredPassword string
// PermitRead is whether read-only HTTP handlers are allowed.
PermitRead bool
// PermitWrite is whether mutating HTTP handlers are allowed.
PermitWrite bool
b *ipnlocal.LocalBackend
logf logger.Logf
backendLogID string
}
func (h *Handler) ServeHTTP(w http.ResponseWriter, r *http.Request) {
if h.b == nil {
http.Error(w, "server has no local backend", http.StatusInternalServerError)
return
}
if h.RequiredPassword != "" {
_, pass, ok := r.BasicAuth()
if !ok {
http.Error(w, "auth required", http.StatusUnauthorized)
return
}
if pass != h.RequiredPassword {
http.Error(w, "bad password", http.StatusForbidden)
return
}
}
if strings.HasPrefix(r.URL.Path, "/localapi/v0/files/") {
h.serveFiles(w, r)
return
}
if strings.HasPrefix(r.URL.Path, "/localapi/v0/file-put/") {
h.serveFilePut(w, r)
return
}
switch r.URL.Path {
case "/localapi/v0/whois":
h.serveWhoIs(w, r)
case "/localapi/v0/goroutines":
h.serveGoroutines(w, r)
case "/localapi/v0/status":
h.serveStatus(w, r)
case "/localapi/v0/logout":
h.serveLogout(w, r)
case "/localapi/v0/prefs":
h.servePrefs(w, r)
case "/localapi/v0/check-ip-forwarding":
h.serveCheckIPForwarding(w, r)
case "/localapi/v0/bugreport":
h.serveBugReport(w, r)
case "/localapi/v0/file-targets":
h.serveFileTargets(w, r)
case "/":
io.WriteString(w, "tailscaled\n")
default:
http.Error(w, "404 not found", 404)
}
}
func (h *Handler) serveBugReport(w http.ResponseWriter, r *http.Request) {
if !h.PermitRead {
http.Error(w, "bugreport access denied", http.StatusForbidden)
return
}
logMarker := fmt.Sprintf("BUG-%v-%v-%v", h.backendLogID, time.Now().UTC().Format("20060102150405Z"), randHex(8))
h.logf("user bugreport: %s", logMarker)
if note := r.FormValue("note"); len(note) > 0 {
h.logf("user bugreport note: %s", note)
}
w.Header().Set("Content-Type", "text/plain")
fmt.Fprintln(w, logMarker)
}
func (h *Handler) serveWhoIs(w http.ResponseWriter, r *http.Request) {
if !h.PermitRead {
http.Error(w, "whois access denied", http.StatusForbidden)
return
}
b := h.b
var ipp netaddr.IPPort
if v := r.FormValue("addr"); v != "" {
var err error
ipp, err = netaddr.ParseIPPort(v)
if err != nil {
http.Error(w, "invalid 'addr' parameter", 400)
return
}
} else {
http.Error(w, "missing 'addr' parameter", 400)
return
}
n, u, ok := b.WhoIs(ipp)
if !ok {
http.Error(w, "no match for IP:port", 404)
return
}
res := &apitype.WhoIsResponse{
Node: n,
UserProfile: &u,
}
j, err := json.MarshalIndent(res, "", "\t")
if err != nil {
http.Error(w, "JSON encoding error", 500)
return
}
w.Header().Set("Content-Type", "application/json")
w.Write(j)
}
func (h *Handler) serveGoroutines(w http.ResponseWriter, r *http.Request) {
// Require write access out of paranoia that the goroutine dump
// (at least its arguments) might contain something sensitive.
if !h.PermitWrite {
http.Error(w, "goroutine dump access denied", http.StatusForbidden)
return
}
buf := make([]byte, 2<<20)
buf = buf[:runtime.Stack(buf, true)]
w.Header().Set("Content-Type", "text/plain")
w.Write(buf)
}
func (h *Handler) serveCheckIPForwarding(w http.ResponseWriter, r *http.Request) {
if !h.PermitRead {
http.Error(w, "IP forwarding check access denied", http.StatusForbidden)
return
}
var warning string
if err := h.b.CheckIPForwarding(); err != nil {
warning = err.Error()
}
w.Header().Set("Content-Type", "application/json")
json.NewEncoder(w).Encode(struct {
Warning string
}{
Warning: warning,
})
}
func (h *Handler) serveStatus(w http.ResponseWriter, r *http.Request) {
if !h.PermitRead {
http.Error(w, "status access denied", http.StatusForbidden)
return
}
w.Header().Set("Content-Type", "application/json")
var st *ipnstate.Status
if defBool(r.FormValue("peers"), true) {
st = h.b.Status()
} else {
st = h.b.StatusWithoutPeers()
}
e := json.NewEncoder(w)
e.SetIndent("", "\t")
e.Encode(st)
}
func (h *Handler) serveLogout(w http.ResponseWriter, r *http.Request) {
if !h.PermitWrite {
http.Error(w, "logout access denied", http.StatusForbidden)
return
}
if r.Method != "POST" {
http.Error(w, "want POST", 400)
return
}
err := h.b.LogoutSync(r.Context())
if err == nil {
w.WriteHeader(http.StatusNoContent)
return
}
http.Error(w, err.Error(), 500)
}
func (h *Handler) servePrefs(w http.ResponseWriter, r *http.Request) {
if !h.PermitRead {
http.Error(w, "prefs access denied", http.StatusForbidden)
return
}
var prefs *ipn.Prefs
switch r.Method {
case "PATCH":
if !h.PermitWrite {
http.Error(w, "prefs write access denied", http.StatusForbidden)
return
}
mp := new(ipn.MaskedPrefs)
if err := json.NewDecoder(r.Body).Decode(mp); err != nil {
http.Error(w, err.Error(), 400)
return
}
var err error
prefs, err = h.b.EditPrefs(mp)
if err != nil {
http.Error(w, err.Error(), 400)
return
}
case "GET", "HEAD":
prefs = h.b.Prefs()
default:
http.Error(w, "unsupported method", http.StatusMethodNotAllowed)
return
}
w.Header().Set("Content-Type", "application/json")
e := json.NewEncoder(w)
e.SetIndent("", "\t")
e.Encode(prefs)
}
func (h *Handler) serveFiles(w http.ResponseWriter, r *http.Request) {
if !h.PermitWrite {
http.Error(w, "file access denied", http.StatusForbidden)
return
}
suffix := strings.TrimPrefix(r.URL.Path, "/localapi/v0/files/")
if suffix == "" {
if r.Method != "GET" {
http.Error(w, "want GET to list files", 400)
return
}
wfs, err := h.b.WaitingFiles()
if err != nil {
http.Error(w, err.Error(), 500)
return
}
w.Header().Set("Content-Type", "application/json")
json.NewEncoder(w).Encode(wfs)
return
}
name, err := url.PathUnescape(suffix)
if err != nil {
http.Error(w, "bad filename", 400)
return
}
if r.Method == "DELETE" {
if err := h.b.DeleteFile(name); err != nil {
http.Error(w, err.Error(), 500)
return
}
w.WriteHeader(http.StatusNoContent)
return
}
rc, size, err := h.b.OpenFile(name)
if err != nil {
http.Error(w, err.Error(), 500)
return
}
defer rc.Close()
w.Header().Set("Content-Length", fmt.Sprint(size))
io.Copy(w, rc)
}
func writeErrorJSON(w http.ResponseWriter, err error) {
if err == nil {
err = errors.New("unexpected nil error")
}
w.Header().Set("Content-Type", "application/json")
w.WriteHeader(500)
type E struct {
Error string `json:"error"`
}
json.NewEncoder(w).Encode(E{err.Error()})
}
func (h *Handler) serveFileTargets(w http.ResponseWriter, r *http.Request) {
if !h.PermitRead {
http.Error(w, "access denied", http.StatusForbidden)
return
}
if r.Method != "GET" {
http.Error(w, "want GET to list targets", 400)
return
}
fts, err := h.b.FileTargets()
if err != nil {
writeErrorJSON(w, err)
return
}
makeNonNil(&fts)
w.Header().Set("Content-Type", "application/json")
json.NewEncoder(w).Encode(fts)
}
func (h *Handler) serveFilePut(w http.ResponseWriter, r *http.Request) {
if !h.PermitWrite {
http.Error(w, "file access denied", http.StatusForbidden)
return
}
if r.Method != "PUT" {
http.Error(w, "want PUT to put file", 400)
return
}
fts, err := h.b.FileTargets()
if err != nil {
http.Error(w, err.Error(), 500)
return
}
upath := strings.TrimPrefix(r.URL.EscapedPath(), "/localapi/v0/file-put/")
slash := strings.Index(upath, "/")
if slash == -1 {
http.Error(w, "bogus URL", 400)
return
}
stableID, filenameEscaped := tailcfg.StableNodeID(upath[:slash]), upath[slash+1:]
var ft *apitype.FileTarget
for _, x := range fts {
if x.Node.StableID == stableID {
ft = x
break
}
}
if ft == nil {
http.Error(w, "node not found", 404)
return
}
dstURL, err := url.Parse(ft.PeerAPIURL)
if err != nil {
http.Error(w, "bogus peer URL", 500)
return
}
outReq, err := http.NewRequestWithContext(r.Context(), "PUT", "http://peer/v0/put/"+filenameEscaped, r.Body)
if err != nil {
http.Error(w, "bogus outreq", 500)
return
}
outReq.ContentLength = r.ContentLength
rp := httputil.NewSingleHostReverseProxy(dstURL)
rp.Transport = getDialPeerTransport(h.b)
rp.ServeHTTP(w, outReq)
}
var dialPeerTransportOnce struct {
sync.Once
v *http.Transport
}
func getDialPeerTransport(b *ipnlocal.LocalBackend) *http.Transport {
dialPeerTransportOnce.Do(func() {
t := http.DefaultTransport.(*http.Transport).Clone()
t.Dial = nil //lint:ignore SA1019 yes I know I'm setting it to nil defensively
dialer := net.Dialer{
Timeout: 30 * time.Second,
KeepAlive: 30 * time.Second,
Control: b.PeerDialControlFunc(),
}
t.DialContext = dialer.DialContext
dialPeerTransportOnce.v = t
})
return dialPeerTransportOnce.v
}
func defBool(a string, def bool) bool {
if a == "" {
return def
}
v, err := strconv.ParseBool(a)
if err != nil {
return def
}
return v
}
// makeNonNil takes a pointer to a Go data structure
// (currently only a slice or a map) and makes sure it's non-nil for
// JSON serialization. (In particular, JavaScript clients usually want
// the field to be defined after they decode the JSON.)
func makeNonNil(ptr interface{}) {
if ptr == nil {
panic("nil interface")
}
rv := reflect.ValueOf(ptr)
if rv.Kind() != reflect.Ptr {
panic(fmt.Sprintf("kind %v, not Ptr", rv.Kind()))
}
if rv.Pointer() == 0 {
panic("nil pointer")
}
rv = rv.Elem()
if rv.Pointer() != 0 {
return
}
switch rv.Type().Kind() {
case reflect.Slice:
rv.Set(reflect.MakeSlice(rv.Type(), 0, 0))
case reflect.Map:
rv.Set(reflect.MakeMap(rv.Type()))
}
}

View File

@@ -6,6 +6,7 @@ package ipn
import (
"bytes"
"context"
"encoding/binary"
"encoding/json"
"errors"
@@ -14,12 +15,30 @@ import (
"log"
"time"
"golang.org/x/oauth2"
"tailscale.com/tailcfg"
"tailscale.com/types/logger"
"tailscale.com/types/structs"
"tailscale.com/version"
)
type readOnlyContextKey struct{}
// IsReadonlyContext reports whether ctx is a read-only context, as currently used
// by Unix non-root users running the "tailscale" CLI command. They can run "status",
// but not much else.
func IsReadonlyContext(ctx context.Context) bool {
return ctx.Value(readOnlyContextKey{}) != nil
}
// ReadonlyContextOf returns ctx wrapped with a context value that
// will make IsReadonlyContext reports true.
func ReadonlyContextOf(ctx context.Context) context.Context {
if IsReadonlyContext(ctx) {
return ctx
}
return context.WithValue(ctx, readOnlyContextKey{}, readOnlyContextKey{})
}
var jsonEscapedZero = []byte(`\u0000`)
type NoArgs struct{}
@@ -37,7 +56,8 @@ type FakeExpireAfterArgs struct {
}
type PingArgs struct {
IP string
IP string
UseTSMP bool
}
// Command is a command message that is JSON encoded and sent by a
@@ -57,10 +77,9 @@ type Command struct {
Quit *NoArgs
Start *StartArgs
StartLoginInteractive *NoArgs
Login *oauth2.Token
Login *tailcfg.Oauth2Token
Logout *NoArgs
SetPrefs *SetPrefsArgs
SetWantRunning *bool
RequestEngineStatus *NoArgs
RequestStatus *NoArgs
FakeExpireAfter *FakeExpireAfterArgs
@@ -75,11 +94,13 @@ type BackendServer struct {
}
func NewBackendServer(logf logger.Logf, b Backend, sendNotifyMsg func(b []byte)) *BackendServer {
return &BackendServer{
bs := &BackendServer{
logf: logf,
b: b,
sendNotifyMsg: sendNotifyMsg,
}
b.SetNotifyCallback(bs.send)
return bs
}
func (bs *BackendServer) send(n Notify) {
@@ -111,7 +132,7 @@ func (bs *BackendServer) SendInUseOtherUserErrorMessage(msg string) {
// GotCommandMsg parses the incoming message b as a JSON Command and
// calls GotCommand with it.
func (bs *BackendServer) GotCommandMsg(b []byte) error {
func (bs *BackendServer) GotCommandMsg(ctx context.Context, b []byte) error {
cmd := &Command{}
if len(b) == 0 {
return nil
@@ -119,15 +140,14 @@ func (bs *BackendServer) GotCommandMsg(b []byte) error {
if err := json.Unmarshal(b, cmd); err != nil {
return err
}
return bs.GotCommand(cmd)
return bs.GotCommand(ctx, cmd)
}
func (bs *BackendServer) GotFakeCommand(cmd *Command) error {
cmd.Version = version.Long
return bs.GotCommand(cmd)
}
// ErrMsgPermissionDenied is the Notify.ErrMessage value used an
// operation was done from a user/context that didn't have permission.
const ErrMsgPermissionDenied = "permission denied"
func (bs *BackendServer) GotCommand(cmd *Command) error {
func (bs *BackendServer) GotCommand(ctx context.Context, cmd *Command) error {
if cmd.Version != version.Long && !cmd.AllowVersionSkew {
vs := fmt.Sprintf("GotCommand: Version mismatch! frontend=%#v backend=%#v",
cmd.Version, version.Long)
@@ -141,14 +161,31 @@ func (bs *BackendServer) GotCommand(cmd *Command) error {
})
return nil
}
// TODO(bradfitz): finish plumbing context down to all the methods below;
// currently we just check for read-only contexts in this method and
// then never use contexts again.
// Actions permitted with a read-only context:
if c := cmd.RequestEngineStatus; c != nil {
bs.b.RequestEngineStatus()
return nil
} else if c := cmd.Ping; c != nil {
bs.b.Ping(c.IP, c.UseTSMP)
return nil
}
if IsReadonlyContext(ctx) {
msg := ErrMsgPermissionDenied
bs.send(Notify{ErrMessage: &msg})
return nil
}
if cmd.Quit != nil {
bs.GotQuit = true
return errors.New("Quit command received")
}
if c := cmd.Start; c != nil {
} else if c := cmd.Start; c != nil {
opts := c.Opts
opts.Notify = bs.send
return bs.b.Start(opts)
} else if c := cmd.StartLoginInteractive; c != nil {
bs.b.StartLoginInteractive()
@@ -162,30 +199,11 @@ func (bs *BackendServer) GotCommand(cmd *Command) error {
} else if c := cmd.SetPrefs; c != nil {
bs.b.SetPrefs(c.New)
return nil
} else if c := cmd.SetWantRunning; c != nil {
bs.b.SetWantRunning(*c)
return nil
} else if c := cmd.RequestEngineStatus; c != nil {
bs.b.RequestEngineStatus()
return nil
} else if c := cmd.RequestStatus; c != nil {
bs.b.RequestStatus()
return nil
} else if c := cmd.FakeExpireAfter; c != nil {
bs.b.FakeExpireAfter(c.Duration)
return nil
} else if c := cmd.Ping; c != nil {
bs.b.Ping(c.IP)
return nil
} else {
return fmt.Errorf("BackendServer.Do: no command specified")
}
}
func (bs *BackendServer) Reset() error {
// Tell the backend we got a Logout command, which will cause it
// to forget all its authentication information.
return bs.GotFakeCommand(&Command{Logout: &NoArgs{}})
return fmt.Errorf("BackendServer.Do: no command specified")
}
type BackendClient struct {
@@ -215,7 +233,7 @@ func (bc *BackendClient) GotNotifyMsg(b []byte) {
}
n := Notify{}
if err := json.Unmarshal(b, &n); err != nil {
log.Fatalf("BackendClient.Notify: cannot decode message (length=%d)\n%#v", len(b), string(b))
log.Fatalf("BackendClient.Notify: cannot decode message (length=%d, %#q): %v", len(b), b, err)
}
if n.Version != version.Long && !bc.AllowVersionSkew {
vs := fmt.Sprintf("GotNotify: Version mismatch! frontend=%#v backend=%#v",
@@ -255,8 +273,6 @@ func (bc *BackendClient) Quit() error {
}
func (bc *BackendClient) Start(opts Options) error {
bc.notify = opts.Notify
opts.Notify = nil // server can't call our function pointer
bc.send(Command{Start: &StartArgs{Opts: opts}})
return nil // remote Start() errors must be handled remotely
}
@@ -265,7 +281,7 @@ func (bc *BackendClient) StartLoginInteractive() {
bc.send(Command{StartLoginInteractive: &NoArgs{}})
}
func (bc *BackendClient) Login(token *oauth2.Token) {
func (bc *BackendClient) Login(token *tailcfg.Oauth2Token) {
bc.send(Command{Login: token})
}
@@ -289,12 +305,11 @@ func (bc *BackendClient) FakeExpireAfter(x time.Duration) {
bc.send(Command{FakeExpireAfter: &FakeExpireAfterArgs{Duration: x}})
}
func (bc *BackendClient) Ping(ip string) {
bc.send(Command{Ping: &PingArgs{IP: ip}})
}
func (bc *BackendClient) SetWantRunning(v bool) {
bc.send(Command{SetWantRunning: &v})
func (bc *BackendClient) Ping(ip string, useTSMP bool) {
bc.send(Command{Ping: &PingArgs{
IP: ip,
UseTSMP: useTSMP,
}})
}
// MaxMessageSize is the maximum message size, in bytes.

View File

@@ -6,18 +6,17 @@ package ipn
import (
"bytes"
"context"
"testing"
"time"
"golang.org/x/oauth2"
"tailscale.com/tailcfg"
"tailscale.com/tstest"
)
func TestReadWrite(t *testing.T) {
tstest.PanicOnLog()
rc := tstest.NewResourceCheck()
defer rc.Assert(t)
tstest.ResourceCheck(t)
buf := bytes.Buffer{}
err := WriteMsg(&buf, []byte("Test string1"))
@@ -63,9 +62,7 @@ func TestReadWrite(t *testing.T) {
func TestClientServer(t *testing.T) {
tstest.PanicOnLog()
rc := tstest.NewResourceCheck()
defer rc.Assert(t)
tstest.ResourceCheck(t)
b := &FakeBackend{}
var bs *BackendServer
@@ -81,7 +78,7 @@ func TestClientServer(t *testing.T) {
serverToClientCh <- append([]byte{}, b...)
}
clientToServer := func(b []byte) {
bs.GotCommandMsg(b)
bs.GotCommandMsg(context.TODO(), b)
}
slogf := func(fmt string, args ...interface{}) {
t.Logf("s: "+fmt, args...)
@@ -93,13 +90,11 @@ func TestClientServer(t *testing.T) {
bc = NewBackendClient(clogf, clientToServer)
ch := make(chan Notify, 256)
h, err := NewHandle(bc, clogf, Options{
notify := func(n Notify) { ch <- n }
h, err := NewHandle(bc, clogf, notify, Options{
Prefs: &Prefs{
ControlURL: "http://example.com/fake",
},
Notify: func(n Notify) {
ch <- n
},
})
if err != nil {
t.Fatalf("NewHandle error: %v\n", err)
@@ -179,7 +174,7 @@ func TestClientServer(t *testing.T) {
h.Logout()
flushUntil(NeedsLogin)
h.Login(&oauth2.Token{
h.Login(&tailcfg.Oauth2Token{
AccessToken: "google_id_token",
TokenType: GoogleIDTokenType,
})

View File

@@ -6,12 +6,17 @@
// shared between the node client & control server.
package policy
import "tailscale.com/tailcfg"
import (
"tailscale.com/tailcfg"
)
// IsInterestingService reports whether service s on the given operating
// system (a version.OS value) is an interesting enough port to report
// to our peer nodes for discovery purposes.
func IsInterestingService(s tailcfg.Service, os string) bool {
if s.Proto == "peerapi4" || s.Proto == "peerapi6" {
return true
}
if s.Proto != tailcfg.TCP {
return false
}

View File

@@ -12,24 +12,37 @@ import (
"log"
"os"
"path/filepath"
"reflect"
"runtime"
"strings"
"inet.af/netaddr"
"tailscale.com/atomicfile"
"tailscale.com/control/controlclient"
"tailscale.com/wgengine/router"
"tailscale.com/tailcfg"
"tailscale.com/types/persist"
"tailscale.com/types/preftype"
)
//go:generate go run tailscale.com/cmd/cloner -type=Prefs -output=prefs_clone.go
// DefaultControlURL returns the URL base of the control plane
// ("coordination server") for use when no explicit one is configured.
// The default control plane is the hosted version run by Tailscale.com.
const DefaultControlURL = "https://login.tailscale.com"
// Prefs are the user modifiable settings of the Tailscale node agent.
type Prefs struct {
// ControlURL is the URL of the control server to use.
//
// If empty, the default for new installs, DefaultControlURL
// is used. It's set non-empty once the daemon has been started
// for the first time.
ControlURL string
// RouteAll specifies whether to accept subnet and default routes
// advertised by other nodes on the Tailscale network.
// RouteAll specifies whether to accept subnets advertised by
// other nodes on the Tailscale network. Note that this does not
// include default routes (0.0.0.0/0 and ::/0), those are
// controlled by ExitNodeID/IP below.
RouteAll bool
// AllowSingleHosts specifies whether to install routes for each
@@ -44,6 +57,28 @@ type Prefs struct {
// packets stop flowing. What's up with that?
AllowSingleHosts bool
// ExitNodeID and ExitNodeIP specify the node that should be used
// as an exit node for internet traffic. At most one of these
// should be non-zero.
//
// The preferred way to express the chosen node is ExitNodeID, but
// in some cases it's not possible to use that ID (e.g. in the
// linux CLI, before tailscaled has a netmap). For those
// situations, we allow specifying the exit node by IP, and
// ipnlocal.LocalBackend will translate the IP into an ID when the
// node is found in the netmap.
//
// If the selected exit node doesn't exist (e.g. it's not part of
// the current tailnet), or it doesn't offer exit node services, a
// blackhole route will be installed on the local system to
// prevent any traffic escaping to the local network.
ExitNodeID tailcfg.StableNodeID
ExitNodeIP netaddr.IP
// ExitNodeAllowLANAccess indicates whether locally accessible subnets should be
// routed directly or via the exit node.
ExitNodeAllowLANAccess bool
// CorpDNS specifies whether to install the Tailscale network's
// DNS configuration, if it exists.
CorpDNS bool
@@ -116,14 +151,87 @@ type Prefs struct {
// NetfilterMode specifies how much to manage netfilter rules for
// Tailscale, if at all.
NetfilterMode router.NetfilterMode
NetfilterMode preftype.NetfilterMode
// OperatorUser is the local machine user name who is allowed to
// operate tailscaled without being root or using sudo.
OperatorUser string `json:",omitempty"`
// The Persist field is named 'Config' in the file for backward
// compatibility with earlier versions.
// TODO(apenwarr): We should move this out of here, it's not a pref.
// We can maybe do that once we're sure which module should persist
// it (backend or frontend?)
Persist *controlclient.Persist `json:"Config"`
Persist *persist.Persist `json:"Config"`
}
// MaskedPrefs is a Prefs with an associated bitmask of which fields are set.
type MaskedPrefs struct {
Prefs
ControlURLSet bool `json:",omitempty"`
RouteAllSet bool `json:",omitempty"`
AllowSingleHostsSet bool `json:",omitempty"`
ExitNodeIDSet bool `json:",omitempty"`
ExitNodeIPSet bool `json:",omitempty"`
ExitNodeAllowLANAccessSet bool `json:",omitempty"`
CorpDNSSet bool `json:",omitempty"`
WantRunningSet bool `json:",omitempty"`
ShieldsUpSet bool `json:",omitempty"`
AdvertiseTagsSet bool `json:",omitempty"`
HostnameSet bool `json:",omitempty"`
OSVersionSet bool `json:",omitempty"`
DeviceModelSet bool `json:",omitempty"`
NotepadURLsSet bool `json:",omitempty"`
ForceDaemonSet bool `json:",omitempty"`
AdvertiseRoutesSet bool `json:",omitempty"`
NoSNATSet bool `json:",omitempty"`
NetfilterModeSet bool `json:",omitempty"`
OperatorUserSet bool `json:",omitempty"`
}
// ApplyEdits mutates p, assigning fields from m.Prefs for each MaskedPrefs
// Set field that's true.
func (p *Prefs) ApplyEdits(m *MaskedPrefs) {
if p == nil {
panic("can't edit nil Prefs")
}
pv := reflect.ValueOf(p).Elem()
mv := reflect.ValueOf(m).Elem()
mpv := reflect.ValueOf(&m.Prefs).Elem()
fields := mv.NumField()
for i := 1; i < fields; i++ {
if mv.Field(i).Bool() {
newFieldValue := mpv.Field(i - 1)
pv.Field(i - 1).Set(newFieldValue)
}
}
}
func (m *MaskedPrefs) Pretty() string {
if m == nil {
return "MaskedPrefs{<nil>}"
}
var sb strings.Builder
sb.WriteString("MaskedPrefs{")
mv := reflect.ValueOf(m).Elem()
mt := mv.Type()
mpv := reflect.ValueOf(&m.Prefs).Elem()
first := true
for i := 1; i < mt.NumField(); i++ {
name := mt.Field(i).Name
if mv.Field(i).Bool() {
if !first {
sb.WriteString(" ")
}
first = false
fmt.Fprintf(&sb, "%s=%#v",
strings.TrimSuffix(name, "Set"),
mpv.Field(i-1).Interface())
}
}
sb.WriteString("}")
return sb.String()
}
// IsEmpty reports whether p is nil or pointing to a Prefs zero value.
@@ -147,6 +255,11 @@ func (p *Prefs) pretty(goos string) string {
if p.ShieldsUp {
sb.WriteString("shields=true ")
}
if !p.ExitNodeIP.IsZero() {
fmt.Fprintf(&sb, "exit=%v lan=%t ", p.ExitNodeIP, p.ExitNodeAllowLANAccess)
} else if !p.ExitNodeID.IsZero() {
fmt.Fprintf(&sb, "exit=%v lan=%t ", p.ExitNodeID, p.ExitNodeAllowLANAccess)
}
if len(p.AdvertiseRoutes) > 0 || goos == "linux" {
fmt.Fprintf(&sb, "routes=%v ", p.AdvertiseRoutes)
}
@@ -159,9 +272,15 @@ func (p *Prefs) pretty(goos string) string {
if goos == "linux" {
fmt.Fprintf(&sb, "nf=%v ", p.NetfilterMode)
}
if p.ControlURL != "" && p.ControlURL != "https://login.tailscale.com" {
if p.ControlURL != "" && p.ControlURL != DefaultControlURL {
fmt.Fprintf(&sb, "url=%q ", p.ControlURL)
}
if p.Hostname != "" {
fmt.Fprintf(&sb, "host=%q ", p.Hostname)
}
if p.OperatorUser != "" {
fmt.Fprintf(&sb, "op=%q ", p.OperatorUser)
}
if p.Persist != nil {
sb.WriteString(p.Persist.Pretty())
} else {
@@ -191,12 +310,16 @@ func (p *Prefs) Equals(p2 *Prefs) bool {
p.ControlURL == p2.ControlURL &&
p.RouteAll == p2.RouteAll &&
p.AllowSingleHosts == p2.AllowSingleHosts &&
p.ExitNodeID == p2.ExitNodeID &&
p.ExitNodeIP == p2.ExitNodeIP &&
p.ExitNodeAllowLANAccess == p2.ExitNodeAllowLANAccess &&
p.CorpDNS == p2.CorpDNS &&
p.WantRunning == p2.WantRunning &&
p.NotepadURLs == p2.NotepadURLs &&
p.ShieldsUp == p2.ShieldsUp &&
p.NoSNAT == p2.NoSNAT &&
p.NetfilterMode == p2.NetfilterMode &&
p.OperatorUser == p2.OperatorUser &&
p.Hostname == p2.Hostname &&
p.OSVersion == p2.OSVersion &&
p.DeviceModel == p2.DeviceModel &&
@@ -230,20 +353,36 @@ func compareStrings(a, b []string) bool {
return true
}
// NewPrefs returns the default preferences to use.
func NewPrefs() *Prefs {
// Provide default values for options which might be missing
// from the json data for any reason. The json can still
// override them to false.
return &Prefs{
// Provide default values for options which might be missing
// from the json data for any reason. The json can still
// override them to false.
ControlURL: "https://login.tailscale.com",
// ControlURL is explicitly not set to signal that
// it's not yet configured, which relaxes the CLI "up"
// safety net features. It will get set to DefaultControlURL
// on first up. Or, if not, DefaultControlURL will be used
// later anyway.
ControlURL: "",
RouteAll: true,
AllowSingleHosts: true,
CorpDNS: true,
WantRunning: true,
NetfilterMode: router.NetfilterOn,
WantRunning: false,
NetfilterMode: preftype.NetfilterOn,
}
}
// ControlURLOrDefault returns the coordination server's URL base.
// If not configured, DefaultControlURL is returned instead.
func (p *Prefs) ControlURLOrDefault() string {
if p.ControlURL != "" {
return p.ControlURL
}
return DefaultControlURL
}
// PrefsFromBytes deserializes Prefs from a JSON blob. If
// enforceDefaults is true, Prefs.RouteAll and Prefs.AllowSingleHosts
// are forced on.
@@ -252,7 +391,7 @@ func PrefsFromBytes(b []byte, enforceDefaults bool) (*Prefs, error) {
if len(b) == 0 {
return p, nil
}
persist := &controlclient.Persist{}
persist := &persist.Persist{}
err := json.Unmarshal(b, persist)
if err == nil && (persist.Provider != "" || persist.LoginName != "") {
// old-style relaynode config; import it
@@ -296,7 +435,7 @@ func SavePrefs(filename string, p *Prefs) {
log.Printf("Saving prefs %v %v\n", filename, p.Pretty())
data := p.ToBytes()
os.MkdirAll(filepath.Dir(filename), 0700)
if err := atomicfile.WriteFile(filename, data, 0666); err != nil {
if err := atomicfile.WriteFile(filename, data, 0600); err != nil {
log.Printf("SavePrefs: %v\n", err)
}
}

View File

@@ -8,8 +8,9 @@ package ipn
import (
"inet.af/netaddr"
"tailscale.com/control/controlclient"
"tailscale.com/wgengine/router"
"tailscale.com/tailcfg"
"tailscale.com/types/persist"
"tailscale.com/types/preftype"
)
// Clone makes a deep copy of Prefs.
@@ -23,7 +24,7 @@ func (src *Prefs) Clone() *Prefs {
dst.AdvertiseTags = append(src.AdvertiseTags[:0:0], src.AdvertiseTags...)
dst.AdvertiseRoutes = append(src.AdvertiseRoutes[:0:0], src.AdvertiseRoutes...)
if dst.Persist != nil {
dst.Persist = new(controlclient.Persist)
dst.Persist = new(persist.Persist)
*dst.Persist = *src.Persist
}
return dst
@@ -32,20 +33,24 @@ func (src *Prefs) Clone() *Prefs {
// A compilation failure here means this code must be regenerated, with command:
// tailscale.com/cmd/cloner -type Prefs
var _PrefsNeedsRegeneration = Prefs(struct {
ControlURL string
RouteAll bool
AllowSingleHosts bool
CorpDNS bool
WantRunning bool
ShieldsUp bool
AdvertiseTags []string
Hostname string
OSVersion string
DeviceModel string
NotepadURLs bool
ForceDaemon bool
AdvertiseRoutes []netaddr.IPPrefix
NoSNAT bool
NetfilterMode router.NetfilterMode
Persist *controlclient.Persist
ControlURL string
RouteAll bool
AllowSingleHosts bool
ExitNodeID tailcfg.StableNodeID
ExitNodeIP netaddr.IP
ExitNodeAllowLANAccess bool
CorpDNS bool
WantRunning bool
ShieldsUp bool
AdvertiseTags []string
Hostname string
OSVersion string
DeviceModel string
NotepadURLs bool
ForceDaemon bool
AdvertiseRoutes []netaddr.IPPrefix
NoSNAT bool
NetfilterMode preftype.NetfilterMode
OperatorUser string
Persist *persist.Persist
}{})

Some files were not shown because too many files have changed in this diff Show More